Related
I just got my 8125, and i upgraded to the aku 2.2 rom and then i couldnt run any new programs for some reason, so i downgraded, and ran the lokiwiz/unlock tool, and then upgraded to the aku 2.2 rom again. and now im waiting for it to finish setting up. is that the correct way to usually do these upgrades? thanks for the help!
CID unlock is what allows you to install unsigned apps, as well as downgrade your ROM and use other vendor's ROMs.
thanks!
CID Unlock
Can you please tell me where you found / downloaded the CID unlock software?
Thank you.
Re: CID Unlock
jerebo said:
Can you please tell me where you found / downloaded the CID unlock software?
Thank you.
Click to expand...
Click to collapse
I recommend using lokiwiz 0.2b for CID unlocking. It's in the first post of this thread. However in order to use it, you must be using an AKU 1.x ROM. If you have already upgraded to AKU 2 then use the instructions here. However, if you have upgraded to an AKU 2.2 or greater ROM then there is currently no known way to CID unlock your phone. I hope this helps you a bit ^_^
I'm currently on Summiter's custom ROM 2.17.7.2 and assumed upgrading to this ROM confirmed that my device was CID unlocked.. I guess this is not the case, but will I be able to follow the instructions in the post above without issues because I am still below 2.2?
do you guys know what rom/aku/cid/whatever the cingular 8125 comes with? i'm going to buy one off ebay and am worried it'll be the latest craziest thing that loki wont be able to unlock. although i've read a lot of "it worked on my 8125" posts.
CIDunlock or Unlock or Both?
Hi People,
I've used the lokiwiz to unlock my phone. But the most important question is what is the difference between the options.
I first used the C to superCID my phone. Guess that worked.
After that also did a Unlock worked fine as well.
But what is the difference between Unlock and CID unlock?
is unlock for the SIMlock and cid unlock for other rom upgrades?
Is the CID unlock sufficient to CID unlock and Simunlock my Vario?
Menu looks like this:
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: U
Thanks in advance.
Hi,
I have a new MDA from T-Mobile which I updated to the 2.26 official t-mobile upgrade. I would to back up the device to a mini-sd card from the bootloader; however, am not able to cid-unlock the device (aWizard fails during the write step), and the bootloader is giving me a security level violation error.
Is there a (safe) way to CID-Unlock the device? If not, how else can I do a full backup and guaranteed restore from a mini SD card? I apologize if this has been answered before... I tried to read through the forum however, could not find anything definitive.
Thanks
cid unlocking t-mobile mda
Hi,
I'm from the Netherlands and have exact the same problem.
Can't cid unlock my t-mobile mda.
So if there is an solution i'm interested.
This is the only solution yet: http://www.imei-check.co.uk/m3000unlock.php
Read the following link:
http://forum.xda-developers.com/viewtopic.php?t=50768&postdays=0&postorder=asc&start=175
Lokiwiz Issues:
Winnie:
Thanks for your response. I tried Lokiwiz. With Lokiwiz 0.3a (LokiwizMsl.bat) and that provided the SIM unlock code. However, I could not figure out a way to CID unlock with the Lokiwiz 0.3a tool. Lokiwiz 0.2b fails to CID unlock the phone. Again, I apologize if I am missing the obvious, however, what am I doing wrong?
Thanks
You're not doing anything wrong. The latest lokiwiz does not include the CID unlock feature, and the last version that does will not unlock 2.25 and above. It may not work on earlier ones either, but I know I have 2.25 and it's not working.
Re: Lokiwiz Issues:
Opppsss....I guess the poster on the link I gave you meant to be SIM Unlock not CID Unlock. I appologize. I just re-read the link and realized that. I'm sorry.
I think the only solution is to CID unlock before you upgrade to ROM 2.26. I read from some other threads as well that this upgrade does not require you to redo the CID unlock. Could anyone confirm me on this?
Thanks
acerbix said:
Winnie:
Thanks for your response. I tried Lokiwiz. With Lokiwiz 0.3a (LokiwizMsl.bat) and that provided the SIM unlock code. However, I could not figure out a way to CID unlock with the Lokiwiz 0.3a tool. Lokiwiz 0.2b fails to CID unlock the phone. Again, I apologize if I am missing the obvious, however, what am I doing wrong?
Thanks
Click to expand...
Click to collapse
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Hi,
Thanks for your responses: Is there a way to downgrade to an official 1.08 ROM, and then CID unlock the device, and then bump back up to a 2.26 ROM?
Thanks
i was thinkin of doin that. when i bought my mda it came with the 1.8 rom, and i upgraded it to 2.26. now i be wantin to cid unlock it.
so i was thinkin of tryin to install the 1.8 rom and cid unlock it. but the question is will the 1.8 rom install properly after 2.26 is installed
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
kyphur said:
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Click to expand...
Click to collapse
ah well, that sounds like a massive pain in the ass... i dont have the patience for that anyways i already bought a card specifically to back up the rom in any case, and i dont doubt that the wizard community will come up with something. in the meantime, ive got no major hangups with 2.26, besides the occasional freeze
kyphur said:
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Click to expand...
Click to collapse
ah well, that sounds like a massive pain in the ass... i dont have the patience for that anyways i already bought a card specifically to back up the rom in any case, and i dont doubt that the wizard community will come up with something. in the meantime, ive got no major hangups with 2.26, besides the occasional freeze
i'm not sure is here the place to post this thread.
yesterday i have flashed my HTC to new rom 1.35.255.2. before that i have unlocked my extrom and worked flawlessly. but now with the new rom i can only unhide the rom, i can't unlock it. i tryed all known registry hacks and locks and no result.
can anybody with 1.35.255.2 rom on htc help me to unlock it.
10x!
p.s. sry for the english
You need to make your device SuperCID first, then you can unlock the ExtROM. Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unhide_Extrom
http://forum.xda-developers.com/showthread.php?t=283750
wow i have to downgrade to bootloader 1.04 i think is too long procedure and risky for 10mb. i'll wait and buy 2gb microsd card...
thanks anyway!
Hi all,
I updated my Vodafone Rom to latest HTC HERMES_HTC_WWE 1.35.255.2 & Ext Rom. I am now running on SPL-1.09.
If i wanted to re-run the same ROM i would of thought that it would be OK as all is the same. I did all the unlocking before doing the upgrade when it was on original Vadafone Rom....
Reason is that i want to wipe and restart from scratch.
Thanks for any words of wisdom.
should be safe to reapply the same rom upgrade... but for what you say, you should better do a hard reset, no need to reflash again.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Thanks alot that has worked a treat.
Also is this a known issue or not - I actually had a full backup from the previous day and decided to restore that - but once it completed i was unable to get a phone signal god knows why - is this common?
using sbp backup
cheers
madnutter said:
If i wanted to re-run the same ROM i would of thought that it would be OK as all is the same. I did all the unlocking before doing the upgrade when it was on original Vadafone Rom....
QUOTE]
Quoting myself - how silly!
Managed top figure out how to use the Mtty.exe utility today and have discovered that the HTC_Hermes_SIM_Unlock_v2a.zip did not actually set my CID to SuperCID as intended but left it as Vodap001 - I guess the reason for INVALID VENDOR ID.
I have notice that the original ROM that came with the Phone has been uploaded - HER_VODA_1201616_1030600_UK_SHIP.exe which is BL1.04
I am to understand that i can apply this if necessary to Downgrade ROM and BL from current 1.09 -> 1.04???
Click to expand...
Click to collapse
madnutter said:
I am to understand that i can apply this if necessary to Downgrade ROM and BL from current 1.09 -> 1.04???
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Bootloader 1.09 DOES NOT allow DOWNGRADING of itself by means of flashing earlier ROMs. Once installed it is IMPOSSIBLE to DOWNGRADE SPL 1.09 to 1.06 or 1.04 by regular means!
pof said:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Bootloader 1.09 DOES NOT allow DOWNGRADING of itself by means of flashing earlier ROMs. Once installed it is IMPOSSIBLE to DOWNGRADE SPL 1.09 to 1.06 or 1.04 by regular means!
Click to expand...
Click to collapse
But on this post where you mention of the Shipped ROM, you state
"Notes on this ROM:
This is the current shipping ROM for v1605 Vodafone UK devices, it has bootloader 1.04 and CID VODAP001, so it can be used to downgrade these devices to priced bootloader 1.04 "
But reading the post over the last week i was under the impression that the Bootloader would not be done - 'until i read the recent post mentioned above'.
Thanks anyway
Sorry my fault: only 1.06 can be downgraded by flashing a rom mathcing the CID containing 1.04 bootloader, 1.09 doesn't allow itself to downgrade. I edited the post you mention and added the "1.06" part now
Hello! I want to upgrade my Qtek 9100 with the latest ROM version. I have the official Qtek ROM 2.17.7.2 WWE, IPL/SPL 2.17, Radio 02.07.10 and AKU 2.0. Where can I find the latest official Qtek ROM?
How does the IPL/SPL influence 9100's performance or stability? I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version? Can I damage the Qtek?
And the most important thing: I want the latest official AKU installed on my Qtek. Can it be installed separately from ROM? Where can I find it? If it can't be installed separately, please help me to find the latest official Qtek 9100 ROM packed with the latest official AKU version.
One more question: Is the radio version a good one? Is there a better version? Can this be installed separately?
I think that is best for PDA that AKU, IPL/SPL and radio to be installed with ROM, not separately. Is that true?
Thank you very much!
Look at you men!!!
are you insane?
Jajajaj read men!
but as I am very good person I will tell you where you need to read ok?
First!!!!
Where can I find the latest official Qtek ROM?
Click to expand...
Click to collapse
So i think you were found the 3.08 is good but is not recomended yet.... ok.
Second!!!!
How does the IPL/SPL influence 9100's performance or stability?
Click to expand...
Click to collapse
It don't influence in nothing my men! nothing... why... because AKU (Actualization Kit Update) was just for wm5 ok? its like you wanna see if XP SP3 works well with your new Windows Vista Ultimate edition...
But you need to read the tutorial first to know how to downgrade first to1.01 then unlock, then upgrade to 2.XX not 3.08 ok?, then to a new WM6.1 rom ok...
Third!!!!
I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version?
Click to expand...
Click to collapse
Ok you found the 3.08... yes you can but is more important ask... what chipset do you have? G3 or G4? please provide us with this info first... i saw you have 2.12. bal bla bla so is a G3 but confirm cause some people said I have IPL SPL 2.17 and NOT they have 2.17.0001 (G4) and they has a bricked phone... so the only way to upgrade or change the IPL or SPL is flashing an Original ROM maded by your carrier and for your chipset ok? well... so the answer for this question is NO men!
Fourth!!!!
Can I damage the Qtek?
Click to expand...
Click to collapse
Yes the IPL and SPL changing system is the problem for all thats why people bricks their phones so please dont use it cause it wont lets you perform speed or something ok? AKU's was History Now! the world of WinMobile rules the 6.1 with .Net compact 3.5
Fifth!!!!
Can it be installed separately from ROM? Where can I find it? If it can't be installed separately, please help me to find the latest official Qtek 9100 ROM packed with the latest official AKU version.
Click to expand...
Click to collapse
No is not the most impoprtant question is the same but all in one hahahaha
No you cant upgrade separately... aku is history so dont try to upgrade stay in Aku 2.XX after your unlock process ofcourse and read a lot men you need to read a lot!
Oh sorry i forget something... you have the last the 3.08 AKU 3 (3.08)
The AKU2 comes with A2DP stereo sound bluetooth via Headsets
The AKU3 comes with A2DP and Direct Push tecnologies... so... they never works in WM6 or 6.1 why? cause it already have it by default....
Hope it answers all your question and please men I cant tell you where to go if goes to G3 tutorial for unlock or G4 hardSPL cause you dont have read to fill your signature with your info so...
Be cool men and Good luck we are here to support!!!!
No, I haven't found 3.08 ROM. It's only IPL/SPL 3.08. I have found T-Mobile 2.26 and I don't know if it's good or not. Does T-Mobile ROM differs from Qtek ROM? Thanks!
So...
So... what do you mean with this...
I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version?
Click to expand...
Click to collapse
The IPL and SPL cant be found separately men!
where is the one you found post the link please...
I have found T-Mobile 2.26 and I don't know if it's good or not. Does T-Mobile ROM differs from Qtek ROM?
Click to expand...
Click to collapse
Men!!!
With the Original ROM T-mobile 2.26 you will have the 2.26 IPL and SPL...
And with the Original ROM T-mobile 3.08 you will have the 3.08 IPL and SPL...
This components arent separately.... Never!
It diffiers from Qtek in many things like... some apps... Splash screens.... Configurations... and many little things.
Here all recomends to Use the T-mobile Rom 2.26 to Upgrade after the unlock process cause is the best Original BASE rom ( is the same but is highly recomended that after unlocks the CID and SIM use the IPL and SPL 2.26)
I have found the 3.08 IPL/SPL in the unlocking thread...I'l give you the link latter because I am in a hurry.
If I want to flash the T-mobile 2.26 over Qtek's 2.17, I have to go back to 1.05 ROM and CID unlock, or I have to install the 2.26 over 2.17?
How about with battery life in T-Mobile 2.26 when using wireless and bluetooth? When using only GSM, the battery drains fast?
Thank you very much!
I think here...
Here is your link... so
http://forum.xda-developers.com/showthread.php?t=311027
Whatever...
You are on qteks original 2.17 is it truth?
So... first of all downgrade to 1.05 (you dont need to upgrade to SPL 2.26)and do the unlocking process, if everything is ok...
second... upgrade to 2.26... then your favorite Coocked Rom by whoever you want ok?
third... everytime you want to upgrade or change your rom is highly recomended to flash first an Original ROM qtek 2.17... Tmobile 2.26 or 3.08 then your new Rom coocked ok?
You can change for every Original to Custom and viceversa now, and you dont need to downgrade again to 1.XX again cause its unlocked forever.
Hope it respeonds your doubts... The issue on many ROMs for this kind of things dont be the same on Original ROMS (I didn see issues on originals, well maybe the speed and performance), and many chefs recomends Three steps to upgrade if you experiments this batt drain issue:
1.-Before the NEW rom, Downgrade to any original
2.-Be sure your Batt is FULL I mean (100%)
3.-Let your device synchronize fully when it starts after an upgrade ( I mean dont unplug at the end of upgrade procedure)
Ohhhhhhhhhhhhh
God damn ****!!!!!
Men wait a minute you are G4!!!!!!!!!!!!!
You dont need to do this unlocking proces ok?
it will be brick your device
Your device is G4!!!!!!!!!!
You need to go to G4 forum and perform the HardSPL Patch ask there....
Well my prays was listening hahahahaha
Because you write your info on your signature we avoid to brick your device
forget all this ****n thread and start again asking on G4 forum please god damn!!!!!!!!!!!!!!
I have a G3 device and I have CID unlocked my phone before, when I upgraded from Button 1.5.4.2 to Qtek 2.17 (I have followed the steps in the upgrading "manual" from here http://forum.xda-developers.com/showthread.php?t=285435). So, I think I don't need to go back to 1.05, unlock and then install 2.26. All I have to do is simply to upgrade T-Mobile 2.26 over Qtek 2.17 with RUU utility.
Now, I don't know how T-mobile 2.26 will influence my phone's settings regarding that I live in Romania and I am a Cosmote mobile network user, not T-Mobile. I have seen on a web site that you can not connect to Wi-Fi hot-spot if the hot-spot isn't from T-Mobile. Is T-Mobile ROM 2.26 restricting the phone's settings and the choice to freely connect to wireless hotspot or Cosmote GPRS and MMS, Orange EDGE and MMS. Can I add new SMS, MMS or GPRS/EDGE settings? Or they force you to use their settings and data connections?
Thank you very much!
So xtrange
The IPL and SPL you have on your signature are for a G4.
No it is recognized by the SIM Card... i mean the sms and cellphone conections but mms gprs and other things yes... you need the configurations separately...
So T-Mobile ROM will work OK with Cosmote network... But does T-Mobile ROM restricts any of the device's function? Can I use all it's function freely (wi-fi, bluetooth, irda -I'm asking you this because I have played with an HTC Prophet from T-Mobile that wasn't wi-fi enabled)? Can I install all kind of programs? Do you know anything about battery life?
In a previous post, you said that after CID Unlock it is recomended to use IPL/SPL 2.26. Can you, please, tell me why?
About G3/G4 chip: when I have verified chip version on SYSTEM-DEVICE INFO it showed M-System G3. Now It only show M-System without the G3. Don't know why...
Thank you very much for your help!
Andrei__1 said:
So T-Mobile ROM will work OK with Cosmote network... But does T-Mobile ROM restricts any of the device's function? Can I use all it's function freely (wi-fi, bluetooth, irda -I'm asking you this because I have played with an HTC Prophet from T-Mobile that wasn't wi-fi enabled)? Can I install all kind of programs? Do you know anything about battery life?
In a previous post, you said that after CID Unlock it is recomended to use IPL/SPL 2.26. Can you, please, tell me why?
About G3/G4 chip: when I have verified chip version on SYSTEM-DEVICE INFO it showed M-System G3. Now It only show M-System without the G3. Don't know why...
Thank you very much for your help!
Click to expand...
Click to collapse
IPL/SPL: 2.17.0000
These are G3 Bootloaders,if it was 2.17.0001,then it wud have been a G4,therefore,your device is a G3 phone.nothing to worry about.
Now,you can flash any official roms to it as all the officiall roms like Qtek,t-mobile Cingular or O2 are basically the same roms provided by the Microsoft,they have the same Base Roms,but just all the vendors add up their own stuff to it.Like Splash screens,programs/applications and network/gprs settings.Apart from these ,there is no major difference in any Official rom from all the vendors.
Yes! Bootloaders(IPL/SPL)/Radio Roms can be flashed separately or within by a Rom flash.
Downgrading to IPL/SPL 1.xx is only needed if you want to CID unlock the phone for upgrading to any wm6 or wm6.1 rom,as no official wm6 rom is provided by any vendor.So its only possible to upgrade to wm6 or 6.1 latest rom through custom build roms and for that its required to get the phone CID unlocked
After getting the phone CID unlocked,its prefered to upgrade to T-mobile 2.26 coz its a proven stable base rom,but you can also upgrade to IPL/SPL 2.xx,required for upgrading to wm6 by flashing any other official Aku (Adaptation Kit Update) 2.xx rom.
Upgrading to IPL/SPL 3.08 will just give you a slightly better boot up timings,which is hardly noticeable and nothing else,so if you are at 2.xx,its more preferred.IPL/SPL 3.08 sometimes creates problems afterwards if you have to downgrade.
Its also not necessary to reflash back to official ro each time before flashing a new rom,but only recommended,to clear the Extended_Rom corruption and have a clean base,I have never reflashed any official rom before flashing any new rom,but then thats me!
Thanks men!!!
Im getting worried but... why does the Bootloader Shows the four zeros... on my device it never shows the zeros.
In 2.17.0000
I think he use the WST isnt it? not seing the bootloaders...
I have finally installed T-Mobile 3.08. It has interesting features, but I don't like the dialing pad and that when I start Internet Explorer, the phone asks if I want to connect to T-Mobile GPRS. I'm 60% with the Qtek 2.27 and 40% with T-Mobile 3.08. I'll wait to see the battery life compared with Qtek ROM and the power consumption when using wireless. I'll make a decision in weekend.
Oh, forgot to ask about WM6. Will the phone be faster or slower? What are the main differences from WM5? Is there an official WM6 ROM?
Thank you very much!
It seems that qtek's wi-fi is connecting continously, without establishing a connection. It show "connecting" all the time.
Today I have installed Qtek 2.17 ROM. I like it more than T-Mobile 3.08.