Replace the camera - JAM, MDA Compact, S100 General

Hi all,
i just bough an i-mate Jam and it's the first time that i post a new topic here. I'm doing it because i find my new phone (is it a phone? ) wonderfull except for one thing. I guess u all know what i'm talking about: its crappy camera!
I mean, i already own a digital camera and don't really need this one, but why making it 1.3 Mpix if it can't even do a decent photo...
I tried it inside but the light was too low and the picture was too dark, i tried it outside in a perfect sunny day but there was too much light and the picture had some pink areas :? , i even tried to take a photo of a document (maybe that was its pourpose) but couldn't read it cause the picture was blurry...
Now, it's obvious that HTC (or who made it) had used cheap lens and sensor and my question is: can we replace it with a better one?
I ask u this because i know ppl that have done it to other phones; it's a quite simple task if the camera is not soldered on the main board, but i don't wanna loose my warranty to try to do something that maybe can't be done...
So, since i bet that there is already someone that have disassembled his Magician :roll: , i'm here to ask:
- is the camera soldered or just plugged into the main board?
- is it hard to remove the case?
Maybe someone would like to try it or maybe i will if i get enough support :lol:
Show me your interest, cheers

XDA cameras
Yep, it's sad isn't it? Bloody great device with an eye-wateringly bad excuse for a camera (if you think 1.3 mpix is bad, try the XDA II camera!) all before they even sorted out bluetooth, wi-fi, headsets etc. typical O2 headless chicken approach, get used to it. We've been putting up with this crap for years! Happy New Year! Hope this is the year when O2 finally gets 'The Plot' !!!!!! Oops! There goes another flying pig! :wink:

The photo quality is actually good in daylight, but very bad in night mode or dim light.
I think a new firmware could improve it greatly.

They can maybe kidnap a developer that worked on Sharp phones :lol:

tinto said:
I tried it inside but the light was too low and the picture was too dark, i tried it outside in a perfect sunny day but there was too much light and the picture had some pink areas
Click to expand...
Click to collapse
The MDA Compact, as sold by T-Mobile in Germany, comes with an upgraded Camera application (v 2.70, build 17736) in the Extended ROM. I don't know how much difference this makes, but you may want to try. That ExtROM is available somewhere here...
Also, did you try to change the "Mode" setting (not sure if this is the correct name - on my German MDA Compact, it's "Umgebung") in the Camera settings? If you change it to "Night", interior shots will have visible noise, but be at least not underexposed. And changing this setting to "Daylight" will help a lot for outside shots. On mine, the default was Tungsten ("Neon"), which is totally inappropriate for almost all conditions.
Cheers, Daniel

jacoch said:
They can maybe kidnap a developer that worked on Sharp phones :lol:
Click to expand...
Click to collapse
Well, i just took a look at some pictures taken by a Nokia 6630 and belive me those are photos!!! Incredibly high definition and wonderfull colors... Not a picture is blurry and even those taken indoor are beautyful; could be easely compared to those that come from mid-end digital cameras (except for the fact that they are 1.3 mpix only). I would definetly kidnap the guy that implemented the 6630 camera...
I belive anyway that such a result is not only obtained via software but mostly due to a high quality CMOS and lens. If changing those in my Jam allowed me to obtain half the quality of 6630 pictures i would be more than happy.
tadzio said:
Also, did you try to change the "Mode" setting (not sure if this is the correct name - on my German MDA Compact, it's "Umgebung") in the Camera settings? If you change it to "Night", interior shots will have visible noise, but be at least not underexposed. And changing this setting to "Daylight" will help a lot for outside shots. On mine, the default was Tungsten ("Neon"), which is totally inappropriate for almost all conditions.
Click to expand...
Click to collapse
I tried that thx, but i still consider those pictures of a too low quality for a 1.3 mpix. I'll try to flash my Jam with the extended ROM but i'm a total noob in flashin PDAs and don't have a clue from where to start (i'll learn anyway, don't worry . Just two questions: what's the difference between extended ROMs and "normal" ROMs? If i flash my Jam with the German extended ROM do i get a German OS?)

I'll try to flash my Jam with the extended ROM but i'm a total noob in flashin PDAs and don't have a clue from where to start
Click to expand...
Click to collapse
I have not tried to install the German Camera update to an English device, so there's no warranty that it'll work. But to install that Camera update, you don't have to flash anything! Just get the Camera*.cab, copy it to your device via ActiveSync, and execute it there. It will install itself.
Unfortunately, this .cab does not contain uninstall info, so if it doesn't work, you can't simply uninstall it. You'll either have to use special tools, or perform a Hard Reset.
Just two questions: what's the difference between extended ROMs and "normal" ROMs? If i flash my Jam with the German extended ROM do i get a German OS?)
Click to expand...
Click to collapse
All HTC PocketPCs have (logically, not necessarily physically) three Flash memories: the main ROM that contains the OS and Radio Stack, then the Extended ROM where network providers can put their customized apps, and lastly the user-accessible "Storage".
When you first switch on your device (or do a Hard Reset), the OS looks for AutoRun.exe in the ExtendedROM, and that program installs several .cab files from the ExtendedROM. If you perform a Soft Reset immediately after the short tutorial that executes after each Hard Reset and before the Today Screen appears, the ExtendedROM is not executed and remains visible. You then can decide which .cabs you want to install - just use a file explorer to browse the ExtendedROM. But I disgress...
Most programs in the ExtendedROM just add some branding and network-specific settings, so you should not install German T-Mobile ones on your device. Some others (Intellidialer, Intellipad) are also available in English, so again don't use the German ones. The Camera may be the only one not available in English, but maybe we should first try to find out what the differences really are between the built-in and the ExtendedROM Camera app. Which version is your Camera app?
Cheers, Daniel

Thx a lot for your explaination, i think i got it now
Now, my camera app version should be 1.0.0.1 (i had to get it through ActiveSync since u don't have a property menu in the FileExplorer, right?), so i belive it's the very first release (or at least the second if the first was 1.0.0.0). What's yours?
Could u post a picture taken with your camera so i'll do the same and we can compare them? (i suppose u have the German camera update)
Thx again for your help :wink:

tinto said:
Now, my camera app version should be 1.0.0.1 (i had to get it through ActiveSync since u don't have a property menu in the FileExplorer, right?)
Click to expand...
Click to collapse
That number surprises me, and I don't think it's the correct one. Where exactly did you look? Try the following: start the Camera app, tap the toolbox icon to go to the settings page, then click on the "Extras" menu, then on "Info" (names are from my German app, may be slightly different on your device). What is the version number displayed on that page?
Could u post a picture taken with your camera so i'll do the same and we can compare them? (i suppose u have the German camera update)
Click to expand...
Click to collapse
Attached are two pictures (packed into one ZIP file) - one taken with my MDA Compact, the other one with my Ricoh Caplio R1. It was a rainy and dark day, so both are somewhat dull. It's true that despite the darkness, the MDA picture is still a bit overexposed. It was taken with the mode set to "daylight". And of course the difference between 1.3 and 4 MPixel and the difference in the quality of the lenses is very evident. But I think the quality is in line with what can be reasonably expected.
Oh, btw, I did not compare myself, but I heard people say that if you set the resolution to less than the maximum of 1280*960, the picture quality increases. This could be due to some post-processing of the image. I always use 640*480 when taking photos with the MDA Compact.
So, how does the quality of your pictures compare to mine?
Cheers, Daniel

tadzio said:
That number surprises me, and I don't think it's the correct one. Where exactly did you look? Try the following: start the Camera app, tap the toolbox icon to go to the settings page, then click on the "Extras" menu, then on "Info" (names are from my German app, may be slightly different on your device). What is the version number displayed on that page?
Click to expand...
Click to collapse
idd was the wrong one
anyway i upgraded today to the italian ROM and the camera app version is 2.70 build 17975. Let me know if it is the same
tadzio said:
So, how does the quality of your pictures compare to mine?
Cheers, Daniel
Click to expand...
Click to collapse
I gotta say it's almost the same. Anyway i didn't know that with lower resolutions the quality of pictures increases. All the picture i took before where in 1280*960.
Now i'll show u something i discovered:
i attached 2 pictures taken today before the ROM upgrade; i know they are ugly but was the first thing i had in my view . The picture number 1 is a street where i live during a rather sunny afternoon. Notice that everything bright is shown with a pink tone (and in every other picture taken by MDA compact that i've seen it's the same). Now look picture number 2; that's the same picture with levels, contrast and colors automaticly set by Photoshop. IMO picture quality is much higher...
So my point is: after all the MDA camera is not that bad, what really sux is the sofware that reprocesses the pictures, as maverick stated above...

tinto said:
anyway i upgraded today to the italian ROM and the camera app version is 2.70 build 17975. Let me know if it is the same
Click to expand...
Click to collapse
You now have a newer one, see my first post in this thread.
Notice that everything bright is shown with a pink tone (and in every other picture taken by MDA compact that i've seen it's the same).
Click to expand...
Click to collapse
Oh, that! Then I think I have good news for you: the Camera app has settings to correct such problems. In the Settings Page, tap on "Extra", then on the first menu entry (in German it's "Ansicht einstellen") - not the "Options" menu entry! There you can set contrast, brightness, hue, gamma, crispness etc.
Although these settings are under "Ansicht" ("View"), they do affect the pictures you take! (I have to admit I only just discovered this. Otherwise I would have let you know a lot earlier, of course...)
Hope that helped!
Daniel

tinto said:
tadzio said:
contrast and colors automaticly set by Photoshop. IMO picture quality is much higher...
Click to expand...
Click to collapse
what do u mean by automatically set by photoshop ??? how,d u do that :$ ??? plz explain.....thanks
Click to expand...
Click to collapse

zairyaab said:
what do u mean by automatically set by photoshop ??? how,d u do that :$ ??? plz explain.....thanks
Click to expand...
Click to collapse
my version of photoshop is in italian so i dunno the right name of the menu but i'll try to explain...
Go to menu Image (3rd menu from the left), then Regulations (the second string from the top) and then click on Automatic Levels, Automatic Contrast and Automatic Color. Anyway u can do a better job manually if u know what to do. My example was just there to show that the pictures of our lovely Compact could be slightly improved with a simple piece of software.
tadzio said:
Oh, that! Then I think I have good news for you: the Camera app has settings to correct such problems. In the Settings Page, tap on "Extra", then on the first menu entry (in German it's "Ansicht einstellen") - not the "Options" menu entry! There you can set contrast, brightness, hue, gamma, crispness etc.
Click to expand...
Click to collapse
i've seen those too when u told me where i could find the camera app version. I've tried to change some but i don't really see a big improvement; anyway i'll try again tomorrow with the daylight. I'll let u know the results (and let me know yours :wink: )

I guess there should be some1 developing 3rd party camera software don't you think?

ramram said:
I guess there should be some1 developing 3rd party camera software don't you think?
Click to expand...
Click to collapse
I hope so. I'll try to take a look
For what concerns the camera settings, i've made some tries today in a perfect sunny afternoon and i found that i could improve a little the overall photo quality. Anyway the generalized pink tone is still present and can't be removed (u can turn it in a cyan tone but still not white; i belive u should be able to use decimals in the settings to remove it, cause with a hue of 5 the picture has pink while with a hue of 4 it has cyan tones).
My settings for a perfect sunny day are:
Contrast 6
Brightness 5
Gamma 5
Hue 5
Higher crispness gives u better details under the daylight, lower gives better quality in low light conditions.
Cheers

XDA II CAM SOFTWARE ALLLLL CRAPPP !!
i haf noticed one thing....n i think alll the xda II or guys usin himalaya device shud try this toooooo.....wat ive noticed is....i taken out a pic from ma xda II on default settings wid out changin gamma or contrast or sharpness.....wid pic resolution of 480 (thts the max it has FOOOOOK) ne wayz...i sent the pic to ma frnd via bluetooth on his nokia 6600 n the other frnd on some new siemens set....n guesss wat.....the freaky pic was loookin as if i toook it out from a DIGI CAM......not just on the damn cellll but wen they downloaded from the celll to their pc's too then also the damn pic had a totallllly diffff color n resolution then wat ma xda II was givin me.....so i am sure there has to be something wid the software tht generates the pic n reproduces it on the lcd....caz after takin a pic out from xda II n sendin it to frnds cell n burnin it out on the comp it was just awesome wat does tht MEAN ????? SOFTWARE PROB FOR SURE..... wat do u guys say ????

anyone tried the thing i mentioned above ??

I have noticed one thing, I think all the XDA II or people using Himalaya device should try this too, what I've noticed is, I took out a picture from my XDA II on default settings without changing GAMMA, CONTRAST or SHARPNESS.... with picture resolution of 480x640 (that’s the max XDA II has) any ways after taking out the picture I sent the picture to one of my friends via Bluetooth on his NOKIA 6600 and the other friend on some new SIEMENS Cell and guess what ??? the picture was looking totally different as if someone took it out from a DIGI CAM not just on the cell but also when they downloaded it on their computers the resolution and colors (graphics) was totally different then what my XDA II was giving out.
So I am sure there’s something to do with the software that generates the picture while sending it out on the Desktop Pc or LCD of the Handheld’s we are using.
What do you people have to say about this ?
Hope the grammar is OK for you guys to understand now

CAmera Version
Hello, I am a newbie in this area. I recently bought an I-Mate Jam and was immediately dissatisfied with the performance of its camera. I read that the German ROM cab file works better. Could you please tell me where I can find this cab file?
THanks

I have the JAM, bought it 2 weeks ago. The camera version is 2.70, build 18177. I would say the pic quality is mediocre for 1.3MP camera. Sometimes I get white spots in the pic too.
Maybe as someone above said, the processing is doing something odd. However I personally suspect that its a cheap camera and cheap lens.
Also, I wouldn't be suprised if its NOT really a 1.3MP camera. Maybe they have that "1.3MP by software enhancement" crap and that's its really a VGA camera. That would be my guess.
Anyway, lets face it, we didn't buy this device for the camera. If the Jam had no camera, I would have paid the same price for it as a PDA/Phone of this size. THAT's why I bought it, not for the toy camera.
I see the Nokia 1.3MP camera and it IS better, but you know these things are still basically toys. When I want a picture I use my Panasonic DMC-FX7, which is about the same size as the JAM and has 5MP and a kick ass picture.
When they make a phone camera that is at least 4MP and has an 3x optical zoom lens, give me call. Becuase that is the point when there is any value in the camera that would make me leave my real cameras at home. Until then I dont think I really care about these toy-class 1.3 MP cameras. Its not worth the trouble to even worry about it. That would be me stressing over the video quality of my digital camera - its a gimmick.

Related

I-mate Jam Camera patch from ClubiMate

Here is the new camera patch from clubimate.
Place the cab file anywhere on your phone and then install it.
I havent tested it out yet so not sure if it improves or not.
maverick_uk said:
Here is the new camera patch from clubimate.
Place the cab file anywhere on your phone and then install it.
I havent tested it out yet so not sure if it improves or not.
Click to expand...
Click to collapse
According to reports on compactjam forums, it does.
*what* does it improve?
picture quality? or software function?
didn't improve anything for me... just added more white dots!!!!!
As far as I can tell (after a quick test) it doesn't improve anything on the MDA Compact.. In fact, it makes things worse: more grain/distortion..
The patch improves the responsiveness of the camera when the shutter button is pressed. Settings to improve the sensitivity of the camera under normal light conditions are also modified by this patch.
It realy did this on my Swedish QTEK s100 ..
Thx..
On my XDAII Mini
One thing I note is that it has increased the response time between buttoning and shuttling.
Here are two photos taken before and after the patch. As for the improvement. You can judge for yourself, I think the color had changed to be reddish.
Dir, maverick_uk
Thx....
Thank u very much

HTC (wizard or more) CAMERA TWEAK WORKING

Increase camera frames per second
This tweak will let you increase the frames per second of the video camera to make more fluent movies:
HKey Local Machine\Software\HTC\Camera\ReParam\MP4Large (or Medium or Small).
Change the FrameRate value
in HKey Local Machine\Software\HTC\Camera there are a lot of options for the camera capture , framerate, bitrate, time to write and much more..
what sort of value will it work?
But, Wizard have only small and medium capture options!
Wonderfull if can capture as large (320*40)... but I think is not possible because have a low CPU speed.
the standard value is 10.. i have heard that above 19 it is laggy .. so i have it on 19 frames, and i think the high option for capture video can be unlocked in some kind of way in the registery.
cpu speed is one thing but I think that memory speed can also be bottleneck for better quality video...
less frames and better video quality should be no problem, only thing is how to get it unlocked. im still trying. anyone interested
Newbie Question
Is there a limit on the video lengths that the Wizard/K-Jam/MDA/Qtek9100's can record up to? Or can it record unlimited lengths of video as long as there is memory space to save it to....?
on the wizard it is unlimited; depending on your memory space. if you take a look at the registery you can change a lot of things, i think you can even set a limit
take a look here "HKey Local Machine\Software\HTC\Camera" with a registery editor, if u guys don't have one, i can post it. or any other apps with ©®á©K$. :lol: just keeping the PDA scene alive. :shock:
can someone PLZ make and send me a backup of his HTC Wizard working "HKey Local Machine\Software\HTC\Camera" whole registery folder. (export option) i F***** up my registery trying to tweak it without making a backup of it now i can't use my camera :shock: :shock: :shock:
Here you go, Hey is ther a way maybe you can get it to focus more
i reinstalled my rom lost all my tweaks.. but o well the cam is working. ~hmm i had done something and my audio was gone and i couldnt open any settings as well, anyway thnx . i have a t-mobile camera fix wich disables the blue camera snow effect and maybe focus fix. ill send it
thanas said:
i have a t-mobile camera fix wich disables the blue camera snow effect and maybe focus fix. ill send it
Click to expand...
Click to collapse
I'd like to see that. I hate the quality of the camera. If you have something to make it better I can't wait.
2 different t-mobile camera patches ( they really work )
this one is older :lol:
it is very weird but not all wizards have the same camera quality, i don't mean that qtek 9100 is different than a mda vario, but sometimes even the same variant. i have a mda vario (latest qtek rom with camera patch) and it takes good pictures, a friend of mine has the same phone rom and patch and his pictures are VERY blurry compared to mine.
this seems to work. How can i see the difference?
Thank you! My camera quality in low light was horrible! It works great now.
jwzg said:
Thank you! My camera quality in low light was horrible! It works great now.
Click to expand...
Click to collapse
What patch version?
Thanks
New version....

crap camera

is there any way to improve the pictures that the wizard takes even in good light the pictures are dull and blurry
Well, if you have an SD card installed, goto the options screen and set them to: Superfine, 1.3MP or above resolution, JPEG, and always have the flash on no matter what. Thats about the best that you can do to improve the Wizards camera i'm afraid.
Not necessarily true mate. The flash doesn't work in every lighting condition and you can improve the hardware performance through some more software tweaks/upgrades. The speckle fix removes that irritating snow problem for the most part and the camera cab should increase the overall picture quality easily
http://rapidshare.com/files/141897144/Camera_s.zip.html
Well, smack me in the ass! I had no idea that there was anything else! I have asked the same question before, and gotten the answer that I gave! Well me Kenzeru!
thanks but i tried them and its the same crappy camera
Lmao ashasaur the thing is those cabs are supposed to be already integrated into the rom's but since they're not so well known the rom cookers don't always include them. But as in jinxie's case, it also depends on the rom and which camera soft you have in it. This is the older version of the camera patch
http://rapidshare.com/files/142068667/Signed_TMO_CameraDriverPatch.sa.cab.html
I've noticed on some rom's it functions better then the newer one I first posted. Theirs also Fariah's camera files. I don't know if they have a cab file for it, but if you use total commander you can copy and paste over the system files you have on your wizard. I gotta look for it though, when I find it I'll post it too...
Sorry I've been crazy busy of late, but... better late then never lol...
http://rapidshare.com/files/145599259/faria3.zip.html

Omnia i8000 Camera settings

hi,
Can any 1 help to get the best pictures from Omnia i8000..
It has 5mega pixels cam, but the pictures are not that good.. may be i need to make some changes in the camera settings...
Can NE1 here help me with the best camera settings to get best pictures from 5megapixs
on the dialer press
*#2470#
this will bring the camera firmware, update
xfox said:
on the dialer press
*#2470#
this will bring the camera firmware, update
Click to expand...
Click to collapse
But where is the update? and what's the password?
ajhvdb said:
But where is the update? and what's the password?
Click to expand...
Click to collapse
pass: 1234
This doesn't appear to do anything well at least not on mine just says don't need to fw update although it seems to come to this conclusion fairly rapidly where would the updated files come from.
indoor pics= sucks
outdoor pics = great
For Indoor shoots, use appropriate White balance settings.. and that sud work..
no update needed... well i didnt bought this phone for its camera.. for that my n85 is perfect.... but it would be great if the camera had i litle more quality...
I'm new to the B7610 and actually Samsung in general. I never seen this before where you update camera firmware separately. Kinda weird.

increase camera bitrate/frame rate

Hi all,
I found that compared to the HD2, the camcorder function of the S200 is VERY bad, basically very blurry when there's motion. I've tried searching the registry for something that determines the bitrate/fps of video but couldn't find anything definitive.
Does anyone know a way to increase the quality of the camcorder?
I think there is little you can do about.
The camera of neotouch is very poor and so is video recording... It's a flaw u'll have to live with if you stick with the neotouch...
doubt it...the camera just sux..
Xakep from acer-club.ru find the answer -
Camera from 1.002c is faster then from 3.003c(b)!
acer-club.ru/Foto-Videokamera-s200-t461-page-360.html
Don't work with EzInput - just switch to other keyboard before starting camera.
capture mode: "Photo" or "video", don't try "anti-shake" - it's not work with this..
Deleted because of the error.
I try it on your manila rom and official 3.003c, it works.
Student_of_Russia said:
I try it on your manila rom and official 3.003c, it works.
Click to expand...
Click to collapse
Yes, I know. I didn't mean that there was error in the Camera app, but in my posting. That's why i deleted my post.
Ok
Thx for your rom's, it's really good..
i tried that mod and it works flawlessly, camera recording is fluent as it should have been since day one.
there is just one single bug : shutter sound cant be disabled eventhough i ticked the option to disable it.
is there any work around ?
thanks for that mod btw
riotman said:
i tried that mod and it works flawlessly, camera recording is fluent as it should have been since day one.
there is just one single bug : shutter sound cant be disabled eventhough i ticked the option to disable it.
is there any work around ?
thanks for that mod btw
Click to expand...
Click to collapse
Just rename the file "ShutterSound.wav" in the Windows folder or delete it.
LOL thank you for this patch, you can really appreciate the improvement!! (form very crappy, to ammm... not really bad)
Thank you very much!
Thanks for the cab, seems to work very well.
Also pushing out the little plastic lens protector in the back cover seems to improve things as well, mine had marks that couldn't be cleaned off it
yep, i did the same
The plastic lens decreases the picture quality very noticably.
Also decreasing the light value reduces the chances that pictures are blurry
Thanks for sharing. It really improved a lot.
goooooooooooooooooood
With regards to the camera I found the following. If you have SPB shell active and you press the camera button to activate the camera, it also presses the fist item on the spb shell screen (in my case the clock or depending on the screen a contact or widget adjusting screen). This doesn't happen with WM standard UI.
I find it strange that nobody else noticed this. I use the stock acer 3.003c rom and have this problem with spb shell 3.5.3,3.5.4 and 3.5.5
Anyone else noticed this?
hello
epdm2be said:
With regards to the camera I found the following. If you have SPB shell active and you press the camera button to activate the camera, it also presses the fist item on the spb shell screen (in my case the clock or depending on the screen a contact or widget adjusting screen). This doesn't happen with WM standard UI.
I find it strange that nobody else noticed this. I use the stock acer 3.003c rom and have this problem with spb shell 3.5.3,3.5.4 and 3.5.5
Anyone else noticed this?
Click to expand...
Click to collapse
yes. there is a solution. just disable tap to edit option in shell dttings.actualy i donot remeber the exact name.
xmaxin said:
yes. there is a solution. just disable tap to edit option in shell dttings.actualy i donot remeber the exact name.
Click to expand...
Click to collapse
I have the same issue
WISEGUY_KEV said:
I have the same issue
Click to expand...
Click to collapse
As the former poster tried to explain. There's no solution but to disable "click and hold" in SPB Mobile Shell settings
Settings --> System --> last item "support click and hold" -> off
that way the camera press won't interfere with the click to "edit layout" function. A minor hassle indeed but a hassle nonetheless.
Oh well, for the price. The S200 ain;t that bad. It's weird that the next model in Acer's WM-line, the P300, is LESS capable (and much slower) than our beloved Neotouch? But it does get a newer WM6.5?!?!?! What's with these morons? Just keep the S200 in your line-up and goddamn keep selling it. Soon all those Android ppl will return and they need a Windows Mobile phone NOT a Windows Phone phone!
increase camera bitrate/frame rate post 425
http://acer-club.ru/foto-Videokamera-s200-t461-page-420.html

Categories

Resources