Related
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
ftp.clubimate.com
yep, thanks
already upgraded to Arabic rom
wardy said:
ftp.clubimate.com
Click to expand...
Click to collapse
Wardy have u got a dopod 818 pro or jammin?....As i have a jammin and was thinking of installing the dopod rom.....Have u tried both roms?
If so which do you think is the better of the 2?
Thanks
Can I use the file to upgrade my Dopod 818 Pro? Has anyone tried it?
linux2001 said:
Can I use the file to upgrade my Dopod 818 Pro? Has anyone tried it?
Click to expand...
Click to collapse
Yes, you can do that but your 818Pro will have European/Australian GSM settings instead of Asian. You need to flash the DopodAsia Extended_rom if you want those Asian settings.
I am in Australia currently, and bought my Dopod in Singapore. I am currently facing the Sleep-To-Death (STD) problem on my Dopod so I am wondering if I should try the imate ROM...
Imate Jamin rom on Dopod 818-Pro (Hong-Kong)
I tried flashing my 818-pro with the Jamin Rom... stoped after 95% (assuming when validating the device ID) and informed that the rom is not for my device... left the 818-pro dead!. My only way to recover was, to flash with MDA compact rom to bring it live again and than load through awizard the 818-pro WWE version from this FTP.
Conclusions:
1. Imate decided to disable an incorrect device???? (perhaps un-intentially).. therefore avoid using the Imate RRU utility.
2. flash NBA through the Awizard utility.
Question how to separate the Extended Rom from the NK.NBA provided ???
Re: Imate Jamin rom on Dopod 818-Pro (Hong-Kong)
Dubi said:
1. Imate decided to disable an incorrect device???? (perhaps un-intentially).. therefore avoid using the Imate RRU utility.
Click to expand...
Click to collapse
I don't think so. I have successfully flashed my Dopod 818Pro with Imate JAMin. However, I flashed it back to DopodAsia ROM because it's not a newer ROM.
linux2001 said:
I am in Australia currently, and bought my Dopod in Singapore. I am currently facing the Sleep-To-Death (STD) problem on my Dopod so I am wondering if I should try the imate ROM...
Click to expand...
Click to collapse
If you still can get your Dopod to the Bootloader mode, you may try to flash it with this Imate ROM. Better than STD I guess. Good luck!
(To get it to Bootloader, press Camera button and reset the unit. Holding the camera button until you see four color bars. Insert USB connector and run the ROM file.)
Khuanchai said:
If you still can get your Dopod to the Bootloader mode, you may try to flash it with this Imate ROM. Better than STD I guess. Good luck!
(To get it to Bootloader, press Camera button and reset the unit. Holding the camera button until you see four color bars. Insert USB connector and run the ROM file.)
Click to expand...
Click to collapse
Thanks for the advice Khuanchai, I might want to try this out, but am worried about getting a failed flash like in Dubi's case. It will be difficult for me to send my 818Pro for repair as there are no Dopod service centres here in Australia.
Do I need to take special precautions before running the update, such as applying the unlock CID option using the aWizard tool?
linux2001 said:
Thanks for the advice Khuanchai, I might want to try this out, but am worried about getting a failed flash like in Dubi's case. It will be difficult for me to send my 818Pro for repair as there are no Dopod service centres here in Australia.
Do I need to take special precautions before running the update, such as applying the unlock CID option using the aWizard tool?
Click to expand...
Click to collapse
Not sure you need to unlock CID in order to flash a new ROM only but it's a must if you want to backup your Dopod ROM. I have done this to backup my Dopod ROM that can be flashed back whenever I want.
I think Dubi has failed because of incomplete downloaded file.
There is a very good information for flashing Dopod 818Pro with Imate ROM at PDAMobiz.com:
http://www.pdamobiz.com/show_news.asp?NewsID=52433&PN=1
Unfortunately, this is in Thai but it's easy to follow if you have some experience on flashing ROM.
Failed to flash Imate rom on Dopod 818
Thanks for the remarks.... however... My phone has been originally Chinese and I loaded the 818pro rom wwe avaiable here on the FTP> however by mistake I flashed it before with an MDA compac rom which installed a wierd Extended Rom which I can't get rid of, unleass I have a good "ship" version. Tried few time to flash the Imate Jamin rom and it quited after 95%. I am currently using the Imate version.. dated Jan 9th. which I was able to finalize with lot's of tricks such as complete the RRU by lading just a radio version.... I think (just feeling) that the Dopod818 pro wwe is better.... however in order to resolve my complete issues and to let you know if it fialed (95%) becuase of Imate or becasue of a strange Extendedrom that I have I need to have access to a "SHIP" WWE Asia version. Placed a request here on the Board but so far no one Uploaded it... Yet.
I can ensure you that My phone is CID unlocked etc. etc.... Tried some RRUs but None could identify the Imate nk.nba rom., while the original RRU of imate failes on 95%.. keep anouncing that the rom is not for me???!!!
Please if one of you have access to the Asia Dopod site please upload a complete "ship" version (English please).
Re: Failed to flash Imate rom on Dopod 818
Dubi said:
I need to have access to a "SHIP" WWE Asia version. Placed a request here on the Board but so far no one Uploaded it... Yet.
I can ensure you that My phone is CID unlocked etc. etc.... Tried some RRUs but None could identify the Imate nk.nba rom., while the original RRU of imate failes on 95%.. keep anouncing that the rom is not for me???!!!
Please if one of you have access to the Asia Dopod site please upload a complete "ship" version (English please).
Click to expand...
Click to collapse
I have backed up my Dopod 818Pro's original ROM (English version) to a BIN file that needs to write to an SD card before flashing the unit. If you want to try, please find a place that I could upload to.
Dopod 818pro dumped file...
Dear Khuanchai please upload it here to uload\818pro....
or just attach a file as a reply to this message... I read the threads of 818pro and I am sure that others could make use of it.... It is very usefull to other users as well.
Thanks you
Does the Jamin's ROM come with A2DP?
http://www.imate.com/t-DETAILS_JAMIN.aspx
Re: Dopod 818pro dumped file...
Dubi said:
Dear Khuanchai please upload it here to uload\818pro....
or just attach a file as a reply to this message... I read the threads of 818pro and I am sure that others could make use of it.... It is very usefull to other users as well.
Thanks you
Click to expand...
Click to collapse
Here is the original Dopod 818Pro ROM (WWE) with instructions. I had difficulty uploading file but finally finished. Let me know if you find the file incomplete.
Cannot attached file but here is the link:
ftp://xda:[email protected]/Uploads/DopodAsia.zip
818Pro bin file.... Corrupted...
Thanks for the efforts, however the zip file is corrupted.... I tried dnload it 3 times, the same file and zip is corrupted... I suggeste please verify that indeed your original file integrity is ok and upload it again. The best is just to attach the file to your message (if you have difficulties to use the ftp...).
Thank you..
does this rom support a2dp...??
kinson said:
does this rom support a2dp...??
Click to expand...
Click to collapse
No, it doesn't.
Hello All,
I'm a newbie in this forum so forgive me if I'm asking something that has been already asked (I've looked but couldn't find it). Does anyone know where I can find the official Qtek S200 roms, I'm hesitating a little bit to upload a non qtek rom just in case something goes wrong. I wouldn't want to end up with a € 600 phone that doesn't work.
Thanks
If you want the WWE version, I think this is the one:
ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
mtrambaioli said:
Hello All,
I'm a newbie in this forum so forgive me if I'm asking something that has been already asked (I've looked but couldn't find it). Does anyone know where I can find the official Qtek S200 roms, I'm hesitating a little bit to upload a non qtek rom just in case something goes wrong. I wouldn't want to end up with a € 600 phone that doesn't work.
Thanks
Click to expand...
Click to collapse
Don't afraid of non-Qtek ROM Qtek is very lazy in update release. I got Dopod 2.15.13 on my born S200. Thу latest Qtek available is as old as 2.9.7.
The ONLY difference between the devices from differend brands is the logo on the panel. Sure.
thanks, I will give it a try
bambacik said:
If you want the WWE version, I think this is the one:
ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
Click to expand...
Click to collapse
This is the latest from Qtek. However, the latest across vendors is from Dopod. To upgrade to Dopod WWE ROM follow the tread: http://forum.xda-developers.com/viewtopic.php?t=49298
Sorry in advance for the question
Just as a newbie.. I got Qtek S200 in German (bought in Switzerland) and want WWE version. I guess this thread shows the right steps. Am i right ? the procedure shown here (with the ZIP file) is good for language change ? Does the S200 will change ALL menus on Win Mobile to English ?
Thanks a lot for your answer !
PD> I saw the commercial JFAWM USB card that claims to be a simple way to do it too. What do you think ? is better for a newbie to buy it to avoid problems ? Thanka again.
Is there a newer ROM from Qtek in WWE or GER?
Upgrade tool says that i need a newer ROM for upgrade - now my XDA Neo is in Bootloader Mode
that qtek ROM is corrupt
I think the Qtek WWE ROM in ftp is the latest from Qtek & if after downloading it can be unzip, then it is not corrupt.
Can anyone enlighten newbie here what's IPL and SPL ?
I think the Qtek WWE ROM in ftp is the latest from Qtek & if after downloading it can be unzip, then it is not corrupt.
Click to expand...
Click to collapse
the file in ftp is an exe not a zip for qtek S200 ROM, which seems corrupt,
is there anyplace to get the shipped qtek ROM?
DJW said:
I think the Qtek WWE ROM in ftp is the latest from Qtek & if after downloading it can be unzip, then it is not corrupt.
Click to expand...
Click to collapse
the file in ftp is an exe not a zip for qtek S200 ROM, which seems corrupt,
is there anyplace to get the shipped qtek ROM?
Click to expand...
Click to collapse
The file in the ftp is in fact an .exe zip file (a self-exploding/executing zip file) where you can unzip it either with winzip or winrar. Try opening it with either one of them.
DJW wrote:
Quote:
I think the Qtek WWE ROM in ftp is the latest from Qtek & if after downloading it can be unzip, then it is not corrupt.
the file in ftp is an exe not a zip for qtek S200 ROM, which seems corrupt,
is there anyplace to get the shipped qtek ROM?
The file in the ftp is in fact an .exe zip file (a self-exploding/executing zip file) where you can unzip it either with winzip or winrar. Try opening it with either one of them.
Click to expand...
Click to collapse
i have twice posted that it is corrupt, you have posted twice that it is zipped, have you unzipped it?
it is corrupt now! it was good in the past.
i have twice posted that it is corrupt, you have posted twice that it is zipped, have you unzipped it?
Click to expand...
Click to collapse
I did not said whether it is corrupt or not. I only said it is a zip file & if it can be unzip then it is not corrupt. I already downloaded it before & like Lui-kim-Su mentioned, it was good in the past but not now.
Anyway, I have a copy of it & I have uploaded the file.
Here's the file: ftp://xda:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
great, many thanks
qtek s200 WWE rom update
I got my s200 in Switzerland. Unfortunately it is in French. in order to upgrade the rom to Eng version I have tried to connect to the server. but
the ftp server site mentioned in yr forum does not work.
what do I have to do to get the latest WWE rom updtae.
jjadut
Can anyone enlighten newbie here what's IPL and SPL ?
Thanks to all
Here is the GERMAN:
http://rapidshare.de/files/27586025/RUU_Prophet_2090732_20907115_020720_QtekGER_Ship.rar.html
Hello,
Can anyone please upload the latest Qtek S200 WWE ROM version?
Thank you!
ftp://xdaupload:[email protected]_2090724_20907106_020720_QtekWWE_Ship.exe
thanks
what's date ?
one question
can i upgrade my imate jamin with qtek rom or dopods rom ?
Am I able to use my previously backed up data (SpriteBackup) when I flash to the a different ROM? Or is the back up useless after a ROM upgrade?
Also, what different with this Qtek ROM?
My s200 runs very smoothly at the moment, dont know if I should upgrade at all.
Any thoughts?
garfi said:
one question
can i upgrade my imate jamin with qtek rom or dopods rom ?
Click to expand...
Click to collapse
As far as i know, yes.
My Qtek was shipped with mentioned WWE ROM (2.9.7./2.9.7.106). It was unstable and slow... After a week of use... Damn!
Now I am on Dopod's WWE 2.15.13.27/2.15.13.121, and feel good, no-more-stupid-soft-resets, feeling much faster and very stable.
If you have some good and stable ROM, I suggest not to change to this one...
i think the same !!!
the new Dopod ROM is the best
here the link :
ftp://xda:[email protected]/Pr...2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
if you need it ! here the NoVendorID crack fron Machinagod
ftp://xda:[email protected]/Pr...13121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
enjoy!!!
make sure you CID unlocked your prophet or you can't flash it 100% back to anything else.
the dopod rom sucked for me (without the extended rom is was more stable than with the extended rom).
i prefer the jamin rom.
difference beetween ?
ship and shipnovendor ?
thx.
one question,can i update my qtek s200 form CHS test rom to this Rom?
yes you can
take rom novendor
Dear friend,
there is someone can tell me how upgrade my XDA neo (german rom)with the ultimate and better WWE rom?
Which is the better english rom?
Which program I have to use?
Someone can help me, please?
I got the same problem as cucchiarellid can someone reply us plz .. ill be very thankful ..
1. download the new Dopod ROM here:
ftp://xda:[email protected]/Pr...2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
2.extract with winrar or whatever the downloaded file and replace the original "romupdateutility" with This:
ftp://xda:[email protected]/Pr...13121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. and run it !!!
FINISH !!!
rodigezstyle said:
1. download the new Dopod ROM here:
ftp://xda:[email protected]/Pr...2151327_21513121_021921_DOP_ASIA_WWE_Ship.exe
2.extract with winrar or whatever the downloaded file and replace the original "romupdateutility" with This:
ftp://xda:[email protected]/Pr...13121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip
3. and run it !!!
FINISH !!!
Click to expand...
Click to collapse
Wrong... The second referencied file has all you need to upgrade, incluning images and NoVendor update utility on place. Just download, extract, run, follow the screens. And be patiend, there some stops during upgrade, looks like nothing happens and all hungs. Just be patient for 10-15 minutes.
Hi all;
Im agree with J-Walker
Just download the Novender and execute RomUpdateUtility
It works fine on my Qtek S200 but how can I change the language because Im French and English is not my speciality ?
Does it exist another ROM in FR?
blacriderv said:
Hi all;
Im agree with J-Walker
Just download the Novender and execute RomUpdateUtility
It works fine on my Qtek S200 but how can I change the language because Im French and English is not my speciality ?
Does it exist another ROM in FR?
Click to expand...
Click to collapse
Oooops... The ROM is WWE, it means it support locales, but the interface is English only. To get French you need French ROM (it's downgrade, not so easy as go up) or some third-party interface localisation pack.
one question, if i upgrade the rom of my qtek s200 i will lose all my data and installed programs?
Thank you
If i upgrade my xda neo to dopod ROM, is there any way to go back to my original xda Neo ROM ? By applying patch from http://www.o2-online.de/o2/kunden/technikundeinst/exclusive/xda/xdaneo/index.html?nidx=1 for instance ..
Hello,
I have just recieved my new qtek s200 with this french rom:
ROM version: 2.9.7.33 FRE
ROM date: 14/2/06
Radio version: 02.07.20
Protocol version: 413.1.03
ext ROM version: 2.9.7.116
Can i upgrade to this qtek WWE rom (RUU_Prophet_2090724_20907106_020720_QtekWWE_Ship)
without unlocking CID first?
Will the new ROM improve the camera function?
thx!
piXie
I have exactly the same version and I am interrested too !
Can you explain me what is WWE and CID?
Thanks a lot !
hi Gazous,
WWE is just... World Wide English ;-) instead of french you will have English.
CID is the vendor lock so you can't install other vendors roms, only roms from qtek in my case.
anyway still waiting for an answer....lol...thats ok i got plenty of time ;-)
cheers
piXie
v2.9.7.116 FR available
Version V2.9.7.116 FR is available on www.smart-phones.be if your have a valid EMEI.
I've tried to install it but after 1%, my pc automatically shutdown.
After that, my QTEK didn't work.
Return to After-Sales services
Another person tried to update and same result...
Daniel
Use NoVendorID reflashing utility and have a ROM of your choice... Search the forum for details...
thx myplate ;-)
my question is still unanswered tho...
Can I install a qtek WWE rom instead of a qtek french rom (my current rom) without unlocking CID or worring that my s200 will die on me?
After all, both roms come from qtek but since one is french version and the other is world wide english version...i'm afraid it will not be compatible...(plz dont tell me i'm a paranoid) lol
Thx again
piXie
omg walker! just saw your post....was it meant for me??
novendorid....is needed only if a different vendor rom is used right??
thx
piXie
ok Walker, lets see if i understood correctly:
1. I have a s200 with a french rom, and i want to change to WWE rom.
2. I downloaded the NoVendorID rom version for the dopod, and extracted it.
3. Should i just run the ROmUpdateUtility and it will install the dopod rom?
4. If yes, what about CID unlocking?? will I be able to install other rom versions later on?
appriciate your help
cheers
piXie
Don't hesitate to read the forum. All the answers are here...
Be sure, all the Prophets are sure identical in hardware. The only difference is the vendor ID and counry ID in the flash. You will newer damage your device, even running ROM for other vendor. My Qtek S200 now has Dopod 2.15 ROM. No problem! You can use WWE or FRA or RUS or CHT ROM and it will work. However, ROM utility won't reflash if it see the vendor is digfferent. One of the good gays has a bit fixed it to make it less strict.
If you afraid of wolves - never go to the forest. If you afraid of consequences - just do nothing forever. If you want to got WWE - just reflash with WWE ROM. Or go to the service and ask the guys to do it for you.
Try first the WWE ROM itself, if it fails with VendorID error - it's possible, run the same with NoVendorID utility. The only one thing to care about - the right ROM. If you try a ROM for 9100 - you will have a problem, but still recoverable, AFAIK. If you do something really stupid, your device becomes a pretty good black toy for kids, just like a real, but don't works ))))
Have a good luck!
lol Walker...you'r always two steps a head of me...
Hi Walker !
your story about the bad wolfes convinced me to go ahead and install ;-)
anyway, it works fine.
thanks a lot
take care
piXie
Enjoy! And have a good luck!