Can anyone tell me the truth ??? Is it possible or not ?
My previous GSM was a Motorola Timeport. When I had to telephone someone, I just spoke the name of that person, and my Motorola dialled the correct number.
For example I said "Parents", and the phone number of my parents was automatically dialled.
Can I do such thing with my BT headset Sony/ericsson HBH-35 and my Qtek 2020 ???
Some people say it is totaly impossibble ???
I cann´t tell you, if that would work, but i know, that you can use voice dial via some extra software. It works well.
What i don´t know, if you can use your BT for Voice recognition....
Stefan
Aha, thanks Stefan. ( we have almost the same flag - lol ! )
So voice-recognition would work, but only with the microphone of the Qtek itself, pobably not with bluetooth....
So I guess I have to use speed dial in the car...
yes, it´s possible with microsoft voice comand, try it¡¡ it´s very easy to install and very funny.
srlobo said:
yes, it´s possible with microsoft voice comand
Click to expand...
Click to collapse
I assume you mean that voice-dialing is possible, NOT voice-dialing through a BT headset. Right?
From all of the information I have gathered, voice-dialing through a BT headset is just not possible at this time. If you have gotten it to work, I'll bet there are thousands who would like to know how you did it! :wink:
yeah i believe that there is some bluetooth profile required
there are some threads about it somewhere in hacking it forum
Rudegar wrote:
yeah i believe that there is some bluetooth profile required
there are some threads about it somewhere in hacking it forum
Click to expand...
Click to collapse
I have searched and can find nothing that indicates that voice-dialing through BT works yet. There is a great deal of discussion, but no solution (that I can find). I believe that a BT HandsFree profile is required, but not included with the Himalaya BT implementation.
We can certainly hope that one is included in WM2003 SE, should that actually make it to this platform.
some people were talking about if it was possible to use the ipaq bluetooth stack on a xda2 if that works
I'm using Voice Dial sinse 3 month and it works grate. Even in the car I can ask any contact of my data base ( +/-1000) name of contact + mobile or at home etc... The program ask you for confirmation by reading once more the contact name and asks if this is correct.
If you say "yes" it compose the request phone number.
I'm using HBH 65 BT headset for phone and the intergreted micro from Qtek for voice recognition.
Try it for free at : http://www.fonix.com/page.cfm?name=product_fonix_voicedial&ID=14
I have the french version
So Kiyeko -
Are you saying that you can press the button on your BT headset, say a name from your contacts list into the microphone on the headset and the i-mate/XDA II/MDA II/QTEK 2020 will dial the number? If so, I would be interested to know what software recognizes the headset button-press as the initiator of the voice-dialing software.
I have tried Pocket BT Tools with Fonix Voice Dial and was never able to get it to recognize the headset button press as the initiator of the program. Oh, by the way - I tried it with the MS program as well.
Returning to the initial question posted by mvb95.
Yes, with your hardware (Qtek 2020 and HBH35) is possible to use voice recognition to put the calls.
You must install Vito Voice Dialer PE v3.0. Eventually assign a hardware button to the voice dialer. Record all the tag voices you want.
With both devices paired and turned on (HBH35 blinking green), press the hardware button assigned to Vito and say the tag (e.g.: “John”) to the headset. You don’t need to use the Qtek speaker, don’t need to press the HBH35 button, nor confirm the recognition with “yes”, like in the Fonix.
Is simple and ease.
vmgps wrote:
say the tag (e.g.: “John”) to the headset.
Click to expand...
Click to collapse
Are you SURE it is using the headset microphone to input the name? I have downloaded and installed the program, then set a hardware button and recorded some voice tags.
When I press the hardware button, it does not activate my HBH-30 to input the tag, it records it with the device's microphone.
Are you using Pocket BlueTooth tools?
Hi Brian:
I use it always in my car.
My hardware: Qtek 2020 (Rom: 1.72.00WWE, Radio version: 1.14.00) and headset SE HBH-35.
I have tried several times covering the microphone hole with my finger and, by other side, speak to the headset 2 or 3 meters away from the Qtek.
With Vito you don’t need to say “Call John” but only “John”.
I don’t use the Pocket Bluetooth Tools because the latest Rom has the Bluetooth headset profile improved and this software doesn’t work with my car kit handsfree Nokia.
I can’t put my hands on fire, but the only thing I’m sure is that I can talk normally with the Vito Voice Dialer and the headset in my car.
Related
Is it possible to set-up the XDA2 to make handsfree, voice-activated 'phone callls from a BT headset? Nearly every mobile I've owned had this and I feel it's vital - I don't use Tomtom or anything like that so the XDA isn't in a ceadle which I can get to.
Microsoft Voice Command
I've just read about this but again doesn't support BT headset usage - I don't think the Fonix Voicedial on the O2 UK site would do that either.
I think I run the program, then my BT can read what I m trying to say to the program.software
well... is there any development on making voice dialling/bt headset work on the himalaya now?
fatboyslimfast said:
Is it possible to set-up the XDA2 to make handsfree, voice-activated 'phone callls from a BT headset? Nearly every mobile I've owned had this and I feel it's vital - I don't use Tomtom or anything like that so the XDA isn't in a ceadle which I can get to.
Click to expand...
Click to collapse
Hi,
Microsoft Voice command works very well for me, even in a moving car. The only problem is you do have to press the hot key to activate it. One the number is dialed, my bluetooth car kit activates.
Mac
Does any known how to detect when user press answer button on headset? What event or message generated by system? I find only some event that occurs when user insert headset jack in phone.
The AG service gets a "AT+CKPD=200" message
What i'm interestet in ; How do you send these AT commands ?
I'm sorry, but what is "AG service"?
Audio Gateway.
As far as I remember WM5 has standart API to register AG message handler. WM2003SE and older don't have a standart way.
It's not good. I'm interested in WM2003
Voice Dialing via Bluetooth NOT available on Atom
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Re: Voice Dialing via Bluetooth NOT available on Atom
Camstech said:
I thought that when I bought my Atom I would have voice dialing over a Bluetooth Headset. My friend has an Exec and it works fine. However, not with the Atom. Even the latest ROM doesn't support it. I have 4 headsets, all pair in Handsfree profile, all have call answering, call ending and last number re-dial working perfectly, but none will initiate voice dialing with the Atom, but all will voice dial with my Nokia 6230.
Therefore it is not a WM5 built in feature and is still ROM dependant. It doesn't matter whether you use the built in voice program, Vito, Neuvoice or M$ Voicedial, the stack simply won't support the AT command.
C'mon O2, it's about the only thing that is crook with the Atom. Other than that it is just the worlds best pda/phone!
Click to expand...
Click to collapse
Couldn't agree more!
About voice dialer. I thought it was just because Atom needs bluetooth headset button to be pressed for a while to launch dialer. It acts so with wired headset. Unfortunately, i have just one bluetooth headset to play with. And it turns off after 2 sec. holding the button.
On my Dopod 818pro everything acts like a charm (VD runs after a single press), so it isn't a WM5 bug.
can someone enable activating MS Voice Command from a wired headset for WM5?
it would be greatly appreciated.
Thanks,
I have the same problem using a bluetooth headset but if I use the wired headset supplied with my Atom it works fine.
that's good news. so, many OEMs are realizing the importance of this feature. so far, they have it in the Treo 700w and according to you, the Atom.
btw, did you have MS Voice Command pre-installed in your Atom, or did you buy it separately?
thanks,
The talk button on the wired headset is a "fake" button. It generates an special pattern in the recorded audio that it's recognized by the phone application.
It generates an special pattern in the recorded audio that it's recognized by the phone application.
Click to expand...
Click to collapse
Are you sure about that?
I've disembled quite a few headsets and the usual way is to shortcircut the mic-wire with one of the stereo-wires, whitch in return has to be cought by the mainboard and then translated to a command.
I'm not sure, but seems pretty feasible. That button is only used by the phone applicacion, which needs to open the wave input device.
Detecting the button pressing is pretty simple: recording at 16 bits, the average of the absolute value of the samples in complete silence is at least 100, with the talk button pressed, 6 or 7.
Hi.
I have Samsung wep250 Bluetooth headset, till now main button work on two ways:
- short touch call last dialed number
- long touch and release after first short beep call "voice command"
Long mode work perfect on Nokia N95, but now i have HTC Touch 2 Mega, witch was no any Voice command soft installed by default, so i install "Cyberon Voice Command" soft for tests and it work perfect, just call voice command from bluetooth headset not work.
Is there is some registry option or patch or else way to put this working?
Ygrek-Ix said:
Hi.
I have Samsung wep250 Bluetooth headset, till now main button work on two ways:
- short touch call last dialed number
- long touch and release after first short beep call "voice command"
Long mode work perfect on Nokia N95, but now i have HTC Touch 2 Mega, witch was no any Voice command soft installed by default, so i install "Cyberon Voice Command" soft for tests and it work perfect, just call voice command from bluetooth headset not work.
Is there is some registry option or patch or else way to put this working?
Click to expand...
Click to collapse
I have the same problem
http://forum.mobione.pl/index.php?topic=5775.0
this may help you (website polish)
MusX said:
this may help you (website polish)
Click to expand...
Click to collapse
Unfortunately, it does not work on Touch2. Besides, technical support of Cyberon wrote: "it depends on the phone vendor to decide whether they will enable this function or not. For more bluetooth supporting details, please refer to the phone vendor's technical support personnel."
Sugestion
Under "HKLM\SOFTWARE\OEM\VoiceCommand" : Path = \Windows\sddialer.exe
Work ok
Ygrek-Ix said:
Under "HKLM\SOFTWARE\OEM\VoiceCommand" : Path = \Windows\sddialer.exe
Work ok
Click to expand...
Click to collapse
Please describe in more detail what you did. In the Windows folder there is no such file as sddialer.exe.
Ups my mistake, this entry is for Microsoft Voice Command software.
For Cyberon i don't know, but about this soft: it will be perfect if this soft could also announce incoming calls.
I want to "revive" this old Thread, because i have the same problem. Maybe there is an resolution out there...?
Of course there is a little Workarround: When you start the Cyberon Voice Command-Software on your Touch and then directly press the Button on your BT-Headset the Voice-Command over the Headset works.....
HandsFree is not VoiceDial
Same problem and very unlucky for this, want to use Mega with bluetooth headset and voice dial.
Tried VoiceCommander, VoiceCommand and SpeedDial, all work but do not dial with pushing Bluetooth headset button.
Changed a lot of registry paths comparing Mega registry with my old HTC Herald (which support this feature) but nothing helps.
Asked HTC Customer Helpdesk and got the following answer: Mega support HandsFreeProfile which means car and headset connection for incomming calls - but not for outgoing calls. They further stated that MS stopped this feature generel in WM6.5 and provide extra programms only for special phones which are extra noted as "support voice dialing".
So it seams to be a problem of the current bluetooth stack in WM6.5.
Correct me if I am wrong, but there is no built in voice dialing capability tools included with the HD2?
I would like to be able to (like I have with the last 2 HTC Smartphones) be able to voice dial a contact over a bluetooth headset or car unit....
Any recommendations, or is this feature hidden somewhere that I simply have to activate? If there is an app I can get, preferrably free, please advise. Thanks!
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Thanks, so nothing is included with the HD2 then correct? Is there a free version we can get for our HD2 here or elsewhere of Voice Command?
eskasi said:
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
eskasi said:
Microsoft Voice Command is probably the best out there... its almost uncanny how you can just talk to your phone and ask it stuff with no training.... Call blah blah blah.... what are my apointments? .... open file explorer.... etc etc etc....
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
And that's on an HD2?
MSVC is pretty much the best out there...the other alternative is the Cyberon Speed Dial, but you do have to record for each contact.
eskasi said:
I use it with a bluetooth headset all the time to make and receive calls all the time.... calls received will have the caller's name read to me via BT headset
Click to expand...
Click to collapse
Which MSVC version are you using?
I've been having strange problems with my Blueant Supertooth light and MSVC 1.6.
The problems are:
- My Blueant doesn't terminate the connection after calls, the lights and speaker just stays on eventhough the call has been terminated.
- No incoming call announcement from the blueant device.
- Sometimes when I press the call button on my BT device, voice commander responds on the phone's speaker??
Weird... I didn't have the above problems with my TD, although I never could get the incoming call announcement to work as well.
on the same lines, is there any application to type what you speak? This way we could use speech to text instead of using the keyboard!
It is a huge letdown that the HD2 does not already INCLUDE a voice dialing application like the past several HTC phones have had, for years.
HTC needs to step up the plate and both provide this and make sure that bluetooth voice dialing protocols are in place.
Has anyone used the Cyberon app yet? I believe the one is called "Voice Dialer" and the other is called "Voice Commander", not sure what the actual difference is or if either work fully on the HD2.
Hi. I'm using Cyberon Voice Sped Dialer on my HD2 and have set up my voice dals.
However, when I go to use the voice dial I only every get the 'tone' through the phone speaker and no longer through my BT headset. I have a Jawbone 2 BT headset.
My Touch HD worked fine with it and you could dial using voice through the headset but I no longer can on the HD2.
Is there a way to fix this? Do I need different software or is it just one of those things?
Thanks.
Owen.
Hi,
Im having the same problems with my HD2 device. I have a parrot bluetooth carkit and with this new device it doens't work like it should because there is no voice dialing.
I've tried several programs like Microsoft Voice command and other voice command programs like VITO voice command and Cyberon.
Is there any program that just looks like the voice dialing on the HTC Diamond? I just want to record my own voice and use it with my bluetooth carkit.
Thanks,
187ed187
The problems with bluetooth is down to the HD2 using a widcomm bluetooth stack as apposed to a microsoft one. I personally havent found a voice dialing app that will work with the widcomm stack.
So what do we do now? I really love this phone but this is a huge problem for me...
Good question.... experiment!? E-mail voice recognition manufactures?
I have cyberon voice speed dial 1.2
I cant get it to work through my BT but I have sort cut on home that I press and it opens all my progs and dial contacts, one of the best things about my phone now I love that it opens all my programs...
I used to have a n95 and this put an auto voice tag on each contact and worked through any BT, shame the HD2 hasnt got an app that can do that ... and open my progs..
I'm also still waiting for a solution.
I have 2 bt handsfree devices on my 2 cars (Parrot and Blueant)...and MSVC only works for the first try after a soft reset.
After the first go, MSVC just goes thru the phone's mic and speaker. Very annoying when you still need to hold the phone up while driving AND you have a bluetooth handsfree device.
optiknerv said:
The problems with bluetooth is down to the HD2 using a widcomm bluetooth stack as apposed to a microsoft one. I personally havent found a voice dialing app that will work with the widcomm stack.
Click to expand...
Click to collapse
Is it possible for someone to cook a ROM with the MSFT bluetooth stack? Or is that too hardware/driver dependent?
You guys should check out the threat with the name: Voice Dial Removed! WTF?
Since I cannot post links yet I can't post the exact link but I'm sure you guys are able to use the search function on this website
Someone claims to have found a working solution for the problem, it's on the second page of the thread.. I'm going to test it right now
Edit: IT WORKS!! At first holding the call button didn't work for me, so I followed the instructions on the first page and now it works!!
Link :
Voice Dial Removed! WTF?
About to try it, hope it works with BT voice dial, if not then Duttys WM6.5 works as well as it can and includes the long press fix as standard.
Owen.
To install .CAB according to order of their numbering.
Do not forget to put a tick in Audio-adjustments sets (' To reproduce system sounds on removed set ').
I did not check it by myself yet.
I tried to make ONE .CAB but did not find apropriate software.
Let's try this way.
wandel said:
To install .CAB according to order of their numbering.
Do not forget to put a tick in Audio-adjustments sets (' To reproduce system sounds on removed set ').
I did not check it by myself yet.
I tried to make ONE .CAB but did not find apropriate software.
Let's try this way.
Click to expand...
Click to collapse
I have succeeded to activate the CVSD with BT Headset button press with the "4_CVSD_1.2_build_61226_1_BTHeadsetFixed.cab" given in the mail above.
But I can not hear the Voice Tag of the contact from the BT Headset but from the speaker of the HD2 as a confirmation to my speed dial speech.
And I have to check the screen when dialing started if I am motocycling
Any proposal to fix that little problem?
TUNCAYCETIN said:
I have succeeded to activate the CVSD with BT Headset button press with the "4_CVSD_1.2_build_61226_1_BTHeadsetFixed.cab" given in the mail above.
But I can not hear the Voice Tag of the contact from the BT Headset but from the speaker of the HD2 as a confirmation to my speed dial speech.
And I have to check the screen when dialing started if I am motocycling
Any proposal to fix that little problem?
Click to expand...
Click to collapse
Can you give us a little more information? Which ROM ver? Which other soft you installed? Did u use: 1_CyberonVoiceSpeedDial_1_2_b080227_0R3.cab ?
Isn't there an option in the BT setup, sending all systemsounds to BT?
I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???
Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!
Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.
I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.