Related
Just installed the xda-developrs SE ROM
Seems to make the XDA run like a deamon, well impressed so far.
Just as everybody else though. The autoconfiguration doesn't work. So can't get the o2 wap settings up.
dns 193.113.200.200
and 193.113.200.201
np mobile.o2.co.uk
but something seems to be missing. Could somebody please supply the complete settings.
WAP...
Ehm, as far as WAP goes...
We did not include the EZWAP program in our install. So WAP is unlikely to work. WAP wasn't in Othman's Qtek ROM (it has no autoconfig settings and no WAP), and we didn't create mkrom to take input from multiple ROMs. We figured serious users would want to the new EZWAP which also does MMS (which isn't included by O2), and we never really used WAP or MMS ourselves. So I guess we never tested any WAP settings...
If you want you can have a look at the registry settings we insert for each provider in the 'provider' directory of the mkrom kit. If you think some settings are missing, you could do a registry dump (using the 'System Snapshot' we put in the ROM) before and after fixing the problem, and send us the differences. We can them insert them in next versions of the Special Edition ROM.
02 internet settings
Is this what you want?
Name: 02 Mobile Web
Select a Modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Access point name:
MOBILE.02.CO.UK
Name 02 MOBILE WEB GSM
Select a modem: Cellular line
Baud rate: 19200
Advanced:
Connection perferences:
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use specific server address
DNS: 192.113.200.200
ALt. DNS: 192.113.200.201
WNS: 0.0.0.0
ALt. WNS: 0.0.0.0
Country code: 44
Area number: 771
Phone number: 2932932
Name : 02 WAP GPRS
Select a modem: Cellular Line (GPRS)
Baud rate: 19200
Advanced:
TCP/IP:
Use Server- Assinged IP Address
Name Servers:
Use server-assigned address
Access point: wap.02.co.uk
name: 02 WAP GSM (CSD)
Select a modem: Cellular Lime
Baud rate: 19200
Port Settings:
Data bits: 8
Parity: NONE
Stop bits: 1
Flow Control: Hardware
TCP/IP:
Use server-assigned IP Address
X Use software compression
X Use IP header Compression
Name servers:
Use server-assinged addresses
Country code: 44
Area number: 771
Phone number: 2927927
There ones I use my self
UK 02 XDA
Hi,
Thanks for the above info. It worked a treat. However I was asked for a Username, Password and Domain login when I connected to GPRS. So for those of you who do know it, here we go:
Username: web
Password: password
Domain: leave this blank.
Check the box to save the password.
Gil.
thanks, i will add it to my txt file
missed those
I am on O2 payg, using the xda, I have tried the gprs settings and it says the number isnt responding, when I use the gsm settings that are preset when doing auto config, I get charged even though I am on 300 free wap minutes, I dont think I am a stupid person but I have a feeling of having been here before when I previously had an O2 payg, any help would be appreciated. I am getting the free sms messages so I know the account is activated for the freebies. The "G" sysmbol comes on when i switch on the xda and stays there for about 10 seconds.
Hi. I'm new here so excuse me if I seem simple! I have unlocked my XDA using xdaunlock and now have same problem with GPRS dropping out after approx 10 seconds. It worked before, so has unlocking changed any settings? or has something else happened. The xda has the latest uk rom upgrade with 4.21 radio. Any help please as I dont know what to do! Thanks.
Please has anybody actually got a working setup for GPRS on O2 PAYG on the XDA, I have spent weeks on this and got nowhere. I have followed instructions to the letter from different websites and still no joy, I can connect to wap over gsm but gprs settings still elude me, anybody got a full description of settings please, and how to enter them. Thanks in advance.
Is there nobody on this forum using O2 PAYG sim and using wap over gprs? I cannot seem to find anybody with the settings, I wonder why, it seems like the holy grail just to get on line using the system that is available to me in theory? Help would be greatly appreciated.
Nobody in UK on O2 pay as you go :?: :?: :?:
Update on my problems with GPRS on O2 payg. I have tried every setting on this forum plus others, I always get error, not answering or some such, I have decided to stick to gsm connection using shortcode 951000 and exwap 2.5. if anybody can give me step by step, confirmed working settings, I would apprectiate it. This will be my last post on the subject, I am beginning to take up too much storage on the forum server with this. A resolution to the problem would be great as I can then save my connection settings to flash ram and not worry about it again.
cruisin-thru I am not on O2 so can offer limited help.
EzWAP2.5 could be yr problem.
I sometime find difficulty using WAP after a session mms'ing with EzWAP2.5 . A solf reset is then required before I can connect to WAP via gprs.
Here is my sugestion:
1.uninstall EzWAP2.5 completely
2.try to get connected to gprs or gsm WAP
3.try PIE, it works for WAP , but depending on yr
telco whether on gprs or gsm
4.if all the above is working then install EzWAP2.1
and see if it works
5.then EzWAP2.5 and see if it screw up everthing,
if not try mms.
Hope this helps, i am working blind here
OK, searched high and low and think this is the best thread to post this in.
Have just upgraded my XDA with the developers rom v1.2. Everything great for a while (3 days) Now it can not connect to gprs or gsm. I get the "There is no answer at the number dialed.
I am with O2 UK and have treble checked the settings and tried various alternatives however nothing works.
One thing I have noticed is that the autoconfig dropdown box says Austria One.....when I change that to O2 - UK and click OK to autoconfigure, it doesn't, it just comes back to Austria - One.
Phone works and SMS is fine, just GPRS/GSM
Do I need to re-flash or contact my provider....or please tell me there's a simple "fix" :lol:
Thanks
Ive got this reply through email from o2 im waiting now for password and username I will post soon as I get it
Go to Start > Settings > Connections > Connections, and then select the top modify option. Within this, there should be four connection types.... Select the GPRS WAP connection and modify the settings. You need to change anything that says o2wap to payandgo, and change the APN from WAP.o2.CO.UK to PAYANDGO.O2.CO.UK. Once you have amended these settings, tap and hold on this connection type and make it your default. You might want to rename this
Then, go into the EZwap application, and select tools and then options, and there should be a series of tabs. Select the general tab and make sure the connection in the drop down list, is the one you have just amended.
Click to expand...
Click to collapse
im on o2 online genie payg 300 free wap/txts per month.
i got my txts down to 200 and i get 25free mms per month instead
i got all wap/net working for free
just follow these bits of info it all works as i have it on my xda running wm2003 no need to config dsn and ip things in the advanced bit leave them how they are:
settings are:
MMS
Data bearer: GPRS
Access point name: wap.o2.co.uk
Username: o2wap
Password: password
Authentication: Normal Gateway IP address: 193.113.200.195
URL address: http://mmsc.mms.o2.co.uk:8002
Session mode: Permanent
GPRS
O2 Wap / Mobile Internet settings:
Homepage: http://wap.O2.co.uk/
Dialup access number: +44 771 2927927 (915000 dont work for xda)
APN (GPRS only): payandgo.o2.co.uk
Gateway (IP) address: 193.113.200.195
Username: O2wap
Password: password
Session type: Continuous / permanent
Port number: 9201
Note: Until May 2002, O2 Wap was known as Genie Wap (username 'geniewap').
The alternative dialup number of +44 7712 927 927 is also available,
although this number may not be free when used with O2 online
Hi, make sure first that it's your GPRS WAP connection that Ezwap is using, and set it to 'auto connect' in 'Options'
under the 'connection' tab set connection type to 'gateway' and put in your networks WAP IP address (o2 IRL's is 192.168.090.074). Click on 'connectionless gateway'
Untick 'wtls' secured connection.
Click on the 'MMS' settings tab next.
Put in your networks MMS 'Message Server' or MMS homepage. (O2 IRL's is http://mmsc.mms.o2.ie:8002)
All the other settings can be setup as you like.
1) Enable MMS on my account. Had to get 'pally' with a tech guy to do this as XDA is not supported; I suppose pretending I had a 7650 would have worked too.
2) Install EZWAP2.5
3) EZWAP Settings for O2UK:
General
"Connection"
- O2 WAP GPRS
- Connect automatically Y
- Rest on this tab default
Connection
"Connection Type"
- Gateway
- Address 193.113.200.195
- Port 9201
- Connectionless Gateway N
- WTLS secured connection N
- Rest on this tab default
Push
"Push"
- Enable push Y
- Connection type Address: blank
- Port 2901
- Connectionless Push gateway Y
- WTLS secured N
History/Cache & Identification - default
MMS
"MMS Settings"
-Message Server: http://mmsc.mms.o2.co.uk:8002
-Sender Address Type: Phone Number
-Sender Address: My phone number
MMS Options - delivery recepit and read receipt Y
It's not 100% reliable, which I knew would be the case, but it's not too bad. Get now when the message arrives doesn't work, but I just open the MMS inbox and click the message to get it.
ntl
username: Normal
incomming: pop.ntlworld.com
outgoing: smtp.o2.co.uk
02
username: [email protected]
incomming: mail.o2.co.uk
outgoing: smtp.o2.co.uk
Hotmail
username: [email protected]
incomming: http://services.msn.com/svcs/hotmail/httpmail.asp
outgoing: http://services.msn.com/svcs/hotmail/httpmail.asp
Hi,
I have a question, it seems not a lot of people is using cingular with this phone. But I'm trying to setup EZWAP to use MMS with my phone. Does anything know the settings for it? Like push, server, etc... I do have GPRS working and the phone connects to the internet no problem. The setting I have now is:
no push (what does push mean?)
msg server: http://mmsc.cingular.com
sender address type: phone number
sender address: my phone#
When I try to send it connects to my GPRS and after awhile says send failed. Any clues? THanks a lot.
Sorry if this has been answered before (but I can't find a solution).
I have loaded latest o2 rom in corporate mode and entered the MMS config but all I get is :
"Unable to send your message(s). Your message(s) will remain in the Outbox."
The settings I have are:
For MMS settings
server O2UK
193.113.200.195
port 9201
server address: http://mmsc.mms.o2.co.uk:8002
I have a wireless connection at home and am not sure what MMS should connect through (connect via choice in settings).
Anyone have an idea or had the same problem?
Steve
i have had the same problem. never figured out how to get it to send, despite trying lots of things in connection settings, so gave up in the end.
would be interested to hear the answer tho! )
Use your gprs operator settings.. You cannot have any other connection...
hey here are the O2 settings that work for me to enable sending of MMS Messages
in MMS Configuration under servers i have
Server Name O2UK
Gateway 193.113.200.195
Port number 9201
Server address http://mmsc.mms.o2.co.uk:8002
Connect via My Work Network
Then in settings under the connections tab click on Connections
Add a new modem connection under My Work Network
This should be called something like o2 Active connecting using Cellular Line (GPRS, 3G)
Access point wap.o2.co.uk
username o2web
password password
leave everything else as default.
This should let you send MMS Messages, it works for me!
Thanks mjames_84 those settings are working now.
Hope it helps others too.
Steve
ncruz said:
You cannot have any other connection...
Click to expand...
Click to collapse
ah... this might be the problem - i do
i already have a connection setup in both "My Connections" and "My Work Connections"
is there no way around this?
tried deleting the other connection in "My Work Connections" and yup - MMS sends fine now. not sure what i'll do when i need that connection again, but for the moment - yay, MMS fun
One thing I have noticed ....
Even with the settings above - I cannot get MMS to send with "WAP 2.0" selected (default setting) under MMS configuration
As soon as I select WAP 1.2 they send straight away
Anyone else noticed this ?
Hmm I'm not 100% sure on this, but I think if you want to use WAP2.0 you have to specify a different port. I seem to remember that when using personal mode instead of corporate it was set up to use WAP2.0 and the port was different to the settings I had previously written down from my old XDAII....I still used the settings from my XDAII cause I know that they worked.
Can anyone (mad enough) running the full personal installation with o2 Active find out what port is used my default when using WAP2.0 for sending MMS Messages?
Port number for WAP 2.0 is 8080
Thanks Lord Buckingham
Does anyone know what the difference is between WAP 1.2 and 2.0? Is 2.0 faster? better? more secure?
Lord Buckingham said:
Port number for WAP 2.0 is 8080
Click to expand...
Click to collapse
But even with port 8080 selected I still can't send MMS with wap 2.0 selected - yet with 1.2 I can send them via port 9201 or 8080 ! the port number was the first thing I changed when I had problems , from the default 8080 to 9201 (which seemed to be the obvious choice ) so it seems that wap 2.0 just doesn't work for me
very strange ! I'd be interested to know if anyone is using 2.0 successfully (just out of curiousity)
I sent one near the start, but had to reduce the pic size below 100K or something, if I recall....
Anyone confirm what the limits are on O2?
I still cannot get it to send using any of the above settings or the original ones that o2 active install. If I use the o2 3g contract sim that came with it then it sends with NO PROBLEM whatsoever, BUT I don't use my contract sim ever, I use a o2 online sim which I have used for years.
Any ideas?
Is the settings different for PAYG and for CONTRACT ?
If so then I need the settings for PAYG please guys, can you help?
if you are using an old "on line" SIM I suspect that it might be one of the old Genie internet SIMs, so the settings may be different. Try setting the device up as pay and go, so change the APN to "payandgo.o2.co.uk" , username "payandgo", password "password", all the other settings should be the same. If this fails, climb into a large bottle of red wine, sometimes its the only way :wink:
Hey, i couldnt get it to download a message and the fix above worked.
Im assuming that as it connected to the 3g network that it charged me for d/ling the message yeah?
can it to be set to do it when its synced with the computer or in a wifi area?
Cheers
JAmes
Got mine working with WAP 2.0 !!
The settings I have are:
Server: O2UK
193.113.200.195
Port 8080
Server address: http://mmsc.mms.o2.co.uk:8002
Connect via: The WAP Network
Hi there.
I've got a QTek S110 (as title) on O2 UK, and I'm trying to set up MMS messaging. I've spent quite a bit of time searching these forums and google, and although I've had a little success, it's still not working properly. The situation is this:
I can successfully configure the device to send MMS messages, and this works fine. The problem I currently have is with the receipt. If I'm connected to the O2 Wap GPRS connection I have set up for MMS, which sends the messages, then I usually can receive messages I send to myself from another phone. However, if this connection is not active, then the messages just get lost. I'm not notified at all that a message was incoming, and even if I manually connect the device, the message is not received. I never have any knowledge of its passing.
Can anyone help me with this? I'm beginning to go mad, I think...
Have you tried the original O2 MMS cab file from the ext-rom? You can find them on the ftp.
M
oltp said:
Have you tried the original O2 MMS cab file from the ext-rom? You can find them on the ftp.
M
Click to expand...
Click to collapse
I hard-reset my device last night when trying to get it to work, and it didn't configure, so I guess the CAB isn't built into my rom. Could you give me a bit more guidance on the FTP server, I'll take a look myself, but not really sure what I'm looking for.
Thanks for the response.
I got kids, so I say: chips there's no UK O2 ext-rom uploaded on the ftp.
But I found you this:
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
@ this site: http://www.filesaveas.com/mms.html
Hope it helps,
M
URL address: http://mmsc.mms.o2.co.uk:8002
oltp said:
I got kids, so I say: chips there's no UK O2 ext-rom uploaded on the ftp.
But I found you this:
Access point name: wap.o2.co.uk (contract customers) or payandgo.o2.co.uk (pay-as-you-go customers)
Username: o2wap (contract customers) or payandgo (pay-as-you-go customers)
Password: password
Authentication: Normal
Data bearer: GPRS
Gateway IP (proxy) address: 193.113.200.195
Session mode: Permanent
@ this site: http://www.filesaveas.com/mms.html
Hope it helps,
M
URL address: http://mmsc.mms.o2.co.uk:8002
Click to expand...
Click to collapse
These are the settings I believe I'm using...
In connections, I have:
Advanced->Select Networks
Internet: O2 MMS Test
Private Network: O2 MMS Test
In tasks, I have
'O2 MMS Test' Is my connection
Manage existing connections->Modem tab->'O2 GPRS WAP'->Edit
-- Modem: Cellular Line (GPRS)
-- Access Point: wap.o2.co.uk
-- user: o2wap
-- password: password
-- advanced:
-- -- tcp/ip:
-- -- -- Use server-assigned: checked
-- -- -- Use software compression: unchecked
-- -- -- Use IP Header compression: unchecked
-- -- servers
-- -- -- DNS: 193.113.200.195
I have also, under the proxy tab, got
This network connects to the internet: checked
Uses a proxy server: checked
Advanced->
-- HTTP: 193.113.200.195 port 8080
I set this proxy as it allows me to access the internet through this connection; it doesn't seem to affect the MMS operation.
In MMS settings, I have:
Prefs:
Connect via: O2 MMS Test (the connection I set up)
Retrieve message immediately: checked
Ok to download when roaming: checked
Save sent messages: checked
Attempts before giving up: 5
Photo Res: 640x480
Servers:
Gateway: 193.113.200.195
Port: 9201
Server address: http://mmsc.mms.o2.co.uk:8002
Sending Size Limitation: 100K
--Gavin
Rereading your first post & adding up your last comments, I'm beginning to think to network screws up in this case. Either it doesn't register you as being offline, or it can't store & forward the MMS for you.
Maybe O2 themselve can help you in this, I don't think your device is incorrect configured.
M
I had similar issues with my S100 on Orange. I could send MMS to anyone but the only MMS I could received were if I sent them to myself. I think I've finally cured the problem with the latest T-Mobile MMS client.
6thElement said:
I had similar issues with my S100 on Orange. I could send MMS to anyone but the only MMS I could received were if I sent them to myself. I think I've finally cured the problem with the latest T-Mobile MMS client.
Click to expand...
Click to collapse
So you're using different software for the MMS? Could you direct me to where I could download this/how to set it up.
Thanks
--Gavin
On the FTP
Copy the downloaded CAB file to your S110 and run it to install. MKae sure your messaging app is closed first though! If your wallpaper messes up once you've installed it just reset your wallpaper again.
6thElement said:
On the FTP
Copy the downloaded CAB file to your S110 and run it to install. MKae sure your messaging app is closed first though! If your wallpaper messes up once you've installed it just reset your wallpaper again.
Click to expand...
Click to collapse
Woohoo!
That works, thankyou very much .
My invoice is in the post
Since an hard reset i also have probs with qtek s100 and mms. Does the application which is downloadable a few posts ago compatible to austrian phones too ?
djtwok said:
Since an hard reset i also have probs with qtek s100 and mms. Does the application which is downloadable a few posts ago compatible to austrian phones too ?
Click to expand...
Click to collapse
The application is the same as the one packaged with the phone, just a newer version; so yes is the answer, it should work with austrian phones.
After logging on the ftp it tells me "file not found" ? btw: the app was made for s110 and mine is an s100 does that matter ?
djtwok said:
After logging on the ftp it tells me "file not found" ? btw: the app was made for s110 and mine is an s100 does that matter ?
Click to expand...
Click to collapse
That link still works for me, and it should be fine on an s100; there's not much difference between the two.
Hey
i can not receive mms messages i get them thro but i can not download the content, i click download an it says in a warning box " unable to receive you message, your message notifacation will remain in the inbox.
How do i set it up manualy?
Xda mini s with o2
cheers
Chris
I also need help for setting up my 8125(wizard) for T-mobile mms...
Thanks in advance
Anything???
I just recently setup the MMS on my Xda Exec. I live in Toronto and am using Fido so just looked up their settings on the internet and had everything working after alot of trial and error. Here are a few websites that I used, maybe it can help you out. There is one page that has information from carriers all around the world.
http://www.expansys.es/forumthread.asp?code=I-MATE_SP3I_US&thread=9
http://www.voq.com/site/downloads/GPRSSettings.htm#Canada
http://www.expansys.jp/forumthread.asp?code=I-MATE_III&thread=42
http://www.dslreports.com/faq/7418
http://www.canadiancontent.net/forums/about5138.html
http://www.howardforums.com/archive/topic/452397-1.html
http://www.unlocks.co.uk/gprs_settings.php#canada
http://www.taniwha.org.uk/gprs.html
http://discuss.treocentral.com/showthread.php?t=82095
chris267 said:
Hey
i can not receive mms messages i get them thro but i can not download the content, i click download an it says in a warning box " unable to receive you message, your message notifacation will remain in the inbox.
How do i set it up manualy?
Xda mini s with o2
cheers
Chris
Click to expand...
Click to collapse
See my post near the end of this thread http://forum.xda-developers.com/viewtopic.php?t=61529&highlight=
Settings for FIDO?
neptune said:
I just recently setup the MMS on my Xda Exec. I live in Toronto and am using Fido so just looked up their settings on the internet and had everything working after alot of trial and error. Here are a few websites that I used, maybe it can help you out. There is one page that has information from carriers all around the world.
I have been browsing quite a bit to find all appropriate settings for my XDA Exec to work on Fido in Montreal. I also spoke to customer service; they were kind enough to walk me through basic setup and flip a switch on my account to allow MMS and WAP.
Could you compare your parameters with the following?
Settings/Connections/Advances/Manage Existing Connections
Connection Name: My Connection
Access Point Name: wap.fido.ca
user: fido
password: fido
Domain: 205.151.011.011
Settings/Connections/Advanced/Select Networks/
Programs that automatically connect to the internet should connect using: My ISP
Programs that automatically connect to a private network should connect using: My Work Network
Settings/Connections/Advanced/Select Networks/My MMS
Add Modem named Fido MMS with the following attributes
Access Point Name: mms.fido.ca
user: fido
password: fido
Domain: blank
Proxy settings tab: do not check anything
Settings/Network/GPRS Settings
Authentication: CHAP Authentication
GPRS - Setting: Class 10 (3R2T)
Messaging Settings/MMS
Preferences/OK to Download when Roaming : yes (fido uses also Rogers network now)
Messaging Settings/MMS/Servers
Server name : Fido MMS
Gateway : 205.151.11.13
Port number: 8080
server address: http://mms.fido.ca
connect via: my mms
Sending size limitation: 200K
WAP Version : WAP 2.0
I am getting crazy
Please help!!
Click to expand...
Click to collapse