Related
I would like to ask,how can I connect to AS via BT,when I tap to Tools>Connect via BT... it ignores me. It does absolutely nothing. While attempting to connect via IrDA,it starts to connecting. The same thing should do also BT. Once,maybe 1 month ago it worked fine. Since one week ago,when I've changed the Radio stack I couldn't connect. Before was all allright. Any Ideas? Please.
hey bro
since ur running magneto on ur himalaya,it should be easy...
broadcom bluetouth stack ufortunatlydon't run on magneto ,but still M$ blutouth one will synchronize...
now u have to do the following:
1-uninstall every bluetooth software from ur pc(if u have intalled the ones that comes in the cd),restart,put bluetouth into usb,and let winxp sp2 identifies it(remember,only win xp drivers,no softwares).
2-go to control pannel in ur pc/bluetouth devices/com ports,and see wich com port ur blutouth is using,then from the options tab,select the turn discovery on.
3-go to active synchronization 4.0/file/connection settings,disselect allow USB connections,select allow connections to one of the following:,and put the com port u already checked in 2,and put automatic in the window below.u may need to restart ur pc.
4-now,pair ur pc and ur himalaya,u must see that ur PC supports active synchronization,then select/check it.(if u do not see,from ur himalaya,once paired,that ur pc supports active sync and checked it,u will not be able to sync).note that u may also need to restart ur pocket PC.
5-finally,go to ur pocket PC/active synchronization/connect via bluetouth,the port will open....ur now connected. :wink:
oh by hte way,the same procedures work if u have 2003se with bluetouth stack by widcom,just don't open active sync on ur himalaya before going to bt stack/bluetouth manger(that's the blue blutouth icon with red star in the buttom of ur screen)/active sync via blutouth(i guess,i don't have SE anymore),u will see ur PC with active sync option,then just synchronize :wink:
hope i've helped..
RAGO :lol:
...
Well... All I have with my BT stack at the PC's side is correct. At the PPC side it is also correct adjusted. Now,in the 5th step you wrote:
'...go to ur pocket PC/active synchronization/connect via bluetouth,the port will open....'.
This is the problem: It should open the port,BUT it does absolutely nothing... Just the 'Tools' roll-up menu is disappeared. While trying to connect via IrDA,the port starts to connecting. BUT Bluetooth doesn't it. Why?
hi
have u tried hard reset,if u have and the problem persists,try flashing.....the procedures should work unless there's some kind of problem in ur device(most probably software issue),it should be solved with a hard reset or in the worst a flash...
tell me the news,my friend...i wish i could have helped
RAGO :lol:
...
As I wrote in my 1st post:I have reflashed he Radio stack and therefore I have performed a hard-reset. The ROM Image is the same as before when it worked. Don't thing,that the Radio stack is the reason why...
all i can tell u my friend is i was using 2.06 WWE with Radio 1.18 on my MDA2,and my active sync over bluetouth worked like a charm.....
try changing the radio version(though u didn't mention wich version u're using)...
good luck
...
ROM:2.06(Diamond)
Radio:1.18
Well...The Radio version is 1.18,but I have 2 different versions..1st is in the package of Diamond ROM 1.2 and the 2nd one is from the package 2.20CHS Translated. The Chinese is much faster! even they are the same versions.
when i get home,i'm gonna reflash my MDAII,with 2.06(am running on magneto :wink: ),i'm gonna try everything,and tell u what's happening in details :wink: ...
so...later bro :wink:
RAGO :lol:
????????????
Well!!!!! You are bored at home? It takes a long time after all... Or do you have MDA2 only for experiments? Wau. Allright,as you wish. I will be grateful. If you have a choice,then flash-in the same images as me(ROM 2.06 and Radio from 2.20CHS). Thanx.
Can anyone here!!!!!?
Can anyonew explain how to active sync via BT in XDA2s having a Widcom stack and XP with service pack2..... :roll: :roll:
RAGOv said:
hey bro
since ur running magneto on ur himalaya,it should be easy...
broadcom bluetouth stack ufortunatlydon't run on magneto ,but still M$ blutouth one will synchronize...
now u have to do the following:
1-uninstall every bluetooth software from ur pc(if u have intalled the ones that comes in the cd),restart,put bluetouth into usb,and let winxp sp2 identifies it(remember,only win xp drivers,no softwares).
2-go to control pannel in ur pc/bluetouth devices/com ports,and see wich com port ur blutouth is using,then from the options tab,select the turn discovery on.
3-go to active synchronization 4.0/file/connection settings,disselect allow USB connections,select allow connections to one of the following:,and put the com port u already checked in 2,and put automatic in the window below.u may need to restart ur pc.
4-now,pair ur pc and ur himalaya,u must see that ur PC supports active synchronization,then select/check it.(if u do not see,from ur himalaya,once paired,that ur pc supports active sync and checked it,u will not be able to sync).note that u may also need to restart ur pocket PC.
5-finally,go to ur pocket PC/active synchronization/connect via bluetouth,the port will open....ur now connected. :wink:
oh by hte way,the same procedures work if u have 2003se with bluetouth stack by widcom,just don't open active sync on ur himalaya before going to bt stack/bluetouth manger(that's the blue blutouth icon with red star in the buttom of ur screen)/active sync via blutouth(i guess,i don't have SE anymore),u will see ur PC with active sync option,then just synchronize :wink:
hope i've helped..
RAGO :lol:
Click to expand...
Click to collapse
I have xda II and activesync 4.0 installed in my machine.
I am not able to find my bluetooth serial port in activesync connection.
actually by installing and uninstalling bluetooth software many time. My ports are com 25 and com 26. I just come to know from activesync help that it will not support if port no. is higher than 20.
so can anybody please help me how to create new port which is with less no. below 20.
:?:
Hi Man i have Your same problem with i-mate Jam iam realy need a solve
If You reach it please told Us Thank Youuuuuuuu
Solution
I've found that...
@PC: You need to create an BT serial port in your services(COMx). Then go to the connection settings in AS and check the "Allow connection to one of the following:" option and choose this COMx.
@PPC: Pair your device with PC. You should see the AS service in a list of services of your PC. Enable this option and tap Finish.
Now you should be able to connect via BT.
yea this mayb a noob question but,
How do you install activsync again on ppc
i mean i have it on there but it keeps crapping up. sometimes the bluetooth activsync works. sometimes it doesnt work at all. and sometimes it works fine.
i dont wanna have to hard reset.. again! (that ws my problem wen activsyncing via bluetooth) surely there is an easier way!
So is there a download or something for activsync for ppc (XDAII, windows version 2003)
thx in advance
activesync is build into the rom and cant be installed
ok thx... so there is no way? at all? ooo... i spose i cn reinstall it.... o i love my xda2(!)
i have no problems with mine
using bluetooth tools
the latest activesync
sure sometimes when i turn bluetooth on and try to connect
before it's ready it fail but then i just say connect again and it's all good
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
relax man!go to settings-connections-usb to pc and NO enable advanced network functionality
vincent85 said:
Hi All,
I need help urgent. My dopod can't syn with Pc after i successfully upgraded to ausdim's Rom! Right now,i can't install softwares, can't connect with pc. I want to use other Rom but since there is no connection so i can't do anything.
Already try every possible ways(disable firewall,Hard reset,Uninstall/reinstall Active Syn4.5, tried with activesyn 4.2,Retard the Pc....) But unsuccessful...
Drivers is all good as there is no yellow "!" mark in the Device Manager. (Yes, i can syn my HP 2490 WM5 with PC)
I think the problem is the Rom itself.
Please help me, I do not wish to bring it to repair center as it too far away from my house.
Click to expand...
Click to collapse
TRY FIRST S_WIND...
Don't worry ! Rom and device are ok!
Have you tried to make an Hard reset? If you don't , try now and let us know.
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
have you tried restarting your PC??
vincent85 said:
I tried both ways you mentioned (hard reset, and "go to settings-connections-usb to pc and NO enable advanced network functionality")
When i plug the usb cable in, there is nothing happen However there is yellow light indicate that the device is charging.....
Click to expand...
Click to collapse
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
imdantes said:
Go to your pc...click on active sync icon with right key , go to connection settings and flag usb connection.let us know
Click to expand...
Click to collapse
Done, still the same, no response...
vincent85 said:
Yes, i restarded my PC after i Re-install Activesyn 4.5....
And i did reflash (via Mini Sd card method) the device to another rom (PDAVIET) but problem is still there...
I tried to syn with my other 2 laptop as well but both of them don't make any connection....
Very frustrating...
Done, still the same, no response...
Click to expand...
Click to collapse
Probably during the update procedure some files have corrupted , please wait , i search solution...
Download this program : http://wiki.xda-developers.com/uploads/mtty.exe ,
DISABLE USB PORT FROM ACTIVESYNC, PUT DEVICE IN BOOTLOADER AND START MTTY , NO SELECT COM , AT THE END OF COM MENU , YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Now , remember to reable usb connection in activeSync and try synchronisation , if doesn't work , reflash the rom.
This procedures , should be erase corrupted files.
let us know.
imdantes
P.S. Format also the sd card
YOU FIND USB , SELECT IT AND TYPING :
task 32 ENTER
task 28 ENTER
task 2A ENTER
info 8 ENTER
task 8 ENTER
Click to expand...
Click to collapse
How do i type those? i pick USB and click OK, then the message showed up "USB PORT CAN NOT OPEN" !
i think the phone usb is not working. When i install WM5TORAGE and try to use the mass store option the computer don't pick the connection...
are there any change to fix this problems?
..........anyone?
your problem same as my.but i didint flash any rom .it original rom from dopod .it suddenly cant sync to my pc.
anyone know how to fix ??....pls give us a hand tq .
Hi ppl. I'm new in the world of Win. mobile and Smartphones.I have an Xperia ( simlockfree logofree ) in dutch.
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707
ROM versie: 1.02.937.3
ROM Datum: 08/29/08
Radioversie: 1.06.25.29
Protocolversie: 52.43.25.24U
Uitbeidingversie: 1.0.55513.1119
Modelnr: X1i
R1AA017 R8A 1215-3311 GENERIC_NL
The phone seems to have some problems. ( restarts sometimes , loong loading time , frizing...etc ). I got back to the dealer and ask for warranty. He sed that the problem is for shure software and i can make an update SEUS. I tried for 3 days to do it and i can't. I have Vista Ultimate 64-bit SP1. The new and fresh Win mobile device center 6.1, working USB ports , different USB cables.I have no firewall.My phone connects without any problems and makes syncronization with sync center. The problem is in bootloader mode. I hear a connection sound , but the SEUS and the sync center doesn't see it. In system/device manager i see it as - mobile usb sync device ( or something like that ).The phone shows 3 colors and serial message . When i put the usb cable in , it changes to usb message. Doesn't do anything else. I tryed with/without SD card , restart , reinstall , reset , change ports , cables , drivers, win updates......all the advice in the forums except changing PC ( i have only 1).......Nothing.
I wanted to see if it's broken or not. I don't want to try hardspl flashing or anything else until i'm 100% shure that the phone is good. I don't want to give the f$%^&rs any reason to deny the warranty. So my question is : is there a solution to be able to connect to the SEUS in bootmode screen?
PS -- if it works i'll go for an different ROM-- i'm not dutch , and neither english , so pls excuse all the errors in this post.
Ty for taking the time to read this post.
Of curse thar iz. Iz da nurmall way! Use tha search-funkjon! Ya hav ta use tha natif Administrator-Account uf Win Vistaz!
karakay said:
I have Vista Ultimate 64-bit SP1.
Click to expand...
Click to collapse
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
fdmedia said:
Thats the Problem. I've got the same Problem with Vista (regardless if 32/64 bit).
This problem occures very often. Try it with Windows XP !
Click to expand...
Click to collapse
TRY IT WITH ADMINISTRATOR ACCOUNT! Are you guys nuts?
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Abuk007 said:
I have the same problem. I've got only 1 account and it has status of administrator. I have run SEUS with admin privilages and no effect ;/
Click to expand...
Click to collapse
This is NOT TRUE ADMIN! Why don't you check this out and solve your problem: http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
Yeah it's strange, so far SEUS is the only use for it lol.
Abuk007 said:
Didn't know that! Thanks It worked (that admin account is very strange looking disabled it after checking what i wanted to check) No new rom (R3AA) in Poland
Click to expand...
Click to collapse
My account is admin but I can't still to see X1 goes further after connect mini-USB cable into X1. Any help?
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
karakay said:
I have admin account . The super-admin account . I did that already...forgot to mention it. Any other solutions?
Click to expand...
Click to collapse
Perhaps it is a 64-Bit issue. I can tell you from my experiments that under Win Vista 32-Bit it is most likely a problem of the USB driver. At least I don't think it's a software issue (By software I mean an application). If you run Windows XP on VirtualPC with USB "Passthrough", SEUS will not work either. So it must be a low-level problem of Vista. As you may know, Vista has a new driver system. I believe the 64-Bit version differs from the 32-Bit version in function.
Last week I checked SEUS with my Xperia and detected it correctly. But yesterday SEUS didn't recognize my X1. I didn't make any changes on my X1 since last week. I used Hard SPL to remove my custom Vodafone ROM 3 months ago, and I update to the official R2 without problems. I have the same problem that all of people who posted here. We need a solution because it's very strange this. Maybe SE made some change in his SEUS to avoid people who used Hard SPL update by the official way? Thank you very much. Best regards
VISTA is the problem......... With the help of an XP PC i used SEUS with no problems. Anyway....i steel have Vista PC , so if there will be an solution for future updates pls post them here. TY
i don't have Vista, XP but same problem...
Persuader X, does it say to you "loading...no image file"?
Sapa13 said:
Persuader X, does it say to you "loading...no image file"?
Click to expand...
Click to collapse
Yes. When I connect it, the color bars disappear and start the progress bar that appears when a ROM is being installed. After a pair of seconds, Xperia reboot and says "no image file "., and comes to the boot screen with color bars again to rest in that state forever.
Let me quote myself
I heard of some people that SEUS ran on Vista when they removed the tick for the USB-connection in the mobile device center. Maybe that helps.
Other said, that they had to install the new driver for the USB-sync-connection; just let Windows Update run while your X1 is in the bootloader-mode connected with your PC - maybe try this more then once; my Windows Update needed four runs to find the driver
Click to expand...
Click to collapse
One of the two points will help you too, you'll see
Hey guys, I can update finally. Try this, like me.
Restore stock Hard SPL. It's posted in this forum.
Run SEUS in the administrator account of Vista.
If you don't do any of the 2 previous things, it won't work!
Best regards.
Hi!
Solution from http://forum.xda-developers.com/showthread.php?t=519317&referrerid=1836412
Clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1). After that the SEUS can identify the X1 and continue with the guide.
Regards
Marcus
Thanks to Marcus that was the perfect solution i spent 6 hours trying to figure this out you are the first one to offer a non flash option.
Cheers
Hello guys,
I have a problem. My p3300 does not connect through Active Sync.
Its everything oright, and with my S200its orght.
The rom is not the original, is a WM 6.1
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
How can i change the rom, without been with active sync?
I have a SD 2gb card, but i can't make a partition on it, and make a SD Flash. :S
Can anyone help me?
Thanks
de-install activesync
download and install the latest version of active sync
make sure that on the conncetions tab the USB connection is tabbed
goodluck
Hey there, and thanks,
I have already make that, and still nothing.
Reinstall the A.S. 4.5, soft reset the pda, and reconnect, restart the pc and still nothiing. :S with my S200(prophet) don't have any problem. :S
More help required :S
tnx
I have the same problem i cant sincronize the pda whith the activesync and i wish to change the rom. Now it's in france and i wish to change it to english, and it's locked to orange france i think. What can i make? It starts in bootloader, but the instalation from the card is not starting. thankx
le. and if i want to install something gives error 260
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
...
quick question...
does it charge?
(i know sounds daft..but...)
or have trouble charging sometimes?
it could be the pins not connecting properly on the device to usb..
*______
/ . == . I
look at device, turn it upside down, now look at the charge slot on device..
Imagine the little picture iv drawn is the charge slot on the device..
''.'' are the ''pins'' on the device..
get a pin and sprize/pull them out SLIGHTLY..
the ''pins'' are hard to see but this could be the problem..
* my p3300 stopped charging, activesync, the lot.. this is MY quick fix!
(hopefull yours too!)
lol
vrumvrum said:
Is possible that exist some sort of problem with that rom that doesnt connect with the pc, or is the phone USB port (it charges, but don't comunicate).
Click to expand...
Click to collapse
just give it a try.. i now know it charges tho.lol
Yes it charges, and i tryied another pda to connect to this pc and it works fine, i changed the mini usb connector, because it was broken
mvenneker said:
hm. well to get back at you thinking it might could be your rom, i dont think so.
did u test the usb cable?
did u test it on another pc?
Click to expand...
Click to collapse
Hello,
Yes, i tested with other pc (4 pcs in total), and the P3300(artemis) isn't recognize by Active sync, but it charges through the usb, but with my S200(prophet) don't have any kind of problem, and connect a Razr X (motorola) to test the cable to and keep working to, so the problem is in the phone.
I tried to clean the conector and all usb contacts still in place and working (have te 5 pins and they move up and down, normally)
in bootload mode it recognize by apearing in the bootom left the USB indication, but have the 260 error in everyway i try to connect the phone to pc.
any help?? :s
Thanks
...
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
...
download this..
http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
raving_nanza said:
try this out for now..... just try it...
* disconnect the device from pc..
* hard reset the device..
* reinstall active sync..
* turn pc off and then on again..
* reinstall active sync..
* turn pc off and then on again..
- when the pc has fully start up..
* connect device..
* i know you already said you have tried uninstalling activesync and reinstalling it but just try it again but this time reseting your pc once its uninstalled.
Click to expand...
Click to collapse
Hy there, i done it more than 5 or 10 times in the 2 home pc's. and nothing.. been the same.
raving_nanza said:
download this..
microsoft.com/windowsmobile/en-us/downloads/microsoft/activesync-download.mspx
Click to expand...
Click to collapse
Hi there,
I have already download the most recent version (AS 4.5), 3 times, and reeinstaled more than 5 ou 10 times, on the office pc, and home pc's.
It's still the same, no connection or syncronising :S
Don0t know more what to do.. :S
...
if that does not work, i dont know what it can be.. sorry mate, if i find out why its not connecting ill let you know..
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
scootie said:
Just an idea.
On your device (not on PC)
Go to Start->Settings->Connections->USB to PC and change the setting (tick or untick the extended network option)
BR
Scootie
Click to expand...
Click to collapse
done and nothing, it still the same.. :s
but thanx anyway
regards
Have you try Hard Reset ?
Hi,
My first post here and try to help !
Do you know how to hard reset your Artemis ? it has works for me one time with the same problem...
But you have to save ALL your data first and reinstall everything after...
(you will find in the forum if you don't know how to hard reset)
Good luck !
i don it a couple of times, with no sucess. :S
I tried to flash a new rom throught the SD Card, but with no sucess to..
i download several ones, and keep to tell that its a invalid certificate, and tried othr been from HTC, tht dont do anything, pass directly to the 3 color bar menu. nothintg more hapend.. :S
If it help.. :
Rom version Touch_AF pTG - WM6.1
radio version 02.94.90
OS: 4.1.0.7
IPL:3.13.0001
SPL.3.13.0000
Cheers
Wrong SPL I think...
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Castorlama said:
It help ! But I think it's not a good news...
It seems that you haven't CID unlock your device before flashing a new ROM... but you need to have a good working active sync connection to do it !
see : artemis USPL in the forum or artemisUSPL_nosize (i cant' post url)
(with the second one you can flash any ROM size without any problem)
Maybe if you find a way to do it with SDCARD, you will be able to flash a new ROM, but maybe you have a hardware failure...
Click to expand...
Click to collapse
Hi,
but theres my problem.. i dont have a working A.S. connection between the phone ad the pc. :s
most probably is the rom that don't communicate with the computer, because it charge, so the usb is ok. :s
ill try through Blue ttooth to syncro the Uspl, and then try to change the rom through sdflash.. i'll pray to God to this work..