SD flash without radio?? - MDA, XDA, 1010 Software Upgrading

Hi,
I have SD card with rom on it and I installed it but it's the same because I don't have any radio on the XDA. What I have to do now to install the radio? There is no connection between the PC and the XDA.

more info
hola Tonya,
may be you should provide more info what you are trying to do as it is not very clear from your post.
ps haha nali imashe xda2 bre...kyw e toia locknat xda1 ;-)
batkata

more info
hola Tonya,
may be you should provide more info what you are trying to do as it is not very clear from your post.
ps haha nali imashe xda2 bre...kyw e toia locknat xda1 ;-)
batkata

Re: more info
Icy says:
instalnatia xda1 e na himika i sled kato mu go sysipah se opitwam da go oprawia
Icy says:
bez uspeh
Icy says:
i za towa 100 pyti te pomolih za pomosht no ti ne otgowariash
Icy says:
za kwo se habia kato pak nema da otgoworish
twa batka e ot messengera kakto sam si se setil

Hello to all,
The same trouble with me, while trying to upgrade RSU, i interact the phone and now it is dead. Now when I do hard reset, it goes to wallaby boot loader v 5.15 but after a while shows GSM error, when I press action key it try to turn on GSM, but shows fail after that. After soft reset, it shows QTEK on screen and then windows style came on screen, without top bar, for start. it accept time and owner information also. If I press action key and then calender button it goes to allignment also, and did allignment procedure, and after that nothing. Can u please tell me how to bring it back on normal operation. It is q tek 1010.
Thanks in advance.

Related

MDA Vario has stopped seeing my Memory card - Please help

Hi,
My 2gb memord card has worked fine but recently it has stopped working in my MDA
It works fine on the pc but the phone still tells me the card isnt inserted.
The card was bought off ebay but I fear it is the phone. I don't have another card to test in the phone.
When the card is removed or inserted the light flashes on so the phone recognizes it is being inserted.
Any help is appreciated.
Thankies.
MC_Bob
With the adapter it doesnt actually work in my mums IMATE Jam, so it's probably the card.
Za 2K nema šansi da uzmeš nešto extra kvalitetno. Taj gigabyte mi deluje interesantno jer ima i horizontalni skrol koji moze itekako da bude upotrebljiv sa excelom. E,sad, činjenica je da bežični miš nikada ne moze da se približi žičnom po pitanju preciznosti, ali, ja bih se recimo pre odlučio da uzmem bežični iz mnogo razloga, a pre svega portabilnosti...odluka je na tebi, a moj glas bi išao ka m715, koji ipak malo više košta u odnosu na spomenuti budžet...
Sent from my GT-N7000 using Tapatalk
mc_bob said:
Hi,
My 2gb memord card has worked fine but recently it has stopped working in my MDA
It works fine on the pc but the phone still tells me the card isnt inserted.
The card was bought off ebay but I fear it is the phone. I don't have another card to test in the phone.
When the card is removed or inserted the light flashes on so the phone recognizes it is being inserted.
Any help is appreciated.
Thankies.
MC_Bob
Click to expand...
Click to collapse
Flash ur sd card with any other flashing tool at ur machine
Make sure u don't have virus over ur pc
O,w its common
And if its nt working, hard reset ur phone to factory
If still not
Hard spl>rom>flash>go for a 6 or 6.1 with good flash memory
╰⌒╮ツ
Sent from my HTC Dream G1 using xda premium

[Q] unrevoked 3.21 on wildfire and power on problems

hello,
I used unrevoked 3.21 on my italian wildfire (nobrand) with the htc update 1.25.405.1...
After rooting, without new ROMs but with the default one, I have problems when wildfire is powered off...
Even if the battery is full, if I connect it to the power switch, the LED switch on to RED and doesn't became GREEN.
AND I cannot power on the cell (with or without power cord connected)!
I have to remove battery to power on!
IS there a solution?
thank you.
The problem is known and I think there is still no solution. It seems it's the fault of unrevoked.
Sent from my HTC Wildfire using XDA App
it is a unsolved problem with unrevoked, Charging the phone while it is off will make it unable to start it unless you remove and reinsert the battery.
BTW i have a fix for it(kind off): DO NOT CHARGE THE PHONE WHILE IT IS OFF
CrimzonEyed said:
it is a unsolved problem with unrevoked, Charging the phone while it is off will make it unable to start it unless you remove and reinsert the battery.
BTW i have a fix for it(kind off): DO NOT CHARGE THE PHONE WHILE IT IS OFF
Click to expand...
Click to collapse
ahaha good fix
however , when it is off, it is realy charging or not?
there can be any problems with battery? overcharge for example?
however, in this forum, I have read (and I cannot find it anymore... ) that the problem is clockwork recovery and someone suggested to install the original recovery to fix it.
Is it really possible? doing this, can I keep su/root mode?
thank you
I think there is another problem rooting wildfire with unrevoked; sometime (after some minutes my cell is in stand-by mode) switching on the display I cannot see the WIFI icon on the notify bar (as if it was disconnected).
Some seconds after, the icon come back
girello71 said:
ahaha good fix
however , when it is off, it is realy charging or not?
there can be any problems with battery? overcharge for example?
Click to expand...
Click to collapse
Have been able to charge untill green while the phone is off with the unrevoked, after that i unpluged the charger, removed/reinserted the battery. And started up.
Have never heard that unrevoked have caused overcharge.
girello71 said:
hello,
I used unrevoked 3.21 on my italian wildfire (nobrand) with the htc update 1.25.405.1...
After rooting, without new ROMs but with the default one, I have problems when wildfire is powered off...
Even if the battery is full, if I connect it to the power switch, the LED switch on to RED and doesn't became GREEN.
AND I cannot power on the cell (with or without power cord connected)!
I have to remove battery to power on!
IS there a solution?
thank you.
Click to expand...
Click to collapse
Ciao Girello....In base al nik e a quanto descritto sul tuo cell sei italiano.....Ho comprato il WildFire da poco e visto che Froyo non arriva avrei pensato di rootarlo.
Però ho ancora qualche dubbio e con l'inglese non sono tanto ferrato e quindi se posso chiedere a te qualke info.....A quanto ho capito leggendo in giro nella rete l'operazione di rooting fà decadere la garanzia, ma se eseguo questa operazione e poi decido di tornare al firmware originale, la garanzia secondo te è ancora "operativa"? Nel caso decida di tornare indietro qual'è la ROM giusta per il "nostro" cell? Ultimissima domanda....Come ti trovi col cell dopo averlo rootato...Cosa c'è in più o in meno?
Grazie Ciao
girello71 said:
hello,
I used unrevoked 3.21 on my italian wildfire (nobrand) with the htc update 1.25.405.1...
After rooting, without new ROMs but with the default one, I have problems when wildfire is powered off...
Even if the battery is full, if I connect it to the power switch, the LED switch on to RED and doesn't became GREEN.
AND I cannot power on the cell (with or without power cord connected)!
I have to remove battery to power on!
IS there a solution?
thank you.
Click to expand...
Click to collapse
hi....
again, is there any solutions for this issue ?
i downloaded a rom from shipped.com and tried to reflash it, but the process always stucked in the middle.
Yeah this bug is annoying. I have been considering using an RUU to unroot because of this problem. I hope someone works out a fix for it.
Hpez said:
Yeah this bug is annoying. I have been considering using an RUU to unroot because of this problem. I hope someone works out a fix for it.
Click to expand...
Click to collapse
Did you succeed to unroot your WF ?
I tried to reflash using Asian RUU but the process stopped in the middle, and said something like I should get a suitable ROM.
Rgds,
Andika
Hi guys, i have the same power on issue, there is a way to contact or inform the developer's team to fix this bug?
Ciao ragazzi, anche io ho questo fastidioso problema dell'accensione, c'è un modo per mettersi in contatto con il team di sviluppo di unrevoked per informarli del bug, e per poterlo quindi correggere?
Hello,to eliminate this problem you can remove unrevoked?
I tried to flash my wildfire with Froyo but unrevoked is always installed, with this problem of red light ...

Rooting HTC Hero GSM 2.1-update-1 (3.41.61.31)

Hi lads,
So I've been trying to root my HTC (Hero GSM 2.1-update-1 (3.41.61.31), originally Orange Spain, but unlocked by code) for few hours now, haven't managed yet. All the articles I've found about rooting this phone seems to be quite old and none seem to be more recent than the latest OTA update they've sent.
Even the latest version of Androot (1.6.2 beta 5) doesn't seem to work; I keep getting a Failed ! No ~~~ Fu goo ~~~ seemingly clueless error.
Found some more hardcore ways to do it, but then again, all of them quite old and no one confirming if for the current version - I don't want to end up with an expensive paperweight
I want to root it in order to install the latest Froyo ROM (Oh, and if anyone have serious reason for opposing to the villainrom 1.7, I'd appreciate a headsup)
Please, could anyone refer me to the definite how-to-root-this-thing?
cheers mates,
f.
Hi!
Are you from Spain? I am and I spent all night trying to root or upgrade to some kind of distro, but there was no luck...
I had the same firmware and update as you, and... at the end I'll get it! :]
The thing was just go to htc page to download the "latest" drivers for your HTC Hero Orange (important to be orange cuz if not it won't be able to download -also it would ask for a serial number, just write it on-).
What you downloaded now is just to downgrade your cellphone and override all newer updates... Then your phone will be back in time to 1.5 (dino-droids!)
Yeeeey! I did a big party after that ¬¬
Well... then all you have to do is follow the steps for a common htchero unlock... you can apply androot, and put some roms and that...
En mi caso, me ha quedado un Hiro! de la ostia! :] va sobradamente más rápido que antes.
good luck!
sergimiral said:
Hi!
Are you from Spain? I am and I spent all night trying to root or upgrade to some kind of distro, but there was no luck...
I had the same firmware and update as you, and... at the end I'll get it! :]
The thing was just go to htc page to download the "latest" drivers for your HTC Hero Orange (important to be orange cuz if not it won't be able to download -also it would ask for a serial number, just write it on-).
What you downloaded now is just to downgrade your cellphone and override all newer updates... Then your phone will be back in time to 1.5 (dino-droids!)
Yeeeey! I did a big party after that ¬¬
Well... then all you have to do is follow the steps for a common htchero unlock... you can apply androot, and put some roms and that...
En mi caso, me ha quedado un Hiro! de la ostia! :] va sobradamente más rápido que antes.
good luck!
Click to expand...
Click to collapse
Hi there,
I've got the exact same problem (Hero GSM 2.1-update-1 (3.41.61.31), originally Orange Spain, but unlocked by code)
Could you give me a bit more detail how did u downgrade the phone. where and how did u install the drivers?? I did not find the orange drivers in the htc site.
Gracias por la ayuda.
Estoy mas perdido que Marco el día de la Madre.
Hi I unrooted my phone on tmob uk with the official New rom
I have the file but you must have ADB installed on your computer, do a search and let me know
or just follow this as I did
http://www.villainrom.co.uk/forum/showthread.php?1930-How-To-Root-The-2.1-RUU-or-OTA-Update-For-The-Hero
tfn said:
Hi I unrooted my phone on tmob uk with the official New rom
I have the file but you must have ADB installed on your computer, do a search and let me know
or just follow this as I did (sorry not allowed to post links)
Hi, bit of a learner on this rooting milarky but I want to root my Hero which is a UK T-Mobile on 2.1 update1.
Would I need to follow the guide that you posted? Only I have read about a gold card method.
Thanx in advance
Click to expand...
Click to collapse

Possible S-OFF HBOOT 1.01

Saw this today on an Chinese forum, this guy clames he found a solution to downgrade hboot 1.01 so you can S-OFF
I DID NOT TEST THIS BECAUSE I HAVE NO HTC LEGEND ANYMORE SO TRY AT YOUR OWN RISK
I truely hope this works as clamed for you legend users
And don't flame if it didn't work, as said before if I could I would of tested it before posting but I can't
It's translated by google but isn't easy to understand
Stated in other forums, reproduced, author of 367,175,652. Have little trouble themselves 6 is s-on.hboot1.01, can not change the first screen, the system can not remove the program. Today happened to see this post. To turn over. A master first experimental look feasible? Us a good suit. If the forum has the same post, please delete the administrator to help Um
recently felt fatigued on the G6, and want to change the first screen, I heard that as long as the S-OFF, or Gold on the line, I bought, it is the S-OFF, I excitedly in the past to replace it, and unfortunately did not succeed, show CID INCORRECT! this time I know I might get a white card machine, and hateful JS!
So determined to put forward their own true S-OFF, but did not expect this trial, spent a day before I finished fast (good thing I know some basic knowledge of LINUX, and BAIDU, GOOGLE great help of God), then release tutorials, and high HBOOT downgrade method, and the process of brush HBOOT to note, in particular, may be white card machine may encounter problems, I will do some shows.
Open brush:
1 First from http://alpharev.nl/, 1.8 ALPHAREV download mirror.
ps: the first, only supports HBOOT1.0 about, and as far as I know G6 eligible only HBOOT 0.43, it is generally not the HBOOT the need to consider a downgrade (downgrade tutorial I am going to write);
ROOT support only over the second The ROM (listen HTCDESIRE version of TX that best fitted BUSYBOX, but I do not mind this look myself); BUSYBOX Download: http://www.coolapk.com/download/apk/2755/stericson.busybox/
Third, it is best not to use open technologies like D2EXT ROM, the original best
2 this mirrored discs, CD or bootable USB can not do with a bootable USB-dials it, in fact, USB also very fast.
ps: remember to write in the mirror it BZIMAGE. into BZIMAGE, otherwise the time will be displayed with the boot disk can not find the bzImage.
3. The next step is to use boot disk to start the computer, then press operation on the computer screen can be a (and there are three steps, of which two steps are necessary hand speed, the tragedy of the G6 ah, I heard G7 can be fully automated, BS's, where the two steps mentioned in the note).
4 installation is complete, ROOT enjoy permanent happiness, saying that ugly clown picture).
Downgrade tutorial:
HBOOT1.01 the first students to download http://www.dkmdesign.dk/custom_roms/131/LEGEIMG.zip, then put it in the memory card, restart or shut down access to HBOOT interface (you can hold off the next volume keys, and then press the power button to start), HBOOT will automatically detect, verify the package, by asking whether the upgrade will, of course, select YES, and after brushing is HBOOT 0.43 a.
HBOOT1.00 students as far as I can not directly verify the downgrade (with heroes know, want to teach me), you need to upgrade to HBOOT1.01, then by the above method to downgrade. As for the upgrade to HBOOT1.01 is simple, as long as you install an original 2.2 ROM on it, attached here Download:
2.2 Hong Kong version of RUU: http://u.115.com/file/t5b1aab6bf
2.2 platform version RUU: http://u.115.com/file/t5e890140
Note:
1. If you can not detect your machine, please note that your machine is ROOT, ROOT does not please ROOT; If your machine has been also detected ROOT , you may hand the white card machine, and white card machine G6 brush ALPHAREV the ISO may not detect your machine, because it is detected inside the ALPHAREV.SH MID to test the machine, if you MID and the MID SH different default program will be treated as unable to support the machine, and can not brush. Because I do not know how to process the Brush screenshots so I can probably explain here under the general process of amending:
In ALPHAREV 1.8iso the ALPHAREV.SH, it is the default MID = PB7610000 to detect whether your machine is a LEGEND of If not, then sorry, your machine is not supported. But not worry, this can be changed, can not be detected in the computer display when your machine (I remember that English is YOUR PHONE IS NOT RECOGNIZED OR YOUR PHONE IS NOT SUPPORTED THIS TIME) while holding down the CTRL C, then the #,
then enter vialpharev.sh,
come in out of the picture, you can use PAGEDOWN, PAGEUP page down keys or turn the line, and then find the MID = PB7610000 this line, then press X to change it ALPHAREV detected at the beginning to your MID, hold down the SHIFT last colon, and finally press X, back to the terminal.
Finally, the terminal re-enter alpharev.sh, re-brush machine.
This time, your machine can be detected.
2 in Brush 3-step process, where the first two steps are necessary hand speed, the third step is automated, you just do not pull line or off, is generally not a brick, in theory, only the third step it may BRICK! The first two steps to pay attention when he appeared (after the point you are ready for any key, and keep an eye we remind you press the power button into FASTBOOT), this time the first phone you want to make sure you select fastboot option (ps: please Do not press the power button, or you come back), followed by free press any keyboard key, heart and silently count about 5-6 seconds, then press the power button, so your computer if you press the power button there, you just press it, the general You can not successful, which probably takes a few seconds to press the need for us to comprehend their own.
First time writing a tutorial, there is no picture really embarrassing, tragic, ah, please bear with it
Click to expand...
Click to collapse
OMG.. need to try this..
though I cant understand the instruction..
Any link to the original forum?
Maybe some other guys can translate better than google translator..
and some of the links is not working..
i think i'll give it a try.But i'm definitly not the first person who will do this...
oneyard said:
OMG.. need to try this..
though I cant understand the instruction..
Any link to the original forum?
Maybe some other guys can translate better than google translator..
and some of the links is not working..
Click to expand...
Click to collapse
Here is the link
From what I read in the comments there is that there is allot of flaming on the post creator so maybe it's not working or idk
404
http://www.dkmdesign.dk/custom_roms/131/LEGEIMG.zip
Do you have a mirror of this file?
Please fix the mirror :/
I have a HTC Legend HBOOT 1.01.0000 with vodafone spain
I don't know so much about how to become S-OFF my legend.
I think I can downgrade the HBOOT to 0.43 an do it, but if i update the S-OFF will still be there?
Anyone know more about this topic?
I just found the post, I cannot mirror the file since I don't have it
The original post creator is talking about downgrading the hboot to 0.43, if you guys get to hboot 0.43 you can just use alpharev to S-OFF
But as said before the translation to English is like Chinese to us (ironic is it)
any news?
Did anyone try this possible S-OFF on a Legend 1.01.000?
8 Sorry for this. i've just registred
---------- Post added at 08:23 PM ---------- Previous post was at 08:17 PM ----------
7 i have the file. must post 8 before i can give outside link
---------- Post added at 08:31 PM ---------- Previous post was at 08:23 PM ----------
Here it is: ttp://dl.dropbox.com/u/39715602/LEGEIMG.zip
put a "h" in front of link.
found here: ttp://android.zone.it.sohu.com/forums/viewthread.php?tid=6785904
I've not tried this method yet.
---------- Post added at 08:39 PM ---------- Previous post was at 08:31 PM ----------
A Google translation of china site:
Brush recovery method is to sd card formatted as FAT32 format, download the attachment me rename LEGEIMG.zip into the SD card inside.
Then press the start button to enter the volume increase under HBOOT mode will start automatically prompted to Brush. Follow the prompts to select yes start brushing machine.
Brush recovery interface between the first view is shown HBOOT Legend CVT SHIP S-OFF can use this post to provide the recovery, or can not brush.
ENG S-OFF of the students can not use the card the way brush brush Recovery, Recovery brush must rely on the computer or the phone's internal flash_image procedures. ENG S-OFF of a student if the RUU after the brush, the machine locked up immediately. Again, ROOT.
The SHIP S-OFF, students can use the card the way brush Brush. Even out the latest RUU after OTA or can easily upgrade and downgrade, because after brushing RUU, is still the S-OFF.
Uhhmm.. anyone tried? I can't really understand the instructions...
The file should be on the sdcard and then reboot to bootloader?
And after that the legend should have 0.43 and a ENG S-OFF bootloader?
Dumb kind of instruction. Ordered XTC Clip - made S-OFF with it. On the result reported here.
Did anyone try it?
It is possible to downgrade from HBOOT 1.01 to 0.43 in the HTC Legend?
As far as I understand is this just for wiping your recovery to the default... and you need s-off to do that
It's sucks!!! There is no method to became S-OFF!!
There is no method to downgrade HBOOT 1.01 to 0.43!! (only with the box)
There is no way to do with HTCdev!!!
I think HTC forget about all the HTC Legends!!!
Funny thing is that they (HTC) released unlocked bootoaders for Wildfire and Desire. Legend probably won't get one.
I've kinda wonder why...
Sent from my Legend using xda premium
Then tweet to @HTCDev that they should also support the HTC Legend.
Or contact them per Mail.
I already did it but never got an answer
fabi280 said:
I already did it but never got an answer
Click to expand...
Click to collapse
Surprise, surprise!
Been there, done that.
I cannot understand why too...
---------- Post added at 02:19 AM ---------- Previous post was at 02:13 AM ----------
More unlocked bootloader but not for HTC LEGEND...
IN ENGLISH:
HTC Adds Bootloader Unlock Support For More Devices - Desire Z, Aria, Droid Incredible, T-Mobile G2, Status, And ChaCha
If you didn't know, HTC has promised to provide bootloader unlock support for all devices released after September of 2011 as well as many others released before, and they have been keeping good on that promise with added support for many devices over the last few months.
They're still going strong, and added several more devices to the list earlier today.
There you have it, the newly supported devices are the HTC Desire Z, ChaCha, Aria, Droid Incredible, Status, and T-Mobile G2. If you own one listed above, you can head on over to the HTCDev website to unlock your bootloader now.
As always, you're warned of the potential harm you can do to your device with an unlocked bootloader, and it is strongly recommended that only experienced users proceed.
Click to expand...
Click to collapse
IN SPANISH:
HTC libera más bootloaders, esta vez HTC Desire Z, ChaChaCha, Aria, Droid Incredible y Status
HTC libera más bootloaders, esta vez HTC Desire Z, ChaChaCha, Aria, Droid Incredible y Status12
Estamos en un época donde se distingues dos tipos de compañías: las que no dan un soporte eficaz en Android y se arriesgan a perder clientes a un largo plazo y los que empezaron con Android y están aprendiendo que molestar a sus clientes no hace otra cosa que convencerles de pasarse a la competencia y deciden dar un buen soporte e intentar enmnedar los errores del pasado.
En este segundo grupo se encuentra HTC, que tras tener un inicio agridulce con Android bloqueando los bootloaders de muchos dispositivos en el pasado, ha decidido no volver a bloquearlos y a lanzar las herramientas necesarias para desbloquearlos sin necesidad de complicar a los cocineros de ROMs para que se dequien especialmente a pulir las ROMs para los diversos terminales.
Hace unas semanas ya se liberaron los terminales Wildfire S, Wildfire, Salsa, Merge y Desire, y ahora HTC parece dispuesta a otra ronda de terminales para que puedan ser personalizados más fácilmente. Esta vez nos encontraremos Desire Z, ChaChaCha, Aria, Droid Incredible y Status, permitiendo así que los usuarios de estos terminales puedan entrar de lleno en el mundo de las ROMs.
Vía | Android Police
En Xataka Android | HTC desbloquea los bootloaders de Wildfire S, Wildfire, Salsa, Merge y Desire
Click to expand...
Click to collapse

[Q] mobile data shuts down

hello guys i recently installed the new version of 'foxhound' rom 3.4,
anyhow, ever since, i got this wierd problem which
every time i turn the screen off, the data mobile shuts off,
when i turn the screen back on the phone turns the data back on (most of the times.)
anyhow, i've tried my best, reinstalling the rom, shifting from WCDMA to LTE/GSM/CDMA or GSM/WCDMA nothing helps.
btw at my last foxhound version (1.5 or something) it used to happen only at night so when it did i had to research my mobile network
any clues ? :\ thanks in advance
devonz said:
hello guys i recently installed the new version of 'foxhound' rom 3.4,
anyhow, ever since, i got this wierd problem which
every time i turn the screen off, the data mobile shuts off,
when i turn the screen back on the phone turns the data back on (most of the times.)
anyhow, i've tried my best, reinstalling the rom, shifting from WCDMA to LTE/GSM/CDMA or GSM/WCDMA nothing helps.
btw at my last foxhound version (1.5 or something) it used to happen only at night so when it did i had to research my mobile network
any clues ? :\ thanks in advance
Click to expand...
Click to collapse
Spanish yoigo?
Enviado desde mi GT-I9500 usando Tapatalk 2
yo habló un poquito de español pero no que suficiente para explicar esta problema en español..
pero fluente de ingles
devonz said:
yo habló un poquito de español pero no que suficiente para explicar esta problema en español..
pero fluente de ingles
Click to expand...
Click to collapse
No, I mean, I was asking if you were in Spain and with the carrier Yoigo, because they are having exactly the same non solved problem. I see you don't... so it is not due to the carrier...
Here are a lot of people like you, maybe you can use Google translate:
http://www.htcmania.com/showthread.php?t=715569
Enviado desde mi GT-I9500 usando Tapatalk 2
solution
anyway some guy (kobine @ iandroid.co.il) told me that there's a problem with 4.3 roms (i9505 only)
so in order to fix the DATA shutdown issue you have to replace the modem to mj5 or newer modem.
http://d-h.st/QUu here's a link for mk8, instructions: for ---i9505 ONLY---, unrar the md5 file, load it in odin to the phone section (NOT PDA) and press start. gl thanks anyway.

Categories

Resources