Related
WiFi card in xdaII......
I have installed a sandisk wifi card in the xdaii and it detects hot spots ok but when i try to open a page in IE comes up page not found. I have the network card settings to "this card connects to the internet etc" and i think i'm doing everything ok. surely not all the hotspots in manchester uk can be locked can they?? are we really a nation of paranoid people?? I don't want to crash networks just get me a free fast connection in St Ann's Square whilst I'm having lunch!!
any ideas.
well if i had a wireless lan and a connection to the internet i surely would have a firewall aswell
suppose the easiest way to find out where your issue is, is if you have a wireless lan at home which you can test the connection with
read a review which say that the sandisk card works ok with the xda2
The SanDisk WiFi card works for sure. I'm writing this with it.
Check the network settings under Settings->Connections->Network->Extended->Networkcard->Wireless. You may have to manually select and enable the network.
XDA II + WiFi
[email protected] said:
The SanDisk WiFi card works for sure. I'm writing this with it.
Check the network settings under Settings->Connections->Network->Extended->Networkcard->Wireless. You may have to manually select and enable the network.
Click to expand...
Click to collapse
I have just enquired of Expansys UK if the Sandisk WiFi SD Card will work with the XDA II and they said NO, it has problems???? As I can't find another WiFi D card anywhere, it leaves me a little frustrated. Particularly as it seems it (XDA II) doesn't work with Tom Tom Navigator 11 Bluetooth either, which was my next purchase! If a few people can CONFIRM that the XDA 11 does actually work with the Sandisk WiFi Card, I'll risk buying one, as I need WiFi. Many thanks Steve
Not being to rude here, however Expansys told you crap.. I'm using one here which was purchased from Expansys. Albeit a little difficult to set up I'm online with my own home wireless Network.
There is another WiFi card available in the market, saw it in an interview with XDA sales people, it's from Socket. Got a review here.
http://www.pdabuyersguide.com/tips/socket_SD_wifi.htm
work for me
sundisk worked for me right from the box. no driver to install.
just entered my home wlan wep password and got connected.
The original person asking about it: if a network need a key,
it can often show up as "active" but in IE will simply won't load anything...
ßeta said:
Not being to rude here, however Expansys told you crap.. I'm using one here which was purchased from Expansys. Albeit a little difficult to set up I'm online with my own home wireless Network.
Click to expand...
Click to collapse
Hi there, thanks for your response. I access the Internet via a Broadband connection through a Wireless Router in my Office and wish to use the XDA II around the office on occasion (with a working WiFi SD Card installed). Have you used your WiFi card in similar circumstances? I am cautious because Bluetooth Car Kit doesn't work, Bluetooth GPS doesn't work at the moment (appreciate this is not WiFi) but trying to buy something this time around THAT DOES WORK with the XDA II. many thanks Steve
Your impression regarding the XDA II is wrong.
Thanks to TOWA Bluetooth GPS does work. Its just that Microsoft is trying to impose a different Bluetooth architecture than that HP has been using with the IPAQ (they've done it before and they'll do it again). :wink:
As I said above, I've been using the SanDisk WiFi-card on my XDA II since day 1 when I got the device. I've used in at home with my wireless router, in the office through an access point and in the hotspot at Starbucks.
Only problems I've had sofar were in one network that was using a D-Link access point, where I couldn't get in - on the other hand also my PC had problems with this network).
When you insert the card that LED on it should start flashing. If it doesn't turn solid green(yellow) after a few minutes, the network is not connecting. You can check this through the applet on the task bar (Wireless network status). If it says searching it hasn't found or connected to your network. In this case go to Settings->Connections-->Connections->Extended->Networkcard. Ith should list the available networks. Select your network and select Connect on the options popup-menu. If you have encryption enabled it will ask you for the paramters (I've had to got through this procedure a couple of times when I put in a wrong code on the initial setup).
If the LED is solid green then you have connected to the network. If PIE doesn't work check the IP-settings again using that applet on the task bar (Wireless Network Status).
ANd I'm sure that Bluetooth Car Kit will be working soon also. But then again, the XDA doesn't have (andd never promised) Voice Dialing anyway. :?
Quote ex tbd.immigrantsong.de "Your impression regarding the XDA II is wrong."
Thanks for this. I am really pleased with my XDA II. I guess I wanted to install Bluetooth GPS and Handsfree Bluetooth in my car and then found that my chosen purchases the Tom Tom Navigator 2 Bluetooth GPS and the Parrot CK3000 Handsfree Car kit don't currently work with the XDA II Bluetooth. I understand that Tom Tom/O2 etc are working on it.
A colleague has since told me that I wouldn't get BOTH devices working together in my car at the same time anyway. i.e. I could have a Bluetooth Car Kit or a Bluetooth GPS but not have the 2 devices working together? Do you know if this is correct? I appreciate your help on this.
My Wireless Network/Broadband router is the Netgear 824M 802.11B and this is what I wish to use in conjunction with SD WIFI Card in my XDA II.
When I tried to order from Expansys and told them it eas for use with an O2 XDA II they said "It will not work" so you can see my predicament. £100+ purchase then possible not work, and they have pre-warned me, so a refund would be looking iffy?
Best regards Steve Grunnill
@Steve Grunnill
I don´t know what Expansys UK says about the SanDisk WiFI, I have bought one for 3 weeks ago using with the XDA II without any problem , just works.
I´m using too TomTom with a SatNav Bluetooth GPS and a BT headset.
Of couse I use Towas bluetooth patch.
Regards
JoseF
Steve,
If you read this thread, you'll discover that someone called Towa has fixed the Bluetooth problem, so you should be fine once you've applied his patch. Here's a quote from that thread of someone who can answer your question about simultaneous Bluetooth connections:
sword said:
Hi guy's ,
I have make all this connected at the same time!:
1) ActiveSync via Bluetooth running and syncronising,
2) EMTAC bluetooth GPS connected and sending datas
3)HBH20 connected and a phone call established !!!!!!!!!!!!!!
Some one did the same ?
Yes I'm using Towa Bluetooth patch
Click to expand...
Click to collapse
So there you have it!
I have the same problem as Xdaer, I've received advice off-forum from various people (thanks Faisal, tbd and others) but I still can't browse my broadband connection. All I keep getting is that 'this page cannot be found' :evil:
Can anyone who has successfully done this please just post the settings they have at their 'network card' settings?
BTW, I understand that its currently impossible to activesync via wifi, can anyone confirm/deny this?
@andygarside
I use to active sync via wifi.
I´m using a Sandisk SD wifi card. XDA II.
I have at home a D-link 614+ with the firmware upgrade (D-link)
It just works.
When I travell and try to connect to some hot spots that are password protected, then I get the messange can´t load the page.
But will normal unprocteded spots no problems. Okey in same airports you have to pay to access the AP but thats another story.
Regards
JoseF
@andygarside
Under connections->Advanced->Network card-> wireless tab, you should see your signal labeled 'available' or connected.
The networks to access is 'all available'
and check 'automatically connect to non-preferred networks'
in the network adapters tab, you should
my network connects to (work or internet) - works with both for me, but each time it reverts to work, even if i save internet..
see the San DisK Wifi card, clicking on it should give you
the ip address screen on one tab and the name server in another tab. in my case i have to specify the ip, the subnet and the default gateway (rather than server assigned), and the name server
Then under connections->select networks-> 'programs that automatically connect to the internet should connect using: here i have the name of the network which you configured above.
this should be easily visible from the connections->tasks tab and you can now set the proxy from here - usually with port 8080.
I hope this helps - let me know if it works and do ask again if i am missing out something here..
get a connection but no luck surfing!
hi every1,
iv followed d instructions etc but no luck browsing however i get a padlock icon in the corner with a red slash across it - what does that mean?
thanks in advance!
Please don't flame...
But i've just got an xdaII... i've set up wireless all over the house and was told the xda supports wifi... you lot are talking about a wifi attachment... does that mean i can't use the xdaII on my wirless netwrok without the sandisk modem?
Thanks
Fais
Fais said:
Please don't flame...
But i've just got an xdaII... i've set up wireless all over the house and was told the xda supports wifi... you lot are talking about a wifi attachment... does that mean i can't use the xdaII on my wirless netwrok without the sandisk modem?
Click to expand...
Click to collapse
Fais
you're correct. the XDA II doesnt have builtin WiFi, you need
a small attachment "sandisk wifi card". search for it via google.
Faisal, followed your instructions to the letter and....... it works!! Thanks ever so much, I'm really grateful!
Now, last question, can I activesync via WiFi?
Thanks again.....
Andy.
andygarside
Great to hear that it worked and i am delighted to have been of help.
I have not tried synching via Wi-Fi - so i have no idea. Do let me know if you get it to work.
One can obviously access an email account, though i have not been able to access my mail on the exchange server via WiFi for some reason but i suspect it is a configuration issue that i have not sorted so far
Hi all,
Could someone please tell me why I can connet to my wireless network at home, but I can't view any web pages or download any emails on my XDA II!!
Any help would be greatly recieved!!
Cheers Guys
Works fine for me mate..
Things to check.
1) XDAII Has an ip address assigned to it within the correct subnet for your home wifi.
2) XDAII Has the correct default gateway configured which will either be your wireless access router, or another type of router you have that provides internet access.
3) That your XDAII can see the network available to it through the start, setting, connections, connections, advanced, network card bit. Make sure that you actually tell it to connect to your network too. If you can't see it and you are sure the wifi card is installed ok, make sure that you have enabled SSID broadcast on your WAP.
Let us know how you get on.
Rgds,
Rob.
rob,
what do you mean, "make sure you have sidd enabled on you wap" ??
i have beeb trying to get this to work for days..
lmk m8
Zetex
He means..
He means that your Wireless accesspoint should have broadcast SSID enabled. If you have not intentionaly disabled it, it is most likely that it is enabled and thus not the issue. Is your wireless WEP encrypted? If it is, did the Pocketpc ask you specifically for the WEP encryption key when it found your network?
- Johan
Bizmarty said:
Hi all,
Could someone please tell me why I can connet to my wireless network at home, but I can't view any web pages or download any emails on my XDA II!!
Any help would be greatly recieved!!
Cheers Guys
Click to expand...
Click to collapse
----------------------------------
I am using a XDA II. Having received a faulty 'backpack', now replaced, I am still trying to get it to connect through a Sandisk CF Wi-Fi card to a D-Link 900+ AP hanging off an Intel router and my Linux server. In desperation I connected the CF card through a PCMICA adaptor into my notebook. After tweaking the 900+ AP (using v. 2.61 firmware), I found that it liked 64kb WEP, SSID on, Channel 11, Infrastructure (not Ad Hoc), and left on fully automatic so D-Link 650 Wi-Fi card in my notebook runs at 22 Mbps, and the Sandisk card at 11 Mbps.
But does it run in the XDA II you ask? Nope! I think that Sandisk's software leaves a lot to be desired. I am using vxIPConfig and vxUtil tools to see what is what ... but to no effect. I would gladly flick the Sandisk card now I know their software is lacking.
Any clues from other users?
Driving me nuts
Sorry not to actually come up with answers, but I thought you might gather some comfort from the fact that my XDA II/Sandisk combo is driving me nuts too. You are not alone....!
First thing I did was remove the pre-installed Socket wifi s/w and install the Sandisk stuff, but although my XDA can happily see my network, it will not log on no matter what I seem to do.
Am going to review some of the other helpful posts here and try the tips and will report back......!
SMW1
Re: Driving me nuts
SMW1 said:
... but although my XDA can happily see my network, it will not log on no matter what I seem to do.
Click to expand...
Click to collapse
The CD-ROM that came with mine seems to have been designed for WinCE, and not Mobile Windows 2003 for the PPC. As a result I cannot get rid of the Sandisk 128M+WiFi CompactFlash Card settings from the 'Configure Network Adaptors' area. I have to go in via my PC and ActiveSync (3.7) and rename the two offending .dll files before the CD-ROM software removes the drivers. I manually delete the renamed .dll.old files from the XDA II.
Sandisk seem pretty useless. I let them know of these problems and the link they gave me was to the straight wireless LAN card ... That didn't work, so go figure!
I am told the Sockets drivers out of the UK are better (for basically the same card), however, their FTP site does not work .. some say it hasn't worked since April 2004. More useless information, except that their docs. leave Sandisk for dead!
I keep wondering what the so-called 'Zero Configuration' tools that are supposed to be part of Mobile Windows 2003 actually do? I just can't see why the Sandisk card works with my D-Link DWL-900AP+ (802.11b/g) and with my ancient Airport access points on my notebook, but not on the XDA II on the rare occasions that I get the blinking green light (very rare and I don't know why???). <sigh!>
Hi,
I was searching the forum but haven't found any useful info about that.
Do you know any WM5 software which can change TyTN into wireless router ?
Something like WModem, but using 3G and WiFi in the same time.
My idea is to come back home, plug the charger into my phone , run WRouter and have wireless internet connection everywhere in the flat from my mobile connected to 3G web'n'walk T-Mobile network.
What do you think ?
Cheers,
BenOne
IMHO -
no way
no driver support for that
AFAIK no application
why? power consumtion on highest power setting is terrible, and battery is soon completelly depleted, there is also neecesary to left charger in phone...
if you need wifi router (w/ NAT, firewall, VPN...) you can buy inexpensive router for few bucks and it is more compatible, more stable, more usefull, more secure, far better manageable etc...
yeah right, but for what another device if I have one ?
I am charging my tytn everyday, you know how it eats battery...
just wanted to know, it could be quite useful. cheers
U can use bluetooth on the tytn as a router with a reg hack u can connect more then one computer, not the same range and speed but it is possible.
yeah but then everybode have to have bluetooth in their notebooks. we have 3 laptops in the flat and nobody has bluetooth in it. but what then ? everybody are connecting using dial-up, like thorugh normal usb cable, but instead of it, thorugh bluetooth ?
now we have like that - I am commin back home, connect tytn to my laptop, dial-up, and wireless in my laptop is ad-hoc configured, so everybody are connecting to my machine, and modem (tytn) is shared. if tytn has wireless, I thought, that I don't have to leave my laptop all the time turned on. It could be great to leave connected to charger and that's all. All the internet and local home network could be through that. If there was a linux distribution for this phone I am pretty sure this option would be one of main in netwokr configuration...
anyway thx. just wanted to know if there is any piece of soft for that...
benOne
have you seen this official htc link: http://www.europe.htc.com/support/software/htctytn.html?lang=en
it seems it could be possible with vista... but I'm not sure...
EDIT: NO WAY... This is just wireless modem driver for vista... but not for wifi connection! Sorry!
Anyway, I'm very interested in... it could be very interesting for other connections as well... to get online a game consolle...like nintendo wii...
I really hope this dream will come true!
yeah, imagine you play in the bus online. cool!
battery problem. in this configuration I give our tytn 1 hour working on wifi and 3g used together in the same time...
anyway at home you have charger, in a car aswell, you can buy few batteries on ebay and problem resolved heh
sooo, who can start write this application ?
to which company or open source coders team should I send this idea ?
You could tether your Tytn to your laptop using either a usb cable or bluetooth, then setup an adhoc network through your laptops wifi connection. All you need to do then is do internet connection sharing between your bluetooth DUN connection and your wifi card and you should be in business to let your flat mates connect to your adhoc, which essentially turns your laptop into a router. Let me know if that helps or if you have any further questions.
I've done this myself with my mates and it works flawlessly.
Yea, I searched around a while on this way back but there is no solution that I could find.
Your best bet is to either just use PAN bluetooth, or tether just one computer over bluetooth and share your connection via wifi. It's super easy on a mac, not sure about windows.
Benone said:
yeah, imagine you play in the bus online. cool!
Click to expand...
Click to collapse
ehehe...NO, MATE.... There's NO adsl connection where I live... So I can just use my tytn as a HSDPA modem and I use to share his connection on my PC, BUT I'm not able to share it throug wifi on my wii...
I really hope a coder could solve this... even if I'm not sure it's possible.
Lancealot said:
You could tether your Tytn to your laptop using either a usb cable or bluetooth, then setup an adhoc network through your laptops wifi connection. All you need to do then is do internet connection sharing between your bluetooth DUN connection and your wifi card and you should be in business to let your flat mates connect to your adhoc, which essentially turns your laptop into a router. Let me know if that helps or if you have any further questions.
I've done this myself with my mates and it works flawlessly.
Click to expand...
Click to collapse
yeah, cheers pal, I've already written about that above. I have this kind of network at my home frome the begninnig of using tytn. What I want is to stop using my laprop as a router, my tytn has everything to be a router itself, it needs just a piece of software. This thread is only about piece of software.
Joined this site a while ago, and needless to say, I've been literally blown away by it. The members of this site are just incredibly talented; I've been able to make my 8525 look and function just fantastic, and just about any fix/patch I've been able to locate through this site.
Currently using Custel WM6 rom and it's so stable and faster than the WM5 I had (though it was so hard to choose with so MANY excellent cooked roms to choose from)...
So, since it seems there's no limit to what can be done with these great devices, I was wondering if it is at all possible to use an 8525 to connect an Xbox 360 to Xbox Live?? I am able to connect using Internet Connection Sharing via USB to my laptop running Vista Ult. and get great surfing speed, so is there any way to somehow configure it to get the 360 to connect to Live through it? Could the 8525 be connected directly to the 360 (prob not likely) or can it be set up using the laptop to share the connection??
Any help/answers on this would be greatly appreciated!!!
I may be wrong, but I don't think that this is possible.
As far as I know, the xbox has no bluetooth pan support, and I don't think it is possible to have an USB modem directly setuped.
The remaining possibilities are: through the RJ45 or through the wifi. Sadly the hermes has no RJ45 connector, and it is unable to become an acces-point nor an add-hock host.
I just wanted to say that the idea of using a Hermes to connect an xbox 360 to xbox live would be just about the coolest thing ever done with a cell phone.
Is it possible to connect a 360 to XBL via a PC/laptop?
Dammit!!
Well, was worth a try, especially before tangling myself in wires trynna wing it... Guess I will be calling those Optimum guys for my XB Live fix...
Precisely what I was thinking. Was sitting here surfing using the phone as a modem, getting great speed, then thought, 'hey it would be cool as f%#$# to connect to Live with this...' I mean, I know the 8525 could probably handle it... The question is, what CANT this phone do?!
HOLLIDAY1183 said:
Joined this site a while ago, and needless to say, I've been literally blown away by it. The members of this site are just incredibly talented; I've been able to make my 8525 look and function just fantastic, and just about any fix/patch I've been able to locate through this site.
Currently using Custel WM6 rom and it's so stable and faster than the WM5 I had (though it was so hard to choose with so MANY excellent cooked roms to choose from)...
So, since it seems there's no limit to what can be done with these great devices, I was wondering if it is at all possible to use an 8525 to connect an Xbox 360 to Xbox Live?? I am able to connect using Internet Connection Sharing via USB to my laptop running Vista Ult. and get great surfing speed, so is there any way to somehow configure it to get the 360 to connect to Live through it? Could the 8525 be connected directly to the 360 (prob not likely) or can it be set up using the laptop to share the connection??
Any help/answers on this would be greatly appreciated!!!
Click to expand...
Click to collapse
Just tried it. Plugged it in and enabled Internet Connection Sharing, and the phone starts charging, but says "Check USB Connection" I'm not much of a hacker, so I can't attempt any driver\software hacks to get it working. You'd probably have to write a driver for the XBox to recognize the phone, and possibly vice versa. Definitly possible. Probably never going to happen though.
I'm doing it now. I connected the 8525 by USB to my computer. Then I open up the Internet Sharing program that uses the phone as a USB modem (I'm using Black Majic ROM btw). Then I select connect on the program on my 8525. Once it connects, I go to my Network Connections on my PC. I have the RJ-45 connected from the XBOX 360 to the ethernet port on my PC. I click once on the connection that says Local Area Connection # (mine is 13, everyones would be different) Windows Mobile Based Internet Sharing Device, then I hold Ctrl on my PC keyboard and click on the other connection (the one for my ethernet port). Once both are highlighted, you can right click on either one and select Bridge (I believe thats the one, anything that says Bridge on it) and let Windows bridge the connections and you should be set. Sorry if my explaining isn't very good.
Via a PC it should indeed be not an issue (as explained above).
To do it directly, it should work with an ethernet-bluetooth bridge. I'm
using 2 ethernet-wifi bridges to connect a TV and a PC to a wifi router,
but I'm pretty sure ethernet-bluetooth bridges also exist.
Jörg
Wow, according to drodri I was pretty close to having it right before... I will try that setup in a sec... also, is there a way to incorporate my wireless-G linksys router into this, or no? Is that in Vista?
I appreciate your input... I've done exactly the same as your setup, and when I go into Network Connections, it has the 8525 listed as Remote NDIS based Internet Sharing Device (Internet Connect #5) & the ethernet connection as Local Area Connection (Unidentified Network)... In the Network and Sharing Center, do I make the ethernet connection Private, or leave it Public? Or does it matter at all... because it still for some reason won't connect to Live, it still fails the IP test... there must be a setting or configuration I'm missing here, I just know it
You could also possibly use an ethernet to wifi device (wireless access point) to go from ethernet to wifi on the 360, then use a wireless network to the TyTN (ad-hoc mode rather than ap mode) and use that to run the connection..
but..
a) its an expensive way to do it
b) it needs extra hardware
c) it may not work (can the tytn do ICS over wifi rather than usb? DUN mode may work on the newer roms that will have it - but does DUN work over wifi)
d) the access point would need to initiate the connection to the phone while also doing dhcp for the xbox.. it should work.. and id try it for you.. except that it seems like a horribly complex way to do it.
Hmm... maybe I'll give it a shot.
Where there's a will, there's a way
I think the ideal goal here would be straight from 360 to Hermes. USB or wifi, with a small adaptor if needed. It would be beautiful if someone could write drivers so you could just plug 'er in with USB and use the built in Internet Sharing on the Hermes.
Obviously those are high hopes, and in a perfect world everything would automatically work like that. *drools over universal compatibility*
dtx said:
I think the ideal goal here would be straight from 360 to Hermes. USB or wifi, with a small adaptor if needed. It would be beautiful if someone could write drivers so you could just plug 'er in with USB and use the built in Internet Sharing on the Hermes.
Obviously those are high hopes, and in a perfect world everything would automatically work like that. *drools over universal compatibility*
Click to expand...
Click to collapse
For USB The problem is the driver would have to be on the 360.. it's 100% impossible.
Even if you can run unsigned code on your 360, you'd also have to be some kind of coding,hardware modding, hacking junkie to even try to write a 360 driver; on top of which to do it for a crazy reason like interfacing to one mobile phone... that would be die hard madness!
Microsoft on the other hand could probably whip it up in 5 minutes as the xbox already supports everything that's needed except an RNDIS driver to enumerate the phone as a network card. Problem being the target audience is small; possibly even just you guys
Wifi is more likely to happen as you dont really need to modify the 360, if someone wrote a driver to make the phone look like a wireless AP (if thats possible with its wifi chipset) and assuming ICS on WM6 supports wifi connection to the PC/360 (im not sure it does) then it should work fine. (Has anyone checked if the 360 wifi adapter can support a connection to non-ap ad-hoc wifi? if it can then this might work already if you very lucky - i dont have the wifi link for my 360 or id try it)
sambartle said:
.......if someone wrote a driver to make the phone look like a wireless AP (if thats possible with its wifi chipset) and assuming ICS on WM6 supports wifi connection to the PC/360 (im not sure it does) then it should work fine. (Has anyone checked if the 360 wifi adapter can support a connection to non-ap ad-hoc wifi?....
Click to expand...
Click to collapse
Does anybody know if there is already software to make the Hermes a WiFi-Router or make ICS make select WiFi?
I'm going to try this tonight with my regular xbox
There are already instructions on this forum for using your device as a wifi access point. It seems pretty straight-forward. So you should be able to connect any wifi client, including a wifi capable Xbox 360.
8525 / Hermes wifi AP
Hey, I actually did something similar since I didn't want to buy a $100 wireless adapter. I have a PC (but can be done with a laptop) with a wi-fi connection near my 360 all I had to do was use a patch cable to connect the PC to the 360. I am running vista, but Patch cables are hardware that tells the network card they are attached to a like device. It automatically shared my connection and we were able to go on-line. There were other ways I found that suggest changing router settings and such, but this was the easiest way. All you need now to use your phone to get your 360 on-lin is a computer
I've done tons of searching for solutions to my internet connectivity problems in my house.
First off, I don't have a job; so therefore there is no money coming in so I can make this simple and easy. Do not tell me to buy a wifi adapter or something like that.
I know that the HD2 with the bone stock hd2 rom from T-Mobile has the WMWiFiRouter app that allows you to share a WIFI CONNECTION (NOT 3G/EDGE) via usb to a device (computer, xbox, etc).
Well, now HD2 has the droid option and I upgraded. Running android via root, not SD.
I need to know if there is any app, or anything out there that will let me use my WIFI CONNECTION FROM MY PHONE, AND TETHER IT VIA USB TO A DEVICE. I do not have 3G/EDGE connectivity, so thats not a path we can go down. I want to connect to the wifi in my house, and share that connection from my phone to a device via USB. thanks.
delirium5 said:
I've done tons of searching for solutions to my internet connectivity problems in my house.
First off, I don't have a job; so therefore there is no money coming in so I can make this simple and easy. Do not tell me to buy a wifi adapter or something like that.
I know that the HD2 with the bone stock hd2 rom from T-Mobile has the WMWiFiRouter app that allows you to share a WIFI CONNECTION (NOT 3G/EDGE) via usb to a device (computer, xbox, etc).
Well, now HD2 has the droid option and I upgraded. Running android via root, not SD.
I need to know if there is any app, or anything out there that will let me use my WIFI CONNECTION FROM MY PHONE, AND TETHER IT VIA USB TO A DEVICE. I do not have 3G/EDGE connectivity, so thats not a path we can go down. I want to connect to the wifi in my house, and share that connection from my phone to a device via USB. thanks.
Click to expand...
Click to collapse
You know...4 sum1 who needs help, u do have quite an "attitude"....Here's some advice, Try presenting ur question in a pleasing manner n u'll get d help u seek...