I am not sure how this has happened but my ExtROM has been damaged, is there anychance someone could post a backup O2 UK one please, i don't want to have to go down the shop and get a replacment or wait 10 weeks for a HTC repair
I would greatly appreciate someones help with this and thanks in advance.
Hi if u could tell me how I can save my extrom I will send u it
ive just got the o2 uk xda orbit yesterday...
install total commander, run it and type extended_rom. you will get all files
By ExtROM damaged, do you mean you can't run the programs in the ExtROM (which normally can be fixed by a hard reset) or the ExtROM does not install after a hard reset?
ExtROM does not run after a hard reset, sorry i should of said that, i think i fubar'd the files up
Are you sure you did a hard reset and not just a soft reset?
A hard reset on these things is, Hold down both option buttons on the front, press the reset button in and out with buttons still pressed down, press the send\call button to accept, is that correct? Because that what i have done...
Related
hi
i am no longer able to turn on the backlight after upgrading to 4.00.05 from 4.00.01. I can only see it flashing quickly on a soft reset - so i know it still works. but holding the power button wont do anything. any ideas?
woody
... running a german mda pw10a2 with radio 4.21
I too had this problem when I tried a restore from my backed up 4.00.01 version (I was being lazy and didn't want to reinstall all of my applications). A hard reset and manually reinstalling the applications solved the problem for me.
hey, this is just what i did... wanted to cut corners .
i just did a hard reset and everything is fine now.
thank you so much for the quick response!
Glad to have been of help.
Hello,
I have an O2 Exec, and i just installed PocketPlus and PocketTips and my Exec crashed, so i then hit the reset key and it wont go past the 'blue' start up o2 screen.
Please, please help
Thanks
Please help, i really dont want to do an hard reset
PS. I done an Hard reset and it STILL wont start up ...HELLLLLLLLLLLP
It sounds like you haven't actually done a hard reset? Can you confirm how you tried to hard reset?
Also, are you able to get into bootloader mode?
Cheers
Ant
ROM: 2.06.00WWE
ROMDATE: 6/14/04
RADIO VERSION: 1.18.00
PROTOCOL VERSION: 1337.38
EXTROM VERSION: DIAMOND 1.2SE
The phone keeps resetting itself and re-installing the programs.
It wont keep any of my contacts. and the screen wont stay sideways.
I'm new, maybe if you have any links to post for me to read i will check them out.
if this phone still good? or should i get rid of it?
Just a little jumpstart would be great, plz dont flame me yet
have you tried hard resetting it?
I dont know how, basically i'm a greenhorn in this. The manual is in german so i cant read it.
Actually i put in all my info this morning, and it reset while i had it in my pocket and erased everything, it hasnt reset yet.
I think it was reinstalling everything because i turned the screen sideways on it..
Do i have the current firmware or versions on it?
Do i need an upgrade?
Hi,
Hold down the power button and then, using the stylus, press in the reset button. This will take your XDA back to 'factory defaults'.
Heres a manual for you...
http://www.my-xda.com/downloads/Detailed_XdaII_UserGuide.pdf
Ok, yes i did that. IT seems that it quit resetting thus far.
Sorry, what do you mean by "thus far"?
Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....
Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.
Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks
Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks
Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?
Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.
hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.
Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.
Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.
help O2 exec cannot run only coming up with appearance of bootloder logo of O2
R 1.09.00
G 42.42.P8
D 1.30.107 WWE.
in my experience, id just put the device into bootloader, and then soft reset, to put into bootloader press and hold POWER > LIGHT > SOFT RESET button.
if not then back into bootloader and reflash rom from an official o2 rom from o2 website http://www.my-xda.com/ and see if that works.
have you tried a hard reset?? have you done a WM6.0 upgrade and its not gone the way you planned??
thank you for its guide, I will try
If soft reset do not do the trick, then try a hard reset.
I'm half expecting nuclear to post that "my exec i have soldered legs onto it so it can run quite fast i will post pictures yes"
lol :¬)
I juss had the same problem. Juss do a hard reset.