Related
Hi Guys,
Just to say THANKS to everyone out there, not only the developers but the normal mortals too - who put in effort to help people here.
I have uploaded the Windows mobile 2003 to my site. Its on a super mega link (great words ) I get 1meg a sec+ when i download from it at work !
http://www.ali.nildram.co.uk/xda/
Cheers Guys
OK it's seems to upgrade the Radio any issues? What if I upgrade the radio to ATT's? Ideas thoughts anyone?
Salam
Thanks Ali-Butt
Othman
since phone upgrade i have noticed that gprs is a tad faster. 8)
Does it support Sim Tool Kit
Hi Ali,
Does this upgrade have the sim tool kit?
Thanks in advance :?:
isn't this the same version everyone has been using?
I just have to run the executable file right? I don't need an SD Card writer or anything for this download? just my normal connection and activesync? what if the upgrade screws up? can i reload the old ROM image? and where do i get it!
Thanks a lot!
hi from Riyadh
Hello again
well, what i have notice there are more then one version of WM2003
one of them which i downloaded from http://members.lycos.co.uk/xdarom/ where i couldn't downgrade using the nornal method and i was force to use SD Card to go back to my previous ROM but the other version which i downloaded from this FTP Server 195.64.88.44 xda/xda works pretty good and i was able to downgrade to XDA-Developers Special ROM version 1.2 with no problems and without using SD Card.
thanks again for sharing
Othman
http://www.pocketpc4arab.com
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
I upgraded my XDA last night via my USB cradle. I had NO problems at all. Took a little longer than normal :?: But other than that it was fine.
Gil
Gil,
did you use Ali file uploaded on his site ? Is your XDA UK or Asian version ? Which nr ?
Thanks,
no service
Can someone help a newbie out here - I installed the WM2003 no problems and then installed to 4.21.00 radio stack
but now my phone get's no service any ideas? Im in Texas on T-mobile
Please, see this link may be useful for you
http://xda-developers.com/forum/viewtopic.php?t=1687&start=75
brix3 said:
Is it possibile to upgrade to wm2003 thru USB cradle ? My current version for Asian XDA is:
ROM version: 3.14.17 ENG
ROM date: 10/11/02
Radio: 4.17
Protocol: 32S54
Has anyone tried to upgrade an asian XDA (EN version) ? Any problems ?
Thanks,
Click to expand...
Click to collapse
I had the same set upwith yours previously. I upgraded to SER 1.2 and WM 2003 after that. I also upgrade my radio stack to 4.21 from O2 UK. But now, I am back with SER 1.2 and Radio stack 4.21. I wish Icould go back to my old Radio Stack 4.17.
With 4.21 Ilost the "G" and signal strength for GPRS.
I hope my experience helps.
Beeheij, why didn't you keep the 4.17 radio version with WM2003 ? Was it not running properly ?
I think it's always dangerous upgrading the radio module with newer version dedicated to other regions (UK)
Thanks,
brix3,
I want to back to 4.17, but I cannot. Somehow during the process of rolling back I was kicked out.
As for the WM2003, the problem was in the SMS mode. When I picked a phone number, the "+"sign in my contact was not transferred tothe address in the SMS. So each time I wanted to send SMS, I had to correct the phone number.
My Battery Pack was not working. It hung my XDA.
Hope this helps
Has anyone in the US used or done this upgrade? Since it also upgrades the Radio Stack I'm just wondering. If GPRS is getting dropped as stated in other posts it is more that the network drops you or you lose data connection between cells, or the network has a load balance that give placement to voice users over data when bandwidth is needed. Not so much that your radio stack does it.
On the other hand just incase anyone wants to prove me wrong :wink: who in the US has upgraded their radio stack to O2 4.21 and experienced a better performance than AT&T's radio stack (speed stability as staed on their website) :?: This means you probably already had to manually switch the default band 8) first, right? :x
Let me know I love to be wrong :shock: ......I'm only that much smarter than I was yesterday :roll: :lol:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
i must admit this version of ppc2003 is the dogs danglys compared to the old ozone version
Phoxie_Phreak said:
I'm a little confused. I upgraded to XDA v1.2 and my Device Informations are:
ROM Version: 3.17.03
ROM Date: 05/15/03
Radio Version: 6.18.00
Protocal Version: 324e4
How is it that my radio version is so much higher?
-
Click to expand...
Click to collapse
as far as i know XDA v1.2 will not touch your Radio, it will just replace your old CE ROM with the new one which has lots of cool stuff.
regards
Othman
Hi,
Siemens SX56 Unlock
I would like to know if someone unlocked its phone by himself.
All we read is people from everywhere except with AT&T.
My ROM version: 3.14.03 ENG date: 09/27/02
Radio version 6.12 protocol 324e4
Frequency 900/1900 American model PW10B
Does the Rom Update 3.17 from xda-developers works with Rogers AT&T?
Can we expect our phone to live after that update?
Is the new ROM functionnalities user friendly? Would you rather keep the old ROM version both UNLOCKED?
If you got your SX56 unlocked, can you tell me what you did?
I'd like to have your comments on what you did before I do it.
After spending that kind of money, I wouldn't like to kill my phone.
So let me know how you did it and what did you need to update it.
I expect to get details from you.
Thanking you in advance!!!
The ROM has nothing to do with receiving the signal. It's the RSU part (Radio part of the device). ROM 3.17 should be fine with unlocking, but you may try this tool firls to keep your current ROM www.xda-developers.com\XDAunlock\
To determine the best RSU to use with your new network then you have to get some info about your device and the frequency of the network (900/1800 or 900/1900).
But ... get your XDA unlocked first then we'll see if it receives signal or not.
Good luck
I unlocked my Siemens SX56 from AT&T with the XDA Manipulator tool on this site. To use it, you need a serial cable for your SX56. I just made one. In reality, it would have been much easier to simply upgrade with the special edition ROM on this wedsite and use the unlock tool. The ROM upgrade should not effect the phone at all since it is the windows operating system and not the radio software (radio stack) which is a seperate upgradeable piece of software.
To be safe, just download your current ROM onto an SD card and then use a seperate SD card to upload the upgrade ROM. If you don't like the upgrade ROM, you can always restore the original ROM and the good news is that once your phone is unlocked, it's unlocked no matter what ROM you use.
Good luck, and upgrading ROM's using the SD method is really the safest way IMHO. You can find plenty of information describing the process on this site.
Panabax
I have searched this site (fantastic site BTW) but see a lot of conflicting statements (or at least it seems that way).
I have a TMobile MDA-I (US) PPC2003
ROM version: 4.01.16.ENG
ROM date: 02/04/04
Radio version: 6.25.02
Protocol version: 324e4
I want to keep 2003 but need to unlock the SIM. Is this possible and where is the information?
you need to "downgrade" to the SER ROM, unlock your machine, and then Restore back your ROM, or upgrade it to something else
What is the SER ROM?
what vresion to I have to downgrade it to?
Where would I find the software and exact steps?
Are they any issue with doing this?
www.xda-developers.com/SER/
or just try the unlock tool at www.xda-developers.com/XDAunlock/
Unlocking a T Mobile USA Pocket PC Phone Edition
All you have to do is call T Mobile USA's Customer Care and just tell the CSR you're going to be travelling overseas and will be using a prepaid SIM from one of the local wireless carriers over there. The CSR should be able to provide you with the unlock code provided you've had continuous wireless service with them for a minimum of 90 days and your wireless account is financially current. Cheers!
Thanks all, I like the overseas idea. Any hints as to places to travel where this is possible. I don't want to say I am going to the Bahamas (example) and have them tell me that the phone will not work there anyway.
Same Issue on PPC2003
I installed the SER and I'm still locked ("error finding unlock code"). Any ideas.
Radio Stack 6.25
SER ROM and XDAunlock or Manipulator cannot work under radio stack 6.25 (T-mobile USA) or A33 (Siemens AT&T).
I developed new tools to unlock them!
:wink:
Cgigate, have you posted the new tools to unlock that version of radio stack? Also is there any way of using xda manipulator imei feature under radiostack 4.21 as it is disabled one it meets this radio stack, I assume the developers have good reason for doing so.
cruisin-thru said:
Cgigate, have you posted the new tools to unlock that version of radio stack? Also is there any way of using xda manipulator imei feature under radiostack 4.21 as it is disabled one it meets this radio stack, I assume the developers have good reason for doing so.
Click to expand...
Click to collapse
I cannot test radiostack 4.21 or any 4.xx (GSM 900/1800)(PW10B1).
I'm Canada , same as US, GSM system is GSM 1900.
I'm using GSM 900/1900 version (PW10B1)
I recently purchased an AT&T SX56 and had it unlocked so that I can use it with T-Mobile service. It works great but it still has the old AT&T software on it Pocket PC 2002. I would like to upgrade to PPC 2003 which is available on the T-Mobile site, but I am concerned that flashing the device with T-mobile software will kill it. Has anyone had an experience with this? Will it work?? I can d-load the PPC 2003 from siemens for AT&T but I would rather have T-mobile.
Download it but only flash the ce rom part of it, dont flash the radio if you have a good working phone already, there is nothing there to damage your phone, people on this site have used roms from everywhere without problems, it is better to use the sd method for flashing using xdatools.
I tried the t mobile upgrade
but it told me my rom version was not compatible and aborted the upgrade. I have an att sx-56 that I unlocked by loading the special rom 3.17 ENG. So I'm running on that rom until I spot the next plan on here.
This rom is cool but can anyone tell me how to get the buttons to work when the phone is off again? Also the calendar language is not english any idea on where to set that?
Thanks love this site and the great people on here!
Scott
Use the kitchen at http://xda.weblink.net/ to cook a TMO 4.01.16 ROM and use the SD card method to over come the version verification.
Finished... for now anyway
Did as suggested above and then used t-mobile released version to upgrade radio... Now have the official t-mobile version of OS ROM and Radio. I miss the old special edition rom already!
Thanks everyone!
Scott
Hello,
I know that I should'nt have do that, but I need your help.
I upgrade my MDA on the following state :
Rom : 4.01.16 Eng
RSU : 4.21.00
For buisness reson I have to go back to the original state.
Rom : 3.18.01 ENG
RSU : 3.23.00
Unfortunatly I didn't do a Backup
I have acces to some MDA with the originale rom and rsu
My question is how to go back to the originale state, without destroying the other mda with the originale rom? via bootloader?
Thanks in advance
The ROM part is easy, you can get the original 3.18 ENG from the carrier devices site http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific
The RSU might be your nightmare especially that you have 4.21 which showed to be the pain for most people here ... anyway, in the same site you will find RSU 3.25 for Qtek ... it's almost the same as 3.23.
Good luck
Biso007 Thanks for you answer,
I look at your link but it seems to be the Qteck version, I really need the officiale t-mobile version.
Is there any way to save the originale one in one of the other phone that I have access and restore to my one?
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
ok I Download the old version on a new phone via OSimagetool to my sd card and put it on my device. working perfectly.
So now I just have to downgrade the radio stack to 3.23.00, where I can find it and how to downgrade?
I download the file here
http://www.t-mobile.at/business/mobiles_arbeiten/MDA/SWupdates/
Looks like it's working, (at least I have the right number at startup)
the only problems that I had it's that rhe rsupgrade was lauch every time I startup, I had to delete the file rsupgrade on startup folder. now it's working like before.
Thanks a lot.
By the way, does it exist a solution in mda to copy contact name to the sim card?
pjfuerte said:
Biso: Is the rom found in http://www.carrierdevices.com.au/downloads.php?region=Asia Pacific WM2003? What radio version it contain? Is it compatible with PW10B1 device?
I'm now running T-Mobile ROM 4.01.16 ENG, Radio 6.25.02. I'm plannning to change the Radio to be compatible with Asia-Pacific and in the US (I've been going to Asia and back to the States for business, so I want a device compatible with both Asia-Pacific and US). Thanks
Click to expand...
Click to collapse
No, it's PPC2002 and the RSU is 3.25 for PW10A devices (900/1800). I know it coz it was on my device before I replace the mother board with a B-type one.
If you are going to use 900 MHs network in Asia you can keep your current RSU ... I have it on my device and my network is 900/1800 ... other than this you better use 2 phones or get a new XDA II
sebs said:
By the way, does it exist a solution in mda to copy contact name to the sim card?
Click to expand...
Click to collapse
Dealing with the SIM book is a matter of s/w and the device type (XDA or MDA or ... ) has nothing to do with it. You can find many freeware s/w to deal with the SIM entries.
ok thanks a lot, do you just have the name of one of this freeware?
try this http://www.pocketgear.com/software_detail.asp?id=7496
don't work for me
Requirements: Pocket PC 2002("Not Microsoft Phone Edition or Pocket PC 2000)
Click to expand...
Click to collapse
always looking for gsm phone.
Say choose flexport extra if you have running voice gsm installed on this device, but i dont have the option.