Have been to the kitchen and done some cooking the last night.
Facts:Using SD card for all upgrades
Never cook anything but the Base ROM itself (e.g. no extras)
The upgrade works perfect every time, meaning it ends successfully so that I can do a cold boot to start the "new" ROM image.
ROM version org: 3.16
Current ROM: 3.20.06 ENG
Radio version: 3.19.01
Protocol version: 32S54
Model No: PW10A1
RAM: 32MB
Flash size: 32MB
SD Card size: 64MB
I have been able to switch back and forth between different 2002 ROM's
but every time I upgrade to 2003 ROM the unit hangs on the introductions screen. I see the splash for instans 4.01.19: s "Welcome to T-Mobile"
In the bottom right corner I can see the Protocol version, ROM version and Radio version numbers. BUT there it is and it does not respond to any buttons or even magic words like pretty please with suger on top.
I have tried the following versions:
4.00.33 GER, 4.01.00 ENG, 4.01.16 ENG and A.30.09 ENG
I have no problem getting back to a working unit with almost any 2002 ROM but hey I wanna try it out with a 2003 ROM.
Any ideas anyone? I have been looking around quit a bit but cant see that anyone posted something that helps me out here.
Thanks to everyone who contributes to this great forum!
Jonas
###
not sure but maybe the 32MB ram is too little for 2003
these devices are pretty rare i think
maybe you should try doing a search for people with 32MB devices
and their exp with 2003 ?
Rudegar said:
not sure but maybe the 32MB ram is too little for 2003
these devices are pretty rare i think
maybe you should try doing a search for people with 32MB devices
and their exp with 2003 ?
Click to expand...
Click to collapse
The 32 MB shouldn't be the problem. Using myself a device with only 32 MB without any problems with WM2003 .....
Maybe it's a problem with the Radio Stack...
Nearly all the providers of a WM2003 Release included a Radio Stack Update. Myself i've tested it with the 4.21 and the 3.23. Maybe yours 3.19. is just too old.....
Stefan
Ok, here we go again,
found the Radio Stack Upgrade from O2 uk (V421)
and upgraded witout problem to this one.
No I tried to upgrade with 2003 ROM 4.01.16 ENG but still same thing.
It hangs on boot screen even though it now in the lower right corner says:
G32S54
R4.21.00
4.01.16
I will try to load ROM A.30.09 ENG now.
I let you know how it goes.
/Jonas
Still no luck
Ok I have now tried will all known 2003 ROMs from the kitchen with the same sad result. (hang on boot screen as before)
I now downloaded the official O2 uk release of upgrade for XDAII (Xda_II_Upgrade_v16050.exe) when I unpack this one I find the following files that might be useful ms_.nbf, NK.nbf, Radio_.nbf.
When I try to write the NK.nbf to my SD card XDATools tells me that it does not recognize the file format.
I think I have seen something about this error but I cant find it now.
Im not even sure if this ROM will work. I can not see that this ROM is uploaded in the kitchen either but perhaps it will be?
So Im still stuck so any tips would be great and I keep testing new ways ahead.
/Jonas
hi. as LumpiStefan commended, you need to upgrade the latest radio stack. I think the radio stack 6.24 will work for you. check my posted for the radio stack.
Secondly, the radio stack will work it its specific OS rom image. for example, the radio stack for Tmoble , must match the Tmobile OS. you can not use radio stack built for O2 for Tmobile OS.
Therefore, try to upgrade with matching OS and its Radio Stack. I tried one night with all OS from Tmobile, ATT and OS to come with these solutions.
hoanghon said:
you need to upgrade the latest radio stack. I think the radio stack 6.24 will work for you. check my posted for the radio stack.
Click to expand...
Click to collapse
That´s wrong. 6.24 is for PW10B Models with 900/1900 MHz GSM. Do not use it on your device
hoanghon said:
Secondly, the radio stack will work it its specific OS rom image. for example, the radio stack for Tmoble , must match the Tmobile OS. you can not use radio stack built for O2 for Tmobile OS.
Click to expand...
Click to collapse
That´s wrong too. Already used some T-Mobile ROMS with O2 Radiostack....
Stefan
hi LumpiStefan,
Okay. I am wrong. this radio stack use in USA.
Also, I don't know but I had tried to swap the radio stack O2 to run on Tmobile or ATT, the radio stack never turn On.
Also can you help me to have a radio stack version 4.20 or lower. ther repair.zip contain version 4.21. Thanks for correcting me.
Related
hi all!
i just upgraded to ppc2000 /version 4.00.01 eng on my austrian t-mobile mda.
that does work. but as i tried the earlier version of it (imho 3.xx) before i think that connecting to gprs was WAYS faster. so i thought of up/downgrading my radio stack which is 3.16 at the moment.
some ppl are saying they use version 4 or even 6... BUT: can i use them as well? what are the limitations ???
here we use gsm 900/1800 so i guess any us-att stack that is meant for 1900 won't work, right?
so: what version to use, and what do you suggest?
and one more Q: upgrading OS does NOT upgrade the radio stack, right?
pls anybody confirm.
thanx!
regards ize|man
and one more Q: upgrading OS does NOT upgrade the radio stack, right?
Yes, that is right!
nq said:
and one more Q: upgrading OS does NOT upgrade the radio stack, right?
Yes, that is right!
Click to expand...
Click to collapse
As long as you are using a cooked ROM, or .nbf file on SD card ... be careful as some opertors' upgrade contains both RSU and ROM update in one exe file!
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Re: Which is a recent / suitable ROM and Radio upgrade for Q
faisal said:
Hello folks,
QTEK 1010 bought from Dubai
Model PW10A1
ROM version 3.16.52 ENG
ROM Date 03/10/03
Radio version 3.19.01
Protocol version 32S54
My questions: -
For me, which is a suitable upgrade...
From www.myxda.com:-
ROM version 3.20.06
Radio version 4.21
OR
From www.carrierdevices.com.au:-
CE Upgrade File : RUU_CEv3.18.04wwe_Qtek_SHIP.exe
Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe]
Thanks
Faisal
Click to expand...
Click to collapse
You may use any ROM Updgrade, you may even want to cook your own ROM, but please do not think of performing a radio stack upgrade if your present radio is working well and giving you a trouble free service.
Hi guys,
I 'm in same situation but with higher versions, and can hardly wait to get a new 2003 ROM.
I can't just play with my XDA as I use it all the time for work and it's pretty stable so far. I just also can't tell that the ROM is 'totally' separate from the RUU in WM2003.
So the question is: is there any one here who has gone through a 2003 upgrade for Qtek 1010 to tell us his thoughts after the upgrade ?
I read a lot about the stability of 4.00.16 ENG, but all been written was for O2 R4.21 or T-Mobile R6.xx. Did any one in this region (Mid East) with R 3.2x went into this upgrade ? and what is the current status ?
Thanx all ....
Latest ...
I tried upgrading to 4.00.11 ENG from the kitchen ... no matter how many trys it just restarts and gives the same error message "Can't open USB/com port ..." ...
Do I miss anything ??
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Biso007 said:
more update ...
Tried to cook the new ROM as .nb1 file and used Xdatools from the kitchen to flash my device .... same result :? :evil:
Is it possible that there is a ROM protection on my XDA ??? :shock:
Click to expand...
Click to collapse
Hi Biso007,
Look at the IDIOTS GUIDE at:
http://www.xda-developers.com/forum/viewtopic.php?t=3171
and follow the instructions thoroughly one by one and you can't go wrong, it did work for me, I was in the same situation.
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Well i am using WM2003 4.00.11 and its working fine for me no problem i cooked in the kitchen you just need to read arround this great forum for a whgile on topics such as upgrades and ROM to know exactly what you are dealing with and then you will able to upgrade smoothly.
:wink:
Hi ARZLEB
I read lots and lots about upgrade lessons but none of them worked for me .... I got an advice to use SD card with bootloader as it's the only working way. Now I wonder why the EXE method was created!!
I see that u got the 4.00.11 working. Did u upgrade it using EXE or SD card. Any help would be so appreciated ... thnx
Well i used the EXE methode the file i cooked in the Kitchen but i didnt change the version i left as 3 at the bottom of the page it works fine i upgraded from 3.XX to 4.XX then i downgraded from 4.00.11 to 4.00.05 then upgraded again all using EXE format so far working great.
i will be honest with you i know about the SD methode very well but never tried it so u have to make more search on this issue.
If you need anything more plz message me anytime and i will be more then whilling to help you step by step...
faisal said:
Samohile - Thanks. It is good advice to not mess with the radio if you can help it.
My only problem is that my device periodically shuts off. Then pressing the power button soft boots it. I cant tell for sure but it seems that this happens after an incoming or missed call. It seems that other friends using ROM 3.18.04 and Radio 3.25.01 (like our friend biso007 here) seem to have very stable systems.
I can try upgrading the ROM only and see what happens but the information at www.carrierdevices.com seems to imply that both ought to be upgraded at the same time. I notice it is an Australian site. Does that matter? Also, the version of the radio upgrade is a bit confusing, at least from its name. (Radio Upgrade File : RSUv1.15_(GPRS_T32500_ENG).exe] ). I wonder what this RSUv1.15 translates into since the name of the exe file for the ROM is nicely descriptive of the version (3.18.04).
Any advice in this would be very welcome..
Click to expand...
Click to collapse
Faisal sorry for very late reply.
I have flashed my Qtek (bought in Abu Dhabi) with several versions of roms cooked in kitchens (Jeff's and Stefans's), but I have finally settled with ATT release wm2003 Siemens SX56 upgrade. It comes with most of the bugs fixed (except multiple reset bug) and is quite stable. I almost never have to reset it. You can flash the ROM only by SD card method though. You can try it. It's always a good idea to flash using SD card method. USB method using ProgramA is not very safe. I guess the network in Pakistan is compatible with the one in the UAE, so you can safely use it, if you don't mess up with the Radio Stack. My Radio is 3.23.01 and I have no problems with that.
I just want WM2003 on my XDA. I tried installing 4.00.05 but got the white screen of death. Does anyone know if the Seimens SX56 ROM will work on my phone? I plan not to **** with the radio stack.
Just want a O/S that's newer and not as buggy as the original 3.21 that I had.
I miss my working XDA, it's been 2 long weeks and I finally get my MMC card back so I can flash.
Anyone in Australia got 4.00.05 working or WM2003? Which version you running if so?
Any info would be greatly appreciated.
you didn't tell what's your device type and how the 4.00.05 failed.
I'm not sure the MMC can be used instead of SD card, but if yes, then i may advice you to cook a new 4.00.05 ROM at yorch.net and select the .nbf file method. move the file to your MMC card using the XDAtools and flash your xda through the boot loader.
good luck.
My device type was a:
PW10A
3.20.06 ENG (ROM)
3.21 (Radio)
But after trying to install with an EXE self installer became:
G32S54
4.00.05 (ROM)
R4.21.00 (Radio)
One thing I have worked out about the EXE self installers is that they will extract a NBF file to a directory, in C:\Program Files\Programme A\English
so therefore, whichever version you download in a self extracting file contains the NBF file that's required.
goatieman said:
My device type was a:
PW10A
3.20.06 ENG (ROM)
3.21 (Radio)
But after trying to install with an EXE self installer became:
G32S54
4.00.05 (ROM)
R4.21.00 (Radio)
Click to expand...
Click to collapse
The Radio part shouldn't be affected by this upgrade!.
4.00.05 works just fine. The 4.01.00 and AT&T release ROM are even better (except for the stupid noise attenuation everyone's working to try and defeat).
Never(!) use the .exe method for upgrade, you have a much greater chance of it screwing your XDA. Also, according to your post you weren't messing with the radio, but by using the .exe upgrade you have inadvertantly upgraded the radio. 4.21 is the same version as O2 released for Australia, but I'm not quite sure if you're running the T-Mobile version now? As far as I know you can screw up upgrading your ROM as much as you like using the SD method because you can always whack the SD back in and start again, the bootloader is intact and the radio is intact.
I guess if you use the .exe update method from your manufacturer's release, at least you'll have some recourse in that you were only following what they said to do for the upgrade and they will probably fix it.
Use the SD upgrade method to fix your current problem, and you may need to use the Wallaby patch to do that. Good luck.
Best ROM for a QTek 1010 connected to Vodafone Australia
Howdy,
I have a QTek 1010 which I'm using in Australia on the Vodafone network. Which is the best ROM to upgrade my device to Pocket PC 2003?
Device: PW10A1
ROM version: 3.18.04 ENG
ROM date: 05/22/03
Radio version: 3.25.01
Protocl version: 32S54
Cheers,
CK
Which is the best ROM to upgrade my device to Pocket PC 2003?
Click to expand...
Click to collapse
Use A.30.09, it's the only release version out there. All other versions are beta and have their problems. The only headache with A.30.09 is volume attenuation, but either soon we'll have a fix, or soon another manfucturer will make a release public so we can switch over (hopefully) without that annoyance.
Howdy,
Where can I get ROM A.30.09 from?
Where can I get ROM A.30.09 from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=5623
Thanks heaps for that! The upgrade worked perfect.
You were right about the volume issue becoming annoying! :twisted:
Which Radio Stack is the best to use in Australia?
Howdy,
Another quick question. Which Radio Stack is the better one to use? The QTek 1010 Radio Stack v3.25.01 (32S54) or the O2 XDA Radio Stack v4.21 (32S54)?
I hope this is the correct forum.
I have access forthcoming 8125 and was wondering if a rom dump was needed and what tool I should use to do it. I have one that I used for the Apache but I wasn't sure if there was a better tool to copy the everything and if it was needed.
does anyone know a release date for the 8125? I read on some other forum that its delayed till feb 1st. Also is it really 802.11b? the k-jam is 802.11g/b why would they downgrad it?
And yes i would be interested in the rom because i'm gonna get the k-jam till the 8125 is released so i'd like to have the cingular provided rom.
I think it's worth trying. I did it and I have no experience at all .
Grab the aWizard tools in the forum and try dumping it and the extended ROM. http://forum.xda-developers.com/viewtopic.php?t=37386
I'm curious the final specs on it, because I heard it was going to be improved over the Qtek 9100/K-Jam (better CPU, camera...?) Any chance to post those as well?
Also, can you post the current ROM informatoin from Settings...System...Device Information?
(BTW aWizard only dumps the OS ROM and Extended ROM, so if you have a custom tool that pulls also Radio firmware, etc., it might be better)
if you do end up dumping the rom, do you think it will work well with the k-jam?
I have no idea if it will work on other phones. I am not an expert on what to do with the ROM. I was just wondering if someone would be interested and hoping for links to the tools. I will pull the rom tonight when I get home.
once again i'm interested, because i'm getting the k-jam in a couple of days and then i'm going back to texas and would like the cingular rom for compatibility issues.
also i read somewhere that there are some hardware differences between the k-jam and the cingular 8125 so i dont know if it will work. but i'll give it a try.
did you ever end up dumping the rom? I got my kjam yesterday and going back to texas in 2 days and i'd like to have that rom on my device.
Have to ROM. Who can I send it to?
Here is the information from the Settings->Verison
ROM Verision 1.6.11.1 WWE
ROM date 11/1/05
Radio Version 01.09.11
Protocol Verzion 4.0.13.20
ExtROM Verison 1.6.11.102
Hardware
CPU OMAP850
Speed 195 MHz
RAM 64MB
FLash size 128 MB
Flash chip type M-Systems G3
Data bus 16 bits
Storage size 47.46 MB
LCD 240x320
Colors 65536
I am unable to post the ROM from work. I should have some time tonight to get it uploaded. Sorry for the delay folks.
I just posted it on the yousendit. com site. Maybe someone can pull it down and move it to the FTP site for me?
http://s38.yousendit.com/d.aspx?id=0P5TFC98V3IH52A0LDUYXGIW1W
thank you SOOO MUCH. i'm downloading it now, all the hardware specs look the same but what are the dangers if i put this on my device?
Anyone out there that knows about this, can you please tell me.
lunchboxfett said:
I just posted it on the yousendit. com site. Maybe someone can pull it down and move it to the FTP site for me?
http://s38.yousendit.com/d.aspx?id=0P5TFC98V3IH52A0LDUYXGIW1W
Click to expand...
Click to collapse
Uploaded it to the FTP
ftp://xda:[email protected]/Uploads/HTC_Wizard/Roms/Cingular/cing-8125.zip
I just installed the Cingular 8125 Rom on my Qtek 9100. So far I don't see any differences from the 1.6.7.1 ROM
Old Rom
ROM Verision 1.6.7.1 WWE
ROM date 11/28/05
Radio Version 01.13.10
Protocol Verzion 4.0.13.24
ExtROM Verison 1.6.7.101
New Rom
ROM Verision 1.6.11.1 WWE
ROM date 11/1/05
Radio Version 01.13.10
Protocol Verzion 4.0.13.24
ExtROM Verison 1.6.7.101
All the Cingular customizations must be in the Extended Rom. Could someone please upload the Cingular Extended Rom to the FTP site?
so the Cingular ROM is 1.6.11.1 with a 11/1/05 date and the QTEK ROM 1.6.7.1 has a 11/28/05 date...seems strange that a higher ROM would have an older date. oh well...time to flash AGAIN! :lol:
Installing .nba File?
rkorzuch said:
I just installed the Cingular 8125 Rom on my Qtek 9100. So far I don't see any differences from the 1.6.7.1 ROM
Old Rom
ROM Verision 1.6.7.1 WWE
ROM date 11/28/05
Radio Version 01.13.10
Protocol Verzion 4.0.13.24
ExtROM Verison 1.6.7.101
New Rom
ROM Verision 1.6.11.1 WWE
ROM date 11/1/05
Radio Version 01.13.10
Protocol Verzion 4.0.13.24
ExtROM Verison 1.6.7.101
All the Cingular customizations must be in the Extended Rom. Could someone please upload the Cingular Extended Rom to the FTP site?
Click to expand...
Click to collapse
I have a MDA Vario that I flashed iMate ROM onto while I've been waiting for Cingular's 8125. I joined Cingular last week and would like to flash over to their 8125 ROM. How did you install the .nba file to your unit?
Thanks, Craig
Sorry to high-jack your thread...
So I have the SX-66 from Cingluar, is it worth to upgrade [buy this new phone]?
Have you tried the bluetooth yet?
odie3 said:
Sorry to high-jack your thread...
So I have the SX-66 from Cingluar, is it worth to upgrade [buy this new phone]?
Have you tried the bluetooth yet?
Click to expand...
Click to collapse
I have used both a Motorola HS820 BT headset and GlobalSat BT-338 GPS receiver with my HTC Wizard (MDA Vario) without problems. I have flashed the iMate ROM/Radio combo onto my unit though replacing the Qtek ROM/Radio. I also paired a friends Jabra BT250 without a problem and answered/called to confirm.
supposedly the 8125 is... if nooneelse does first, i'll dump mine when it gets here in 2 days, so i can flash my kjam up to speed and then post it...
rom: 1.8.11.1
DATE: 11/24
had a guy look but he has no clue how to dump it...
@brunoflipper: you can dump your ROM [OS only] and Extended ROM [cab files] using aWizard here is the link to the thread for instructions and downloads. http://forum.xda-developers.com/viewtopic.php?t=37386
By virtue of my 2 x XDAII's failing for whatever reasons (abuse, long-life, etc.), I had to shift to one of my XDAII's (BA) with base OS:
=======================================
WM2003 SE
Version 4.21.1088 (Build 15045.2.6.0)
Processor: Intel(R) PXA263
Memory: 125.77 MB
ROM v.: 1.40.00 WWE
ROM date: 03/10/05
Radio: 1.12.00
Protocol: 1337.42
ExtROM v: 1.40.923 WWE
Model No.: PH20B
=================================
I have found that this phone is WAY SLOWER than the XDAII - it's really incredibly slow! (And I had my XDAII with less RAM available!)
I have had problems connecting in Mumbai (India) with Vodafone (this happens with other units (EDGE modem/XDAII) too, but this is *extreme*!
I have to shut off the radio (put into flight mode) then back on, in order to connect to GPRS, or it simply will not connect!
I have tried flashing the ROM for the radio to 1.15, but I have to edit the file on the unit, else I get the error - it's really very time-consuming!
I'm afraid that all my time that I put into this unit will go to waste if I do not have a stable unit that I can rely on....
Any feedback on this?
Thanks!
Try the T-Mobile's rom or PDA2K's rom in Blue Angel Upgrading section.
The O2 rom bugs me too much.
Also install O2 Asia upgrade (I guess u r running a non asian one thats why BA isnt showing compatibility with ur network. Try upgrading to WM5/6 and see if u have luck on GSM/GPRS since majority of asian networks phail with BA WM5/6/6.1/6.5
dark_prince said:
Try the T-Mobile's rom or PDA2K's rom in Blue Angel Upgrading section.
The O2 rom bugs me too much.
Click to expand...
Click to collapse
Yes, it's the O2 ROM - not sure if this one was the one I bought in SIN or in the UK...any ideas, or way to tell?
Both were O2 branded....
dark_prince said:
Also install O2 Asia upgrade (I guess u r running a non asian one thats why BA isnt showing compatibility with ur network. Try upgrading to WM5/6 and see if u have luck on GSM/GPRS since majority of asian networks phail with BA WM5/6/6.1/6.5
Click to expand...
Click to collapse
Which is the best upgrade (simplest) to do, stable, with almost no bugs, with a similar to original config/options?
TIA!
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
xplode said:
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
Click to expand...
Click to collapse
Wow - thanks for the tips - wonderful to have the gurus of the BA helping us!
So, how does one delete the radio files?
I unzipped and extracted, then ran the .exe file, which started the RUU update.
xplode said:
well first of all if you want less bugs do not install the OEM crapware (the extrom software) you may even resize the extrom partition to 128 k to use the space as storage
http://alevri.atspace.com/ - updated Shipped roms list and mirrors which i will keep online
My advice is to flash the latest t-mobile 1.42 rom delete radio and extrom update files and flash rom only
Click to expand...
Click to collapse
explode... i have 02 XDAIIs, what your advice for ROM on my IIs? and btw i cant expand my extrom to 128K using tools on XDA-DEV (extrom_unlocker.cab and Repart_doc.exe) had any idea?
Stevo.Mksr said:
explode... i have 02 XDAIIs, what your advice for ROM on my IIs? and btw i cant expand my extrom to 128K using tools on XDA-DEV (extrom_unlocker.cab and Repart_doc.exe) had any idea?
Click to expand...
Click to collapse
Why can't you? Keep in mind that you can only do this only in 2003. So, from what I have read in your other posts you are either in 6.1 or in 6.5 (going back to 6.1). You have to use the Repart_doc and the ExtRom Unlocker tools in order to do so.
Aside from everything, I have been using xplode's version of 6.5 and I am pretty happy with it (both stability and usability)-wise.
If you are absolutely disgusted by it, you should try sun_dream's 20578. Best 6.1 that I have had...
Hope this helps.
@egzthunder1: did back to original rom wm2003 02XDAIIs and other cooked rom in wm2003, but it failed due to physical logic reason when im runnig repart_doc.exe. but when im expand my SX66 its work!! weird thing.
Stevo.Mksr said:
@egzthunder1: did back to original rom wm2003 02XDAIIs and other cooked rom in wm2003, but it failed due to physical logic reason when im runnig repart_doc.exe. but when im expand my SX66 its work!! weird thing.
Click to expand...
Click to collapse
That is the weirdest thing... it should work fine since it is the same phone...