Related
I'm aware of the various BT issues with the XDA II, and therefore installed BT Tools thinking it may allow me to use my handfree kit. Unfortunately I'm experiencing problems and not sure if this is me doing something wrong or there is a problem with the software. Basically the XDA II does not route either incoming or outgoing calls via the handfrees unit. I have do the following:-
1. Installed the latest BT Tools.
2. Created a bond with the Nokia Handfree kit, when prompted for the BT profile (the BT Tools icon screen) I select headset only.
3. Enable BT on the XDA II
When I make or receive a call is there any button or menu I should be selecting to enable the handsfree unit?
From the Today screen, make sure bluetooth headset mode is enabled.
And if Bluetooth Headset Mode does not appear on the today screen:
Start -> Settings -> Today -> Items and make sure Profile is checked. That will put the headset mode switch on the Today screen.
Thanks for the suggestions, I must admit I had missed the headset profile on the Today screen.
Even with the device paired, BT enabled & the Headset enable neither incoming or outgoing calls are routed through the handsfree unit.
Any other suugestions welcomed...
With the new bluetooth tools you need to transfer the call to the headset...
I find the best way when dialing is to have the phone ready to dial, then i hit the answer button on the headset causing the phone to dial & transfer sound to the headset @ the same time.
When answering the call the headset should ring and you press the answer button on the headset to recieve the call.
Ta
Christian
When you say press the headset button are you referring to the headset icon on the XDA or the Nokia handsfree button?
If its the Nokia button , I'll try this tomorrow, if not, then the icon does not ring and when receiving a call it is covered by the incoming call window.
Many thanks...
the nokia headset button
ta
Christian
Yep thats what I thought, I think I can confidently say there is a compatability issue with using the current version of BT Tools with the new Nokia CK-7W handsfree kit.
I've read the user manual for the handfree kit and that refers to switching/transferring the call between the BT devices using the button. The unit clicks as if there's something happening, but no call is heard, the unit works perfectly with a BT phone connected both Nokia & Motorola.
I would try uninstalling pocket BT tools - for using a headset it is of no additional value anyway. I do not have it installed and have never had any problems making or receiving calls with my SE HBH-30 headset.
Try using the earlier version of bluetooth tools, make sure you uninstall the version you have and also unbond/remove bluetooth pairings, rebond after successful install.
Pocket Bluetooth Tools is perfect! This is what I'm looking for, except I can't figure out how to listen to music thru my bluetooth headset.
Thanks for the great tool though, now I can make calls with my headset.
BRosenow said:
I would try uninstalling pocket BT tools - for using a headset it is of no additional value anyway. I do not have it installed and have never had any problems making or receiving calls with my SE HBH-30 headset.
Click to expand...
Click to collapse
The BIG advantage is battery life and not having to re-enable the headset profile each time you switch on the phone! With both PBT and/or Profile not displayed, I also get more Today real estate to play with.
With BT on all the time, I'm lucky to get four hours usage out of my Xda II, with PBT turning it off after five minutes the time can go up to almost seven. Sure, there is a short lag between call coming in and the headset (HBH-65) ringing but I can live with that and it even works well with Pocket Zen Phone. I also like the last number redial facility it adds to my headset. PBT rocks!
I found one problem with this program. My device won't automatically turn off after installing this tool. The backlight turns off, but not the device after certain minutes set. Who do I report the problem too.
i have got this problem to carnt get the xda i to connect to my car blue tooth hands free kit it finds the kit but nothing gome on guy get ya thinking heads on n help :idea: to revolve this problem
i have got this problem to carnt get the xda i to connect to my car blue tooth hands free kit it finds the kit but nothing gome on guy get ya thinking heads on n help :idea: to revolve this problem
Hi everyone,
well, I got the same problem :x with my XDA2, also called Qtek 2020, and Nokia carkit 112. It just does'nt work, even with BT tools. But I wonder how you get the icon screen while connecting to your Nokia carkit...cause mine is going straight back to the "Bluetooth connected devices" screen. I only got the icon screen, enabling the profile selection, while connecting to my Nokia 6310i phone.
Let's hope that HTC is gonna come up with Handsfree profile soon...
Regards to all, special ones to our OZ friends!! Mates, I really enjoyed living in Sydney, even if Italy is quite convenient as well.
Chris
Hello all,
I'm considering moving up to the XDA Exec; especially now that I see many contributors here have worked out how to get it running well.
However I suspect that, with its bigger size, using a bluetooth headset will be even more important. My experiences with my XDAII were that it was never quite reliable enough to use day-to-day (even after trying different bluetooth stacks etc.)
So what are your experiences:
- does it work well
- how about the voice dialling via bluetooth
- caller id on compatibale headsets work?
cheers,
Pete
I'd say it depends on your headset, but yes: The Exec handles my Bluetooth headset more reliably than my XDA2 did.
I've got a SonyEricsson HBH-65 that was occasionally great and occasionally infuriating with my XDA2, but it seems much happier with the Exec. It's not perfect since it's tough to interpret the various bleeps and boops that the headset gives out and understand what they mean, but I'm getting used to it. It'd be a lot easier if the headset makers could give us more than one button... :roll:
With my HBH-65 and my Exec I can receive calls and use voice dialling to make calls (provided I've configured the voice dial commands already). The voicedial bleeps are a bit quiet in the headset but trial and error might improve things.
Some people seem to have problems using voicedial if their Exec is closed and turned off, but I don't seem to have the same problem. The first press of the headset button switches the Exec on and then a second one gives me the voice prompt.
Hope this helps
I've tried a Bluespoon AX and a Plantronics Discovery 640 with my headset and while they both appear to work fine functionaly, the quality of the audio is bad. I've tested the same bluetooth devices with other phones and the quality is much better.
Does anyone else have this problem? I'm going to go into to O2 later today and see if they've had reports of this before. Maybe I have a dud device.
I have an Exec, a Jasjar *and* an MDA Pro the Exec is mine, the rest is Eval.) and the Exec and MDA pro handle BT Headset fine. The Jasjar however keeps dropping the connection between the device and the headset. Flashing the MDA Pro with the Jasjar ROM made that the Pro also started dropping the connection between device and headset.
Conclusion, something is flaky in the Jasjar Rom.
There are a number of posts relating to this dropping of connection in this forum.
G'day
I have had the Jabra BT800 for a few months and never used it as it was pointless with the XDA IIs, but it works perfectly with the JasJar. It even rings about half a second before the phone does and shows the callers number (pitty it doesnt show the name from the phones contacts).
I am happy i didnt sell the BT800, as now i can keep the JasJar closed in my pocket when i just need to answer the phone.
Paul
ive used a jabra bt250v no problems voice dial is much better and works fine but i havent found how to get the audiogaeway working any ideas anyone so i can get tomtom throught the headset
JJ and Jabra BT 800 work well and voice dial works very well. Have made 1.5 hours in the last two weeks and not dropped calls. When used inside a car or in a room the signal is okay but as soon as you use the Jabra BT800 and JJ outside the signal gets weaker.
Hi to all.
Have any of You experience with connecting TyTN to more sophisticated bt carkit. Mine connects perfectly to my simple motorola carkit but does not want to connect to Parrot 3100 at all.
Hi varden,
There are some issues with tytn an parrot CK connection. As it is discussed on this thread, Parrot is aware of the problem and say they are waiting for a tytn unit to test it and solve the problems.
http://www.parrot.biz/forums/english/viewtopic.php?id=2667
Regards.
Do You know of any other working carkit with an LCD and contacts importing?
My Audi BT carkit doesn't work with the TyTN,
It connects and stays connected for about 5 minutes, then it randomly disconnects and reconnects and sometimes just disables the BT on the TyTN :evil:
I have no troubles using my Lexus car kit for making calls, but I cannot for the life of me figure out how to transfer contacts from the TyTN to the car address book
Just tried my Orange SPV M3100 with my Audi A4 BT carkit, and it all appears to work fine so far.
To the Lexus guy, most in built car kits I have come accross have the ability to read the contacts off the SIM card. As this is a standard format, car manufactureres don't have to worry about accessing contacts from Symbian, Windows Mobile, Nokia etc etc etc. With my Audi, the first time it connects via Bluetooth, it reads all the contacts from the SIM card. (Note: if you already have a Bluetooth connection created, you will have to delete it and then re-create it to initiate the SIM download bit).
This maybe different on your Lexus, but the mechanism should be explained in your manuals somewhere. If not, Lexus dealers are reknowed for being very helpful, why not try them!
Markee
CK 3000?
Does anyone have any experience with the TyTN and the simpler CK 3000 kit?
I use my TyTN with a sony ericsson bluetooth car-kit. It works perfect at the moment. I didn't use it much yet, but it works very well. the TyTN connects much faster then my previous Eten M600
Does anybody have the Tytn work with a Lexus Bluetooth carkit?
If yes - is the phonebook transferred to the carkit?
Thank you
TyTN with Parrot RNB
Hello together,
I'm using the MDA Vario II together with a Parrot RNB. Paring, connecting and phone-book synchronising is working quite well. But I have problems with phoning. While synchronising I can't make a call. When I try I don't hear anything (no ring tone and no speech) and my MDA disconnects after some seconds.
After synchronising the phone handling is quite good. I can reach and make calls either with the RNB or with my MDA and the sound quality of my phone partner is very good. The big problem is, that my speech is muted every two seconds for about one second. So my partner has big problems to understand me.
On the RNB I have the latest firmware, which is about one year old and on my MDA I have the ROM Version: 1.21.111.3 and the Radio Version: 1.05.02.00
Does anyone have some hints for me to solve the problems?
Greetings Pudl
Phonebook transfer to Lexus now works
Finally managed to send contacts over to my LS430 from my Hermes (Cingular 8525).
How you ask?
WM6!
It has an updated bluetooth stack that now interoperates properly.
Finally.
@Mandingo,
How did you achieve this, i just picked up my RX350 and i already have WM6 on my Hermes, but i can only send 1 contact at a time to the car, and it's becoming painful, i wish there was some way i could select all contacts and then send via bluetooth?
if you go to http://www.jetwaremobile.com/ you can download their cab file, then install it and you can push all the contacts over in 1 go.
Paul
I have a BMW with bluetooth phone kit (official BMW!) and i couldn't use it with me Symbian phone... Now i have a TyTN and all works great
I stopped using sync on my TyTN with my CK3300. Instead I exported all my contacts from Outlook with the Parrot App, and pushed them over bluetooth to the kit.
You need to select the SonyEricsson K800 NO SYNC when pairing the TyTN so it doesn't sync. The advantages with this is that you can use the dual keyword (name then home/work/mobile) instead of the default sync that just puts all numbers in one long list.
Parrot CK3000
I am using a TyTn with a simply Parrot 3000. It works well. If you have a problem with it, reset the Parrot.
Hi everybody,
I completed some tests using my bluetooth car kit (Audi integrated BT MMI car kit). Here is what I saw :
With the original french ROM (1.18.256.2)
Outgoing calls
90% of the calls were interrupted during dialing or connection. The main problem was UMTS stability with the french mobile operator named SFR. After deactivating UMTS/3G and falling back to GSM, 80% of the calls were interrupted during the first minute of communication because of BT unstability.
Incoming calls
Impossible to take a call : half were immediatly interrupted, half were answered using the internal micro instead of the BT one.
With the JasJam ROM (1.20.305.3)
Outgoing calls
After deactivating UMTS/3G support all the calls are stable. Every thing is working fine and the Audi BT car kit works just fine !
Incoming calls
Still impossible to take a call : quite all are not well handled. BT is still unusable to take calls.
I don't think the BT car kit is the problem, because I am using it every day with a Qtek 8310 (Tornado) and both incoming and outgoing calls are well handled.
If you've got some experience, please share it. I am so disapointed that this marvelous TyTN cannot replace my Tornado, only because this "merdique" (<------ french romantic word ) bluetooth functionnality is not working ! :evil:
Arnaud.
Hi Arnaud,
I too have problems - see:
http://forum.xda-developers.com/viewtopic.php?t=61594
Paul
Im also having problems with carkit.
Jasjam and kjam just dont connect with my carkit (while they pair with it) but Jasjam and all nokia / samsung phones work perfectly well with it. Even Palm treo 650 works.
Is this a problem with iMate sets or with Windows Mobile 5.0?
I've had a friend who also has a TyTN which we tried in my kit and it didn't work. It seems that users with other variants (e.g. Orange) don't have this issue?
Further (non-technical) tests have shown that if you answer or make a call, you can get the audio by going into the call menu and choosing "Turn handsfree off". My uneducated guess here is that there is some issue with the headset feature on the TyTN and by doing this, it resets the headset profile and bingo!
It is a pain in the ar$e doing this for inbound calls, but for outbound it is manageable - you simply dial the number and whilst it is connecting, do the menu->Turn handsfree off workaround. Hopefully the new ROM will fix it - when it arrives!!
Hi All,
Just to put in my experience.
I have an Audi A4 with a Gen II car kit. As there is no handset holder for the TyTn I am using the Bluetooth function.
I have the Orange SPV M3100 variant, which works absolutley fine with the Audi Bluetooth, with one problem....
As I don't yet have a car charger, when the phone goes into sleep mode, it appears to disable bluetooh (I occasionally get a 'BT OFF' signal on the car display). Switching off bluetooth, then switching on again on the phone tends to kick it back into life where it stays live for another ten minutes or so until the phone dozes off again..
I have heard of a few people who have also diagnosed the problem as possbily the phone going to sleep to conserve battery, and solved the problem with an in car charger. I will report back when I have a charger.
Again, I do not suspect the Audi car kit as I have previoulsy used this (on Bluetooth) with a Nokia 6230 and MDA Vario, with no problems at all (the Vario was externally powered from the car).
Maybe you TyTn owners can flash to the Orange ROM ;-)
Same Scenario Different Cast
I have a Lexus GS with BT.... here's my Undesired results
actually, the only Problem i am having is very annoying.
If i receive or make a call after i pair with the Car kit, EVERY Thing is fine,
The sound quality is good, the response time is good (no Delay).
BUT after that call is ended, the BT itself on the jasjam TURNS off...
so i have to turn the BT on After EVERY Single Call (either made or received)
Is this Normal, I don't think so, but i had to ask
I have the Original Ship ROM Arabic version
My BMW handsfree works just fine with my TyTN. No issues other than an occasional BT off (loss of pairing). Interestingly, it's not sleep mode related since it usually works just fine in that mode. Generally, disabling Bt then re-enabling it re-establishes the connection then all is well. I have no issues making or receiving calls.
No doubt CarKit issues will be addressed when HTC releases their ROM update. Recent information tells me that this update is pretty much guaranteed to be an AKU3.0 variant. There's a tremendous amount of BT stack improvements in this AKU that should improve this as well as A2DP bluetooth issues.
.. No issues other than an occasional BT off (loss of pairing). ..
Interesting! I have the same issue with MTeoR.. I wonder if MteoR and TyTn are based on the same HTC device PLATFORM.
Updated my Parrot CK3100 to the newest version and things still don't work too well. When I start a call on the Parrot it takes around 20 seconds to start dialing on the phone, and when I receive a call I have to pick it up, place it on hold, and retrieve from hold to be able to hear the other side.
I wonder what/why they changed in the Bluetooth stack, it worked perfectly on my Wizard...
Renault Laguna II integrated BT kit
Works OK with my Laguna system except for the signal strength indicator. It appears that this information is not sent or translated onto the screen in the car.... Calls are fine though, and I noticed that the car rings immediately, the moment the phone does. Could be because the TyTN has the "turbo lag" explained in another thread tho
Cheers
rmorby said:
Works OK with my Laguna system except for the signal strength indicator. It appears that this information is not sent or translated onto the screen in the car.... Calls are fine though, and I noticed that the car rings immediately, the moment the phone does. Could be because the TyTN has the "turbo lag" explained in another thread tho
Cheers
Click to expand...
Click to collapse
Try installing Jetware mobile extender, that adds signal and battery bars as well as network name.
I enabled Remote SIM Acces in the Bluetooth Menu and now my contacts sync on my Audi Bluetooth Car kit with WM 6.1.
Hi
I have paired Motorola H670 bluetooth headset device and no problems with outgoing calls, however when somebody is calling and I try to anwer it, it always answers on in-phone speaker instead of bluetooth headset.
I don't know what to do, but it is essential to be able of answering phone via bluetooth headset.
Currently I have windows 6.5, however 6.1 had the same problem with answering calls. I am using S2U if it matter and HTC Home.
Any suggestions?