tmobile mms-software after upgrading XDA I with PPC2003 - MDA, XDA, 1010 Software Upgrading

I upgraded my XDA I with the original Tmobile upgrade PPC2003 GER. All works fine. Then i started the Autokonfiguration for Tmobile Germany. One Programm i got was a tool for mms-sending and receiving. When i want to start this Programm an error message occures like "This software is only working on original T-mobile device". What can i do ? Where is the difference between my XDA I and the MDA I ?
My Device-Information shows:
ROM-Version 4.01.19 GER
ROM Datum 03/05/04
Radio Version 3.23.11
Protokoll Version 32S54
Identity : PWA10A2, Pocket PC
thanks for your help !

the difference is only the software
try doing a search for mms composer in the forum it should not have any special relation to any operator of cause you may have to put in the mms settings manualy

thanks for your answer,
using mms-composer is one possibilty. But i thought, when flashing my XDA I with the original ROM of the MDA (T-Mobile, PPC 2003, German), there would be no difference to the original MDA I, and then using the MMS-client-Software (Materna, ANY WAY) from T-Mobile Germany shouldn't make any Problems. When starting the MMS-Software the message "... Software only for T-Mobile Devices" occurs. This means, there must be another difference to the MDA. Any idea ???

Hi,
i have found the solution for my own. Here for all who are interrested:
- the difference between a MDA1 and XDA1 (with MDA-ROM) is the imei-number
- the MMS-Client-software from T-Mobile (Materna, ANY WAY) needs an imei of a T-mobile MDA
- it must begin with 350512... or 350513... following with a serialnumber of T-mobile
that's all :wink:

Related

How can I restore my system to the original states

Hello,
I know that I should'nt have do that, but I need your help.
I upgrade my MDA on the following state :
Rom : 4.01.16 Eng
RSU : 4.21.00
For buisness reson I have to go back to the original state.
Rom : 3.18.01 ENG
RSU : 3.23.00
Unfortunatly I didn't do a Backup
I have acces to some MDA with the originale rom and rsu
My question is how to go back to the originale state, without destroying the other mda with the originale rom? via bootloader?
Thanks in advance
The ROM part is easy, you can get the original 3.18 ENG from the carrier devices site http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
The RSU might be your nightmare especially that you have 4.21 which showed to be the pain for most people here ... anyway, in the same site you will find RSU 3.25 for Qtek ... it's almost the same as 3.23.
Good luck
Biso007 Thanks for you answer,
I look at your link but it seems to be the Qteck version, I really need the officiale t-mobile version.
Is there any way to save the originale one in one of the other phone that I have access and restore to my one?
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
ok I Download the old version on a new phone via OSimagetool to my sd card and put it on my device. working perfectly.
So now I just have to downgrade the radio stack to 3.23.00, where I can find it and how to downgrade?
I download the file here
http://www.t-mobile.at/business/mobiles_arbeiten/MDA/SWupdates/
Looks like it's working, (at least I have the right number at startup)
the only problems that I had it's that rhe rsupgrade was lauch every time I startup, I had to delete the file rsupgrade on startup folder. now it's working like before.
Thanks a lot.
By the way, does it exist a solution in mda to copy contact name to the sim card?
pjfuerte said:
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
Click to expand...
Click to collapse
No, it's PPC2002 and the RSU is 3.25 for PW10A devices (900/1800). I know it coz it was on my device before I replace the mother board with a B-type one.
If you are going to use 900 MHs network in Asia you can keep your current RSU ... I have it on my device and my network is 900/1800 ... other than this you better use 2 phones or get a new XDA II
sebs said:
By the way, does it exist a solution in mda to copy contact name to the sim card?
Click to expand...
Click to collapse
Dealing with the SIM book is a matter of s/w and the device type (XDA or MDA or ... ) has nothing to do with it. You can find many freeware s/w to deal with the SIM entries.
ok thanks a lot, do you just have the name of one of this freeware?
try this http://www.pocketgear.com/software_detail.asp?id=7496
don't work for me
Requirements: Pocket PC 2002("Not Microsoft Phone Edition or Pocket PC 2000)
Click to expand...
Click to collapse
always looking for gsm phone.
Say choose flexport extra if you have running voice gsm installed on this device, but i dont have the option.

Strange upgrade...

Guys, I have O2 XDA2 with ROM 1.66.00WWE, ext ROM 1.66.165, and bootloader 1.06,
I want to upgrade my XDA2, so I downloaded an i-mate ROM version 1.72.126,
and using ER2003edit I changed the carrier from CDL to O2,and leave all parameter as it is...
but when I run himaupdate.exe, it said country id error,ce checksum error, etc,etc...
then I change the carrier gain to CDL, still no luck...
last, I repeat again the first step above, but I didn't use ER2003edit, so the ROM is original (still in CDL carrier, right), voila, it passed the error message, but I'm affraid to click upgrade button since mine is O2 XDA2 not imate...
is it ok to upgrade?isn't it strange that my O2XDA2 choose CDL carrier for upgrade?
please help...
bump?!
UPGRADE ????
darkcell, my friend.
your conclusion is ; this is failure hardware.... not only rom, so, that's a big problem !!!
how opinions from o2 club, jakarta (ivan or niki).
thank's
afaik eredit2003 is only capable of changing operator id's (=country id) for the Extended ROM.
Please see the upgrade instructions on this site on how to make the iMate rom work with your O2 XDAII

Unlocking M600 from orange

Has anyone managed to sim unlock the orange m600 unit
I have tried the lokiwiz from another thread but it didnt work.
rom version is 2.10.1.22 wwe
radio 02.07.20
extended rom 2.10.1.107
operator version 13.10.1.107
thanks
When you do manage it, do share the ROM!
willing to hep
IF anyone is working on this i would be willing to help
Me too ....
I can't unlock my phone to use my two SIMCards
HELP me ...
Please
(It's ORANGE FRENCH SPV M600 !)
Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ones there is no solution yet.
:?
We just have to wait for an updated version of LOckiwiz or aWizard tools.
Ok, had a modicome of sucess with this, converted it to a Imate Jamin and then used the wizard unlocker to sim unlock it. Its works fine for voice but have not got the gprs to work yet. Although i am using a dual sim and this may be the problem.
will let you know as things progress
Has anyone tried the Imei check site (http://www.imei-check.co.uk/m600unlock.php) I know you have to pay for this, but that is still better than having your phone locked to orange (nothing against orange, just that I have an o2 contract...)
IMEI Check
Works ok unlocked mine there yesterday took less than 5 mins
Ok, thanks, i will stand a new version
Right, let me get this straight...
"Lockiwiz can only unlock your Prophet device if your Rom version is 1.XX.XXX. For the new AKU2 ROMS (i.e Orange M600 ROM) there is no solution yet."
If this is the case, then can we use A-Wizard or the hacked romupdateutility to FLASH back to a pre-AKU2 ROM and then use Lokiwiz to unlock the device, and then flash back to a 'latest AKU2 ROM' (Dopod one is latest and greatest atm) and continue to have a SIM UNLOCKED device???
Please can someone try this? I get my M600 in a week and need to be able to unlock it. Am in the USA atm and need to use a T-Mobile SIM in it.
Appreciate any help.
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
The only problem i have is i managed to disable the gprs connection detection. I think its something to do with the radio update and not quite getting the conversion right. I have been following the instructions from this and other sites and might have made a mistake.
Hopoing t sort this when i get time
I don't understand ???
You can UNLOCK or not ?
You want my ROM for check it and understand why it doesn't work ?
popeyesfx said:
No lokiwiz can unlock the newer version, i have one and its done it fine, the problem is to achieve this i had to convert the unit from orange to either a dopod or an imate jamin.
Once flashed with the new rom lokiwiz quit happily unlocked the sim.
Click to expand...
Click to collapse
thanks popeyesfx, but which ROM version did you flash to and how did you do it? Was it the new AKU2 Dopod rom specifically?
Did you have to use A-Wizard first to change CID or did you use the hacked romupdateutility to flash the rom from Orange to Dopod/I-mate?
Thanks
I used the modified update util of the ftp site and then used the latest jamin rom from the ftp site, this updated fine and i didnt get any operator errors.
I then used lokiwiz and it unlocked the sim fine.
just as an aside, the problem with the gprs turned out to be a thing with the orange unit itself. I tried a non flashed on and it has the same problem (doesnt show the connection but will connect to it fine when triggered by other software)
there is another link on here that gives you a full discription on how to convert the unit just cant remember it (old age im afraid lol) :lol:
Which ROM to install on an Orange SPV M600?
Just got a new Orange M600, herebelow is the device info;
ROM version: 2.10.1.22 WWE
Rom Date: 2/16/06
Radio Version: 02.07.20
Protocol Version: 413.1.03
ExtROM version: 2.10.1.107
Operator Version: 13.10.1.107
IPL 2.10.0001
SPL 2.10.0001
I used machinagod lokiwiz 0.3 to SIM unlock my SPV M600.
Now;
1) Will my phone be SIM Locked again if i did a Hard Reset?
2) Which ROM is the latest and best and can i install it on IPL/SPL 2.10.0001? If yes, then how?
merci pour l'astuce
Free Unlock Tested Prophet Spv M600 Pm300 From Amena
HI...
It's simple and the process is free ...
Only thing you need is the program Lokiwiz03a and no more. . .
1. Copies Cert_SPCS.cab, EnableRapi.cab to spv
2. install in the spv; 1. Cert_SPCS.cab, 2. EnableRapi.cab in order. . .
3. running the LokiwizMsl.bat which give you the code which you enter with not accepted simcard. . . enjoy. . .
work on all version and all spl . . . tested on ipl 2.15.0001 spl 2.15.0001 g4 chip . . .
Big thanks Juliocesarmaster ! Worked 1000% !
Juliocesarmaster that worked a treat thanks

XDA Orbit, ROM uploading problem

All, after reading all published threads on this forum and following all described instructions I still have problem with uploading new ROM to my XDA Orbit.
I unlocked my new XDA Orbit with Imei-ckeck.co.uk in order to be able to flash another ROM on my device. Everything went smoothly and the unclocking process was completed successfuly. The problem is that my equipment still doesn't accept another ROM, getting the same error message (INVALID MODEL ID) during the uploading process as before the CID was unlocked. So, I don't see any difference here after unlocking my XDA. Can you please help me to find out where the problem is, what I'm doing wrong?
Details:
My Equip.:
O2 XDA Orbit
ROM-version: 1.25.207.1 GER
ExtROM: 1.25.207.101
I'm trying to upload the new HTC Artemis, ROM-version: 1.12.405.1 WWE, ExtROM: 1.12.405.101 published on this web
Thanks in advance for all your inputs.
quite simple,
the roms you are trying to install are test-roms, just as the full name states it on the wiki.(afaik diffrent bootloader)
use the tmouk or the dopod rom and you are off in a zip with an english rom from either tmobile or the dopod p800w( by the way the rom i prefer- by far faster working than the earlier tmobile roms!!!)
greetz
Thanks Thormdac!
Does it mean I cannot use the standard HTC ROM, never? or is there any way how to change the bootloader? If I would upload the mentioned Dopod ROM, would that support my WLAN which is now working properly? I would rather use the O2 WWE version, but cannot find it anywhere.
Thanks again, you're very helpful!
i havent seen any other orig rom updates then the ones from tmouk and dopod. since the dopd p800w originally comes with wlan it should work on your wlan equipped machine. on my hero it doesnt cause it doesnt have wlan chip onboard.
we`ll have to see about other e.g. htc roms, but definitely are the test!!! roms not working
I've tried the recommended Dopod rom version, but got the same error message (Invalid model ID). Have no ideal where the problem is.
dont know then, contact imei check and /or rerun the unlock routine
what about tmouk rom. works all fine by me, dopod and tmouk!
yep, I know, I did...see my first post. I think I did everything exactly as described here, but still it doesn't work.
I can try the Tmouk rom wwe, but I am not sure whether it supports my wlan.
Is there anything else in the process I've overlooked? Has anyone else tried to change rom in O2 Orbit?
i'm also wondering about the difficulty and sheer viability of this rom change, cause i only have the option of purchasing a german orbit, but definitely would need an english rom with wifi

Dutch T-Mobile MDA Compact III to English!

TylerDurden1337 said:
I've been reading the forums, but I cannot find the solution to my problem. I just bought my T-Mobile MDA Compact II (HTC Artemis) in Dutch and I would like to change the language to English. I've read there's a T-Mobile ROM UK, but where can I download it? And how to install? If I connect to the FTP server the folders in Artemis are emtpy except for the EXT Rom folder. But the size of the rar's is a little low, not like I experienced with updating my rom on my Magician before. Those rar's were about 40-45MB. Anybody wants to help me please! If the thread is allready open somewheren, I apologise, please PM me then...
THANKS!!!
Click to expand...
Click to collapse
Edit: I read some more, got little more information, did some things. Yesterday I sim/CID unlocked my T-Mobile MDA Compact III trough imei-check.co.uk (respect for this guy!!), and now I can use it with my own carrier. Now that the simlock and CID lock is gone, I would like to change/update the rom to an English version. I don't mind the T-Mobile ROM, I only care about the English language. If it's possible to put an HTC ROM on my device, I would prefer that, but not completely necessary. What ROM should I use, because I heard that the Dutch version is the only one WITH an WiFi chip? Can someone point me in the right direction? In the FTP account I can only see the ext rom, I found this rom: HTC_1.12.405.01_026790_WWE_SHIP. Should this work with my current configuration?
query
i have exactly the same problem and the same question .
did u did it or still looking
i read all the wiki and most of the thread .but no solution.
i found some rooms wwe but not for t mobile .and becuz of wifi problem i dont want to upgrade it to these version.
only need english roms from t mobile
plzzzzzzzz
T mobile English Original Rom
Hy
I've found a lot of link for my MDA Kompakt III like ...
What i found ...
WM5 original from tmobil
http://www.tm-phonedownloads.com/dm_compact3_sw.html
WM6 WWE "bepe "rom
http://rapidshare.com/files/68188228/Artemis_0409_bepe_0.53_Full.rar
Be carrefull NO WIFI "built in" on artemis 110 from T Mobil ...
Enjoy

Categories

Resources