I'm getting this annoying cprog.exe error several reboots after installing wm5. Does anyone else get it? How did you fix it?
I'd really really appreciate it if anyone could maybe send me their version of the cprog.exe file that they are using with no problem. (WM5)
Thanks, Peter
The ONLY way I know how to "fix" it, is to reinstall WM5 from scratch. After that, don't mess with the HKEYLOCALMACHINE/security/policies/policies/00001001 or 00001005
suggested settings for app unlocking. (Which is how I got that error on mine).
Related
Hey all,
I am trying to get my app to tell WM2003SE to reload / refresh the wavedev.dll so that it loads a new version I have copied to the device, without having to perform a soft reset.
I have done a fair bit of searching around and can't find any way of doing this, does anyone know how I could go about it??
Cheers
Anyone got any ideas on this please ? even if its just to confirm that its not possible to do!
Cheers
Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!
Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.
Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!
I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one
really! which software could i use to reboot the phone??
also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?
yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.
What software did you use or could i use to reboot my ppc chuckchuck?
Hi,
I have a cingular 8525 with the default cingular ROM ( will change it later want to wait a litle while)
I am trying to install a Cab and i get this notification:
the installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions
I know this is a simple registry hack and i seen a couple but I have not seen anything specific to hermes.
Please give me a link to directions
Thank You
Here... Install this CAB to the phone
This did not help
I installed the Remove Security Cab and it installed with no problem, but when i try to install: CommButton-Toggle-Vibrate-Fix.CAB
I still get the same notification.
Thanks
Did more searching still cant solve it
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
medmenz said:
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
Click to expand...
Click to collapse
Purely on the point of running processes - these will not show up in programmes in memory (except in very broad terms). An application such as sktools will show running processes.
(I am not saying this will solve your problem though)
Mike
ok i will try getting a prog and stoping more stuff to see if i can install?
Any other sugestions?
Tried using SKtools to stop everyhing possible still cant install the CommButton-Toggle-Vibrate-Fix.CAB
Is there anyone out there that knows how to fix this problem???
Please Help
thanks
Is there a way maybe to instead of installing this cab file to do it manualy??
Can I somehow modify registry to do the same as this cab is doing?
thanks
As a general rule, if I have an "unstoppable" process, I power cycle the phone and then execute the cab without opening ANYTHING else (like the comm manager in this case). Give it a shot.
I just tried that turning it off and on and trying to install, also doing soft reset and trying to install. Nothing works as soon as I click on it in a second i get "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Please tell me what else I can try??
Finaly got what I wanted
I never got the stupid cab to install, but I found a different cab which let you assign vibrate to anything ( http://www.8525software.com/)utilities so when i hold PTT button it switches to Vibrate
Thanks for all that tried to help me.
hi. i installed got an application called "touch.response." after a few minutes on installing, standard protocol, it restarted. upon restarting, a pop up said, "registry error" it had something to do with GWE. and then after which, my R3 panel cant be opened.
can anybody kind enough to help me out?
do i need to hard reset again? or just edit the registry out? if yes, then how?
btw, ive installed the r3 panel yesterday, and it worked pretty well. the error happened when i finished installing this touch.response application.
i hope someone does.
All of a sudden I can't update the stock information. I get this message "CONNECTION ERROR. There was a connection error while attempting to download stock data. Retry? Yes/No". It doesn't matter how the phone is configured or whether I initiate the update or the application does so automatically. I googled the message and found that some folks had the same trouble with the Weather application. The Solution was a registry tweak.
I haven't tried a hard reset yet. Since I don't know what the problem is or what caused it, I am reluctant. Also I hate to tweak the registry without specific information about what to change and how.
Can anybody help me with this?
Thanks in advance.
I forgot to mention that I upgraded my Rom from 1.07 to 1.36. Yesterday. I'm not so sure that was smart.