STORGE FREE 42.55 MB and PRGRAM FREE 9.10 MB - JAMin, XDA Neo, S200 General

STORGE FREE 42.55 MB and PRGRAM FREE 9.10 MB
is it normal ?
why it is not 128 mb ?

:shock:

Could you be more especific? The memomy is after installation or what.

isn't 128 because that space have operative system and all other rom programs

To be a bit more precise, when they write 128MB ROM on the box what they really mean is:
64MB (approx.) BOOTLOADER + OS + RADIO
10MB Extended ROM (could be salvaged with a registry tweak)
Whatever is left - storage, but keep in mined about 10+ MB worth of stuff is installed from ext ROM after hard reset.
42.55 MB free storage pretty clean device, but I think you have a whole lot of stuff running in the background as I usually have about 22MB program memory after soft reset.

Related

How Much Memory Should I have?

Newb- ~ 1 week with new Cing-8125 - 1st handheld - it rocks
Why does "Device Info" say
RAM = 64MB
Flash = 128MB
But "Memory" shows:
Memory storage = 47.46MB
Program Total = 44.00MB
This is only 91.46MB
Is this correct ? Where's the rest?
Thanks
I am curious about this as well. According to Device Info, I should have 64MB to run programs and 128MB for storage, but I am well under that. :?
Can anyone explain what is going on???
Thanks,
Dave
You're only going to get 128 MB of ROM and 64 MB or RAM with nothing installed on the device. The ROM, which consists of the OS, the Cingular stuff, and the other included applications takes up quite a bit of storages space, about 57 MB. As for the RAM, the OS needs memory to run as well. I've installed a ton of things on my Cingular 8125 already, so I have no idea what the standard amounts are, perhaps someone would be so kind as to post them.
Missing ROM & RAM
PointZero said:
You're only going to get 128 MB of ROM and 64 MB or RAM with nothing installed on the device. The ROM, which consists of the OS, the Cingular stuff, and the other included applications takes up quite a bit of storages space, about 57 MB. As for the RAM, the OS needs memory to run as well. I've installed a ton of things on my Cingular 8125 already, so I have no idea what the standard amounts are, perhaps someone would be so kind as to post them.
Click to expand...
Click to collapse
I understand that, but...
I would expect it to report like so:
Storage
Total: 128 MB
In Use: 38.54 MB
Free: 89.46 MB
Program
Total: 64 MB
In Use: 31.73 MB
Free: 32.27 MB
But instead I get:
Storage
Total: 47.46 MB
In Use: 38.54 MB
Free: 8.92 MB
Program
Total: 44.01 MB
In Use: 31.73 MB
Free: 12.28 MB
So what happened to 80.54 MB of ROM (Storage) & 19.99 MB of RAM (Program)? Are you saying that the base OS uses up this much RAM & ROM, and the system just shows it as not even being there? The actual image (nk.nbf) in the OS installer is 80MB in size so this does seem to add up. :wink:
--
Dave

Initial memory on HTC P3600

The initial memory occupied in my HTC P3600 is 10,98MB of Storage memory and 23,86MB of Program memory.
This means that about 50% of Program memory and 20% of Archive are not usable from beggining...
Is it the correct or I have some settings or ROM version that is memory comsuming?
Oops..May be it is usefull also to give you the other memory informations (in the while seems that other memory has been used ):
Storage
Total: 54.99 MB
In use: 11.21 MB
Free: 43.77 MB
Program
Total: 48.75 MB
In use: 23.98 MB
Free: 24.77 MB

[Q] unusable internal memory

Hi, I am using MIUI with Android version 2.3.7. Everything is allright, but I only have 217 mb of internal memory in total. The MIUI ROM and other apss take up about 180 mb and although I have moved some apps to sd I now only have 40 mb available. It should have 512 mb internal memory. Why can't I see and use all of it? Is it possible that I didn't delete windows mobile or one of the other android roms I have used so far, though I am sure I have tried "clean install" a few times?
Dalvik cache & app data take up a lot of space too, you could move these to th SD ext partition to free up more internal memory. You will need a2sd installed I think to enable this.
Peace
Sent from my HD2
the 'available internal memory' figure only counts the data partition size.
so (for example) if your rom requires a 200 meg system partition, you would show..
512 minus 200 minus whatever cache size you flashed minus the boot and recovery partitions (lets guess 50 meg) so your available internal memory on a completely fresh install, no data or apps, would still only show a max of 262meg available.
Also, if you flash a system partition bigger than required, you dont get the extra space to use. So flash a 180meg rom onto a 250 meg system partition, and you lose 70meg, the system wont use it for anything.
samsamuel said:
the 'available internal memory' figure only counts the data partition size.
so (for example) if your rom requires a 200 meg system partition, you would show..
512 minus 200 minus whatever cache size you flashed minus the boot and recovery partitions (lets guess 50 meg) so your available internal memory on a completely fresh install, no data or apps, would still only show a max of 262meg available.
Also, if you flash a system partition bigger than required, you dont get the extra space to use. So flash a 180meg rom onto a 250 meg system partition, and you lose 70meg, the system wont use it for anything.
Click to expand...
Click to collapse
Thank you so much. My ROM itself is about 100 mb. How much data partition size should I actually spare for such a rom? Also could you please direct me to the post that tells me how to arrange the data partition size and do the rest of flashing my rom again? I would really like to have more available internal memory. Also I would be happy if you told me what ext 3 or ext 4, whatever it is called, is and if it has anything to do with internal memory.
If the rom is 100mb then you need a partion of at most 110 so if your using clk or magdlr..after you have wiped nand...partition it to 110 if possible or use 105 even cos you don't wanna be giving up wanted space..

What is the difference between the ROM size and internal Memory RAM???

Hi Guys,
I have a Defy Plus with DFP-231 Asian Retail version ROM. I had some memory cleaning widget which shows that my applications could use a total of 350 MB memory.....
I thought that the D+ came with 2 GB internal memory so I could load upto ~2GB of games(apps) running. ...:crying:
With all this confusion...
My Question is : What is the Difference between The RAM and ROM and Why is my widget showing only 350 MB usable for apps???
Kindly correct me If I'm wrong in my assumptions.
Cheers,
Vic
do not confuse ram with rom. rom is the storage which stores installed apps and system files, its like the hdd in a pc, and it keeps its content when powered down.
ram is a temporary storage from where apps run, and it clears after a power-down. (memory in a pc)
the defy has 2gb built-in storage (rom), from which 1.2 is usable for apps, and it has 512MB ram (around 470-480 usable).
you probably have a lot of apps installed, thats why the widget shows only 350mb remaining.
Thank you for clearing this
zakoo2 said:
do not confuse ram with rom. rom is the storage which stores installed apps and system files, its like the hdd in a pc, and it keeps its content when powered down.
ram is a temporary storage from where apps run, and it clears after a power-down. (memory in a pc)
the defy has 2gb built-in storage (rom), from which 1.2 is usable for apps, and it has 512MB ram (around 470-480 usable).
you probably have a lot of apps installed, thats why the widget shows only 350mb remaining.
Click to expand...
Click to collapse
Hi, :laugh:
Thank you very much for clearing this.. So does that mean when I install apps to my phone instead of SD card they get installed in RAM and not ROM????
Cheers,
Vic
vicky_ said:
Hi, :laugh:
Thank you very much for clearing this.. So does that mean when I install apps to my phone instead of SD card they get installed in RAM and not ROM????
Cheers,
Vic
Click to expand...
Click to collapse
umm, no. they get installed in rOm, thats the permanent storage, ram is temporary. although there are solutions to install apps to sdcard. (app2sd, data2sd)
vicky_ said:
Hi Guys,
I have a Defy Plus with DFP-231 Asian Retail version ROM. I had some memory cleaning widget which shows that my applications could use a total of 350 MB memory.....
I thought that the D+ came with 2 GB internal memory so I could load upto ~2GB of games(apps) running. ...:crying:
With all this confusion...
My Question is : What is the Difference between The RAM and ROM and Why is my widget showing only 350 MB usable for apps???
Kindly correct me If I'm wrong in my assumptions.
Cheers,
Vic
Click to expand...
Click to collapse
Usable for Apps means memory that can be used to store apps permanently.. It is the available ROM on your device. As stated before the 2GB memory is shared by OS & Apps.
RAM (512 MB on defy+) is temporary and is cleared on reboot and other activities.

[Q] Help request: SwitchMe and Internal Memory

Installed SwitchMe. Worked OK.
Some time later, installed a new rom [Echo 4.3].
SwitchMe was not present on first rom boot
Now internal memory shows: Total memory 23.81GB
Apps: 4.91 GB
Audio 28 KB
Cached 2.60 MB
Misc. 9.21 MB
Dummy 9.88 MB
*AVAILABLE SPACE* 423 MB
About 19 GB missing, and I keep getting the 'Storage space running out' error.
Phone unusable for any app.

Categories

Resources