Database Users

and what if someone (me) can not afford to break anything?

Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...

Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.

www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris

Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.

Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!

What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris

I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.

The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.

NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x

Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?

never got out of it

Dead - well Almost spv m5000

Hi,
I have been donated an Orange SPV m5000 to help with my disseration,
unfortunatly the rom as been tampered with or removed , well im lead to
believe. Due to this the phone no longer turns on, the only thing the handset will do is get to the bootloader screen.. after resetting the factory settings the handset still does not turn on. i think the handset therefore has no ROM files on it as I have tried to update using downloaded roms such as
Orange_SPV_M5000_v1.13.49_WWE
JASJAR_WWE_11353_137_10301
both say that they cannot communicate properly with the device...
using MaUpgradeUt_noID and following instruction posted the handset starts to update but then says that the updater is not compatable with the handset... any suggestions on how to load a new rom onto the handset would be greatly apprecieted or infact how to to fix this problem with limited technological knowlegde
thanks
cjh28

I'LL GIVE YOU 50 QUID FOR IT!!!!!!!!!!!!!
****, not even I'd be that cruel.
First off I'm 75% sure your device is fine.
ROM chips are nigh on impossible to remove without breaking the device and doubly nigh-on impossible to put back in! No one in their right mind would even concider doing such a rash thing, espcially with something that costs this much!
Now I think the problem is the same as the one I had - these ROM upgrades can contain many separate updates which are then kind of glued together - the problem is (and the problem you may have) is that they don't all match what is already in your PDA.
You therefore have to do one of 2 things:
1) Find an upgrade that DOES match - but then you'd have to know what's already in there & then find a match - unlikely.
2) Make them match with a bit of jiggery pokery. read THIS:
http://forum.xda-developers.com/viewtopic.php?t=40986
Seriously dude, good luck!
Andy

Still Dead well almost
Thanks for pointing me in the right direction, Ive been thru the directions on the link provided and still having no luck, am still getting a communications error - 101 from the update ... am thinkin ive got the incorrect orginal roms ... does any1 know where i can find the orginal roms for a UK Orange SPV m5000 ( am currently using a rom that gives me operator name as Qtek and WWE - the name of the file is on my orginal post)
any further help/guidance would be greatly appreciated....
Many thanks
cjh28

Flash It Again
1. Download This:
http://www.business.orange.co.uk/se...c=PaDPage&cid=1044130840493&mid=1044129390154
2. Make sure u are not using a USB Hub
3. Make sure u are using the proper USB Lead!!!
4. Install Active Sync 4.1 On your Computer (it needs the USB Driver Within this Program to communicate with your UNI.
5. If you have followed all the above correctly your SPV will flash
especially if it is going into bootloader mode.
If you get country error or comm error, hit update AGAIN, DO NOT Disconnect.

IF the upgrade wont go 100% thru, try upgrading the radio only by deleting all the .nbf files except the radio_.nbf then run MAUpgradeUt_NOID.exe

Up and Running finally .... thanks
Just to say that my SPV M5000 is now up and running.. thanks to Andy and comp.solutions for helping me out, just followed ur instructions took a few attempts but its all gd now
Many thanks
cjh28

Damn! Bang goes my 300 quid profit!
No, seriously dude, you don't know how much 'inner glow' that gives me to know that we have helped you recover what may have seemed a lost cause.
Well done! :wink:
Now you can spend the next month trying to figure out how to get things to work 'properly' on the bloody thing..... :lol: (i.e. guess what I've been trying to figure out for the last month: Bluetooth, WiFi, ActiveShyte, installing programs, discovering what a 'uni' is, what 'BT' is blah blah blah.... :roll: )
Andy

Fixed M5000
Glad to Help, Enjoy :wink:

02 xda exec upgrade to imate

I want to upgrade my 02 rom to the imate rom
which imate rom supports the aku2 patch, as o2 dont know when there going to release this support.

this is also my question, is it possible to use Imate Jasjar ROM for O2 Exec, and where i can get it , then i can use O2 software on new ROM ? Thank you.

YES!
I upgraded my O2 Exec to the new i-mate ROM and man.. it's like owning a completely different machine.
plenty of memory left ( i guess memory leaks were mostly fixed)
dazzling speed.
machine doesn't get stuck several times a day.
I am happy.
You have the official ROM. Search through it, I don't know in which thread I saw it, but the filename is: JASJAR_WWE_13076_164_10900_wwe_ship.zip
You should be able find it here using the search button.
Then you need to use a tool called maupgradeut_noid_645.exe
Also available here. It will allow to install the JASJAR ROM on O2 Exec. But I think your warrenty will voice.. unless you revert back to the O2 ROM which is downloadable from my-xda.com
MOBILER

Sorry again, i have this question, my XDA Exec is unlocked by deffault, after updated with the Imate ROM, is my Exec still unlocked ? Thank you.

yes your exec will still be unlocked. I have an exec with a Orange simcard and the latest imate rom. No problems.

hi,i have a xda exec from 02,i want to upgrade to a imate rom.where i can download this rom?,how can i read a manual to upgrade this rom?
thanks

ccoyote51 said:
hi,i have a xda exec from 02,i want to upgrade to a imate rom.where i can download this rom?,how can i read a manual to upgrade this rom?
thanks
Click to expand...
Click to collapse
From the link under i-mate in the wiki page for universal
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
go to ftp://ftp.clubimate.com/
Get the file JASJAR_WWE_13076_164_10900_wwe_ship.zip. About 64Mb. Unzip the file twice & you will get the readme.doc file for the instruction.

Any idea where i can find maupgradeut_noid_645.exe? Tried search and tried the ftp, no luck.

doody said:
Any idea where i can find maupgradeut_noid_645.exe? Tried search and tried the ftp, no luck.
Click to expand...
Click to collapse
I think I used this version when I upgraded O2 XDA Exec to JASJAR rom. Didn't run into any problems

Thanks for your replies and PMs, i-Mate rom is now installed

Also got fed up with waiting for O2 update and tonight loaded the imate rom and push email is working nicely . I will try and post some instructions tomorrow if I get chance.

what should be the final specs
mine are ROM 1.13.82 WWE
rom date 11/30/05
radio 1.09.00
protocol 42.42.P8
Ext ROM 1.13.188 WWE
ihave downloaded imate JASJAR_WWE_13076_164_10900_wwe_ship should I update with this my O2 EXEC
Please advise

Here is the process as promised. There isnt too much too it so hopefully you will be able to understand my ramblings.
You need the Imate JASJAR rom file which I downloaded from
ftp://xda:[email protected]/Universal/Shipped_Complete_Updates/
The file that you need is JASJAR_WWE_13076_164_10900_wwe_ship.zip.
First thing to do is to extract the files in the exe. There are two ways you could do this.
You can do this by running the exe file this will extract the files into a temporary directory in your profile.. for example c:\documents and settings\username\Local Settings\Temp, look for a very recently created directory in there, don’t ok the error message that you get when you run the exe as it will delete the temporary files. Just copy the files out of the temp directory somewhere else.
OR
You can use winrar to extract the files from the exe. Extract all the files into a single flat directory. Remove all directory structures so that you are left with just one directory containing all the files. (didnt try this way but I presume it will work)
Then download this file
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip
Extract the .exe in there to the same directory containing all your other files.
Then you need to make a small change to one of the text files. Look in the directory for
RUU.conf
Open it in notepad and add this line
[CHECKCEID_TYPE]=1
then save it
That’s about it…..
Usual wavers at this point.. upgrading flash may lead to dead device.. do so at your own risk… invalidate warranty…etc etc
Once you have plucked up the courage connect your device up to Active sync and run the exe file that was contained in the MaUpgradeUt_noID.zip file that you downloaded.
It seemed to take around 30 mins for the whole update process.
Im just going through adding my applications again and setting up the Vodafone GPRS configuration but so far seems fine and push email works nice and fast so I am pleased I have made the change.

Hi jwarbutron,
Thanks for the walkthrough, Im following your instructions and have now started the upgrade.
I got past the screen where it tells me my current version numbers and what the new versions will be. I said OK, go for it, and now its displaying the 'Checking the information on your device .. please wait ..' screen, I presume I just wait for 30 mins or so and the upgrade is complete? There isn't a progress bar or another screen Im supposed to see?
Cheers
Nas

hanks jwarbutron,
Your procedure works like a charm Thanks once again . Pl let me know how to get original #D phone pad interface

Unfortunately it didn't work for me, I left my phone plugged in for about 4 hours, it still just displayed the checking page, and now my phone wont start. Switching it on, I see some text in portrait mode saying usb at the top, and v1.00 at the bottom.
I'll dig around this forum to see if I can find a solution.
Nas

Third attempt looks to be good though! Got the progress bar, upgrading now... :lol:
Nas

Just updated last night, and good grief the imate ROM is so much better.
Its much smoother, quicker and generally a much more pleasant experience.
Very much recommended to anyone who who has the Exec.
Cheers
Rich

Well, my upgrade completed, but I still get the portrait page with USB at the top and v1.00 at the bottom. The upgrade said it had completed successfully, is there a step I have missed?
Cheers
Nas

Im starting the upgrade again to see if I missed anything, I have the screen with the progress bar, so I know its doing *something*.
While its going, any ideas what I might of missed?
Thanks
Nas

WM6 (Crossbow) for Typhoon + Flashing Guide! [Ready for download]

All you need:
http://www.geocities.com/gggbitonti

SORRY! fixing the link.. the site will be on line back WORKING! in 10 minutes!
thank you for segnalation
regards!

i followed the guide.
but when i turned the phone on for first time to load.
its loads slow and stays freezed...then i get an error
"Unknown SIM status.(Error 262144)
i think my radio rom maybe wrong.
if u know where to get a bin file..which i can upload via mtty1.42.exe
because i think my radio rom is old and i update to wm6 with old radio rom.
also it was a locked branded orange phone.
however before i proceeded with your tutorial i done the neseccary procedure such as regedit,,,super cid change and unlock sim
using spv services tools etc
so if you could help please i would much appreciate it..
because atm the phone is in operable and i would like to at least flash back to another rom or whateva....but it looks like i will have to do it through UI and mytt142.exe as these are the only things i can access via phone and pc.
thanks

...works fine with my sda music...only this horrible joysticbug

sandman: the .bin file for mTTY is on the last download link in the archive with WM6, here you can find mtty 1.42 to load the rom.. but to load the rom you need my SPL i share.. i don't know why it say you this sim problem rom.. the only tip i could give you is try to restart the procedure! my starting test was on a Typhoon WM5 updated.. but with the initial procedure you erase any old SPL... so, retry procedure step by step it work, i tested it 3 times before share and there are people who had success good luck!

...is there a way to solve this joystick-bug?

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
could my make this work for htc monet

It work good at 565 but has some problems at 575 585,because the joystick and drivers are different.

weikey said:
It work good at 565 but has some problems at 575 585,because the joystick and drivers are different.
Click to expand...
Click to collapse
yessss t-mobile SDA (imate sp3i) rom update bad error joystic
keyboard dll problems wm6 rom not using

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
Thank you so much I followed your instructions ang got a wm 6.0 typhoon ..its so cool dude...thxxx
but could be better I think if someone who know how to improve this wm 6.0 stuff...thxx

is there a way to application unlock in wm6
other than that it seems to work fine

works on imate sp3 now..

double blah

giuseppebitonti said:
All you need:
http://www.geocities.com/gggbitonti
Click to expand...
Click to collapse
Hi, thanks for the guide.
I am following the below steps in order to upgrade my untouched SPV C500.
Go to the folder where you extracted files from TyphoonNBFTools_0.3_SPL1010064_SPVServices.zip and run TyphoonNBFTools.exe
In menu select File > Open NBF... and load SPL1010064.nbf.
Right click on SPL1010064.nbf and select 'Emergency Flash' in popup menu.
Click to expand...
Click to collapse
Now, after loading SPL1010064.nbf, I am unable to proceed further. The reason is there is no SPL1010064.nbf visible there, so that I can right-click it... Could you please advise?

Never mind about previous post, I now got it to work. Looks fantastic so far, thanks a lot!
My mistake was I hadn't application unlocked the phone before.
This phone had been in a drawer for 2 years, and I believe it will again be in my hands, at least on week-ends.

Mega GREAT WORK !!!
It runs smooth on my dutch SPV C500
Who would have thought that WM6 on C500..
grtz!

didnt work for me. failed at first step with reliability test failed. Perhaps its cause i'm using vista.

I Have Application And Sim Unlocked My Phone But I Do Not Know If I Have To Do Something With The Cid Tool

FLORINOX, you have to SuperCID your phone

Hi to all...
I have flashed wm6 to my SPV C500 but my miniSD card is not working now...
???
EDIT:
I try other one and everything is ok....

P800 rom flashing problem

I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.

Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem

mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)

Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse

mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!

Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse

mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?

Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse

mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.

Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility

mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.

I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.

Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards