Database Users

and what if someone (me) can not afford to break anything?

Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...

Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.

www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris

Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.

Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!

What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris

I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.

The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.

NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x

Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?

never got out of it

How to update ROM on O2 Orbit-solution

All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin

YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...

Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!

Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.

Works great on all versions.
Great support from the boys from emeicheck

Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!

Yes you must do it all.

HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?

REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!

Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.

towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye

Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....

KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.

O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks

I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message

Did you unlock with imei-check? What is your model ID ARTExxxx ?

Yes i did. My Model ID is ARTE100

Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.

Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me

Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX

HELP ME P3300 Does not upgrade to WM6 Cause Error 260

Hi to everybody.
I would want to set you a very strange problem that has happened to one friend of mine. He has installed the original ROM wm5 and he wants to pass to wm6, once connected the pda to the computer activesync unfortunately it tries to syncronize him but remains to syncronize to the endless (1° strangeness) one.
Later starting the official updating htc downloaded by the site, continuing with the instructions and reaching the prophetic moment in which the pda is disconnected by activesync and puts on in formality bootloader to adjourn from the prophetic error 260 that I have documented and I bring here you him:
Me being a little hacker and almost all knowing the methods to upgrade the ROM I have recommended him to try to put in formality bootloader to extract the content of the original file and to make to depart the file ROMUpdateUtility, but also them error 260. Not giving me for defeated I have tried the last method from me known, the updating from micro sd card.I have dictated him footstep footstep what had to do but not even this time of it to wanted to know to adjourn him (2° strangeness, doesn't know however if has correctly done all finding himself him in the Marche and me in Sicily ). I think that can treat more specifically him of the pc of the operating system, even if he has told me that it has the xp.
Now I put me in your hands, aspect suggestions on as to resolve.
I thank you in advance
And excuse me for mine bad bad..... English

To get your P3300 back to live
Don't worry if things goes wrong sometimes.
1.What you can do is maybe a good option if you have a P3300 without a
provider then you can better going
to the website of Htc register yourself (its free!) Then register
your model of your Htc Product.
Go to the Htc club. you will find your originale udate rom!!! This is also
to find it here.
2. There is a nother option.
copy your RUU_singned img to a sd card and put the sd card bac to
your P3300.
Start the bootloader by pressing the both key rec. and power
and hold em when your do a reset.
You will see a 3 color line on your screen then you will see
the install progres from your img.
wait and follow the instruction on that display.
I had also a problem a month ago but and this option by the sd card
did working fine for me.
Now I update the software and also the dial pad to vista look. That is
realy awesome!
It's working fine and do its job what this model has to do!
Succes and good luck!

PLEASE I need help! I have an htc p3300 and when I try to update it goes up to 3% and turns off. There isn't any rom that I haven't tried but noone worked . Is there anything I can do ? Thanks in advance

...
takes sd card out..
you done uspl.. if not.. click it in my signature..

please help me!atom cant hard reset but can flash rom!

my phone is o2 xda atom ,
there was a tag called device in the software taskmgr(included in attch),i found a dll called "SDHC_mainstorage...(i can't remember it exactly)",then i thought my sd was a no-sdhc card(2g transcend),i stopped it,but it seems some problem is occured,the busy cursor last for long ,and i soft reset device,then i found my device miss found the sd card.i open the taskmgr and want to restore the change,but i can not found the dll"sdhc_maiXXXX" ,seems it was replaced by a dll called"true_ffsXX(i also can't remember it exactly)",i run it and i found there was a dir called"storage" occured in "my mobile device"(use gsfinder).i'm very puzzled,and i want to restore everything with a soft reset,but this time my device can not reset successfully,it stoped in the first splash screen(in the second splash the screen will get a little dark,seems a signal that os is loaded?),this is the problem,now,the device can not boot successfully,can not hard reset(screen shows "device clean boot..."for long),however,it can boot to factory mode(use camera key+reset),also can upgrade rom successfully(i have upgrade several different rom,but prblm still exist).thats the all problems,could you give me some advise?i have try almost all methods but never can solve it....include flash with RUU,flash with sdcard(by files diskimg.nb0,eboot.img,extended.img),and flash different roms.even i use JTAG rewrite the bootloader in PXA272(from here http://wiki.xda-developers.com/index.php?pagename=DeadBoot )but still no use(error report here http://forum.xda-developers.com/showthread.php?p=2200731 ).what shall i do now?maybe the last method i can find is to flash my atom with sdcard with these files(dm.nb0 flash.img agent.mot mot.mot cpld.img assetinf.img extended.img mdoc.img)?problem is where can i find these files?i have search all the earth but no result,i don't know how to get these files,please give me some advice!very very thanks!and if you can read CHINESE you will find me here http://bbs.pdafans.com/thread-555068-1-1.html thanks to everyone replied!

wei2005yh said:
my phone is o2 xda atom ,
there was a tag called device in the software taskmgr(included in attch),i found a dll called "SDHC_mainstorage...(i can't remember it exactly)",then i thought my sd was a no-sdhc card(2g transcend),i stopped it,but it seems some problem is occured,the busy cursor last for long ,and i soft reset device,then i found my device miss found the sd card.i open the taskmgr and want to restore the change,but i can not found the dll"sdhc_maiXXXX" ,seems it was replaced by a dll called"true_ffsXX(i also can't remember it exactly)",i run it and i found there was a dir called"storage" occured in "my mobile device"(use gsfinder).i'm very puzzled,and i want to restore everything with a soft reset,but this time my device can not reset successfully,it stoped in the first splash screen(in the second splash the screen will get a little dark,seems a signal that os is loaded?),this is the problem,now,the device can not boot successfully,can not hard reset(screen shows "device clean boot..."for long),however,it can boot to factory mode(use camera key+reset),also can upgrade rom successfully(i have upgrade several different rom,but prblm still exist).thats the all problems,could you give me some advise?i have try almost all methods but never can solve it....include flash with RUU,flash with sdcard(by files diskimg.nb0,eboot.img,extended.img),and flash different roms.even i use JTAG rewrite the bootloader in PXA272(from here http://wiki.xda-developers.com/index.php?pagename=DeadBoot )but still no use(error report here http://forum.xda-developers.com/showthread.php?p=2200731 ).what shall i do now?maybe the last method i can find is to flash my atom with sdcard with these files(dm.nb0 flash.img agent.mot mot.mot cpld.img assetinf.img extended.img mdoc.img)?problem is where can i find these files?i have search all the earth but no result,i don't know how to get these files,please give me some advice!very very thanks!and if you can read CHINESE you will find me here http://bbs.pdafans.com/thread-555068-1-1.html thanks to everyone replied!
Click to expand...
Click to collapse
sorry i can't upload the file ,you can download here http://www.dotfred.net/TaskMgr.htm

Cant install most of the softwares !!!!!!!!!!

hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?

shadows of yesterday said:
hi all
i cant install alot of my favourite softwares such as SPB , i dont know why? can anyone tell me the reason plz?
Click to expand...
Click to collapse
can't help you or tell you the reason because you are not giving enough details about what you are trying to install, what is going wrong. How are you trying to install. Exe or .cab files. are you just getting error's during the installation

i tried to install .cab & .exe , but it says install unsuccessful, for example SPB & Battery status

mmmm
On what ?... is the cab on the phone or on the PC ???????

i tried both , but i couldnt

You have the HTC Touch Elf right? No cabs at all are instaling on your phone.
Possibiliites:
1. The cab files are being currupted either while you are downloading them or while you are sending them to your phone. FYI Cab files are to be installed via your phone not PC. Transfer the complete cab to phone and just click it to install - Do Not Unzip it. (A cab file looks like it is a zip file or a rar file wen it is on your PC but don't be fooled. it is a cab and does not need to be unzipped) you will only see a bunch of messy files and will just get confuzed. just place the cab on your phone and tap it with your stylus to initiate install
Exe's are to be installed via your PC to your phone through activsinc. place the exe on your desktop (Or wherever) and connect your phone to your PC using Activsinc. Then click the exe on your desktop and follow installation instructions - NOte you will have to still do some clicking on your phone to allow the installation.
2. you are not installing them properly and therfore follow instructions above.
3. your phone is currupt somehow (I don't see how) Try a hard reset and see if the programs will install after that. if not, you might want to return your phone for warranty (I am assuming you just got this phone and this is the first time you are trying to install something.
4. Maybe you have run out of room on your device to install any more applications (if you have been installing tons of other stuff successfully)
I have never gotten any errors installing cabs or exe's exept for when I was trying to install something that my phone did not support. (Not a valid WM application) or something like that.
Edit: You still are not give us much information - What type of error are you getting - What does your phone show/tell you?
Does it start to install and fail half way through? does it not start at all? does it install and the programs just do not run?
Tell us what program you are trying to install - what error you are getting and when you are getting it. Tell us the method you have used to install it etc....
If you want help you will have to provide us with as much information and detail as you can. Otherwise - Good Luck.
I will check back here regularly to see your response and try to help, but if you don't give us much more detail - no one will be able to help you.

Did you flashed your ROM recently?

it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)

shadows of yesterday said:
it start to install and fail half way through, but not all of the softwares , for example i cant install tcpmp,wm router , battery status , and alot of softwares , the error is always the same ( it start to install and fail half way through)
Click to expand...
Click to collapse
I don't know about battery status or wm router but TCPMP is an exe type installation. if you try to install this using your phone by putting the TCPMP installation on your phone and clicking to install, it won't work. You have to put the installation file on your computer, connect your device to your computer through activesinc. then click the TCPMP Installation on your desktop and follow instructions. Make sure you accept installation on your device when your device asks. The others may be the same

i did like that , but nothing changed , same message , install unsuccessful

shadows of yesterday said:
i did like that , but nothing changed , same message , install unsuccessful
Click to expand...
Click to collapse
Are you trying to install to your storage card or to device? Are you certain that you have enough storage space left?
Do you have any problems with Activsinc?
Have you tried downloading another copy of TCPMP - Maybe the copy you have is no good.

yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???

DuelMasterNG said:
Did you flashed your ROM recently?
Click to expand...
Click to collapse
You never answered the above question.
shadows of yesterday said:
yeh , i tried on both storage and device memory , i have 1.5 gb remaining on storage also
my active sync is working in perfect condition, i dont know wht happend , ok , is there anything that i can upgrade my phone ???
Click to expand...
Click to collapse
I don't know if I can help you with this problem. I have never had any problems installing anything onto my device even when the app wasn't compatible. usually still installed, just wouldn't run. I am still using official stock WM 6.0 rom that came on my device. (have not ever flashed a new ROM or Radio and don't know anything about that. If you did flash a new ROM or radio, that could be what is causing your problems and you may want to examine in the thread where you got your ROM or Radio from for answers or to see if anyone else is having the same difficulties. Perhaps PM the person who cooked the ROM. If you havn't flashed any new ROM or Radio, then maybe you changed something in your registry that you shouldn't have with a registry editor (just a thought - don't know if you have ever done this) or maybe you have an app on your phone that is causing conflict when trying to install other apps. You can always try a hard reset of your device (if you don't mind starting from scratch again customizing your device) and then try installing TCPMP and see if it works right after a hard reset. That would suggest either something was changed in your registry or that another app was causing conflict. Bit of a pain in the a## having to reinstall everything(unless you don't have much installed on your device) and still no guarantee that it will work. Before doing a hard reset, you might want to look into backing up your device. (I don't know anyting about backing up - what program to use or how much it can back up such as setting or such but you might want to check it out. Also make sure you sincronize your device with your computer prior to hard reset so that all your contacts, appointments etc... are up to date that way after a hard reset you can just syncronize your device again and get your contacts and appointments etc... back.
If anyone else has any suggestions here -- Please feel free to jump in. I know that I would be really annoyed not being able to install new apps to my device.
Good luck. I hope this gets figured out for you
Rod

i had the same problem, it was unbelievably frustrating, i had to restore my X1i to factory settings, that fixed the problem.

I think you should follow hotrod101's suggestion and do a hard reset. Its quite likely that your phone has malfunctioned or something. It's probably going to save you a lot of work in the long run. Or turn in your device in one of the HTC service centers as already stated. Don't forget to back all your stuff up first.
Good Luck.

thanx alot

you did not say whether your rom is original or coked as i met some problems with cocked roms in installing arabic based applications that was easily installed before flashing me device

Did you get things figured out - If so please share with the rest what you did to solve your problem, in case others are having similar problems. Did one of our suggestions help or did you find another solution?

same problem on my Touch Pro, seams to be common ... some say that it is due to the fixed number (50 installed programs) on the touch flue ... however, I have no more information of how did they got this result, or what is the registry of this issue???
I hope if someone help on this to avoide us the headache cused by hard reset, just thinking about it make me crazy.
even hard reset is not a solution.