Upgrading o2 1.66 to 1.72 brings xda II to dead? is this possible? that there is no solution to fix it?
Can i upgrade using win98?
Hi you didn't metion what exactly happend to your pda ??
although you can restore the old rom or re program the new one again
you have to get the boot loader screen by pressing the power button and the reset and the round button in the middle to down in the same time
you will get "Serial " or if on the cradle "USB"
Try this
Hi you didn't metion what exactly happend to your pda ??
although you can restore the old rom or re program the new one again
you have to get the boot loader screen by pressing the power button and the reset and the round button in the middle to down in the same time
you will get "Serial " or if on the cradle "USB"
mine was 1.66, upgraded to O2 UK official 1.72 rom. did not see any problem.
Related
Help!!!
I have been using a WWE WM6 ROM for a few weeks now, after having got out of trouble using the German O2 Orbit ROM. Since then been running WWE WM6 ROM and loaded a few extra HTC Apps - all fine!
Yesterday, tried installing a different ROM, now the device will not power on. USB or mains - nothing. No lights, no life :-(
Have I "bricked" the device, or does someone know how to resolve this?
Help!!!
It may still OK. It just cannot wake the OS up. Try to enter bootloader by pressing power + voice recorder + soft reset simultaneously, then flash with original ROM
Tried this - used this before...
The device just seems like it has no power...
No power, no way to reset - I have tried the "Voice" + "Power" + "Reset" combinations. I am familiar with getting into the Bootloader screen...
Unless anyone has a better idea, I'll have to go to the manufacturer and get it repaired I guess...
original ROM
Hi, where can I find the original ROM image of Dopod P800W?
I tried to sign up their web site but not worked.
Thank you very much for your help!
hi all ..
I did flash my HTC wizard with new rom after finishing the install the device reboot and stacked on the boot screen then I tried to go to the boot screen but I couldn't , I tried to make hard rest but also I coudn't nothing is working even charing the device cant be made .
bye bye
Are you able to get to a multi-colored screen with numbers?
In case you don't know, to get to the bootloader screen hold down the camera button and press the power button.
now i got the same problem.
I updated the rom & now i have the multi-colored (red/green/blue/white) screen
with RUU - IPL 2.18 - SPL 2.18 - USB on it (Qtek 9100)
I downloaded the tools from Vippie in the thread "How to flash a new ROM to your Wizard... a little tutorial!" but those won't help...
anybody got any advice? I would like to install WM6...
thanks in advance!
My Artemis is coming only to the splash screen (orange) and than is stooping. Is it bricked, since I tried to upgrade the new software??
Thanks
unfortunatly yes... may be...
Hi,
I had the same Problem wirth MDA C3 and this one was bricked... But i don´t tried to start the bootloader mode (on/off + speech-dial hardware button together and than the softreset button, hold the other two buttons and press only short the softreset button)
May be than you should be able to flash it once more... However, i read this tip to late, i changed my divece before so i can´t garantee that it works....
But give him a try, it´s worth the time !!
regadrs,
andi
u'll find it in the forums somewhere, u just need to flash it with a new ROM (and USPL if it isn't the original ROM) This can be done from Bootloader as suggested by Mr.Trader.
rilazi said:
My Artemis is coming only to the splash screen (orange) and than is stooping. Is it bricked, since I tried to upgrade the new software??
Thanks
Click to expand...
Click to collapse
obtain the original rom for your device and flash it. it should be all fine.
after, install uspl, and then you flash with any rom again.
regards,
hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks
ps:sorry for the double posting(wizard+wm6) but now i figured out that since my phone doesnt start and hasnt a wm6 rom on it , the place for this thread is here
fulgerul said:
hello everyone. i just bought a g3 wich remains stuck in the ipl/spl screen. i tried VIPPIE 's tutorial (many thanks man for ur work) and flash button rom 1.05 to revive the phone. it flashed without any error , but same result. phone doesnt pass the ipl/spl screen. next i tried to flash Xda_MiniS_LaunchROM_v154102, flashed ok but nothing happend. i m just stuck on the ipl/spl screen. the phone isnt bricked but i can not start it to do a soft spl and flash it. any ideas ?
because it s an o2 xda mini s , i thought an original o2 rom would do the trick (start the phone) but i couldnt find an original rom (tried the xda dev ftp page and the o2 one).
many thanks
ps:sorry for the double posting(wizard+wm6) but now i figured out that since my phone doesnt start and hasnt a wm6 rom on it , the place for this thread is here
Click to expand...
Click to collapse
Is it the Bootloaders screen(Tricolor) with IPL/SPL or initial loading screen with ipl/spl ?
What ipl/spl...? it displays at the moment ?
You can try to get into Bootloaders mode (tricolor screen) by pressing and holding down the camera button and press the Soft Reset button at the same time with the stylus or turn off the phone and while pressing and keeping holding down the camera button,Power On the phone,it'll wake up and go into Bootloaders (tricolor screen).if it goes into bootloaders,connect your phone to the pc via usb and check if small usb appears at the bottom of the bootloaders screen,if its there run the Ruu to flash,But first post your present ipl/spl..? here.
Cheers
hmm , this is from XDADeveloperWiki
Once the flash is done and your Wizard is rebooted, it will display an IPL of 1.xx and an SPL of 2.xx.
Click to expand...
Click to collapse
well, in my case , after button rom flashes wizard displays IPL 1.01 SPL 1.03 and after i flash the xda_mini_launch_rom it displays IPL 1.03 SPL 1.05 . NOT SPL 2.xx as mentioned in the tutorial . why ?
zabardast_1 - many thanks for the quick reply mate. it starts with the ipl spl screen. i wrote the values above.
i get it into bootloader with the camera + on button , bot the active sync on the systray , doesnt activate, it remains grey (like no device is connected). weird stuff.
yesterday i just upgraded a g4 wizard to wm6 and everything went smooth , an now
fulgerul said:
hmm , this is from XDADeveloperWiki
well, in my case , after button rom flashes wizard displays IPL 1.01 SPL 1.03 and after i flash the xda_mini_launch_rom it displays IPL 1.03 SPL 1.05 . NOT SPL 2.xx as mentioned in the tutorial . why ?
Click to expand...
Click to collapse
ok,after flashing button's rom or xda_mini you'll certainly have an ipl/spl 1.xx,cuz these roms have actually ipl/spl 1.xx,they are aku 1.xx roms,it's required to have ipl/spl 1.xx to use lokiwiz02b tool to SIM/CID unlock the phone,only then it can be upgraded to any wm6 roms.But to upgrade to wm6 its essential to have ipl/spl 2.xx,so to get to ipl/spl 2.xx,you have to flash your phone with T-mobile 2.26,then it'll show an ipl/spl 2.xx as required,ok
Cheers
thanks mate , but in order to do the lokiwiz soft spl i need to have a working phone (i need to write the cab into my phone and execute). by doing so , my phone needs to work after flashing the button rom or the xda mini launch rom (right?). but mine , after flashing, remains in the ipl/spl screen (not the bootloader).
if i flash an o2 xda mini original rom , do i have a chance to revive the phone and to start it in order to apply the lokiwiz soft spl ?
Activesync will not work in bootloaders mode,bootloaders cut off the activesync,you can only verify the connectivity between your phone and pc,if in bootloaders,connect the phone to the pc via usb cable and check if small usb appears at the bottom of the bootloaders,if its there then just flash the rom,there's no need to establish connection through activesync,ok
fulgerul said:
thanks mate , but in order to do the lokiwiz soft spl i need to have a working phone (i need to write the cab into my phone and execute). by doing so , my phone needs to work after flashing the button rom or the xda mini launch rom (right?). but mine , after flashing, remains in the ipl/spl screen (not the bootloader).
if i flash an o2 xda mini original rom , do i have a chance to revive the phone and to start it in order to apply the lokiwiz soft spl ?
Click to expand...
Click to collapse
YES ! first of all you got to have a working OS on the phone to activesync,only the you can perform with lokiwiz02b,ok
ok , so what should i do in order to start it succesfully and use lokiwiz. i cant find an original o2 rom and button rom or launch rom doesnt start my phone. what can i do ?
the o2 roms were deleted from xda dev ftp
ps : mate , if u r kind , log in to yahoo or msn , i m trying to contact u . ty
after a lot of searching and digging, i found the missing xda dev ftp O2 original roms . i flashed Xda_MiniS_LaunchROM_v154102 , everything went ok , same result. doesnt pass the ipl spl screen. tried RUU_Wizard_1050402_101_11210_O2_ENG and same thing. im getting really confused. my pc responses when i connect the wizard, it flashes with no errors , but it wont start. what can i try more ?
ohh, i have made a new nasty descovery: when i keep pressed down the comm button and the voice button and press the reset with stylus, the phone turns off and restarts in spl/ipl screen instead of hard resseting. is it really messed up ?
I'm afraid m8,it has most probably some hardware issues,better get it checked by some techy or mobile repair shop.
Cheers !
thanks mate. you are most probably right. do you have any idea what should be checked and how ? i ask this because the software part is clearly damaged.
can i revive it using mtty program ? as a last resort. some mtty commands ? ty
Help, help!!!!
Certainly when upgrade from WM03 to WM06, we all must go to the boot loader option to clean registry, disable KITL, clean storage...etc . However,poor me, I have an XDAII with broken record and camera button, so that I can not get in Boot Loader ( Press ResetButton and hold down CameraButton + RecordButton )
So could any one solve this problem?
many thank!!!!
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Arimbi said:
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Click to expand...
Click to collapse
yes, its because you'r flashing Radio only, if you are flashing WM5/WM6/WM6.1/WM6.5 you need to enter bootloader mode!
Me to have only record button not working
But i made it,open your phone open whole parts,now attach your battery with a rubber ring so phone can start,notice that white part which is situated near the camera which has four pines fix it with screw or until your phone boots, you need four hands either to enter in boot loader mode or hard reset.you should connect the circuit button with a metal/wire,first try that button you will see camera or record working apply same for your needs. out of that four points of button adjust three to connect toughether to activate.