No cmarea software - PDA2, XDA IIi, 2020i Software Upgrading

I have recently acquired an XDA11 could with no camera files on it is there a camera software which I could download to the XDA11

have you tried a hard reset ......?
i had the same problems on mms settings but on making a hard reset the missing mms menus returned....
for hard reset one has to press simultanously the top power button together with the reset inlet (with the phone pen )on the bottom of the device....as indicated on the manual

have you tried a hard reset ......?
i had the same problems on mms settings but on making a hard reset the missing mms menus returned....
for hard reset one has to press simultanously the top power button together with the reset inlet (with the phone pen )on the bottom of the device....as indicated on the manual

Related

Problem Hard Reset

The techical document says hard resetower + reset.
But it work like a soft reset!
How is it possible?
bye
Read Your Manual The Proecedure is more deficult. You will find it in Your Documentation.
To perform a hard reset
• Press and hold both SOFT KEYS shown enclosed by circles in the picture below. Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the left side of your device. Press either 0 to restore to factory default or X to exit the hard reset process. reset button

Can't get my K-Jam to hard reset

Hi everybody,
I just can't seem to reset my K-Jam. I tried it a dozen times but it still is a soft reset. Ok before everybody get's angry: I know how to hard reset (hold the two side top buttons and press the reset button). I tried it in different timings like first holding down the two side top buttons then pressing the resetbutton and holding it for almost a minute. Or first pressing and holding the reset button and then the two buttons but it is always a soft reset.
I guess it is a soft reset because I don't get the calibrate screen thing.
Any tips here because I want to get rid of the slowdowns from the virusprogram....?
Wouter
Hi,
I had the same problem. Theres a facility in settings called 'Clear Storage'
start>settings>system>'Clear Storage'
this actually does a hard re-set.
Thanks Webster,
I didn't think of that one! That did the trick!
Wouter
Hold down the Comm Button and Voice Button continuously while tapping the reset hole.
As long as you keep holding down the two buttons, the screen will go black and soon prompt you to hit Send to hard-reset (wipe the unit), or any other key to continue with a soft-reset (reboot).
Thanks Beyondthetech,
I'll try that next time when I need it :wink: .
Great blog you have! Has been very useful in making up my mind.
I'll install TT 5 later now I know how it can be done. :lol:
Wouter
Just a small update
Just to let you guys now. I finally found out the proper way to hardreset.
The trick is not to let go of the Communications and Voice Command button until you have stopped pressing the soft reset hole. Just wait with releasing the two buttons until there is a message on the screen asking you to press the Sent key to hard reset.
Another funny thing is that you can restore a backup (made with Sunny Backup) on another K-Jam device. It still runs. This came in handy because I exchanged mine for another because of some hardware problems.
Wouter
Which one is the "Sent key".
the telephone "call" key (green handset) (left side)

How do i Soft-Reset?

I just got my Orange SPV M5000 (Universal)... but there arent any icons or shortcuts for me to soft reset the phone.
Even when i press the power button, it just turns the screen off and back on. Even when i hold the power button for long, it still doesnt soft reset.
Can someone help?
Have you tried poking the soft reset button, just next to the USB port on the back?
Or try VJEschaton.
V
thanks, i thought the reset hole in the back next to the usb deletes all my personal data, didnt know it was soft reset. Thank VJ

WM5 Password Forgotten

Hi, a helpfull friend has set the WM5 password to strong alphanumeric and has forgotten it,or just wont tell me what it is. Can anyone tell me, how can I get around this to get MDA Vario working again?
Many thanks
I think a hard reset may fix.
But I am not to sure.
I have tried that, device is still coming up with password request.
All I can think of is flashing it with a new ROM but if it goes bad it could kill the device and I am not sure it would remove it but in theory it should. Other members may have some hacks to fix it.
A hard reset will definitely remove the password, maybe you are just soft resetting the device.
I have tried as says in manual many times, it comes back up with the password screen every time.
I can only try it with MDA:
Turned off
Turned on with password screen illuminated
Manual says:
88 Managing Your MDA Vario
To perform a hard reset
1. Press and hold the Comm Manager button and Voice Command button on
the device.
2. Keep the two buttons pressed, and at the same time, use the stylus to lightly
press and hold the RESET button.
RESET button
Voice Command button
Comm Manager button
I have tried it with MDA:
turned off
turned on showing password screen
Sounds like you are doing the reset wrong....
Hard resets are awkward - hold in the two top side buttons, press the reset and keep holding the top two buttons after you have removed the stylus from the reset hole. About four seconds should do it.
Hope that helps.
you'll know if you got it because you'll get a black screen with white lettering that says "press send to format" or the like
otherwise its just a soft reset. On an older ipaq I had, if I had a password it would ask on teh PC everytime I synched. This was with PPC 2003. I'm not sure if you'll still have a problem when you try to sync your data though.
Good luck.
Bilbo_28 & others - You were right, I was not doing a hard reset properly and getting only the soft reset.
It seems after doing it a few times, that the hard reset instructions in the manual should read something like:
hold in the two top side buttons, both the send and receive buttons leds should come on and stay lit.
Insert the stylus in the reset hole and observe both send and receive buttons extinguish
remove the stylus from the reset hole and keep holding the two top side buttons until:
The screen goes black and the following message appears:
Press send to restore
factory default,
Other keys to quit
Release the top two side buttons
Then press SEND to restore factory default
or press any other key to abort hard reset
I think an e-mail to T-Mobile telling them to update the manual would not go amiss !!
Many thanks for your assistance.
Thankz man
hey thankz man really got a great relief
Wow. I was doing the hard reset wrong. I had the same password problem. But now its stuck on the "align screen" menu wth? It moves the cursor around the screen and yet it comes back to the menu. I've run through it at least 10 times now

My Herald won't Hard Reset!

Help guys,
I've read the manual, but i am unable to HARD RESET my HTC Herald, I always SOFT RESET the phone because I have software applications problems - but I want to do a full hard reset, hoping it fixes the phone - (the SOFT RESET doesnt work).
I know you're supposed to hold the reset button down with your stylus after holding the two soft keys, but the moment I touch the Reset button with my stylus it immediatly soft resets...
Any ways to get around this?
you should be pressing the reset button WHILE holding the two soft keys. Make sure you keep holding them. The hard reset confirmation screen won't appear until you release them though
fzzyrn said:
you should be pressing the reset button WHILE holding the two soft keys. Make sure you keep holding them. The hard reset confirmation screen won't appear until you release them though
Click to expand...
Click to collapse
witch keys are the soft keys
On my Herald one only needs to press the two soft-keys, NOT the reset button on start up. In conclusion, 1. turn off device 2. turn on device and directly press the two soft-keys. By doing this at least I get some text on the screen and that I should press send to do a hard reset.

Categories

Resources