1.) install the thinkoutside driver for bluetooth mouse
2.) when you were ask to reboot, push "cancel" and..
3.) copy the attached file in your /windows directory
4.) reboot
5.) disable "power efficient mode" and set mouse pointer to "safe"
works fine on my magician & microsoft intellimouse explorer BT
6.) have fun :twisted: :twisted:
Niceeeeeeeeeee! what about bluetooth keyboards?
no file attached :roll: :roll:
ooops something went wrong
this is the original link to the file
http://www.firstloox.org/forums/attachment.php?attachmentid=483
TNX!! works on xdaII with wm5 buzzmobile 1.65b64 and intellimouse explorer
Mouse for a Pocket PC? I don't get it.
Is it possible to use this on a Qtek 9000 with the M$ BT mouse and how?
THnx
Djslash
Dandie said:
Mouse for a Pocket PC? I don't get it.
Click to expand...
Click to collapse
Same here. Hacking the Magician to act as a Bluetooth HID optical mouse by using the camera as a motion detection sensor, now THAT would be a hack...
Bluetooth HID optical mouse by using the camera as a motion detection sensor
Click to expand...
Click to collapse
Same line of thinking - http://www.hackaday.com/entry/1234000770073476/
V
@psych0t1c: This would be near to impossible, because the cheap CCD in the Magician needs much light to recognize anything. Now if you put onto your desk it could not constitute any difference on different places.
Chatty said:
@psych0t1c: This would be near to impossible, because the cheap CCD in the Magician needs much light to recognize anything.
Click to expand...
Click to collapse
That's another reason I'd consider it a really impressive hack.
psych0t1c said:
Chatty said:
@psych0t1c: This would be near to impossible, because the cheap CCD in the Magician needs much light to recognize anything.
Click to expand...
Click to collapse
quote]
One Word : Use_The_Camera's_Flashlight
Seriously though - I have this cheap mouse that works on a Wm2003Se Pocketpc like a charm but not on my WM5 JJ . Which version of the STowaway Mouse is his 4.2 ? 4.3? - Did someone get it to work on WM5?
I got to play with a Stowaway Mouse for a week :lol: - You should have seen the students faces when I pull out my "mini Laptop" in the coffee shop and they still sit with Old NoteBook technology :twisted:
Now without the mouse it is not as impressive
Cant we hack the latest WM5 compatible driver as the previous one's - Who knows how to reverse engineer DLL's??
Later
Skillie
Click to expand...
Click to collapse
Well, I've tried to use it with a Qtek9000 and WM5.0, without success.
Stowaway mouse driver version 4.4, but finishes always with the two messages bellow, poping-up:
- Error
Keyoard driver not functioning!
- Keyboard Driver Error!
The Keyboa driver ("StowawayXT.dll")is not responding.
Please reinstall.
I might be some problem with the .dll.
Any directions or ideas?
I have the same problem as Conchas. not working :-(
Try this: http://forum.xda-developers.com/viewtopic.php?t=32068
Works for me. I have not Magician, but it was teststed with all versions of BlueAngel's WM5 ['orignal', Himalaya port and Wizard port].
ingmar said:
ooops something went wrong
this is the original link to the file
http://www.firstloox.org/forums/attachment.php?attachmentid=483
Click to expand...
Click to collapse
I'm willing to run it through all the tests, I've spent about 20 hours working on this so far and if anyone can give me the file I'll keep working until I either get it to work or...
Thanks very much,
Peter
Related
Guys,
Just plugged in a USB mouse via the 4in1 socket. The device powers the mouse after a soft reset and I can use the scroll wheel to scroll.
Anyone know if there's a facility to enable a mouse pointer like on the Athena?
Cheers.
Hi waveydavey.
Did you mean Orbit?
I also want to know, USB keyboard works faultlessly
tommy
mackaby007 said:
Hi waveydavey.
Did you mean Orbit?
Click to expand...
Click to collapse
Oops. Yep, pretty much. What I meant to say is:-
Guys,
Just plugged in a USB mouse via the 4in1 socket. The device powers the mouse after a soft reset and I can use the scroll wheel to scroll.
Anyone know if there's a facility to enable a mouse pointer like on the Artemis?
Cheers.
Clear something up for me guys. With my T-Mo Ameo, i received the the mains charger, a USB cable, and a VGA out cable. Should there be another one for connecting USB devices? What is this 4 in 1 socket?
Hi,
It's an optional cable, which you can buy:
http://www.expansys.nl/p.aspx?i=145166
Thanks, I've ordered one.
Yep, I have one too. Hence the question.
I've tried USB Keyboard, Hard drive and Mouse. All seem to work, but I need a mouse pointer to see where the mouse is pointing obviously and I can't seem to find one.
Sorry for hijacking your thread Mr Wavey, as soon as my cable arrives I'll see if I can answer your question
Hi
I've tried the 4-1 cable and have also had no luck with the mouse pointer. Tried downloading the iGo Stowaway BT drivers but no luck. I think I will wait for expansys to get the new iGo BT mouse in stock in April (about £35) - they list the Advantage as being compatible. Unless anyone has any other ideas?
On a seperate note - I've managed to get VGA out working on my LCD TV through the PC input but have so far not had any look with sound. Ideally I would like to be able to plug in into my aux of my hifi but so far my cables don't seem to work?
Any ideas anyone?
Cheers
SPheler.....
I found application called sphelper, it was meant for smartphones to enable one to run. ppc software...and it gave an on screen cursor
www.bobsoft.com/sphelper
Shows a cursor....
I will try it, unplugging now
....
..
plugged in mouse, the mouse still works but its invisible and my cursor is in the middle of my screen
Oh well, I didnt have much hope. Just thought I might be lucky...
The search continues......
Problem solved
I have found a lurverly little tool discovered/created? by non other than Paul who runs www.modaco.com
http://www.modaco.com/Athena-Test-Mouse-Driver-t253431.html
Try this my brothers, it's nifty it is.
Remember to:
-Install cab file
-Soft reset device
-Only then, once you have seen the little screen pop up saying test mouse or something, plug in the adapter and the mouse.
I have found it works exceedingly well. The pointer can stutter slightly but I have not found it a problem at all.
Enjoy!
I don't really want to sign up with Modaco just to get the file.
Can you upload it here?
Good find, by the way....
I might get flamed but....
Custom built CAB based on http://www.geocities.jp/jsus_y/usbmouse/usbmouse.html
All props to Paul
Cheers for that.
The cursor disappears when screen is tapped
Cursor disappears when screen is taped. Need to unplug and plug before it comes back. So I sesist the temptation to tap the screen
yarod_g14 said:
Custom built CAB based on http://www.geocities.jp/jsus_y/usbmouse/usbmouse.html
All props to Paul
Click to expand...
Click to collapse
Thanks for that Yarod....you're right, it works a treat!! I can live with the occasional stutter. The Athena is becoming ever closer to a Mobile PC.....just with a different more limited O/S but superb connectivity options.
Hello, had someone else testing this programm on a Ameo with German language?
I install it and get the massege "new USB Mouse" but nothing happens :-(
just click ok and plug in your mouse. remember not to plug in before soft reset. the language does not matter.
O.k. I do a soft reset, than i tapped on o.k. after this i plug in my mouse.... nothing happens.
Is there a special brand of mouse that works with this programm?
I would be so happy if it works
The other day my touchscreen response time started to flicker and then gave out within a matter of a few hours...
I am making due with the help of smarts key and sphelper (adds a mouse you can move with the arrow keys.) The only functions that I lost were the ability to play my games and to change anything with battery status (beta 3).
I tried to connect a M$ Bluetooth mouse but it wanted a passkey which M$ does not provide. I tried installing the drivers from Think Outside's Stowaway® Travel Mouse but the software would not even find my M$ mouse. Has any one found a workaround to get the M$ mouse to work on a wizard?
I think all I need to do it replace the touch screen. Has anyone had any experience with this? I downloaded the service manual off the wiki but don’t want to trash my phone without a backup one ready to go.
Thanks for reading and any help is much appreciated.
a bluetooth mouse maybe?
has anyone at least gottena bluetooth mouse working sucessfully? and if so what brand was it?
Not the solution you are asking for, but something that will drastically help:
Check ebay.com items
190106747985
150117976820
330115693756
Thanks for the links...if I get ballesy enough I will try and do it myself...hopeful I will get a new phone soon (if i can wait til June the Kaiser) and I can try and fix this one...or at least sell it on eBay
This one will give you access at least until you find another solution: you get your PDA on your desktop screen and can use it with desktop keyboard and mouse. I am using it myself and started to use my MDA more on the desktop than directly.
You can hook it up via USB or WLAN ...
http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro
Junner2003 said:
This one will give you access at least until you find another solution: you get your PDA on your desktop screen and can use it with desktop keyboard and mouse. I am using it myself and started to use my MDA more on the desktop than directly.
You can hook it up via USB or WLAN ...
http://www.soti.net/default.asp?Cmd=Products&SubCmd=PCPro
Click to expand...
Click to collapse
Thank you so much that was exactly what I needed to get battery status set up the way I liked it as well as all of the registry keys set. Thanks again
Well,
I am glad I could help!
In case it is only the digitizer and not your LCD screen: SPB MOBILE SHELL lets you almost do anything on your PPC with only softkeys and navigation pad. The HW keyboard works on your device anyway I asume? If you want to take a closer look: http://www.spbsoftwarehouse.com/products/mobileshell/screenshots.html?en
No words
http://www.youtube.com/watch?v=DhdUQZxZLoQ
Only need
Hardware: HTC Athena and a BT Mouse
Sofware: WA3+WAD, WM6 Remote Desktop in 3g connection (wifi will be better than this) and Teksoft Bluemouse 1.0
If you like my video vote me please
danieletroiano said:
No words
http://www.youtube.com/watch?v=DhdUQZxZLoQ
Only need
Hardware: HTC Athena and a BT Mouse
Sofware: WA3+WAD, WM6 Remote Desktop in 3g connection (wifi will be better than this) and Teksoft Bluemouse 1.0
If you like my video vote me please
Click to expand...
Click to collapse
Well done. Welcome to the club.
Thats pretty darn cool - I'm gonna be looking at recreating you're WM desktop, sorry!
gread athena umpc
danieletroiano said:
No words
http://www.youtube.com/watch?v=DhdUQZxZLoQ
Only need
Hardware: HTC Athena and a BT Mouse
Sofware: WA3+WAD, WM6 Remote Desktop in 3g connection (wifi will be better than this) and Teksoft Bluemouse 1.0
If you like my video vote me please
Click to expand...
Click to collapse
hey man well done.please help me make the same on my athena..
dekyprio//please email me to :[email protected]
Very nice.
-Krip
danieletroiano said:
No words
http://www.youtube.com/watch?v=DhdUQZxZLoQ
Only need
Hardware: HTC Athena and a BT Mouse
Sofware: WA3+WAD, WM6 Remote Desktop in 3g connection (wifi will be better than this) and Teksoft Bluemouse 1.0
If you like my video vote me please
Click to expand...
Click to collapse
Nice video!
What mouse are you using? Can you provide a model number and manufacturer name?
Bt mouse bought on ebay......
Brand "Kevler"
Model "MB25R (BT25)"
It's an unknow brand but i see others like this (probably same product) on ebay branded MSI.
http://cgi.ebay.it/MSI-Mega-Optical...yZ116296QQrdZ1QQssPageNameZWD2VQQcmdZViewItem
Congrats. You gonna love it.
r u using vnc to remote control your PC or just use the athena locally? since i saw a lot of icons on yr desktop...
WM6 Remote Desktop in 3G connection
that sounds cool. it'd be great if athena can support BT mouse and keyboard at the same time... :-D
royalmail said:
that sounds cool. it'd be great if athena can support BT mouse and keyboard at the same time... :-D
Click to expand...
Click to collapse
I wonder if it would support a BlueTooth keyboard with built in trackball or something similar.
danieletroiano said:
No words
http://www.youtube.com/watch?v=DhdUQZxZLoQ
Only need
Hardware: HTC Athena and a BT Mouse
Sofware: WA3+WAD, WM6 Remote Desktop in 3g connection (wifi will be better than this) and Teksoft Bluemouse 1.0
If you like my video vote me please
Click to expand...
Click to collapse
Is Teksoft Bluemouse 1.0 free?
test results...
I got home and tested the setup with my LogiTech Mx900 Optical mouse. The Athena recognized the mouse and connected to it like a champ. I then installed the Teksoft Bluemouse 1.0 software. I had to soft reset my device twice. Sometimes happens. On the second boot, the little icon for Teksoft Bluemouse 1.0 was in the tray and I saw the mouse cursor...EXCITED. But, when I tried to use the mouse, the cursor jumped all over the place and I wasn't able to really use it. I have it disabled for now. I'm going to wait for other users to test this out. I didn't get a chance to test it through Remote Desktop because it wasn't working well on the Athena's Today screen.
This link references the problem I'm experiencing and the forum explains that a fix will be released in the next version.
http://www.teksoftco.com/forum/viewtopic.php?p=2881
Some of my customers use a BlueTooth mouse so I'm going to try different models and see if I can get better results. The next one I may try is a Kensignton mini as well as a few others. I'll provide my results once I've had a chance to perform further testing.
If anyone has better results or the same or worse, please let us know. I'm anxious to purchase a mouse that works.
ltxda said:
If anyone has better results or the same or worse, please let us know. I'm anxious to purchase a mouse that works.
Click to expand...
Click to collapse
This one works and I have/use it.
Targus AMB02 rechargeable bluetooth notebook mouse cost about 48 euro
Note the model number! There is a LASER BT mouse from Targus which did not work for me.
Sorry I could not post link cos I am off in a hurry
do you guys need to install any driver for BT mouse?
I think it's just a matter of driver for WM5/6. right?
time will come... :-D
I do the same thing!
Although I don't use Wisbar Advance, I use TrueVGA. And the Remote Connection feature is absolutely great!
victoradjei said:
This one works and I have/use it.
Targus AMB02 rechargeable bluetooth notebook mouse cost about 48 euro
Note the model number! There is a LASER BT mouse from Targus which did not work for me.
Sorry I could not post link cos I am off in a hurry
Click to expand...
Click to collapse
Ok, thanks. I'm going to try several different ones. I totally forgot about Targus. They have the little mouse which are good.
royalmail said:
do you guys need to install any driver for BT mouse?
I think it's just a matter of driver for WM5/6. right?
time will come... :-D
Click to expand...
Click to collapse
The only "driver"/software I had to install was for the mouse icon. The mouse itself was picked up by my phone without a problem. I could click on the screen but I didn't know where the icon was. If you have a BlueTooth mouse, try to bind it to your phone and see if it shows up. Make sure you select input device once you get it connected. I just used "0000" as the pin and mine worked.
I paired and used my Apple Pro bluetooth keyboard without problems.
I can type away on the full qwerty keyboard with no need for a usb 4in1.
Where can I get the Mouse pointer software? I want to try both KB and mouse as I have the MS bluetooth explorer mouse.
I recently purchased an MSI Bluetooth Mouse... i paired it with my Advantage just normally...since the mouse does not require a passkey.. there was a service available that sed Input Device .... I ticked on that and clicked finished... and then wen i installed and opened teksoft and wen i click start... a pop-up window comes up and says Unable to connect Mouse. Please check if the mouse if paired (or) Try to Pair it again.
PLEASE HELP!!!..... I NEED TO GET THE BT MOUSE WORKIGN DESPERATELY!
ok people i the mouse connected and all...but in the end...i can even scroll and clicked a few things on the pocket pc as well from mouse...BUT I CANT SEE THE MOUSE CURSOR...HELP PLEASE!!!!
compatible mouse...
bilalperwaiz said:
ok people i the mouse connected and all...but in the end...i can even scroll and clicked a few things on the pocket pc as well from mouse...BUT I CANT SEE THE MOUSE CURSOR...HELP PLEASE!!!!
Click to expand...
Click to collapse
Not all mice work with this product. One I know for sure that does is as follows:
AnyCom BTM-100
- Bluetooth 1.1
- Work Time = Up to 20 Hours
- Stand by Time = Up to 2000 Hours
- Resolution 800 DPI Optical
- Profile is HID with boot support
- Powered by 2x AAA Ni-Mh batteries and rechargeable with USB adapter (included)
- Radio Class 2
- Chipset CSR BC01
- Dimensions (H x W x T), 28.5 x 48 x 100.5 mm...or in inches 1.12 x 1.88 x 3.397.
- Weight 48 grams excluding batteries
Very sleek, small/portable and sexy looking. Matches my black x7500 and works perfectly with my athena. I tried at least 6 different mice with this software and only two worked.
really...but the thing izz that the mouse connected and even scrolling and clicking some things izz possible...it's just the MOUSE POINTER THAT WON'T SHOW UP!!!
bilalperwaiz said:
really...but the thing izz that the mouse connected and even scrolling and clicking some things izz possible...it's just the MOUSE POINTER THAT WON'T SHOW UP!!!
Click to expand...
Click to collapse
That's a symptom of the compatibility issues. I ran into the same thing. The point of BlueMouse is to provide the cursor. You can have it click and stuff without BlueMouse as I did with some Logitech mice.
It was frustrating for me during testing also. What mouse do you have?
MSI BlueMouse BM-100
bilalperwaiz said:
MSI BlueMouse BM-100
Click to expand...
Click to collapse
Have you updated your device to WM6? If you did then uninstall BlueMouse as there is native mouse support in WM6 and it works great. I just tried it and won't be using BlueMouse again unless they provide enhancements that the native functionality doesn't offer.
HOW TO!?
DUDE... I WOULD UPDATE IT IF I KNEW HOW TO...i really dont know WHAT to download and WHAT to use...i've only update and modded my Nokia Phones Before... I REALLY NEED HELP...!!!
bilalperwaiz said:
DUDE... I WOULD UPDATE IT IF I KNEW HOW TO...i really dont know WHAT to download and WHAT to use...i've only update and modded my Nokia Phones Before... I REALLY NEED HELP...!!!
Click to expand...
Click to collapse
If you have the x7500/Advantage like i do, then use the HTC distro on the links.
I used this on mine without any problems:
http://uploaded.de/?id=430xr4 - HTC__001 - version with spl,ipl and etc
Which Files
hey bro...ok i need HELP FROM YOU..id be obliged if yu do help me...ok so besydes THE ILE QUOTED ABOVE...WHAT OTHER FIELS DO I DOWNLOAD...like the other two from the WM6 Thread and NOT THE LAST ONE ...which i presume izz for T-MO AMEO...and how do i start this like...from the bootlogger thiny..liek i press the power key and the camera key..that right or wat!?? ... pluss imma need ur IM....and what'd u mean HTC Distro???
bilalperwaiz said:
hey bro...ok i need HELP FROM YOU..id be obliged if yu do help me...ok so besydes THE ILE QUOTED ABOVE...WHAT OTHER FIELS DO I DOWNLOAD...like the other two from the WM6 Thread and NOT THE LAST ONE ...which i presume izz for T-MO AMEO...and how do i start this like...from the bootlogger thiny..liek i press the power key and the camera key..that right or wat!?? ... pluss imma need ur IM....and what'd u mean HTC Distro???
Click to expand...
Click to collapse
- Remove SD card. Not necessary as mine worked with SD card inserted but it'll help avoid potential issues.
- Synch your device, to backup contacts, etc.
- Download the file from the link I posted. This is the ROM update for the x7500 from HTC. Ignore the other files on the other post.
- Run the file you downloaded from the link off of your PC. It'll run an update on your phone through ActiveSync. It'll wipe out all contents and install WM6.
This will run and upgrade your device. Don't forget it's going to wipe it out and set it up with WM6 with factory defaults. Enough to get you going?
...thank You Very Very Much...an Uhh Lissen My Device...the Rom Iz 1.25 soo.... i dont do anythign right...that file will do the rest...that right!??
bilalperwaiz said:
...thank You Very Very Much...an Uhh Lissen My Device...the Rom Iz 1.25
Click to expand...
Click to collapse
After applying the file:
ROM Version: 2.20.405.1
ROM Date: 06/21/07
Radio Version: 1.45.00.00
Protocol Version: 32.78.7020.19H
ExtROM Version: 2.20.405.101
oh i see...adn WM6 will be installed!???...OH AND WAS WONDERING ..WILL I NEED A Bluetooth mouse diver to make a mouse work..or JUST DIRECT!?
bilalperwaiz said:
oh i see...adn WM6 will be installed!???...OH AND WAS WONDERING ..WILL I NEED A Bluetooth mouse diver to make a mouse work..or JUST DIRECT!?
Click to expand...
Click to collapse
Yes WM6 will be installed and no need for BlueMouse or additional BT driver. Mouse, if compatible, will work "direct".
oh...aite bro..imma do the installin stuff just now aite... n imma let u know...!!! thanx!
have to chuckle a little..Help desk in USA helping user in subcontinent!!
hello!
im in a trounle here i bought a mogo bluetooth mouse , very nice one
it connects ok, its paired and checked the input setting on pairing
but my win mobile 6 dont show the pointer how do i activate this?
im using htc advantage with the wm6 i download from here
thanks a lot!!
ruyzalim said:
hello!
im in a trounle here i bought a mogo bluetooth mouse , very nice one
it connects ok, its paired and checked the input setting on pairing
but my win mobile 6 dont show the pointer how do i activate this?
im using htc advantage with the wm6 i download from here
thanks a lot!!
Click to expand...
Click to collapse
Try deleting mouse from device then pair again. If it doesn't work then it may be that the mouse is just not compatible with WM6. When you pair the device, can you click around and get actions to happen or nothing happens?
ltxda said:
Try deleting mouse from device then pair again. If it doesn't work then it may be that the mouse is just not compatible with WM6. When you pair the device, can you click around and get actions to happen or nothing happens?
Click to expand...
Click to collapse
no nothing hapens , the mouse is conected and paired , but nothing hapens
same thing with windows mobile6 suport, everithing conected ok but nothing hapens , this mouse was expensive
HI!
Does anyone know if there is a wireless keyboard that will support wm6.1? I bought an igo and it was fine on my jasjam (running wm5) but when I upgraded to wm6 it stopped working and igo will not release new drivers for it. I now have a kaiser but still want a wireless keyboard
If anyone could help that would be great!
Thanks
My igo stowaway worked fine on my wm6 kaiser... and works fine on my wm6.1 omnia
can you please tell me what driver you used? My igo stoaway keyboard only has drivers for wm5 and PPC2003
The stowaway 5 driver works fine on my kaiser... the omnia worked out of the box.
Here's the driver i use for my stowaway... works flawlessly.
thats the cab i tried to use too
What stowaway keyboards do you guys have? is it this one?
I'm curious, what do you guys use wireless keyboards for? I don't see the benefit since the built in keyboard is so great.
-haze- said:
I'm curious, what do you guys use wireless keyboards for? I don't see the benefit since the built in keyboard is so great.
Click to expand...
Click to collapse
The built in keyboard is so....er... whats the world that isn't great... barely acceptable?
The stowaway on the other hand has proper keys, like the ones on a real pc keyboard. Along with a nice set of keyboard short cuts and a control key!
The built in one is fine for a quick text message. But if you're planning on doing any writing for longer that 10 minutes the stowaway is an amazingly good investment.
So If i'm on the train, I open my stowaway, put the pda on the built in stand, and type. just as quick as a laptop and nowhere near the bulk.
The one in the thumbnail looks very similar to mine.
all you need is
an external keyboard, larger external screen, better antenna, maybe some proper dasd...
Get a netPC!
I used it in landscape but here's someone with a Kaiser who used it in portrait...
I used to use the stowaway iGo keyboard with my Tilt, it's great for all the reasons psionandy said, but...
mrg2003 has a point, and so now the iGo is used with this:
BUT for the same reasons psionandy said... it also has a built-in qwerty, but to borrow on mrg2003's sarcasm, it IS a full Windows XP Pro computer, and setting it up as a portable workstation with an iGo and a mouse is a breeze.
Actually right now it's my desktop computer,too
Would I use my iGo keyboard with my Tilt again? Not really, because the built-in qwerty is good enough for on-the-go, and if I have plans to do more than momentary computing outside the home, I take the UX with the iGo and just use that. BUT... not everyone has a UX like I do, SO THAT SAID, if you want to do extended computing on your Tilt, yeah, the iGo keyboard is the WAY TO GO.
Tilt and Stowaway
Just got the IGo Stowaway for my AT&T Tilt and it seems to work out of the box with WM6.1 - except for the function commands (written in blue). Does anyone know if the driver is needed for the function commands to work properly, or are those "blue" commands on the Stowaway for some other PDA?
Thanks,
ClbGld
I love my Celio Redfly.
keyboard/monitor expander/powers my Tilt.
Works out of the box.
Smaller keyboard than the stowaway... much improved screen.
I use Apple Bluetooth keyboard and Apple Might Mouse xD
loving my Celio Redfly
I'm not sure why your iGo Stowaway isn't working. I had trouble getting it to work at first when I tried downloading the .cab directly from my Tilt. When I installed it off my PC it worked just fine. Maybe you have a corrupted .cab. I've been using my Celio Redfly almost exclusively lately and have to say it was the best $100 I've ever spent. It powers up instantly, has amazing battery life, and is very portable.
bumblefreak said:
I'm not sure why your iGo Stowaway isn't working. I had trouble getting it to work at first when I tried downloading the .cab directly from my Tilt. When I installed it off my PC it worked just fine. Maybe you have a corrupted .cab. I've been using my Celio Redfly almost exclusively lately and have to say it was the best $100 I've ever spent. It powers up instantly, has amazing battery life, and is very portable.
Click to expand...
Click to collapse
Where did you find a RedFly for only $100?? I've been planning to get one, but $200 seemed a bit much.
Celio Redfly
RogueCheddar said:
Where did you find a RedFly for only $100?? I've been planning to get one, but $200 seemed a bit much.
Click to expand...
Click to collapse
Oops, sorry that was a typo. Don't like using the thumbboard for long text. It was $200. However, the new models that are coming out come in 2 flavors. I believe the smaller, more portable model will be under $200. Even at $200, it was worth it and not for oh aah factor either.
yeah I'm not sure why mine won't work. I've downloaded the driver again but it still won't work (although it will on my jasjam which runs wm5)
Is celio redfly a phone or a wireless keyboard?
pinkdiamonds said:
yeah I'm not sure why mine won't work. I've downloaded the driver again but it still won't work (although it will on my jasjam which runs wm5)
Is celio redfly a phone or a wireless keyboard?
Click to expand...
Click to collapse
The Celio Redfly is a larger keyboard and 800x600 WVGA display extension device for your WM phone. You connect your phone to it via USB or Bluetooth and it replaces your phone's display and key entry functions. Plus, connecting by USB allows it to charge your phone while connected. It has no OS, memory or processor of it's own, using strictly what your phone can bring to the party. It's your WM phone, but with keys you can actually type on, and a display you can actually see; plus the ability to attach USB devices like a mouse. It resembles a small very lightweight laptop, and has about an 7-8 hr battery life. Just Google it for more info, my friend.
my keyboard works just fine on 6.1. i use the native built in WM driver. you dont get to use a lot of the functions on the keyboard (apps, ok, send, inbox etc) but it works just fine. and honestly, its worked on every single 6.1 rom i've used. something might be up w/ your keyboard
I'm using my old "Palm Bluetooth Keyobard model#3245W" no drivers just pair and its a "HID" device and thats it. Just type away....
Just no hotkeys or special stuff like that. I like it better because its a "Full Size qwerty keyboard" with numbers across the top.