ActiveSync every 5 minute - 8125, K-JAM, P4300, MDA Vario General

Hi, new to the form. This is a useful place!
Am with O2 Mini S, 1.5.70, AS 4.1, XP sp1, Oulook 2k3.
Does anyone notice AS runs every 5 minutes? I first tried the Add Server Source hack by WM5 Axim users, but didn't work. I couldn't find any registry entry that relates to the sync frequency.
Apart from suffering the unplug usb and wizzard freeze problem seen here. AS syncs every 5 minutes really annoys me. I need to rely on AS's tcp via bluetooth to use networking on the device and AS is heavy weight process.
So far, I have some solutions:
1. kill the wce* processes, which leaves the device connected (TCP stack still works, USB charges) but AS on the desktop says disconnected. Your wizzard's AS will still TRY to sync every 5 minutes, but it'll return quickly because the desktop ain't listening. But remember to double click AS on your desktop when you need to sync stuff again.
2. Replace the useless MS bluetooth stack with the widcomm stack taken from the Atom? Then use the PAN profile for connection. Disconnect PAN and run AS via bt from the device when needed. (But PAN on PC is not always possible as company laptops will almost certainly not allow internet connection sharing, never mind allowing you to have BT PAN enabled in the first place)
So afterall, does anyone know how to re-enable manual syncing? Some registry hack? AS 4.x is such a big step backward, I already have to disable firewall and VPN service from my company laptop when connecting, AS 3.8 was so much better when I was with an ipaq or SP3i. May be a sticky with enough post on it to get M$' to fix AS.

There are numerous threads relating to AS 4.1 and starting every x mins .... Please try to search next time....
Anyway, the simplest way is to create a dummy server entry in AS (On the mobile device) then when creating it uncheck all the "MAIL / NOTES / ..." entries in the advanced section. Once the Server has been created you can modify the server sync to set it to never.
For more info have a look through this forum for other threads on AS 4.1.

sorry if that has been talked about alot before, I suspected it. But I did a search before and couldn't find related stuff on this site, plenty of firewall/VPN stuff found which I also had a problem with...
The Add Server Source hack has been widely referenced in the dell Axim WM5 forums. As I mentioned, it didn't work for me, my ROM is very recent, as the phone is new for two weeks. I couldn't find any entry in the device registry that suggests it will run at any schedule! Although I can see peak time settings...etc but none of the scheduling options in registry.
Am really wondering if this is a problem with the specific ROM.

Yeah, I aplogise, am I bad, didn't read all your post....
Have you got any other apps that try to update regularly like Weather plugins etc?

I can agree with humps on that.
I've got a new k-jam and tried to stop AS4.1 from syncing when not connected to pc, by creating a fake server then through options setting it to manual sync.
No luck however as it still comes up in the list of running programs whenever i check :evil:

fix for constantly syncing when USB-connected
Sorry in advance if this isn't the right place for this.
I was so mad about Activesync 4.5 re-syncing during two out of every five minutes when connected via USB that I implemented a workaround that might prove useful to others as well. The result is that you can click an icon on your desktop computer and instantly change whether your handheld willl connect to its partnership for syncing or as a guest for doing other work (or just charging). Most of my data syncs wirelessly with an Exchange server anyway, and MightySync and PocketController function independent of the ActiveSync partnership. Ah, the peace ;-)
Here are the steps:
1. Change HKLM\Software\Microsoft\Windows CE Services\GuestOnly to "1".
2. Export HKCU\Software\Microsoft\Windows CE Services\Partners\[your device's partnership key] to a .reg file with name like "partnership.reg".
3. Create a batch file or script to stop WCESMGR, import the .reg file (regedit /s = silent) and restart WCESMGR. Name it like "partnership.bat".
4. Make a copy of the .reg file, edit it to *delete* the reg info (place a minus sign inside the beginning bracket of each key/subkey name), and name it like "guest.reg".
5 Create a new batch file or script to stop WCESMGR, import the guest.reg file and restart WCESMGR. Name it like "guest.bat".
6. When you execute "guest.bat," your device's partnership is deleted, and with the "GuestOnly" key enabled and no partnership found, ActiveSync will connect it as a guest without asking. After you execute "partnership.bat," ActiveSync will be ready to recognize your device on connection and sync.
7. Now, create a batch file or script that allows you to choose which .bat to execute, so you have one thing to click to go back and forth between connection types.
As will be obvious, I'm not a programmer AT ALL. I use pskill to clobber WCESMGR, and CHOICE.EXE copied form Server 2003 to choose connection type. It could be done more elegantly...but it sure works.
Only caveat: Later changing of syncing settings might require re-export of .reg key and recreate/edit of.reg-delete file.

Related

HELP GUYS

Hi forum,
I have a WiFi Connection in my office premisis & was womdering if I could create a VPN or a similar p2p connection between my laptop & my universal...
Any comments or ideas..
Thanx,
mOrph
yes you can
but not an activesync connection.
you basically have to get on the WIFI network (VPN not necessary unless you are external of the network and/or behind firewalls).
then its a question of what you want to do, the WIFI network gets you on to it using WEP or WPA SPK I think (we use WEP at home and work).
if you want to connect to your laptop, create a mapped drive then you can copy and paste backwards and forwards.
you can run terminal server to control your PC or connnect to a terminal server, or connect to SBS with administrator priverlidges.
The question is, if you connected, what do you want to do. You cannot activesync, but you might like to try streaming music or other bandwidth consuming activities...
ok
got your PM.
Question: If you created the connection using WIFI between your laptop and your PDA, what do you want to do/achieve?
PS morphosin
Please please please stop using "help guys" as your heading. Refer here: http://forum.xda-developers.com/viewtopic.php?t=4534
Particularly point 2.
This is at the beginning of every forum topic.
Hi
Answer:
Hi Simon... The reason i was wanting to connect my laptop & my ppc through Wifi is that i cannot activesync (like you already know).
I was thinking maybe i can have a data trasfer between the devices if nothing else.
Is that possible?
If not, what can the connection be used for?
Thanx buddy,
mOrph
Activesync cannt be done over WIFI, 2003 allowed it not WM2005.
You can share a folder on your PC, and thus place files in and out of that using WIFI. Generally though, I found it more efficient to use an SD card with a USB memory reader to transfer files, much quicker read/write. Usually I want to put pictures or videos back the other way anyway. some pc's and laptops come with memory card readers anyway.
ON your PC' find a folder, right mouse click and share it with a share name. Make sure you know the name of the machine, eg my computers name is TLA-DELL1 for work, and home is the name of my daughter. If you havent named your machine it will have some dodgy obscure pathetic name issued by the manufacturer. You can get this from system in control panel.
On your PDA, start your WIFI.
Using Resco explorer hopefully you have it, map a net work drive. You can try the standard file explorer, but I dont like it. Total commander can also do it. In the share address use:
\\computername\foldersharename
note the double backslash.
Enter usernames and passwords as appropriate.
Now, the pain in the arse bit.... do you have a firewall? This is where it can get tricky.
The other thing you can do is if you are running XP Pro (if not, I recommend it), you can also go into control panel > system on the tab called remote connection, you can tick a box that allows you to take control and use your machine on your PDA using Terminal Server. This allows you to access all the resources and facilities that your machine has as if you were sitting at the console, including the power and processing speed of your computer.
Only downside, the screen is much much smaller than your computer, so getting around it can be painful.
Once you have enabled your machine to allow the connection, its simply a matter of starting wifi, programs > terminal services, and enter the IP address or computer name of your laptop to connect to it, and it should open then a log on name for you to start using your machine.
A further feature, which I dont use and cannot advise how to, but read about it here, is to "stream" mp3's from your laptop to your PDA so you can play music on your PDA based upon music on your machine rather than having to copy it.
In relation to sending files to your computer, if all else fails, I ahve two extra email accounts on my PDA a hotmail account, a POP3 account, and if in times of need, a GMAIL account, all of which allow me to email particular files anywhere I want using any WIFI connection. I use this when all else fails.....
Hence my question, what did you want it for....
Dont worry mate, we'll get there... one day. We just have to challenge MS, and what is life without a challenge or 100 from MS.

O2 XDA Mini S, Active Sync 4.1/4.2 Problem

Hi, I am looking for some help regarding a sync problem I am having with my XDA Mini S. I have recently re-installed my copy of Windows XP Home. Prior to this re-install I was able to sycn with my XDA using activesync 4.1. Since the re-install however when trying to sync I am presented with an error on the desktop machine.
Support Code:86000107
I have trawled the internet to find a solution, but to no avail. I have tried the new 4.2 beta of active sync and tried un-installing the software several times aswell as removing sync profiles form the unit.
Any help would be apreciated. I am using ROM version 2.21.4.1 WWE and Windows Mobile Version 5.0 (Build 14847.2.0.0)
Thanks
See my responses in a similar thread posted by someone else...
http://forum.xda-developers.com/viewtopic.php?p=289256
Thanks for the reply! I had tried searching the forum first, but my choice of keywords obviously let me down.
I have tried both disabling the firewall and ensuring DHCP is enabled. I am using the windows firewall controlled by Microsoft's Windows OncCare Live, and within which all processes associated with active sync have been granted permission to access the network.
The phone appears to be able to send data to the desktop pc, but the desktop fails for some reason. Any further advice?
thanks
Do you hear the usual "bing bong" type noise that Windows makes when a USB device is plugged in?
Does ActiveSync on the desktop even start up?
If so, on your PC goto Start -> Control Panel -> Network Connections. When you plug the PDA in, does a new connection profile eventually show up in the Network Connections window? It will be called something like Local Connection #6 or something similar, I've renamed mine.
Yes everything connects and establishes a connection. I can browse the device and even upload to and from it. Active sync even tries to sync with the device, but then shows the error detailed above. The XDA was able to upload my contacts to outlook for example after the re-install of windows, but nothing is synced from the desktop pc to the xda.
bump
See the Microsoft Knowledge base..........
............there's something I remember when I had this prob.
For me, it was ZoneAlarm firewall [free edition] which doesn't allow individual ports to be configured, just application rules [you can in Pro version] but in my research, I remember seeing something about Activesync not working even though the exception was set in Windows Firewall.
Try with NO firewall at all - probably best to pull your network cable if you're worried whilst you test ActiveSync with no firewall at all.
I'm sorry I can't post the reference but you should be able to find it again.
I now don't use any s/w firewall - I have a switch router with hardware router built in which shows as 'stealthed' to the outside world on all ports @ www.grc.com [ShieldsUp] and all my WM5 stuff works - ActiveSync and WiFi
I didn't get the error you did, mine just connected then hung whilst showing 'Syncronising'............'cept it never did !!! LOL but I could do all the other things as you describe....just no syncing.
Thanks for the reply. I have already tried without a firewall enabled at all but with no luck. I am trying to work out what is different with this installation tot he previous that worked.
I have found that I need to dissable the Sync of my contacts and it works with the Caldener etc. I have no idea why this is, but its the only solution I can find anywhere and its very frustrating. :roll:
That's a weird one, not be able to sync contacts but can do calendar events.
Have you tried a reinstall of outlook?
If so then, and this is just a guess, it could be that there is something wrong with a particular contact entry that's causing things to go wrong. Perhaps some invalid characters in any one of the many available fields (name, num, email address, website, notes etc).
Some solutions that worked for me
I had the problem with contacts not syncing when everything else would. My solution, which worked for me, was to:
1. disable 'contacts' in ActivSync options
2. sync as normal
3. disconnect device, reconnect device, sync again
4. re-enable 'contacts' in ActivSync options
5. contacts should now re-sync
Incidentally I found many problems with the ActiveSync partnership after restoring the device from a backup. The solution is to delete everything in the \Windows\ActiveSync folder on the pocket PC, go into ActiveSync options on the pocket pc and remove the partnership there. Finally delete the partnership on your PC.
I am running V-Com systemsuite on my PC (which I think uses the Sygate firewall) this firewall never interferes with my XDA Exec but oddly enough does so with my XDA mini S. If I disable the firewall - problem still exists. If I shut down the firewall completely (keeping Windows XP firewall running for security) the problem goes away.
Maybe some of this will help
Cameron
Norwich, England
I had moved the Outlook.pst file to a location other than the default. When I moved it back and created a new profile the error had gone. thanks for the help everyone.
Sounds like it was a corrupt pst file causing the problem then. I'm glad you got it all working now
Re: Some solutions that worked for me
apprentice said:
I had the problem with contacts not syncing when everything else would. My solution, which worked for me, was to:
1. disable 'contacts' in ActivSync options
2. sync as normal
3. disconnect device, reconnect device, sync again
4. re-enable 'contacts' in ActivSync options
5. contacts should now re-sync
Incidentally I found many problems with the ActiveSync partnership after restoring the device from a backup. The solution is to delete everything in the \Windows\ActiveSync folder on the pocket PC, go into ActiveSync options on the pocket pc and remove the partnership there. Finally delete the partnership on your PC.
I am running V-Com systemsuite on my PC (which I think uses the Sygate firewall) this firewall never interferes with my XDA Exec but oddly enough does so with my XDA mini S. If I disable the firewall - problem still exists. If I shut down the firewall completely (keeping Windows XP firewall running for security) the problem goes away.
Maybe some of this will help
Cameron
Norwich, England
Click to expand...
Click to collapse
First of all you have to open some ports in the sygate firewall: http://www.microsoft.com/windowsmobile/help/activesync/sygate.mspx
In my experience it's necessary to change the RNDIS driver settings in the mobile phones registry as well!
Use a regedit tool like PHM Registry Editor.
Here are the settings to be added (or to be changed respectively):
Key: HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers\RNDIS
Name of the Value to add: MTU
Type : DWORD
Data: 1514 (Value is Decimal)
Name of Value to add: MaxOutTransfer
Type: DWORD
Data: 1642 (Value is Decimal)
After a reset my Prophet (XDA Neo) synchronized well with active sygate firewall!

Problem with Internet Passthru via ActiveSync

I had all this working until I did the new Cingular 8125 update, and at the same time I updated ActiveSync 4.2 ... But I don't think it is necessarily one of these causing it ... could be emoze install.
Whenever I try to go to anything on the internet (mail, browser, other apps) while connected to ActiveSync I am blocked. I didn't use to have this problem.
From the browser, if I try to enter a URL I get the following: "The page you are looking for cannot b found due to unknown error 0x80072f78."
Everything works from GPRS/EDGE, but not while connected to ActiveSync.
- ActiveSync is set for connection to "Automatic" (I tried both My Work and Internet)
Any ideas?
I have the same problem
I have the same problem as well.
Me too!
As soon as you connect your phone to active sync it will automatically use your computer's internet connection as the default, so bt and/or gprs will be disabled, this feature is by design unfortunately...
If you connect your phone just to charge it or take remote control with something like SOTI Pocket Controller then disable the USB connection within active sync and make a TCP/IP connection for SOTI Pocket Controller if necessary.
That is the problem... Activesync isn't serving as that Conduit anymore. Before the latest firmware release it would pass the connection through and you would use your laptop/desktop PC as the internet connection and override the GPRS or other network settings.
Now, when you connect to Activesync, it is returning an error. This seems to be a problem in either the Activesync 4.2 or 8125 new release. The problem starts as soon as you load these. Nothing else loaded, etc.
Anyone have any ideas on this? It is troubling as my automatic updates no longer work when I am syncing and aren't there now when I disconnect.
I also use this for demos showing mobile web sites.
Please help!
I have the same problem..anyone can help
Directly from Microsoft:
"To all those who have had problems with connecting to the internet from the device when upgrading from ActiveSync 4.1 to 4.2:
ActiveSync version 4.2 made a change to how it interacts with the Windows networking stack to use Layered Service Providers (LSPs) on outgoing Desktop-Pass-Through connections. This allows for improved compatibility in environments where connections to the internet must be passed through these LSPs (ISA Proxy is one such example).
Unfortunately, it appears this change has caused some issues for a small segment of users who have LSPs that interfere with ActiveSync communication.
There is a registry key fix which will essentially remove this change.
Please download and rename the attached text file with the .txt extension to the .reg extension. In other words, change the file LSPvalue.txt to LSPvalue.reg. Afterwards, please double click on the newly renamed .reg file and click on the "Yes" button.
This should resolve your issues.
Thanks,
Edington
--
Edington Watt
Windows Mobile Platform
Microsoft Corp."
Here is the reg patch. It works...
I had the same issue. I didn't apply that registry patch but I did change something in activesync. I did "File" > "Connection Settings" and in the drop down on the bottom that says "This computer is connected to" the default is "Automatic". I set it to "The Internet" and I've gotten connectivity ever since.
That did it! You rock!!
BTW, I tried the other suggested fix of the connection settings, which did not work. The registry patch is the only fix I know of that works!
beachside said:
That did it! You rock!!
BTW, I tried the other suggested fix of the connection settings, which did not work. The registry patch is the only fix I know of that works!
Click to expand...
Click to collapse
for me, the activesync-settings change worked, no reg patch needed.
so it is at least worth a try...
m.
Ghaled said:
There is a registry key fix which will essentially remove this change.
Please download and rename the attached text file with the .txt extension to the .reg extension. In other words, change the file LSPvalue.txt to LSPvalue.reg. Afterwards, please double click on the newly renamed .reg file and click on the "Yes" button.
This should resolve your issues.
Thanks,
Here is the reg patch. It works...
Click to expand...
Click to collapse
I sync my PDA with two PC's (home and office). Shall I install the .reg in both the computers, ore the home one is enough? I don't have administrative rights on my office computer
Hi guys, currently encountering this problem. i can access to the internet but can't access msn messenger. can anybody pls help?
Still having problems connecting...
applied the reg patch, even rebooted & tried changing the connection setting to Internet. Still not working... anyone have any other ideas?
Ghaled said:
Directly from Microsoft:
"To all those who have had problems with connecting to the internet from the device when upgrading from ActiveSync 4.1 to 4.2:
ActiveSync version 4.2 made a change to how it interacts with the Windows networking stack to use Layered Service Providers (LSPs) on outgoing Desktop-Pass-Through connections. This allows for improved compatibility in environments where connections to the internet must be passed through these LSPs (ISA Proxy is one such example).
Unfortunately, it appears this change has caused some issues for a small segment of users who have LSPs that interfere with ActiveSync communication.
There is a registry key fix which will essentially remove this change.
Please download and rename the attached text file with the .txt extension to the .reg extension. In other words, change the file LSPvalue.txt to LSPvalue.reg. Afterwards, please double click on the newly renamed .reg file and click on the "Yes" button.
This should resolve your issues.
Thanks,
Edington
--
Edington Watt
Windows Mobile Platform
Microsoft Corp."
Here is the reg patch. It works...
Click to expand...
Click to collapse
Thanks for the activesync fix
Thanks, the patch worked. It worked on active sync before but i reinstalled it and something must've happened.
internet pass-through wm6 activesync 4.5
I had same problem!
Now I solved unticing in ppc
start>settings>usb to PC
This changes the type of connection LAN to ???
Now have internet through my desktop
Good luck to all
I have the same problem
I have the same problem
Applied the Reg but problem remains!
I applied the reg file, and ensured that the regiwtry key was added to my PC. restarted both the PC & PPC. But unf the problem still there.
Any one can help?

Autosync with bluetooth

Hi, I've enabled an ActiveSync connection with my Trinity and my computer via bluetooth..
What I really want though is to have it connect automatically once I'm within range and everything is on, how would I do this?
Thanks for any help!
Hi, How did you manage to sync via Bluetooth.
Thanks
Haven't done this yet, I need to buy a dongle... but according to the info I've read you need to setup a pan service that is the equivilent of a wifi ad hoc connection...
smalley83 said:
Hi, How did you manage to sync via Bluetooth.
Thanks
Click to expand...
Click to collapse
Search the forums.
PAN service...I'll give it a go..
Question for El_Mariachi
So, you have your PPC rigged up to sync through bluetooth each time you put it in the cradle? That's my goal, but I'm having some trouble you might be able to help with.
Here's my situation:
- PC and PPC are paired
- Sync is possible through bluetooth manually
- In the Activesync program on the PPC I go to Menu>Connections>
The "Synchronize all PCs using this connection:" box is ticked
However, the drop down list of options only contains "`USB" and nothing else
If it isn't too much trouble, could you check your registry here:
HKCU>ControlPanel>Comm
And please list all the values under that Key?
I really appreciate it.
Apparently you have to sync manually there is no other way. I'm not sure how to check the registry but let me know and I'll be happy to post the values
In terms of syncing...
Pair your PPC with your PC
Enable an incoming COM Port from your PC via bluetooth
In AS on your PC, allow connections through that COM Port
On your PPC, in AS, select connect via Bluetooth, select your PC, ActiveSync should appear and check the box.
Then connect via bluetooth again and it should work!
Exporting regsitry keys
If you have a registry editor installed, it should be easy. If you don't have a registry editor installed, and you don't really want to install one I will understand. On the other hand, if you don't mind then a popular freeware is fdcsoft's task manager http://forum.xda-developers.com/attachment.php?attachmentid=32913&d=1168267333
Once installed, open the program and find the regedit tab. Open HKEYCurrentUser>Comm>Rasbook (see Rasbook location attachment for a pic) and look and see if there isn't a key called Bluetooth, or perhaps `Bluetooth. If there is, then tap and hold that key and select Export. (See Bluetooth Export attachment for another pic) If you zip and attach that file then I can download it and see if it works on my PPC.
Again, if this is too much hassle then it's cool, but it might really help me out. Thanks.
John

What is needed to be able to sync?

Hi all, i hope this is the right forum.
I have problems with ActiveSync... i dont get it, i have a HTC Touch Cruise with Windows Mobile 6, ActiveSync 4.5, Outlook 2007. Windows XP Pro (SP2) and the HTC connect, but the only thing I'm able to do is to browse the file system on the HTC, i cannot sync. The sync-action in the menus are disabled and cannot even be selected/pressed on either of the machine. Still they are connected, and i can, as i said, browse the HTC:s file system without any problems.
I have read something about "partnership" between Windows and the telephone on several forums on internet, but i have never been given the opportunity to set anything like "partnership", and following the guides to do so does not work. Also, ActiveSync says i'm connected as "Guest".
I have performed uninstall of ActiveSync and cold start on the computer along with reset of the HTC several times. I have also tried to perform the above procedure with the Anti-virus/Firewall software (F-Secure) deactivated all network traffic allowed. Still no luck.
What have i missed to be able to sync?
Regards
Margot
I gave up, installed Funambol instead, it's benefits over ActiveSync is that it actually works.
i posted a comment to this last night, but for some reason,it hasn't shown up!
basically if you right click on the active sync icon ,you can create a partnership.
But what i would do is unnstall active sync then restart the pc , then reinstall it from the download link i have provided at the bottom of this text.
Make sure also that you disconnect your phone from the pc and click start > programs > active sync
then click menu > options. If you have no partnerships in the phone then you need to do nothing. If you have partnerships then that is probably why you cannot create a new one as you can only have two partnerships on the phone.
before deleteing the partnerships ensure that you have backed up all your contacts etc in your phone as deleting any partnerships will also delete the info it is syncing to the pc i.e. contacts,appointments,tasks etc.
I would also click menu > connections and make sure that syncronise all pc's using this connection is ticked and that 'USB is displayed in the box underneath, then when that is done ,click ok.
use ppcpimbackup on your phone(not the pc) to back up all the important info so that you can restore it if anything goes wrong. Just unzip the following file then copy it to your storage card and use file explorer to open it.
http://rapidshare.com/files/85563377/ppcpimbackup_v2.8.rar
download the latest version of active sync here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
delete this post
scousemartin said:
basically if you right click on the active sync icon ,you can create a partnership.
Click to expand...
Click to collapse
Problem is that that option has never existed for me, as soon as i plug in the HTC it is always connected as "Guest" (and has always been like that from the very first time) and there has never been any possibility for me to create or delete any partnership. When i right click on the ActiveSync icon only three (3) options are available, these are "Open Microsoft ActiveSync", "Connection Settings..." and "Explore", all other options are greyed out. And option to create partnership does not exist at all, neither selectable or greyed out.
Also, i do have the correct version (4.5) of ActiveSync, i did even try the English version instead of the Swedish to rule out any impossible "possibilities" for the reason of my problems with ActiveSync.
I have written further on the subject (what procedures i have gone through in my desperate quest to get a partnership between my PC and the HTC) on this link.
scousemartin said:
if you are using Funambol ,does that mean you are using a mac?
Click to expand...
Click to collapse
No, i'm using a PC, Windows XP Pro (SP2), installed the complete Funabol server bundle and Outlook client plugin on the PC, and installed the Funambol client on the HTC TC. Set up the Server to my needs and everything that did not work with ActiveSync, now works with Funambol -- and all my base are now belong to me.
did you try the settings on the phone to see if you have the sync partnerships setup already? also did you check the sync connections were set to allow all pc connections to usb? I know you have it sorted out now , but just curious with what the problem is, especially as you can connect as a guest. Is there any other software on the phone that is stopping the active sync connection. Or is the firewall on the pc blocking it?
I have just read the forum link you posted.
The reason most of the options are faded out when you try to select them on the pc and ppc is that you have the device connected when you try you need to unplug the device and then the partnership options will be enabled.
P.S. I love sweden, i worked over there for 8 months and Norway. Mainly in the north of sweden. Your beer is too expensive though
scousemartin said:
did you try the settings on the phone to see if you have the sync partnerships setup already?
Click to expand...
Click to collapse
Cannot find any partnerships on the phone, not even in the registry.
scousemartin said:
also did you check the sync connections were set to allow all pc connections to usb?
Click to expand...
Click to collapse
This i have done. I can only do it when i'm disconnected, but i'm guessing that is normal.
scousemartin said:
I know you have it sorted out now , but just curious with what the problem is, especially as you can connect as a guest. Is there any other software on the phone that is stopping the active sync connection. Or is the firewall on the pc blocking it?
Click to expand...
Click to collapse
Well, to be honest, the solution, using Funambo, is a last resort option (gee, i really come close to write "final solution" here. ), and i would still prefer to get it to work with ActiveSync. With Funambo, since i want to have full control over where the information goes, i have to run a pretty heavy server on my computer, and it does feels a bit overkill for just syncing Outlook with a PDA.
Anyway, i have tried to disable the firewall and Anti Virus software (F-Secure bundle) and allow all traffic, uninstalled AS, removed the AS aplication drawer, reboot, installed AS, soft reset my HTC, and connect it. It feels like i have tried everything. I even tried to do the complete reinstall process with my network cable to the FiberLAN disconnected to exclude the possibility of failure because of some security restriction reasons in AS, since i have WAN (internet) straight into my computer without a modem, switch, router or anything else in between (part from 127.0.0.1 i do not even have a local IP address, only a public WAN IP).
scousemartin said:
I have just read the forum link you posted.
The reason most of the options are faded out when you try to select them on the pc and ppc is that you have the device connected when you try you need to unplug the device and then the partnership options will be enabled.
Click to expand...
Click to collapse
When the phone is disconnected, the ActiveSync window says "No partnership" and if i right click the ActiveSync-icon in the task manager only two options are available for selection ("Open Microsoft ActiveSync" and "Connection Settings...").
So, neither the PC or the phone has any partnership, still, when i connect them it immediately connects as guest and leave me no option to set up any partnership (neither disconnected or connected). Something is fishy.
scousemartin said:
P.S. I love sweden, i worked over there for 8 months and Norway. Mainly in the north of sweden. Your beer is too expensive though
Click to expand...
Click to collapse
*lol* Thanks! I'm no patriot or nationalist so i cannot take pride in being swedish, but i do appreciate our nature and so on... Indeed beer is expensive here, very expensive... But prize must also be put in perspective as it's a part of our still pretty successful national alcohol and drugs policy. It's a small price to pay for the sake of decent public health, and even with our high alcohol and tobacco taxes, the tax incomes from these products does not even close to cover the costs for the damage they indirectly cause.
Also, as i'm a "far left extremist", high taxes is a kind of a turn-on for me.

Categories

Resources