Hi,
I'm using a MDA II (T-Mobile) and a O2 card.
I'm interessted in umgrading to a O2 rom but I'm afraid of loosing warranty. I'm not afraid that something should be wrong by flashing the o2-rom to my XDA II but I have 2 years warranty left and in that time some other things may happend to my system that I must use the warranty.
So I need the O2 settings of the O2 rom to use MMS, WAP, GPRS,... Which file of the O2 rom have stored these settings?
There are a lot of files in that rom, what are these all for?
I coppied allready the homezone tool which works fine on my XDA II (don't start automatically - coppied to autostart but don't start , only manual start works - somone a sollutions for that?).
Does anyone know for what all the programs in my startfolder are for? There are a lot of entried which will fast system... But I don't want to find it out by trieing....
Does anyone knows a good simulation for the XDA II to test software. I dont' want to put all on my life system and delete again. I thing the regestry will grows bigger and bigger....
Erik
I've got an XDA Mini, but installed using the corporate install - no O2 rubbish.
I used the registry hack to change the dialpad back to the original WM5 one, but now the smartdialler thing won't work. I've changed back to the O2 one and it works again.
Any suggestions to get smartdialler working with the WM5 dialpad?
Cheers.
The extended Rom contains additional configuration and registry settings as a CAB. I reset mine without the O2 stuff then ran Smartdialing_enable_0915_signed.CAB from the extended rom directory. Restart the device after that and you've got the smart dialler back (well thats how it worked for me anyway!).
Does not work. It is possible more in detail?
I think will not work!
I Have a T-Mobile MDA Vario, chnge registry too because don't like T-Mobile Dialer skin, and smartdialer not work anymore... same as bsterngillet.
Now I change ROM to Qtek and work dialer and smartdialer WM5 default... and is much light = speed!
artirm said:
Does not work. It is possible more in detail?
Click to expand...
Click to collapse
When you say not working, do you mean the .CAB file is not there or that nothing happens when you run it?
If it isn't there I could post my copy to the internet but other than that I am only going on my experiences with UK ROM's I'm afraid! On another thread, user 'Plantagoo' has cleared up what the CAB files do more so it may be that your device does not have the smartdialler program (I'm just guessing here!).
Where to take Smart Dialing for Pocket PC ver. 2.2?
Good day
is it possible to change my qtek s100 - O2 ?
Can you give me a piece of advice..im just a new user of pocket pc phone
tnx...
jetty
From what I understand from your post is that you want to change your ROM from Qtek to O2, right? Yes, its possible. There are tons of information in the Magician Upgrading forum. Being a newbie, I suggest that you read through all the related threads before jumping into upgrading unless you are quite knowledgable in these things.
Since you are living in the Philippines, I don't see the need for you to change to O2's ROM (O2 is one of the providers in Europe) since the providers there are Globe, Smart, and Sun. This has been said many times - the Magician's ROM is composed of 3 parts, the OS ROM, Extended ROM, and Radio ROM. The OS and Radio ROMs are exactly the same for all variations/brands/providers of the Magician (brands/providers = Qtek, iMate, O2, T-mobile, Dopod, etc.). The Extended ROM contains specific modifications made by each brand/provider, and aside from the standard programs like CallerID, PhonePad, SmartDialing, it mostly contains auto configuration software for SMS, MMS, GPRS, and maybe even Email.
What you should do, like most of us did, is to apply the BigStorage ROM and then take what ever Extended ROM software you like from different brands. There are also Extended ROM auto configuration files for Globe, Smart or Sun. All this software can be found in the ftp of this forum.
Again, please read all related topics, make a backup of your data and current ROM before doing any upgrades.
Good luck, kabayan (as it is said in your language).
tnx kababayan.....
I will just try to have the Extended ROM for my phone..
I wish I can Make it.... :lol:
again tnx
Hi Guys,
I got my Universal [O2 XDA Exec] today, its a replacement for my old Ipaq H5550. So far i'm very impressed with the PPC side of it. But totally lost with the phone side
One of the things i've already discovered is its not locked to O2, and i've already tested it with my Orange PAYG sim. Which is the reason for this post.
Is there a way to use the O2 settings/servers to daytime [work] use, and the Orange settings/servers for night [playtime] ?
I don't need a one button solution, i don't mind getting a little messy.
if you can extract the cab files for operator settings fro the orange and o2 extended rom and save them as read only on your device you could just run the one you want to use and soft reset.
Hi Midget_1990,
Damn, that was quick.
I'll over to the FTP site and have a play.
Thanks.
OK, had a look in the Ext ROM folders, but theres no clues in their names, and I don't know enough about CAB's to pull them apart.
I did find a thread explaining what the CAB's in the O2 Ext ROM do, and a modified CAB with just the O2 settings, [Thanks Dingo].
Can anyone tell me if someone has made a simular CAB for the Orange settings, or which CAB's in the Orange Ext ROM the settings are in ?
Thanks Guys.
Hi guys,
I was trying different ROM's on my Universal today, to see what the different operators were offering. When I came across the Orange Today Plugin. I like the idea of it, but not the setup.
So, I was wondering if anyone here knew how to add, remove, or change the items in this plugin ?
I did a little search of the forum for an answer to this question, but it seems i'm looking to do the opposite to what everyone else is doing.
re
could u be more specific...
In this screen dump, you can see the plugin.
I'd like to be able to change the selections and the links in each selection.
For example, change the five links in the Web selection of the screen dump to five of my own URL's.
Or better still, add or replace one of the selections in the plugin with one that points to My Device. That when highlighted would have links to 'My Docs' 'SD Card' 'Program Files' etc.
I hope that makes sence.
I'm searching the same solution.
I'm searching the same solution.
Hi filippodisvevia,
I fonud how to change the URL's, but not the sections.
Look in your Windows folder for a file called Full_one.xml, the URL's are at the top and the link names are near the bottom.
Good luck :wink:
thnx
ZaForD said:
Hi filippodisvevia,
I fonud how to change the URL's, but not the sections.
Look in your Windows folder for a file called Full_one.xml, the URL's are at the top and the link names are near the bottom.
Good luck :wink:
Click to expand...
Click to collapse
Thank's so much.
I'm starting 8)
I haven't Full_One.xml
I use only the plug-in extracted by the orange rom.
Some other ideas ?
hi, where can i get this plug-in? and can i install this or t-mobile rom ?
cheers, cudo
cudo said:
hi, where can i get this plug-in? and can i install this or t-mobile rom ?
cheers, cudo
Click to expand...
Click to collapse
Hi cudo,
Here http://forum.xda-developers.com/viewtopic.php?t=61711&highlight=today+plugi+orange you can file the cab e some other file.
I'd like to personalize the cab if I understand how it work.
It works on qtek 9000\jasjar\xdaexec so I think is good for t-mobile too.
Hi Guys,
That plugin is from the SPV M3100 and works diferently to the Universal version. See my post at the bottom of that link above.
If you want the proper Universal Today Plugin with bigger icons for the Universals bigger screen. You'll have to install the Orange M5000 ROM, as its built into it. Plus the Orange ROM has just been updated with a new Radio driver.
I'm using the new Orange ROM, with the last O2 Ext ROM, and the Signed_ORUK_HomeScreenReg.sa.CAB from the Orange Ext ROM as it has the Reg settings for the plugin. And everything is working great. 8)
ZaForD said:
... Signed_ORUK_HomeScreenReg.sa.CAB from the Orange Ext ROM as it has the Reg settings for the plugin. And everything is working great. 8)
Click to expand...
Click to collapse
Can you attach the cab ?
:thx:
I downloaded the cab from ftp, and install it, but nothing seems to hapen
I have T-mobile base rom and Qtek extended rom installed...
Hi people,
This thread is more usefull if you are looking for a cab file.
http://forum.xda-developers.com/viewtopic.php?t=61711&highlight=
I installed the cab posted and works fine on my wizard. Although u do lose all your other today plugin functionality. But the plugin is handy. even though limited in use.
I was thinking of finding some great developers on this site who would like to creat such a program but which could be used alongside the other today plugins. Anyone interested let me know.
Cheers,
Shah
What do you mean "finding some great developers"?
@filippodisvevia,
Heres the CAB file, but it ONLY works with the Orange ROMs. As the files needed aren't in the other ROM's.
@gtm55,
You need the Orange ROM installed before the CAB file will work.
filippodisvevia said:
What do you mean "finding some great developers"?
Click to expand...
Click to collapse
Great or good developers. Who are able to program such a plugin. because u have beginner programmers, novice programmers, and advanced programmers and if you like great programmers.
Just to keep it simple a person or persons who are able to create such a apps, which is usable in different WM phone devices. I just used great, because I know there are some pretty great (good) programmers on this site.
Cheers,
Shah
Thank you, ZaForD, I really like Orange plug-in, but I'll stay with T-mobile (1.30.115 WWE).
Thank's so much fora cab Zanford
@shah2
Now understand.
Every help will be fine.
:wink: