Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!
Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.
Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!
I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one
really! which software could i use to reboot the phone??
also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?
yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.
What software did you use or could i use to reboot my ppc chuckchuck?
Related
I have just installed the new English ROM on my JASJAR, without any problems. However, when re-installing all my apps, WM5 asks me whether I want to allow the unsigned app from installing for everything.
Can somebody please tell me where to find a registry setting to disable this, otherwise I am going to be crazy by the end of the day!
:roll:
[HKLM\Secutiry\Policies\Policies]
Change value 0000101a from 0 to 1
Do a soft reset.
Thank you very much
Now that installing Calligrapher 8.0 to my SD card caused the phone to refuse to boot, I'm going to have to start all over again ... :x
This hack also solves the "VGA Brute force not working after the update" problem...
I have received a .cab file patch (self extract) to install it directly into the ppc device, but I am getting regularly the following message: Installation was unsuccessful, the program or setting cannot be installed because it does not have sufficient system permission. I have tried every possible solution on the web without success. Has anybody experienced such an issue? or is there a way to delete every possible security or protection key in the file.
Any help is highly appreciated, thanks
Can you upload the .cab?
Your problem is not with the cab. Your device is application locked so only cabs that are signed by a trusted certificate can alter system settings.
If you look in the WiKi or at least tell us what phone you have we might tell you how to unlock it so you can install your cab.
I have an eten M700 with WW6 onboard, and the file that I want to install is BT.CAB patch. Since the upgrade to WW6 every file issued by e-ten corp has to passe through security certificate check. Now I do believe that you are right about the fact that this the device is application locked .
So, how can I unlock this device to be able to install .cab files? Any help please, I need this file.
Thanks for help
Did you try installing this cap directly after a softreset? Could be that some process is running that should be used by the CAB. I had exactly the same message when I was trying to install a comm manger while the old comm manager was running.
Yes I did, I have tried every possible solutions such as Hard reset, Soft reset, installed without any soft running on the background. It is a strange issue, I' ve this file from eten corp support in order to help me with the upgrade of the MS BT stack. The ww6 that I have on board is legall with imei and a key code, Any other sollution such as hacking the .cab file? thanks for assistance
Hi,
I have a cingular 8525 with the default cingular ROM ( will change it later want to wait a litle while)
I am trying to install a Cab and i get this notification:
the installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions
I know this is a simple registry hack and i seen a couple but I have not seen anything specific to hermes.
Please give me a link to directions
Thank You
Here... Install this CAB to the phone
This did not help
I installed the Remove Security Cab and it installed with no problem, but when i try to install: CommButton-Toggle-Vibrate-Fix.CAB
I still get the same notification.
Thanks
Did more searching still cant solve it
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
medmenz said:
I read some more posts and found that making sure processes are not running might solve the problem.
I went to memory and stoped all programs and I sitll can't install the: CommButton-Toggle-Vibrate-Fix.CAB
Are there like system processes which are not showing up in memory - running programs ? Maybe I need to get into those and stop them?
Any other sugestions?
Please point me into the right direction.
Thank You
Click to expand...
Click to collapse
Purely on the point of running processes - these will not show up in programmes in memory (except in very broad terms). An application such as sktools will show running processes.
(I am not saying this will solve your problem though)
Mike
ok i will try getting a prog and stoping more stuff to see if i can install?
Any other sugestions?
Tried using SKtools to stop everyhing possible still cant install the CommButton-Toggle-Vibrate-Fix.CAB
Is there anyone out there that knows how to fix this problem???
Please Help
thanks
Is there a way maybe to instead of installing this cab file to do it manualy??
Can I somehow modify registry to do the same as this cab is doing?
thanks
As a general rule, if I have an "unstoppable" process, I power cycle the phone and then execute the cab without opening ANYTHING else (like the comm manager in this case). Give it a shot.
I just tried that turning it off and on and trying to install, also doing soft reset and trying to install. Nothing works as soon as I click on it in a second i get "Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions."
Please tell me what else I can try??
Finaly got what I wanted
I never got the stupid cab to install, but I found a different cab which let you assign vibrate to anything ( http://www.8525software.com/)utilities so when i hold PTT button it switches to Vibrate
Thanks for all that tried to help me.
When you do a factory format, it installs the windows mobile, then the phone starts normally and locks for a bit and starts installing the SE programs. Is there a way to halt the automatic initial installation of these programs ? I just want to see whether my phone will be faster and crash less if none of these initial programs were installed on top of win mo. oh yeah, I was hoping to do this without changing the original rom installed. any idea ?
EDIT: found my answer just hit the reset button when it wants to do the installation.
EDIT2: NO, that doesn't work, read post #3. Still looking for a way to do it.
so how is it? any good?
i take it you dont have any pannels and its just a standard win mo device and how is the speed?
I've just tried that method and it doesn't work. I can't believe some people would just post you solutions that they have never tried -_- (I read this solution in another thread and then posted it in my edit).
Anyways, anyone knows of another way to do it ? and have tried it?
do you know HOW the initial setup works? what registry keys or files are used to control the setup? And where are the cab-files located after hard reset? that might offer some possibilities.
a simple soft-reset before the setup launches is not enough, after the reset it is lauched again. After the setup is complete, it is NOT launched again, so there must be some reg-key or file, that is set at the end of the initial setup. if you can set this manualy, it may stop the setup.
another way might be to remove the cabs completely, so they cant be executed.
the only working way I KNOW is to reflash the rom completely. that works
I dont like this way because its kind of risky and there may be problems with the warranty. But i am sure, you have to modify the flash-rom-content anyway to stop the setup. And i like the branding-stuff even less
I don't mind reflashing it, but I don't have the expertise.
I just wish someone would release a clean lite rom and let us install the cabs separately, without any modifications (so no registry tweaks or anything).
Hello,
My phone has 4 number security code you have to enter when the phone's being unlocked(did in settings, default winmo lock but HTC made an unlocking skin on it).
I've taken out a battery while the phone was on, then turned it back again in 3 hours. I move the unlock image, and as usual dialpad appears asking for security code. I enter as I usually do and it says INVALID CODE. I'm like - WTF? Tried again, nothing. Tried dozens of times, nothing. Reboot doesn't help. Now it even stopped saying INVALID CODE, when you press the unlock button it doesn't do anything.
I had the "lock" feature working fine for weeks.
QUESTION: What to do(without hardreset)? Phone is set to sync when USB connected, Windows Mobile Device Centre says unlock your phone first before sync. I can't do anything, can't make call(i can receive it), can't check messages or anything, i can't unlock it ffs! Help please, any ideas are welcome
you aren't alone,happened to quite a few.
did you recently install swype 3.9?(there are other reasons)
i've not seen anyone get out without hard resetting.
i have miri rom with swype pre installed
maybe there's a way to upload a file to storage card that will change some registry keys? problem will be how to run it
Sallcho said:
i have miri rom with swype pre installed
maybe there's a way to upload a file to storage card that will change some registry keys? problem will be how to run it
Click to expand...
Click to collapse
About the only thing I can think of is if you were able to find a way to put something in the \windows\startup folder that fixed it - but like someone here already said - odds are you're going to have to do a hard-reset.
@
It happened to me awhile back...i tried to find a way but didnt manage to find it, i had to hard reset..