I get it to install just fine but it never gets to the point where it connects to the network and generates a PIN. It is as if it doesn't know how to recognize the internet connection.
I have BB Add-On with T-Mobile and I have to BB Connect software on the phone. How would I get this working?
Same issue here
have a 6925 on Cingular with Blackberry Connect Plan..Wizard on the device does not continue as it can't detect the network
appreciate any assistance
I have a hw6945 and i would like to install and configure Blackberry Connect on my device. is that posible?
Related
I work in IT and often need to conect to customer sites to resolve issues.
Many of our custoemrs allow me to have VPN access in.
This works a dream from XP PRO.
However I thought I would try and access 2 customers via VPN over WIFI from my MDA PRO which I have just upgraded to the latest T-mobile UK ROM.
I created my 2 connections both use PPTP.
I then tried to connect one of them , holding the stylus over the connection I wanted and selecting connect.
Nothing seems to happen.
Rebooted
tried again the same.
Disabled WIFI and tried over the usb connection and activesysnc, nothing.
How do you know when you are connected.
I removed the password info and tried to connect again.
Exepecting to be prompted for password.
nothing appears on the screen.
no error messages, I would expect to see conenction failed, or a disconnect option once you connect.
Am I missing something.???
I dont think your missing a thing, ive tried it before and never got it working through any connection method. bag of pap as they say
VPN only seems to work over t-mobile 3g not wifi
I can conenct via 3g but not wifi
Seems to be a device limitation
Update
I understand from T Mobile UK this is a problem that their UK partners cannot fix so they have passed it onto T Mobile in Germany who will raise it with their suppliers.
There is no promise of a fix or any idea of timescale
This works fine for me:
1.Set up VPN Connection in connection settings for th server you wish to use
2. - most important - in the advanced tab relating to above under Exceptions you need to enter the IP address of the computer you are trying to connect to
3. Go to Terminal services in Programs and enter the IP address of the cf the computer yo wish to connect to - and press Connect
Hopefully that may work for you
johntheo
What am I missing? Where can you obtain the updated rom from? I cannot find it on the T-Mobile site.
Gareth
I can seem to get this to happen, when I setup a bluetooth connect from my laptop to my Jasjar all the laptop see the Jasjar as is a modem and wants me to fill in a number to dial, I want to just make a connect so I can use the Vodafone connect software on the laptop so it can use the 3G connection through the phone, I can use a usb connection as my usb port is broken, so unusable, any one know what I am doing wrong?
So you want to browse thew internet on your laptop, using the universal as a 3g modem?
If so when Vodaphone connect asks for a number use *99# That should make the phone use it's default 3g GPRS connection.
Hi and thanks for the reply but I am still having problems, I even tried and used my Jamin and it seems to do the same thing, create a modem connection and thats it. I have a Vodafone Mobile Connect account and when i try to run the software it can't find the phone through bluetooth because i can pair the phone and the laptop as I think all the laptop wantes to do is connect to the phone if it needs a modem. I don't really understand what is going on here. Has anyone done this before?
Hows this for crap, I just phoned i-mate and they told me you can't use any i-mate phone as a modem over bluetooth connection, you have to use the USB connection to use the phone as a modem. I find that very stupid. :evil:
I have been trying for about 10 days to get my Tilt to connect to my VPN with my AT&T service. One time only while connected to the usb cable was I able to connect VPN and then able to run Remote desktop. As soon as I disconnected the usb cable, the connection died and I have not been able to reconnect. never have I been able to connect wirelessly. Any help would be greatly appreciated.
Thank you.
wireless as with wifi or with their cellphone service?
if their service then if they block the ports required there is nothing you can do
I have been trying with cellular only.
Hi,
Use pcAnywhere to connect wirelessly.
kiwi992.
Please excuse my novice choice of wording....
I meant to say that I am having problems connecting over the internet side of the device as a stand alone connection. I have not tried wifi. My needs are to reset a modem server running a dial up program. If I remote desktop through my vpn I can use my current setup that I have for normal pc remote access.
Thanks.
Andy
Since I am having no luck with VPN......
I have been trying to get PCAnywhere installed but for some reason the install will not even give me the "other destinations" option to install (pcanywhere ver 12). Active Sync is running but the install just doesn't see the device.
Can anyone recommend a good vnc program for use with my Tilt WM6 connecting to my Windows 2003 Server?
Thank you.
No luck with the vpn.... yet.
No luck with PC Anywhere....yet.
The good news..... I have found a pretty decent solution.
Ultra VNC was setup on my server. VNC+ was setup on my Tilt. After the proper router port forwarding...... it's all working like a charm!
Going one step further. Both vnc programs were setup on my work station and can be run simultaniously. I can access my workstation from my Tilt and listen for a another connection on my workstation. A customer can connect to my workstation as normal and I can access the workstation from my Tilt. By doing this I can control my customers desktop through my Tilt/Workstation connection.
An added plus... my workstation can access all websites normally and through the vnc connection, they appear normally on my Tilt (yes in a small way, but they appear just the same.)
A pretty good alternative without paying the service provider for any additional monthly fees.
I am wandering if there is a way to share my internet connetion between my alltel ppc 6800 with the new htc shift. I know how to link the phone with my laptop but I am currently looking at purchasing the shift to replace it and was wandering if the connection would work. If anyone has tried this please post.
P.S. the connection would be via bluetooth unless I converted the mini usb from the ppc 6800 to usb back to usb to plug into the shift. Thanks.
not sure if it could be done with BT, pretty sure it cant be done with USB (unless the shift can operate in host mode)
what should work is wifirouter (im sure the shift has wireless)
ok so how would i get the connection to work through a router? The only internet connection i have is through the ppc 6800.
nono, wifirouter is an app that you would run on your 6800, it essentially turns it into a wireless access point that other wifi enabled devices can use for internet access
where is the app available for download at?
Is that the only way it would work or could I configure the 6800 as a modem to connect?
ok I downloaded the app but still cant connect. I am trying the connection via my laptop and it stops at waiting for Internet connection sharing. is there some setting that needs to be changed or what am i doing wrong?
You ever figure out how to get the internet on your pda using the 6800 and the connection? I would like to do this bluetooth with my setup.
The newest version of WMWiFiRouter ($$$) allows you to do this over wifi, BT, or USB. If you have the money, it's a great program.
I have WMWifiRouter and use it with my laptop. How do i use it with bluetooth to get internet on my Dell X51? The x51 wants to dial a number when you setup a connection.
Hi there, anyone already able to use BB connect on the windows mobile 6 part ?
was able to install but not to connect to the Belgium (Proximus) provider.
Exchange push works perfect but wanted to add the compagnie BB account
Does your SIM card have the blackberry service provisioned?
Regards,
Dave
BB Connect
yes it does. I use te one that was in my blackberry and addet the internet data service to make sure I wont get any surprise bills
how did you install Blackberry connect in your shift, in vista side or WM side?
can you share your BB software with me ? thanks!
Turn off 3G?
here in the US I had to force my handset (Tilt) to use Edge so I could register on the network and receive a PIN for the device