Strange upgrade... - MDA II, XDA II, 2060 General

Guys, I have O2 XDA2 with ROM 1.66.00WWE, ext ROM 1.66.165, and bootloader 1.06,
I want to upgrade my XDA2, so I downloaded an i-mate ROM version 1.72.126,
and using ER2003edit I changed the carrier from CDL to O2,and leave all parameter as it is...
but when I run himaupdate.exe, it said country id error,ce checksum error, etc,etc...
then I change the carrier gain to CDL, still no luck...
last, I repeat again the first step above, but I didn't use ER2003edit, so the ROM is original (still in CDL carrier, right), voila, it passed the error message, but I'm affraid to click upgrade button since mine is O2 XDA2 not imate...
is it ok to upgrade?isn't it strange that my O2XDA2 choose CDL carrier for upgrade?
please help...

bump?!

UPGRADE ????
darkcell, my friend.
your conclusion is ; this is failure hardware.... not only rom, so, that's a big problem !!!
how opinions from o2 club, jakarta (ivan or niki).
thank's

afaik eredit2003 is only capable of changing operator id's (=country id) for the Extended ROM.
Please see the upgrade instructions on this site on how to make the iMate rom work with your O2 XDAII

Related

XDA2 bought in Holland and now in Australia

I need an expert! I downloaded the RUU172126 WWE imate.exe file from iMate and tried to do an upgrade on my new 2nd hand XDA2 which runs on ROM 1.60.00 WWE. It will not load as of course the country code is not correct. Dummo didn't think about this when he purchased the unit. Do I do nothing or is there someway around this?
there is mate!
download ER2003edit.exe or xda2nbf.exe and change the operator..... since the language is both WWE for your upgrade and device...
only the operator would differ, that be O2 and I-mate...
so you have to change the upgrade's characteristics....
read ony DCS's posts on fix upgrades and downgrades
goodluck
Thanks very much Z man. I have one more request. can you direct me to where I can download the exe files?
http://wiki.xda-developers.com/wiki/CompleteTools
here you go mate!
T mobile to iMate conversion
I am experiencing the 'country code error' and will use the ER2003 edit tool. What i dont get is how to change the country/operator as I dont have a code. imate does not exist in the drop down menu. Do I simply type i-mate in and proceed? Help me Zman or somebody I am out of my depth!

I-mate WWE to Qtek FR?

Hi,
> Newbie: first post <
First, I want to apologize if that kind of topic had been already posted (sure it has been posted!)
I've bought an I-mate JAM in Dubai and upgraded it with the 1.06 WWE Rom proposed on the Club I-Mate site in March. I decided to change that rom in purpose to have my Jam totaly in french but I don't know how exactly because there's a lot of different roms.
Furthermore, I've tried several times to flash my "precious" with the first Fr rom proposed here but after having done the reset (after doing "d2s 80000000 04000000 in romupdate.exe"), ActiveSync do not recognize the device and I can't continue (must be guest partnership, right?).
Should I downgrade that 1.06WWE rom to an older WWE Rom first?
If not, what is the precise procedure?
Already asked? Just give me the link.
Thank you very much.
PS: 'search' function already done.
No Idea? Still waiting for an advice.
here try this file to upgrade... just place this file inside the extracted ROM of your choice and run it ...... you will get a country ID error... don't mind the error just click ok and run the file again (notice that your device will be in the bootloader mode and you should keep it that way).....
and you will find the ROM you want in the ftp...
hope that helps.....
Thanks Papa Docta,
I had this file but deleted it like a noob...thank you!
So I can download the last Qtek FR rom instead of my actual I-Mate WWE rom, fix the country id with the file, and upgrade...
Seems to be easy...TOO easy? :?
yep... download the ROM u like, doesn't have to be the imate wwe and enjoy......

o2 xda neo / on the edge of panic

Hello everyone,
I have on order a o2 xda neo, I was told by the salesman that
the manual and os were in english.
I have now found out that the neo is a german version of the
i mate jamin. I feel very stupid.
What does this mean in real life terms? Will it have a german
interface that I can't read? will I have to flash the os?
anyone?
thanks,
Chance
O2 XDA Neo
Hi.
I have O2 XDA Neo too, it's one week now. It's from Germany so everything was completely german. I flashed the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID.zip from here, it's english version.
But first, try to search for english localization of WM5. I you won't find it then flash the new ROM. The problem is, there is no solution to go back to O2 German ROM nowadays for IPL, SPL version 2.15.0001. You will surely get the new version. But in month or two, there will be tool to unlock the phone to be able to flash lower versions of ROMs. Read the forum, it's priceless source of information.
Thank you Median for your reply, I have heard many horror
stories about flashing ROM,but if I have to I will, So what your saying is
the ROM on the OS is different from the WM5 and that I have to flash both.
I appreciateyou taking the trouble to answer me.
chance
The file is the Dopod's ROM, it's newer version then O2's and includes english WM5. Flashing was abslolutely no problem on my Neo. It takes about 10-15 mins to flash. Some say 30 mins, but for me it was quick. And the best thing you can do when flashing ROM - don't watch it, it doesn't like it. You know, it's intimate time for the device
median said:
The file is the Dopod's ROM, it's newer version then O2's and includes english WM5. Flashing was abslolutely no problem on my Neo. It takes about 10-15 mins to flash. Some say 30 mins, but for me it was quick. And the best thing you can do when flashing ROM - don't watch it, it doesn't like it. You know, it's intimate time for the device
Click to expand...
Click to collapse
1) Do you have to CID unlock your Prophet before flashing to the Dopod Rom?
2) What was your SPL / IPL prior to flashing?
3) Does flashing change your SPL / IPL?
4) I have Orange SPV M600 with IPL 2.10.0001 / SPL 2.10.0001 and someone told me that i need to CID unlock first to be able to flash ROMs.
Is this true?
5) Also i do not see the M600 original ROM available for download, how do i go back to orange ROM if need be? Will it be possible if orange made their ROM available for download?
Pls help.
I've just flashed my O2 Neo bought in Germany, ver. 2.09.0001. I used the ROM available in the forum,
RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_Ship-NoVendorID
and it worked FINE. GREAT! I bought the telephone unlocked in Germany from O2, didn't needed to unlock CID. My GSM card from my brazil operator worked fine. Wifi too.
Thanks, I will try the Portuguese ROM now.
I have a question, if I flash the O2 neo to english version, the home-zone function will be lost or not?
It will be Lost but u can install the homezone needed files from the ext.rom afterwards. These Files should be available on the ftp Server.
AND:
I did also upgrade my German O2-XDA NEO to the mentioned Dopod rom - And you can also go back to the (older) Neo Rom later.
I do not know why but it is possible to downgrade from Dopod to the newest O2 rom, maybe because both are 2.15.x.x.?!

How to change the cingular rom to original O2 mini s rom?

Dear all,
Please help me.... I bought a mini s recently, which is loaded with the latest cingular English rom. I would like to change it to the O2 uk rom, I have tried various way such as downloaded the O2 uk roms in the FTP site and update it to the device. However, error messages poped up every time and ask me to get a newer version of update tool.
The reason for changing to O2 uk rom is that I want the bulid-in O2 softwares such as O2 active, O2 plus.
Please kindly advise me how to change the rom. Thanks in advance.
Use Lokiwiz to perform a CID (carrier identification) unlock. This should remove all your error problems when performing the rom update.

Vodafone WM6 for Herald is available!!!

Now Vodafone WM6 for Herald (VPA Compact IV) is available!!! You can download it at Vodafone Homepage under Support by clicking on VPA Compact IV. In the overview it is not listed. Only by clicking on the Device in the list. Then you must type in you S/N an accept the terms of condition to download the update.
Error 270
Hello,
now i have a second problem. My Herald was bricked in case of wrong Rom installation in the past. Now Vodafone ha released the new rom, but if i want install that i get the Information that there is an update error 270 an the progress stopped directly after 1% of installation. Now i think the problem is that the updater can not read the old informations from the phone and there are corrupted datas from the old wrong rom i had installed in the past on it. Now my Question is, how can i delate the old datas on the phone to install the new Vodafone Rom? Is there a way by MITTY or some other tools?
I hope anyone couldt help me.
Thanks
WM6 Upgrade failed / for no reason / Vodafone Image corrupt?
Well, my WM6 upgrade of the Herald stopped after 1% with error 270 (image corrupted)
anyone had succes with this? I made quite a few ROM upgrades so far with different devices from the same computer. USB cable is working perfeclty. Herald had a hard reset before. So there shouldbe absolutely no reason why the WM6 upgrade should not work.
Any sugestions?
Skynet, did not read your post, had only read first entry of the thread.
I got Vodafone on the line - they will call back since the regular support person does not even know "WM6" as a epxression
For all: I suppose the signed ROM file from the updater is corrupt. Shame on Vodafone. I took me 1 hour to test every single aspect of the uprade process...
Skynet007 said:
Hello,
now i have a second problem. My Herald was bricked in case of wrong Rom installation in the past. Now Vodafone ha released the new rom, but if i want install that i get the Information that there is an update error 270 an the progress stopped directly after 1% of installation. Now i think the problem is that the updater can not read the old informations from the phone and there are corrupted datas from the old wrong rom i had installed in the past on it. Now my Question is, how can i delate the old datas on the phone to install the new Vodafone Rom? Is there a way by MITTY or some other tools?
I hope anyone couldt help me.
Thanks
Click to expand...
Click to collapse
The new ROM on the Vodafone pages (at least in ther german version) is
a) the same for Hermes (VPA Comapct III) and Herald (VPA compact IV). That cannot be right!!!! It´s not the same modell
b) it´s not a german but a swiss ROM
I tried to install it on a Hermes. It must be CID-unlocked to work because it´s a german ROM branded by swisscom for Hermes
Even with a CID-unlocked Herald you cannot install it.
I can´t understand why Vodafone puts that ROM on their page. It must be a mistake!!
Let´s wait for a corrrection of it
official Vodafone statement!
i spoke with Vodafone Business Germany yesterday. they confirmed its a corrupted installer. they cannot remove it quickly (its a Big Company and it was friday....) so they told me to wait until tuesday... (written on a wm6 , sorry for the grammar)
apple*
is there already a WWE or a DUT rom available or only the GER rom?
if so, plz give me a link
new one is on!
;-)
How do you identify it as a new one? Did you upgrade succesfully?
** CONFIRMED **
Got a phonecall from Vodafone Technical Support for Business Clients: Vodafone VPA compact 4 German WM6 upgrade DOES WORK now!
(The upgrade for VPA compact 3 still does not work..)
Applestar said:
How do you identify it as a new one? Did you upgrade succesfully?
** CONFIRMED **
Got a phonecall from Vodafone Technical Support for Business Clients: Vodafone VPA compact 4 German WM6 upgrade DOES WORK now!
(The upgrade for VPA compact 3 still does not work..)
Click to expand...
Click to collapse
And I assume you also have a German Mobile....?
Working
... check my signature Yes.
Again: Upgrade DOES WORK now. I will update my signature for the Herald right now
Applestar said:
... check my signature Yes.
Again: Upgrade DOES WORK now. I will update my signature for the Herald right now
Click to expand...
Click to collapse
Update is not working on a dutch vodafone herald. So will have to wait
sdamion said:
Update is not working on a dutch vodafone herald. So will have to wait
Click to expand...
Click to collapse
Sorry, but it cannot work on the P4350 or the VPA comapct IV as it is a ROM for the hermes (HTC TyTN), which is a complete different device. so it´s not a wrong installer but a wrong ROM.
On my HTC TyTN it is working perfectly.
Post the ROM
I'm waiting for a Dutch Vodafone ROM for a long long time now. I'm even willing to try a GERMAN Vodafone ROM.
But (there is always as but) my partnumber isn't recognised as a GERMAN phone, so no downloading for me.(http://member.htc.com/ruudownload/Vodafone_HermesWM6SnCheck.aspx)
Please post the ROM in the uploads or somewhere.
Hacked it
Nothing a little SQL injection couldn't fix. Will try to RUU it and will upload it...
Fehler [294]: UngÜltige VerkÄufer-id
The German Vodafone ROM isn't oke for my Dutch Vodafone HTCP4350. Will upload the file... But how/where?
Hello
Can somebody share the extantion ROM cabs for the installation of the networksettings of vodafone or tell me how I can get them?
Thanks in advance
Tommy
tommysrocket said:
Hello
Can somebody share the extantion ROM cabs for the installation of the networksettings of vodafone or tell me how I can get them?
Thanks in advance
Tommy
Click to expand...
Click to collapse
Nothing?
Regards, Tommy
In a moment I will post the dutch vodafone rom here!!!
Here it is, vodafone dutch rom!!!
http://rapidshare.com/files/68589031/RUU_Herald_VF_NL_4.21.172.1_4.1.13.44_02.94.90_Ship.rar

Resources