Hi guys, the screen of my XDA IIi just got broke , and i want to know where i can find a replacement, i have seached almost all the web sites and nothing, if one of you guys know where i can get a new LCD creen for my XDA IIi i'll thank you for the rest of my life, the creen of the XDA II is different than the new XDA IIi i tried that one and did not fit
Please help me
Regards;
Jorge
xda II screen
Hi.
I'm sorry I can't help you, but maybe you could help me. I have an MDA II from T-Mobile with a bleeding screen. you stated that you tried to replace one into your MDA IIi.
do you still have an intact LCD with 64 K that would fit into my MDA II ?
thanks in advance
all the best,
mike
I just had my pda2k screen replaced by the fellas at htc USA. You can find their info on www.clubimate.com under service centers. They did a good job, but forgot the other 1/2 of the repairs. They finished them for free after realizing their faux pas, but also had a shipping snafu.
hey
gronwald
i have the XDA II screen intact and good condition, it is new, if you want it, i can sell it to you
let me know if you are interested
regards
Jorge
hi jorge,
yes, I'm interested. screen meaning the LCD and touch screen in one unit, or just the LCD ?
also, is it the 64 K one ?
-might be easier to email me at : [email protected]
thanks in advance.
mike
hey
hi, i do not know about the 64K , but all i can tell is the screen is a used one almost new has no scratches on it , and it has the touch tone screen and the LCD on it,
It is made for the XDAII,
remember
If you have any questions feel free to ask
[email protected]
re screen have you sold it yet if not i am interested
gronwald said:
hi jorge,
yes, I'm interested. screen meaning the LCD and touch screen in one unit, or just the LCD ?
also, is it the 64 K one ?
-might be easier to email me at : [email protected]
thanks in advance.
mike
Click to expand...
Click to collapse
Related
Long overdue, here's the pictures of the insides of an XDAII we took a while ago. If you click the images, you get the original version. The originals can be up to 1.5 MB a piece.
Any tips on opening up one of these beasts, I have to do a motherboard transplant and dont wish to destry 2 machines in the process, any advice greatly appreciated.
Any tips on re-connecting that ribbon cable for the LCD screen? I tried everything to get those little spring loaded pokey things under the retainer clip but couldn't. Ended up breaking the retainer. So I just stuck a piece of film negative in there to hold it down. Not really professional, but that connector is a *****. What were they thinking?!?!
A while ago, I published a graphical step-by-step procedure to fix the a speaker problem on MDA2, i-Mates, Qtek2020, etc, etc...
I created a spanish and an english version, but somehow I forgot where I published the english version... :roll:
But you can check the spanish version here...
It's very straightforward since the pictures have illustrations so I'm sure you will get the idea just by looking at the pictures... :wink:
Good luck!
the 14th pad of my XDA2 is miss.
I wanna solder 14th pad of connector with test pad.
Can you help me to measure the test pad for pin 14 ?
XDA II Service Manual
cruisin-thru said:
Any tips on opening up one of these beasts, I have to do a motherboard transplant and dont wish to destry 2 machines in the process, any advice greatly appreciated.
Click to expand...
Click to collapse
ftp://xda:[email protected]/service manuals/HTC XDA II-MDA II Service Manual.pdf
Re: XDA II Service Manual
steelorange said:
cruisin-thru said:
Any tips on opening up one of these beasts, I have to do a motherboard transplant and dont wish to destry 2 machines in the process, any advice greatly appreciated.
Click to expand...
Click to collapse
ftp://xda:[email protected]/service manuals/HTC XDA II-MDA II Service Manual.pdf
Click to expand...
Click to collapse
Sorry, I can't get into the "service manuals" directory. Can you pm me the file or another link?
Cheers,
here it is
Here u go...
Re: here it is
steelorange said:
Here u go...
Click to expand...
Click to collapse
Thank you for that! you just saved my XDA. Speaker was working intermittendly. Dismantled it with the help of manual and gave the contact springs a little more preload. Sorted!!!
But I almost **** in my pants when I was pulling on th esprings :lol:
hi
can i replace 32MB ChipDisk with a bigger size like 64MB or 128MB?
did anyone try it?
if the answer is YES , tell me how?
thanx alot
[email protected]
xda IIs digitizer replacement guide
.thanks for the mda dissassembly guide for the mda model. but i do need O2 xda II s guide. please...
thats what wiki is for
http://wiki.xda-developers.com/index.php?pagename=BA_Technical
thanks for the links . it was my first post here and you replied so quick. keep it up
Hi gays!...
Please note that you can't change parts between XDA II and MDA II.
The PCB and screen are different between those models.
Note that the screen on the MDA II is different than XDA II. MDA II screen's back light is much darker than of the XDA II.
hi,
My LCD has cracked and i am looking for a replacement. I contacted pocketpctechs but they said they do not have the part for this particular phone. I am wondering if the LCD is the same as the TyTN or Wizard because if im not mistaken there the same size and resolution. Any help or suggestions would greatly be appreciated.
THANKS!!
please help!!
c'mon guys not one person knows where to get an lcd for this phone?? PLEASE I WANT TO GET THIS PHONE REPAIRED!!
thanks
Most new HTC devices use the same LCD. However, if I remember correctly, Herald does not have a reflective screen, so it is probably different.
I opened up the wing to replace it..its a different LCD
I need to know which type of lcd screen is in HTC Herald.
I was looking for it but I found nothing
If someone know it or know where is some info about it and could help me I would be really glad of his help.
Thomas
At the moment only HTC can fix that device. Check on website in support section, or try and find a number for the UK location where the international warranty is still valid.
WE can offer this LCD
For the LCD of HTC Herald/p4350,right now have three editions:SONY ACX357AKM8(p/n60H00062-00),Toppoly TD028TTEB2,Hitachi unknown model name.
If some one want to buy this LCD,please contact me.
Hello,
i need the Sony LCD, because mine (P/N: 60H00062-00M) is broken
Can you tell me what it costs with(without) the touchpad ?
Thank you !
Everyone having the same Problem:
Check out ebay.com and ebay.cn - Very competitive Prices !
pda parts
hi, we have all kinds pda parts , including iphone , htc , blackberry, palm tro and so on , for 60H0062-00M , pls feel free to contact us online by :[email protected]
thanks .
p4350.s1
twinwiu said:
I need to know which type of lcd screen is in HTC Herald.
I was looking for it but I found nothing
If someone know it or know where is some info about it and could help me I would be really glad of his help.
Thomas
Click to expand...
Click to collapse
hi, we have all kinds pda parts , including 60H00062-00M , feel free to get any price by msn: [email protected]
I do not want to start a new thread because it seems like what I have to say is related to the thread. I have a total of two T-Mobile Wings and I got both phones at different times. I got my first Wing about 2 months ago and I just got my 2nd one about a week ago. I flashed both phones to Tran's 4.5 PointUI with similar settings. However, I realize in comparison that the week old Wing has a much dimmer backlight compared to my 2 month old Wing with the same exact backlight settings. I thought it might have been the battery so I swap the batteries and still my older Wing has a much brighter backlight. Is it a quality difference or is my Wing defective? I'll take a couple of snap shots if possible later. I just got my Wing about a week so I assume I can get an exchange in their 30-day policy by T-Mobile?
Well the title says it all. I broke the screen of my p3600 and i damaged the case also. Does someone have any idea how much it will cost to repair my p3600?
I know that with laptops, the screen can run up to the same amounth as the laptop... lol... Not sure with ppc's though.
Ebay object number 120124498971 [ GBP 65.99 ] LCD for HTC P3600 P3300, SPV M700 M650, XDA Orbit S300+
Well the thing is i have to replace screen my self. Is there a tutorial on how to disassemble the phone?
Then this thread might be of some help (some instructions can be found), but maybe you can search a little further...
kkelis said:
Well the thing is i have to replace screen my self. Is there a tutorial on how to disassemble the phone?
Click to expand...
Click to collapse
kkelis did you have any joy changing your screen? I've done the same got a crack in the screen almost corner to corner so its knackered, just wondered if you had any success before I get the screwdrivers out.
kkelis said:
Well the thing is i have to replace screen my self. Is there a tutorial on how to disassemble the phone?
Click to expand...
Click to collapse
My friend here is your answer.
Buy what you need, LCD screen and housing from those guys:
http://cnn.cn/shop/htc-p3600-c-277_278.html
Then use my guide on how to disassembe your Trinity. You can find it here:
http://forum.xda-developers.com/showthread.php?t=311463
Best regards!
dimanto said:
My friend here is your answer.
Buy what you need, LCD screen and housing from those guys:
http://cnn.cn/shop/htc-p3600-c-277_278.html
Then use my guide on how to disassembe your Trinity. You can find it here:
http://forum.xda-developers.com/showthread.php?t=311463
Best regards!
Click to expand...
Click to collapse
Thanks you very very very very much!!
I have just broken my Trinity's Screen this weekend. However I don't know if its only the touchpad or if the LCD is also damaged. How can I figure this out??
I think I order the touchpad only first and if not ok will also order the LCD
Thanks a lot and kind regards
great thanks for the link and the info, taken mine apart and its the screen thats gone so ordered it up.
was about to order one from here until your link came through, all being well your guys are about half the cost. thanks again..
http://www.displaydoctor.co.uk/
rdkay said:
Thanks you very very very very much!!
I have just broken my Trinity's Screen this weekend. However I don't know if its only the touchpad or if the LCD is also damaged. How can I figure this out??
I think I order the touchpad only first and if not ok will also order the LCD
Thanks a lot and kind regards
Click to expand...
Click to collapse
Post a photo and I will tell you. But in general if you see black spots on the screen then the LCD is broken. On the other hand the new one is so cheap that I would advice you to buy the whole package and not just the digitizer because it is easier to repair.
Regards.
Hi:
This is my first post. Fisrt of all sorry for my english (I don´t use it a long time ago...).
I´ve been reading for a long time this forum. Thanks everybody for all posts and software.
I have had a P3600 for one year. Two weeks ago I bought a new case, but i made a mistake when i tried to change it: the conexion between LCD and Mother Board wass broken.
I´m very happy with machine, and I want buy a new LCD Screen.
There are a web where I believe I can buy one:
http://cnn.cn/shop/p3600dopod-d810-screen-p-1734.html
Someone knows if this LCD Screen is ok for our machines?.
Thanks a lot again.
Rewards.
search on xda devs about "LCD G1" "LCD 56" screens and check on yours which one you have ! in think the way you can tell is where the window on the back of the screen is located!
you can also buy em on ebay, dont now about the difference in quality!
i got mine off ebay works fine! not as good as the original tho
thamks a lot!!!:
I´ll search on forum and I´ll search on ebay aswell.
Rewards
Hi:
I´ve been searching by forum and by ebay. I´ve found three products, but i don´t know which is the correct:
- Touch Screen Pad:
http://cgi.ebay.com/I157-Touch-Scre...ryZ20336QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
- Touch Screen Digitizer:
http://cgi.ebay.com/I094-Touch-Scre...ryZ20336QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
- LCD Screen Display:
http://cgi.ebay.com/I143-LCD-Screen...VQQcmdZViewItemQQ_trksidZp1638Q2em118Q2el1247
I had broken the connector between Mother Board and LCD. What product should I buy?.
Thanks and rewards
the first two links are just touch screen sensors( digitiser) the last link you posted is the actual screen and the digitiser together.
like i said before you need to check which version screen you currently have !
the third link you posted has the info you need to check!
thank you, idristo:
I´ve read the third post and i´ve checked my lcd scrren. I have a G1. So, i´ve bougth the complete scrren (is cheaper than 56...).
Thank you for your answers.
Rewards!!!
You might want to check out RepairsUniverse.com they have all the parts for both the 1st gen and the 2nd generation.
They sorted me out, and provided fitting instructions also. Took me 30minutes or so to install but def worth it!!