Hi,
Recently my pda(k-jam) fell from my pocket and it hanged. I did a soft reset but I get this error message "Press Send to restore factory defaults, Other keys to quit"
I tried all keys but in vain. I then did a hard reset by pressing the comm and the voice dial. (did a reset with my stylus). I still get the above error message.
Does anyone have any suggestion or idea how to reset my pda?
Thanks alot.....
Y dnt u flash it with a new Rom look around the forum for the new MOSKI ROM.
Thanks
Thank you for your suggestion, I will think of upgrading to molski.
But will it upgrade ? As a hard reset also doesnt seem to work and how do I get to reach the ROM if I am not able to see the other things?
Thanks
Please help...
Hi ,
I am a newbie and so would seek alot of help. Thanks in advance...
Couple of days back my pda fell and now after soft or hard reset the screen still shows this "press send to restore to factory defaults, other keys to quit"
I would like to upgrade to molski but they say I might have to downgrade my rom but I must first unlock the device. There are g3 or g4 device..how do I know what device my k-jam is...g3 or g4? How do I follow up or know?
Could anybody give me the link or solve my problem? As my k-jam just wont pass that screen..I tried looking into various topics but couldnt go about the first step I should be taking...
Please help!
Thanks
Hi,
Please help..after hard reset, it still does not happen to load into the factory defaults... I cant flash my ROM or anything ...as it wont progress further than that screen ... "Press Send to load factory defaults, or quit"
Anyone have any suggestion?
Hold down the camera button while resetting it. If you can get it to the bootloader (three color screen), you might be able to flash it with something and possibly rescue it. It does, however, sound like you might be screwed. Things break when you drop them, including plastic phones.
hi
Thanks but if I have to do a hard reset, I would already be holding the comm manager and the voice dial with the stylus to reset. Do I hold all the 3 buttons together while hard resetting ?
I have tried all the buttons after doing the hard reset but just doesnt get to the other screen.
Thanks for your help.
Hold down the camera button, Power Button and Pin in the hole. First relese the hole, then release the power button and keep holding the Camera button dis will bring the Tri-colour screen. There'll be some info. like IPL n SPL der
If IPL n SPL are like:
IPL 2.xx.xxxx or 1.xx.xxxx
SPL 2.xx.xxx or 1.xx.xxxx then ur device is G4.
if its like:
IPL 2.xx or 1.xx
SPL 2.xx or 1.xx then ur device is G3
if its G4 you need to CID Unlock that before upgrading it.
All the LUCK. Go Ahead.
Hi
Thanks,
I tried your steps but it still wouldnt work. But somehow I did the switch below the comm button and it showed me the screen to the somethign HTC innovation or like that.
I think I had to tinker with the switch below the button to get the screen working.Thanks for your help.
Related
I just installed this program, used default settings, apllied, My 8125 soft reset.
Now I cannot see anthing past the initial screen that lists IPL and SPL version.
Just a plain white screen, Active sync wont work, no buttons work. Please help !!!!!!!!!!
If you're stuck I think the only next step would be a hard reset which is going to drop it back to the base factory build so you'll lose anything you've installed etc.
How do I hard reset 8125, with buttons only (key / button combination) OS does not boot or visible.
press the "connetions" button (on the left hand side of the unit next to volume up/down) with the "voice" button (right hand side of the unit opposite the connections button) and then use the stylus to do the normal soft reset and it should hard reset back to factory settings - it's described in the manual
Tried hard reset several times, no luck.
All I did was installed registry wizard from here
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
and now I can't get it to do anything, anymore suggestions ?, your help is really appriciated, I have only had the phone to 2 days and its dead already
try holding the same two buttons and then hitting the power button instead of the reset thingy... this method was easier for me... If this dosen't work you will have to enter bootloader mode and reflash the rom.
For the detailed reset procedures try here
By the way, did you use that program to change the default input method?? I use it all the time and the only time it gave me the whitescreen is when I tried to change the default input...Oops. I believe that you should be able to use that program safely, just leave the default input alone... Hope this helps.
Thanks for info, I did manage to reload the ROM. and Yes I did change the default input method, that might have done it. Thanks all, for your Help.
raheelb did you have the warning that the proggie cannot recognize the AKU version?
I had had such a warning, unfortunately bypassed it and had the same issue (white screen) - any one knows why the RegistryWizard cannot recognize AKU version? I have the original Qtek 2.17 ROM installed... :?
i was loading the Touch-IT v2.3 beta for wing rom when i got an error and my phone froze up and would not connect to the pc so i soft reset it and now my tmobile screen freezes on load if anyone could help me it would be great.
I got the bootloader runing but i just wanted to see should i try installing the rom again or reload the original 1
Try to install official Tmo RUU
Try pressing and hold camera and then press into the soft reset hole if its the wing and then try and run the hard spl...if that doesnt work then im clueless....hope i helped...
k thanks i got it now
i ve got the same problem.. how di you fix your??s
Try a hard reset push the soft reset button on the side and hold both of the soft keys keep holding the soft keys until a black screen comes up with white lettering. than press the call button hoped that helped
Sorry quick thread hijack.. im reading here and getting ready to unlock/flash my girlfriend's tmobile wing and was wondering.. if you brick your phone, does a hard reset always return your phone to working, OEM condition? or is it possible that you could permanently damage it beyond hard resetting repair?
Thanks!
you can brick your phone beyond repair, but its actually rather hard to do so. Most people THINK they've bricked their phones, but they actually haven't. Just HardSPL the phone, and it will be virtually unbrickable.
Hard reset essentially reflashes your rom over your current installation. it wont return it to the original rom that came with the phone, but i will reset everything.
thanks! i'll remember that.
Hi,
My 3400 is not starting. When i start the phone it hangs up in the "windows mobile direct push technology" screen. I tried without SD card and SIM but no luck. I have all my contacts inside and I need them. How can I fix the problem of my phone. Please help.
ONBL 1.10.0000
SPL 1.10.0000
GSM 2.79.90
OS 1.10.0.0
-aneesh
aneeshnr said:
Hi,
My 3400 is not starting. When i start the phone it hangs up in the "windows mobile direct push technology" screen. I tried without SD card and SIM but no luck. I have all my contacts inside and I need them. How can I fix the problem of my phone. Please help.
ONBL 1.10.0000
SPL 1.10.0000
GSM 2.79.90
OS 1.10.0.0
-aneesh
Click to expand...
Click to collapse
i don't think u can save ur contacts now
just hard reset ur device but all data will be lost.
How to do the hard reset? please tell me.
no way to save data?
Hi,
I searched google and got the method to hard reset.
-------------
To perform a hard reset (Full Reset) press and hold the left SOFT KEY and the right SOFT KEY, and at the same
time, use the stylus to press the RESET button at the middle left side of your device.
Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
This operation will delete all your personal data, and reset
all settings to manufacturer default. Press Send to restore
manufacturer default, or press other keys to cancel.
Release now the two SOFT KEYs, and then press the TALK (Send) button
---------------------
But when I press the reset button phone restarted but nothing siplayed as mentioned above. Again it went to windows screen and hung there! Cant even do hard reset? What can I do now? Please hlep.
It is ok now. thanks
aneeshnr said:
It is ok now. thanks
Click to expand...
Click to collapse
its nice to hear that ur device is working .
enjoy!!
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
sanmukhsingh said:
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
Click to expand...
Click to collapse
which rom u have updated??????????
hi deepav84,
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button, nothing shown in USB in PC. but result is same...
please help how i can recover my device.....
Hi guys,
I need your help regarding an issue with my HD2.
I have a pre-release unit and I tried installing the SMS update from HTC website, but now it won't get out of the bootloader screen, I've tried to install other official ROM's but with no success. The device has SPL 0.67 and it seems that that is cause why I cannot install normal ROM's.
Do you guys know a way to go around that ?
BTW I've tried SSPL and HSPL and they don't work.
Thank you
Have you tried to see if your provider or HTC for your area has an upgraded rom for your device. That may possibly upgrade your spl to at least 1.42?
If no luck there, have you tried doing a hard reset to see if that reverts you to your original rom?
i've already talked to the guys or girls from HTC customer support but they said that the SN and IMEI of the device do not register in their database as an HTC device so they cannot help me.
regarding the hard reset i've tried it many times but no succes.
the solution as i see it so far would be a designated ROM for that tipe of device (pre-sale unit) or some tool to change the SPL of the device.
Have you tried the hard reset to see if you can get back to the original rom so that you have some functionality and not just a paperweight?
yes i did but nothing happend
Sorry to check up, but you won't be the first to have gotten it wrong - you do know the difference between a HARD reset and a SOFT reset?
Hard reset = power off, hold in both UP and Down volume buttons and while holding them in power up the device. Then press volume up and volume up again.
that's what i did
I've heard that there some apps out there that can modify the SPL version. Does anyone have any idea where I can find such an app ?
Contact me, mayb I can help you out!
please i need your help
i flashed wrong Hard Spl in my jamin
and now my jamin didn't turn on without charger
and when i try to make conection with usb it turn off and screen flash for a second and turn off
is there is any solve or any thing can i flash from external memory to solve this problem
check your usb cable, still normal, or is no longer! turn the device off and remove it then reenter betere .... try to soft reset the device like this : Use the stylus to lightly press and hold the RESET button on the bottom of your device. Your device restarts and displays the Today screen.
Warning! Always turn off your device before performing a soft reset. To perform a hard reset
Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Warning! Always turn off your device before performing a hard reset. Your device will be set back to factory default settings. Please ensure any additional installed applications and/or user data has been backed up before this is performed. if the problem continues go to the bootloader menu and you try to Flash ROM with the original ROMs for your device ....
many thanks for your replay
but i try all this things but the problem still
i think the solve is how to downgrade ipl/spl from 2.21 to original 2.13
is ther is arn way to do this???
why do not you try looking at the WIKI ..? My knowledge on the Wiki is IPL / SPL 2.09, 2.10 to Jamin try and do not despair friend
I traied a lot of officeal room but in go to 80% and stop
i sucses to downgrade Ipl to 2.20
but i can't downgrade Spl - is there is any way to do this ????