extrom unlock - 8525, TyTN, MDA Vario II, JasJam General

i'm not sure is here the place to post this thread.
yesterday i have flashed my HTC to new rom 1.35.255.2. before that i have unlocked my extrom and worked flawlessly. but now with the new rom i can only unhide the rom, i can't unlock it. i tryed all known registry hacks and locks and no result.
can anybody with 1.35.255.2 rom on htc help me to unlock it.
10x!
p.s. sry for the english

You need to make your device SuperCID first, then you can unlock the ExtROM. Read here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unhide_Extrom
http://forum.xda-developers.com/showthread.php?t=283750

wow i have to downgrade to bootloader 1.04 i think is too long procedure and risky for 10mb. i'll wait and buy 2gb microsd card...
thanks anyway!

Related

what does it mean to CID unlock?

I just got my 8125, and i upgraded to the aku 2.2 rom and then i couldnt run any new programs for some reason, so i downgraded, and ran the lokiwiz/unlock tool, and then upgraded to the aku 2.2 rom again. and now im waiting for it to finish setting up. is that the correct way to usually do these upgrades? thanks for the help!
CID unlock is what allows you to install unsigned apps, as well as downgrade your ROM and use other vendor's ROMs.
thanks!
CID Unlock
Can you please tell me where you found / downloaded the CID unlock software?
Thank you.
Re: CID Unlock
jerebo said:
Can you please tell me where you found / downloaded the CID unlock software?
Thank you.
Click to expand...
Click to collapse
I recommend using lokiwiz 0.2b for CID unlocking. It's in the first post of this thread. However in order to use it, you must be using an AKU 1.x ROM. If you have already upgraded to AKU 2 then use the instructions here. However, if you have upgraded to an AKU 2.2 or greater ROM then there is currently no known way to CID unlock your phone. I hope this helps you a bit ^_^
I'm currently on Summiter's custom ROM 2.17.7.2 and assumed upgrading to this ROM confirmed that my device was CID unlocked.. I guess this is not the case, but will I be able to follow the instructions in the post above without issues because I am still below 2.2?
do you guys know what rom/aku/cid/whatever the cingular 8125 comes with? i'm going to buy one off ebay and am worried it'll be the latest craziest thing that loki wont be able to unlock. although i've read a lot of "it worked on my 8125" posts.
CIDunlock or Unlock or Both?
Hi People,
I've used the lokiwiz to unlock my phone. But the most important question is what is the difference between the options.
I first used the C to superCID my phone. Guess that worked.
After that also did a Unlock worked fine as well.
But what is the difference between Unlock and CID unlock?
is unlock for the SIMlock and cid unlock for other rom upgrades?
Is the CID unlock sufficient to CID unlock and Simunlock my Vario?
Menu looks like this:
--------------------
U. Unlock
L. Lock
C. CID Unlock (SuperCID)
Q. Quit
--------------------
Type the letter and press Enter: U
Thanks in advance.

Problems faced before I flash the rom..please help me

Hello..i am a newbie in flashing the rom. I have read many posts regarding on how to flash the rom. My questions are :
1. Do I need to use the unlocking CID program before I flash the rom or should I just flash it using the NoVendor rom?
2. If I don't use the unlocking CID, will I able to reflash the rom again back to other versions or downgrade to the one I am having now?
Currently the rom I have now is is German language in which I cannot understand at all. I wanna switch to English version. Your help are greatly appreciate.
Thanx
no one can help me???pleasssseeeeeeee
Instead of waiting and bumping your own post .. why don't you do a search?
http://forum.xda-developers.com/viewtopic.php?t=49913&highlight=
In general, you need to CID unlock your device before any flashing. You need to unlock it after every hard reset too.
No harm CID unlocking your phone anyway. However, it may harm you if you don't CID unlock it.
but I still don't understand what's the different between CID unlock and NoVendor rom..from what i read from this forum, CID unlock is important cause it enable users to change/upgrade the rom. but there aren't any information that said what does the NoVendor rom does (or maybe I didn't see it).
so if the NoVendor rom is similar to the CID unlock, then i guess i dun need to use the CID unlock?or should i still use it?
Briefly, if you just want to upgrade your ROM to other vender's newer ROM, you could use that Machinegod's NoVendor ID upgrade utility. If you are happy with that new ROM, then you don't have to unlock your device's CID.
However, if you need to downgrade your device to other vender's older ROM, then you will have to unlock its CID first. Otherwise, the utility will tell that it can upgrade only. The major benefit from unlocking CID is you can up/downgrade your device to any vender's ROM.
Problem is that there is no reliable utility to unlock the CID for device with AKU2 ROM yet except that from Thailand website. Read more details here: http://forum.xda-developers.com/viewtopic.php?t=52244
Hope this helps.
This utilities won't work with the last dopod rom SPL 2.15.
This rom is great but if you choose to upgrade to it, you won't be able to change until another downgrade tool is released.
gee..thanx a lot....i will try to upgrade it now.really thanx a lot...

Is it possible to cid-unlock an MDA with IPL/SPL 2.26?

Hi,
I have a new MDA from T-Mobile which I updated to the 2.26 official t-mobile upgrade. I would to back up the device to a mini-sd card from the bootloader; however, am not able to cid-unlock the device (aWizard fails during the write step), and the bootloader is giving me a security level violation error.
Is there a (safe) way to CID-Unlock the device? If not, how else can I do a full backup and guaranteed restore from a mini SD card? I apologize if this has been answered before... I tried to read through the forum however, could not find anything definitive.
Thanks
cid unlocking t-mobile mda
Hi,
I'm from the Netherlands and have exact the same problem.
Can't cid unlock my t-mobile mda.
So if there is an solution i'm interested.
This is the only solution yet: http://www.imei-check.co.uk/m3000unlock.php
Read the following link:
http://forum.xda-developers.com/viewtopic.php?t=50768&postdays=0&postorder=asc&start=175
Lokiwiz Issues:
Winnie:
Thanks for your response. I tried Lokiwiz. With Lokiwiz 0.3a (LokiwizMsl.bat) and that provided the SIM unlock code. However, I could not figure out a way to CID unlock with the Lokiwiz 0.3a tool. Lokiwiz 0.2b fails to CID unlock the phone. Again, I apologize if I am missing the obvious, however, what am I doing wrong?
Thanks
You're not doing anything wrong. The latest lokiwiz does not include the CID unlock feature, and the last version that does will not unlock 2.25 and above. It may not work on earlier ones either, but I know I have 2.25 and it's not working.
Re: Lokiwiz Issues:
Opppsss....I guess the poster on the link I gave you meant to be SIM Unlock not CID Unlock. I appologize. I just re-read the link and realized that. I'm sorry.
I think the only solution is to CID unlock before you upgrade to ROM 2.26. I read from some other threads as well that this upgrade does not require you to redo the CID unlock. Could anyone confirm me on this?
Thanks
acerbix said:
Winnie:
Thanks for your response. I tried Lokiwiz. With Lokiwiz 0.3a (LokiwizMsl.bat) and that provided the SIM unlock code. However, I could not figure out a way to CID unlock with the Lokiwiz 0.3a tool. Lokiwiz 0.2b fails to CID unlock the phone. Again, I apologize if I am missing the obvious, however, what am I doing wrong?
Thanks
Click to expand...
Click to collapse
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Hi,
Thanks for your responses: Is there a way to downgrade to an official 1.08 ROM, and then CID unlock the device, and then bump back up to a 2.26 ROM?
Thanks
i was thinkin of doin that. when i bought my mda it came with the 1.8 rom, and i upgraded it to 2.26. now i be wantin to cid unlock it.
so i was thinkin of tryin to install the 1.8 rom and cid unlock it. but the question is will the 1.8 rom install properly after 2.26 is installed
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
Starcruiser1229 said:
I can confirm that the CID unlock is (so far...) completely permanent once done... I think, however, that you have to unlock with a 1.xx rom, not ANY 2.xx rom. In other words, I do not think that it is just 2.25 and up or just 2.26 that you can't unlock I think it is any rom that starts with a 2. If someone could confirm, it would be appreciated... I do believe that there is some sort of temporary workaround to flash a new rom without CID unlock, but I am not sure how (I am unlocked), or even where I saw that... :roll:
Click to expand...
Click to collapse
Ah ha, so there is a risk of say putting in Tmobile's oem 2.26 rom (or future oem roms) to re SIM and CID lock then.
I myself have an 8125 with ipl/1.08 : 1.08, gsm : 01.16.11, os : 1.8.11.1 and was thinking of upgrading to Tmo's 2.26.
kyphur said:
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Click to expand...
Click to collapse
ah well, that sounds like a massive pain in the ass... i dont have the patience for that anyways i already bought a card specifically to back up the rom in any case, and i dont doubt that the wizard community will come up with something. in the meantime, ive got no major hangups with 2.26, besides the occasional freeze
kyphur said:
Before you attempt to downgrade from a 2.x to 1.x Rom you need to be aware of a few things.
1. If you have a G4 flash chip YOU CANNOT DOWNGRADE TO A 1.x ROM. (Search for G4, to determine this)
2. You will need to use the modified RUU package from a custom Rom which is hacked to always think your phone as Rom version 1.2 installed (again a little searching will explain better)
3. If you try this, your IPL & SPL (bootloaders) will get out of sync (one will remain 2.x). This is a dangerous situation for your phone and you just might brick it!
4. If you read up on how to "cook your own Rom" (yep search for it) you can create Roms without bootloaders which don't need your phone to be CID unlocked.
Click to expand...
Click to collapse
ah well, that sounds like a massive pain in the ass... i dont have the patience for that anyways i already bought a card specifically to back up the rom in any case, and i dont doubt that the wizard community will come up with something. in the meantime, ive got no major hangups with 2.26, besides the occasional freeze

wiza200 cid unlocking

hi all, this is my first post, i hope that i will get some help
i'm going to update my wiza200, so i read this thread http://forum.xda-developers.com/showthread.php?t=298613&highlight=wiza200+rom
but i stops on cid unlock, i don't know if my phone is cid unlocked or not, how can i know?
br
bono.bel said:
hi all, this is my first post, i hope that i will get some help
i'm going to update my wiza200, so i read this thread http://forum.xda-developers.com/showthread.php?t=298613&highlight=wiza200+rom
but i stops on cid unlock, i don't know if my phone is cid unlocked or not, how can i know?
br
Click to expand...
Click to collapse
Grrrr... Just read step 3.5 in the post that you referred to. If you have already tried lokiwiz.bat, just read the instructions very carefully.
It is difficult to get any help with the level of information you provide.
kernelguy
kernelguy said:
Grrrr... Just read step 3.5 in the post that you referred to. If you have already tried lokiwiz.bat, just read the instructions very carefully.
It is difficult to get any help with the level of information you provide.
kernelguy
Click to expand...
Click to collapse
thanks for replay,
i have red it, but i didn't understand yet, my phone is G3 and sim unlocked, but i don't know if it's cid unlocked or not! can u explain me how plz?
br
plz i'm newbe to this kind of phones, i know that search can help but sometimes without a teatcher it will be dificult and risky, so...
i wanna put french language inside, what should i do and what files should i use!
this is my phone:
it's sim unlocked but i don't know is cid is
ROM version : 1.6.2.2 NLD
ROM Datum : 11/1/05
Radioversion : 01.12.10
Protocolversion : 4.0.13.23
ExtROM : 1.6.2.103
IPL 1.06
SPL 1.06
GSM 01.12.10
OS 1.6.2.2
BR
Your IPL/SPL look ok for you to be able to CID unlock. Did you run lokiwiz to CID unlock it? If you did and you want to find out if it worked downlolad Wizard Service Tools and click on the CID actions button and it will tell you if it's CID unlocked or not.
xeno1 said:
Your IPL/SPL look ok for you to be able to CID unlock. Did you run lokiwiz to CID unlock it? If you did and you want to find out if it worked downlolad Wizard Service Tools and click on the CID actions button and it will tell you if it's CID unlocked or not.
Click to expand...
Click to collapse
where i can find lokiwiz and wizard service and what are they used for
i have download this file
ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe
can it be helfull for me to put french lang in my phone
plz i know that i ask so, but it's my onely way, too many threads for this phones, i can't understand, so plz replay.
br
I think you need to start by reading this - http://forum.xda-developers.com/showthread.php?t=285435. You need to know what you're doing or you will ruin your phone. The ROM you mentioned is an english ROM so, no it won't help you put french on your phone.
After you have read the above link that I posted and then read it a few more times so that you fully understand what you're doing, you can find lokiwiz here - http://forum.xda-developers.com/showthread.php?t=249474
and Wizard Service tool here - http://forum.xda-developers.com/showthread.php?t=295038.
well! thank u verry much, it was a good begin for me
i sucseed to unlock cid and i have update my rom with ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe
now my phone is better with english language, i think now i nead onely a french rom to complete my work
IPL 2.26
SPL 2.26
GSM 02.25.11
OS 2.26.10.2
can u give me a link for a good one?
can anyone give me a good link plz
br

Unlock HTC Blackstone

Hello anybody unlock blackstone?
only pay is possible?
Thank you i need information is is possible unlock and how unlock.
actually you can, i unlocked mine and flashed it to wwe and it takes any sim now, i first used olipros software (HSPL) then flashed to generic 1.56 then down graded and its totally unlocked
Touch HD Unlcok
Hi
Can you provide more information, the steps and the files you used. Would appreciate if you can put the files on RapidShare and provide a link.
Regards
RajSE
ruffnexx_uk said:
actually you can, i unlocked mine and flashed it to wwe and it takes any sim now, i first used olipros software (HSPL) then flashed to generic 1.56 then down graded and its totally unlocked
Click to expand...
Click to collapse
normal rom update or downgrade will do nothing with simlock....
r u kidding?
any news from olipro
How could we know if olipro is still working on unlocking blackstone devices ?
ah in reply to that question. we made it with Olipro... see http://forum.xda-developers.com/showthread.php?t=521206
To sim unlock your device or to security unlock (not the same thing) you will need to use Olipro's unlock tool which can be found here.
HSPL or USPL do not unlock your device. HSPL & USPL allows you to bypass the HTC certificate check and flash unsigned or CID-mismatching roms to your phone.
HSPL is permanent while USPL is a temporary solution.
Ta
Rick
p.s. thread closed

Categories

Resources