Hi I have noticed today
My text phone pad doesn't work? anyone know why this is? I had got used to it and now i cant get it loading!
What do i do?
This problem that you are experiencing with PhonePad is the same one we were experiencing with the Magician. The problem is that the SIP and the Today plugins share the some same resources. With a lot of Today Plugins (or an insulting one), you will not be able to change your SIP other than to Keyboard.
You can try disabling the Today Plugins one by one, trying to load the Phone Pad in between. That way you can find which is the insulting plug-in. Mine is the Resco Explorer plug-in. You can re-enable the insulting plugin once you load PhonePad and they will then work.#
Sometimes a soft reset and changing the SIP immediately after also solves the problem.
Dont know what the problem was but, its sorted.
without changing anything I just opened programs and tried to run the pad in there now it works well.
now just to try tomtom5 so far no one reported any problems a good thing!
OK it has gone again and it is not the today items and I have not installed anything yet,
any ideas what it could be or how i can track it?
Whats the phone pad anyway...
the pad is the like phone pad which comes up so you can enter text.
I have just reset the phone to factory standards and the pad works unit it starts to install stuff then it just stops.
I have removed all the stuff it will let me and still it wont work. I have to get this working...
Has no one else got this problem?
rom: 1.0.9.25wwe
OK this is odd I have removed all programs on the PPC and started nothing and it doesn't work, removed the sim and it does! OH! I need the sim.
oh and the JAMin runs much faster without the sim?? OK so as I do this I am performing a hard reset without the sim, the phone is clever its telling me there is no sim! "I know this!"
I am sure it is something to with a CAB file that installs when you first boot or after a hard reset. or it may be my sim? after all its working without my sim.
Ok hard reset done, without the sim it is working fine now time to put the sim in.............................................
OK its either the sim or the stupid text that tells me what area I am in. how do i turn the area notification off?
ok a way around it should you ever have this problem.
put the phone into flight mode and soft restart, with it still in flight mode load you sms or what ever and open the key pad, then turn off flight mode and you will see your key pad.
PS it will screw up after a soft reset so you will need to do the above again but a solution for the short term.
Must be your sim card...
My Jamin doesn't have this problem (Cingular)
Just traded Dopod 700 (Blue Angel) for the sleek and tiny Dopod 818 Pro. Keep hearing about this phonepad SIP, but don't seem to have one on my phone. I have the Traditional Chinese ROM, which is ok, but would love a phonepad... Any ideas what's up with it not being on the device?
Thanks,
Travis
Heya,
used to have this problem too until i read a solution from a thread here.
goto "HKEY_CURRENT_USER\ControlPanel\SIP" in registry
under "DefaulfIM"
Change this value to "{51A2CB38-154E-4C92-A625-A83871C99EC2}"
Thereafter everytime you soft reset, phonepad will load up automatically and it will function every time you need it to... hope this helps
thescum said:
Heya,
used to have this problem too until i read a solution from a thread here.
goto "HKEY_CURRENT_USER\ControlPanel\SIP" in registry
under "DefaulfIM"
Change this value to "{51A2CB38-154E-4C92-A625-A83871C99EC2}"
Thereafter everytime you soft reset, phonepad will load up automatically and it will function every time you need it to... hope this helps
Click to expand...
Click to collapse
FANTASTIC!! This worked great BUT i had to input it in lower case for it to work.
Related
Hi i cant seem to enable the vireless netowrk on my i-mate jasjar. It worked in the beginning but now it just blinks realy fast when i press the button to enable it.
The only thing i can think of is that i installed the extended rom thing from buzz...it was that cab file i found in the comments on his site.
pls can anybody help me with this?
Please help me ppl. I tryed reverting the settings for the extended rom and that did not help eather.
Please i really need som help here guys
I had my wifi stop working at one point for unknown reasons. Soft resetting didn't fix the problem. It did start working again after a hard reset. It was not doing any fast blink like you describe, so it may be that whatever your problem is has no relation to whatever my problem was. I don't know if you have tried hard reset, but in any event I'm hoping one of the wizards here will have better advice for you.
Hehe by fast blinking i mean when i press the "wifi" button in the wireless manager. It just blinks breafly to indicate that i pressed it..but it does not turn blue like its suposed to and it does not turn wifi on like its suposed to.
Had hoped i wouldnt have to do a hard reset as i have my device set up just perfectly now
So if anybody has some tips here ill try anything.
btw what is sddeamon? i had sevreral of thouse in the notification que and i remoced all but one. could this be the problem?
OK, now I know what you mean, and unfortunately my problem was different. It would presumably turn on (button would change color) but not connect with anything, including access point that was no problem before. And sorry again since I don't know what that sddaemon thing is for sure. It might be related to the voice dial function, but I'm really not sure. Hard reset is definitely a pain. I've made a little cheat sheet for myself with all my tweaks to get things set up again. But it's a pain anyway. Part of the cost of being on the bleeding edge with these wonderful little machines.
so true so true. But since it seems that nobody else has this problem im a bit afraid that there might be a hardware problem.
Well only way to fighure it out is to do a hard reset!. Is there any way to back up WM5 like there was in 2003?
well i have now preformed a hard reset and that did not work. I also installed the imate rom twice (installed arabic first LOL) and that did not good eather.
So i guess there is a hardware issue with the phone itself...
Any thoughts?
Hi All,
I have got my Qtek9100 since yesterday. I already upgrade to ROM 1.6.7.1 WWE. Today I just tried to have some basic lessons on my PPC. When I tried to change to "phone pad" input mode from "Input Selector" arrow, I failed. My PPC just stays in "Keyboard" mode. I can change to any other input mode, but "phone pad".
Please help
Hello,
I have had this problem and still suffer with it on my JAMin, the fault with mine is the sim compatibility with the rom.
try and start your phone without the sim if it works then the next step it put your phone into flight mode and do a soft rest, once the phone has started then switch off flight mode.
it should work
I don't think the Phone SIP (Soft Input Panel, used to enter text) has anything to do with the phone part?
I'm having the same problem with the new leaked AKU 2 ROM. I can't use the phone pad, and also it takes like 20 seconds when I click on the arrow to change the keypad.
Any ideas?
I have just noticed that "phone pad" pull out appearance is more or less occasionally. For instance yesterday, after soft reset I have got phone pad. Today I didn’t have it in the begging, but after some activities it appears again. So I cannot tell what the case is after all. The good news is that I don’t use it at all, so it is more like curiosity that real problem. 8)
I dont know if anyone can verify this but I had Phone pad working fine after a hard reset a week or so back. After the hard reset I did the reg tweaks for Glyph and the other one 4096 or whatever. After that it takes forever for the menu to pop up and then phone pad dosent come up when selected. Anyone else apply these tweaks?
Funny I also ran into the same problem just last week. Phone pad don't show anymore, and menu takes a long time to pull up. I thought it was the software "CE Star" which I installed, but looks like it's happening to everybody.
Hopefully somebody will find a solution soon. This is annoying.
Same problem here. No ROM update here though. I've seen the phone pad application before though. I did a hard reset a while back for something I can't remember now, but ever since then....no phone pad.
I can choose all the other options, but the phone pad stays in keyboard...
Please someone find the solution, the phone pad is essential to a true "one-hand" operation...
same for me...
always stays on keyboard, going into text messages, virtual keyboard always comes up and i cant change it from the input in settings... it stays on keyboard and keeps popping up. i dont need it, i got a pullout keyboard in that qtek 9100!!!!! please anyone?
I've got the same problem with my Atom. Has anyone already found the solution?
What worked for me is using registry wizard to change default input method to phonepad and soft reset and phonepad will be available - I think it stays available if you reset back to keyboard as default. You can use pocket tweak to do the same thing
Randomnly when I press the green phone button or select Phone from my Start menu, I do not get the keypad, instead I just get a black box on the screen. They keys are "on" the screen - ie I can dial a number by guessing where the keys should be displayed, but unfortunately this is no good!! Any suggestions?
I have a similar problem, sometimes I get nothing no phone pad, just the today screen. I did a soft reset and it works again try doing that and see what happens? Do you have any phone apps that might be confilcting with the OEM phone apps?
Yup, a soft reset fixes it. It occurs approx after 10times of using the phone (although I havent actually counted) after a soft reset
Which ROM's are you guys running? Is it Helmi's 1.1?
no, i am completely standard on a UK O2 Rom
using O2 standard ROM with radio 1.04.xx, I just got it though. So I'm still just trying to figure out the device before I start tweaking it. SuperCarl, I don't know what to tell you, I soft reset mine and all was fine. Do you have any dial-pad skins that you are using maybe?
Harry Tuttle said:
using O2 standard ROM with radio 1.04.xx, I just got it though. So I'm still just trying to figure out the device before I start tweaking it. SuperCarl, I don't know what to tell you, I soft reset mine and all was fine. Do you have any dial-pad skins that you are using maybe?
Click to expand...
Click to collapse
soft reset alleviates the problem, but it recurs.
I am not using a dial pad skin (unless one is bundled with o2)
I have a huge problem with my MDA compact III. The problem is, I have to hardreset my device almost everyday. Thats because all of a sudden the device acts strange and won't open almost every program. When I softreset the device then, the device won't pick u a signal. In stead of showing how strong the signal is, it diplays a !. Also after the softreset sms, mms or my mailaccount is deleted. I have never spoken anyone with the same problem or anyone with a solution. I only have Windows Live Messenger installed, but many people have and none of them have my problem so that doesn't seeme to cause this problem. It's really annoying and it's getting worse by the day. Yesterday I had to reset my device 3 times(!).. If anyone knows this problem or more important, knows a sollution, please share it with me cause i'm close to driving my car over my MDA
Tom
Are you doing an actual hard reset where you hold the two soft keys on either side of the chome wheel, then hit the sunken button on the left side with your stylus while holding the two soft keys and then confirming with the green talk key? If so, sounds like a hardware problem.
No not using the softkeys. I always perform a hardreset in settings menu, i don't know how it's called in english but in dutch is called 'opslag wissen'. Sometimes I get an error saying cold boot could not be completed blabla and then i have to confirm to hardreset.
Tom
Sounds like you are using the 'clear storage' option. Try the actual hard reset procedure and see if that fixes things...thats how I do it.
I just performed a hardreset using the the softkeys. I hope this will make a difference and solves my problem. If not, my MDA gets his first swimminglesson and I'll contact my insurancecompany.
I'll let you know it worked out. Thanks for you're help
Tomschayk said:
No not using the softkeys. I always perform a hardreset in settings menu, i don't know how it's called in english but in dutch is called 'opslag wissen'. Sometimes I get an error saying cold boot could not be completed blabla and then i have to confirm to hardreset.
Click to expand...
Click to collapse
As far as I know, this 'opslag wissen' is the equivalent of a hard reset. So it should not make any difference, unfortunately.
no it didn't make a difference. had to be hardreset allready. going over to plan b, allready filling the bathtub.
If you do teach it to swim, however, please post pictures.
OK, so i have a Treo Pro and I am running MD2 at 96dpi I have had this installed for over a week and today when I picked up my phone I couldnt get the dialer to come up. However, if I hold down the send key it will dial the person that is last in my history. I have hard reset the phone twice now and still cannot get the dialer to pop up, and it constantly notifies me that I have voicemails (at least twice a minute). What should I do? Do you think a dialer program would help out?
If you did a HARD reset and the dialer is not showing then there is something wrong with your device. If there is a software problem however then a SOFT reset might not fix it.
Try a real HARD reset to see if your problem is fixed.
Reset > Hold RED Button and follow the on-screen instructions.
Note: You will lose all data that's on your device!
[email protected] said:
OK, so i have a Treo Pro and I am running MD2 at 96dpi I have had this installed for over a week and today when I picked up my phone I couldnt get the dialer to come up. However, if I hold down the send key it will dial the person that is last in my history. I have hard reset the phone twice now and still cannot get the dialer to pop up, and it constantly notifies me that I have voicemails (at least twice a minute). What should I do? Do you think a dialer program would help out?
Click to expand...
Click to collapse
mine did that yesterday, a hard reset fixed it. Follow the directions in this thread
Problem Fixed!!! after HARDresetting a few times and eliminating programs one by one I have discovered that it was the updated res pack in the m2d for treo pro thread that caused the dialer issue so i just used the old pack an everthing works fine now. Thanks for everyones input.