I did pair my Atom with HP iPaq2210. I can send file via Bluetooth from Atom to 2210 but I can't receive the file via Bluetooth from 2210 to Atom. It said "The connection to the peer Bluetooth device failed.".
When I paired the devices, "Serial Port" and "Dialup Networking" are the only services available. Is that normal?
Does anyone encounter the same issue?
Start > Setting > Connections > Beam and make sure the box " receive all incoming beams " is tick .
Good luck.
Ticked already.
Interesting thing is I can receive the Contact/Task via Bluetooth from 2210 to Atom. Don't know why it is not working for the other files.
Related
I have two devices Wizard(qtek 9100, 1.1.7.9) and HP 2110. Error (сan't connect to ..) happens when I try to send file VIA BT from hp to wizard.
Option "receive all incoming connection" in IR settings enabled.
HP 2110 have WIDCOMM BT stack. All neccesary options have been enabled. File trnsfering works with another PDA device (wm2003, widdcom).
PS: Dial up networking via BT doesn't work too
Hi -'Option "receive all incoming connection" in IR settings enabled.' that for infrared.
In settings\bluetooth make sure bt is on and discoverable and you need to pair devices first in settings\bluetooth\devices.
Should work then If not trash your hp lol
Thanks. But option "discoverable" has enabled. In several forums i have seen that IR option "receive all incoming connection" must be enadled too. I think this is problem in communication beetween 2 different BT stack, because I have problem with dialup connection via BT too.
Has anyone had such problemm?
i cant receive incoming bluetooth messages/files when ive turned on bluetooth and made my device discoverable to other devices.
other devices can find the universal but cant seem to connect without pairing...
i can send files with bluetooth without a problem, but i also want to be able to receive (without pairing)...
any help on this?
Go to Start - Settings - Connections - Beam
and enable Receive all incoming beams
that should do it.
/Mad
thnx...
thought this was only for infrared
works perfectly now
Can anyone help? I have a good BT connection to the car, and I can see the HANDSFREE BT profile from my QTEK9000 (WM5) using the o2 mini new bluetooth stack (AKA bluetooth stock) I downloaded from your forum.
The Prius instructions say to
1. Touch "Transfer data" to display "Select group" screen.
2. Select the group to transfer data to.
3. Touch "Overwrite" or "Add to".
4. Transfer the phonebook data to the system using the Bluetooth phone.
Screen in car shows "Under transfer".
Instructions do NOT say what file to send. I have tried BT beaming "pim.vol" to the HANDSFREE profile, but after about 5 minutes, the car says "Data transfer failed", although the phone says the file was sent.
Any ideas please? :roll:
Mate I don't think you will be able to do so, I couldn't transfer anything from my blue angel to my T-Spirit. I had to use my wife's Nokia to tranfer my phone book. Good luck.
J
Hi all !
Anybody were able to transfer files via BT between PC and TyTn ?
I cannot....
Help, please.
i'm no problem to do that....
try to check the beam option ON and make sure that BT in ON and visible...
try with this...
cheers
Bubu
BT doesnt neet to be visible except you didnt pair the device once. So after paring the device you can make the TyTN hidden and you are able to send files trough OBEX. Worked well since i am transfer some files
fgro said:
BT doesnt neet to be visible except you didnt pair the device once. So after paring the device you can make the TyTN hidden and you are able to send files trough OBEX. Worked well since i am transfer some files
Click to expand...
Click to collapse
My laptop and Hermes are both paired and can do ActiveSynch via BT. But when i try from PC explorer "Send To -> Bluetooth" it does not work.
It says "File transfer service is not found on the device.". After i turned on "Receave all beams" it did work fine. I thought that this is for infrared only.
Am i correct here ?
you need to have this activated, otherwise you arent able to receive bt obex files. Its both BT and IR.
Hi,
I wrote a dialer which works well with "Cellular Line", makes CSD data call, etc.
Having troubles with "Bluetooth" and "Bluetooth device" lines.
On "Bluetooth" having error 0x80000048 during lineOpen().
I suppose that when I tell TAPI to use bluetooth device (by specifying corresponding lineID) it should call some underlying level to establish connection with bluetooth modem. But how it knows which device to use?
My purpose is to use universal interface (TAPI) and not to have deal with AT-command, ports, etc. And if a select Cellular it will call via onboard GSM (already implemented), when I select bluetooth device it will call via external bluetooth modem.
Is it possible?
Thanks.