Hi,
I've just purchased one of these head units for my car. I can connect my phone to it via Bluetooth just fine for calls and music, but I want to connect the head unit to my ODB2 bluetooth dongle so that I can create a Torque dashboard for it.
However, when I go to the general settings, Wifi is listed but Bluetooth is not. I've searched and searched but there is no way for me to connect the head unit to a Bluetooth device. I've tried various third party apps that claim they are able to enable Bluetooth and connect to devices, but they all just seem to hang when I try to enable Bluetooth. Tried a system reset too, but that Bluetooth option is still missing from the settings menu.
Please can anyone help?
G
I'm also interested in knowing this. Torque doesn't seem to detect my bluetooth ELM327 at all. I also attempted to connect a USB-based ELM327 module, and Torque seems to detect it, but it doesn't work beyond that, and the headunit gives me a low-power warning light.
Hi did you get anywhere with this I have the same problem can't get Bluetooth options to show
I have exactly the same problem. I'm running a PX5 unit from Witson. Custom built for a Koleos. MCU is not a standard MTC device. I have no bluetooth option available in the settings and the stock bluetooth app does not display any search option whatsoever. It seems that it broadcasts itself for other devices to detect it but you can't search for devices. Seems like they may be handling the bluetooth via the MCU directly and not via android which is strange because they openly claimed that this device was compatible with the OBD II dongle that I purchased. They even shipped it in the same package. Will keep looking and post if I find anything.
I had the same problem with a different Chinese head unit. Solved by buying a WiFi ELM327 dongle which connected fine with the head unit's built-in WiFi.
Update to my earlier post...I managed to get mine working over BT with the WITSON unit. In the end I had to disconnect my phone completely and reboot the unit. Then I found a search option on the dialer page. Searching found the OBD II module and I was able to pair with it. After I was paired with it I was able to add my phone again and both can run in parallel. I have not been able to test much but it seems like this continues to work until the unit goes into a deep sleep and shows the startup logo again. If that happens then I need to go through the learning process again. Meh...
Hi friend, just a question, in the dialer where did you find the search option I cant find it in my android radio??
If you have the swm 8802 you cannot connect to obd2 this requires bluetooth 4 and the 8802only support bluetooth 2
Always Connect ODB First
The ODB readers are a tad picky but they connect using the same menus as any other BT hardware (headset, speaker, etc). First, turn on the car ignition, do not start.
2. Make sure no other BT equipment is connected to the head unit or even on & near by.
Next, place the head unit in searching/Discovery mode and then & only then plug the ELM BT Module into the car ODB II Port. Most cars must be 96 & newer. 95 GM with for the plug but won't work. They're usually ODB 1.5, don't ask, your screwed.
Finally wait for the module to pop up and ask for the code, it's 1234 not 0000.
After your paired, THEN open Torque and let it connect. Don't start the vehicle till the car icon stops flashing.
You should be good to go from then on. If you ever have problems after that. Make sure the app is totally closed, force stop and then follow this procedure again.
---------- Post added at 07:55 AM ---------- Previous post was at 07:30 AM ----------
vincentstans said:
If you have the swm 8802 you cannot connect to obd2 this requires bluetooth 4 and the 8802only support bluetooth 2
Click to expand...
Click to collapse
Mine connected no problem. Did it just like I do on my phone. I just got mine too though. Could be an update maybe
the original question wasn't answered and I have that problem too. I don't have a Bluetooth discovery/search option anywhere. the small bluetooth-like icon on the main panel just changes the color of the leds.
so can't connect new phone. although Bluetooth seems to be working, since an older phone, already paired, is still working.
Following this as my head unit is same. Theres no blietooth menu/option but it connects to a phone.
Ive tried a third party bluetooth manager but all that says is bluetooth disabled by admin??
A fix
That happened to me trying to add and ODB2 bt dongle. I had to use the app for bluetooth linking provided by the head unit. When I purchased the unit, I changed the bluetooth discovery and pairing code to 0000. Well, changing it to 1234 allowed me to add the ODB dongle.
I saw it on a YouTube video, and well, it worked for me. (And no, no native bluetooth option, came disabled for my unit as you said)
Hope it works for you too.
same problem with me
Hi sir did you found solution for this problem. I also have this problem with my native bluetooth. when i turn open system setting bluetooth missing. i try to open using shotcut and found shotcut to turn on bluetooth but when i turn on. it do nothing.
I can play music, make call using bluetooth app provide from head unit. Problem is i cant use it with OBD2 . same with your statement this bluetooth only stream signal to other. this Head unit cannot find other bluetooth.
Kindly please assist me. did this head unit still have hope to turn on native bluetooth or not. I still search many post regarding this issue. But issue bluetooth like this not many discussion.
Hello there,
My problem is some how different. My hu use the bluethoot to find the obd2 adapter but there is no dedicated pair button. I can pair my phone for calls and music but connecting from phone to hu.
My unit is a 8227l from seicane.
Has anyone any solution? Thank you!
blongro said:
Hello there,
My problem is some how different. My hu use the bluethoot to find the obd2 adapter but there is no dedicated pair button. I can pair my phone for calls and music but connecting from phone to hu.
My unit is a 8227l from seicane.
Has anyone any solution? Thank you!
Click to expand...
Click to collapse
Change the pair code in the bluetooth custom app provided, to 1234 and try again.
I had this happen and I think I figured it out.... in factory settings there's an option to choose bluetooth connect automatically or with pin. I checked with pin and was able to pair. I think the options are reversed in the settings
I have the same problem i can't connect to the android 7.1 car head unit any more , the bluetooth setting is missing , the wifi settings appear but bluetooth doesn't appear any more
Anyone can help me to fix this issue please ?
Karemz said:
I have the same problem i can't connect to the android 7.1 car head unit any more , the bluetooth setting is missing , the wifi settings appear but bluetooth doesn't appear any more
Anyone can help me to fix this issue please ?
Click to expand...
Click to collapse
I bought a bluetooth usb adapter and I can't select it on the system. I think this would be the way out, but we need to replace the driver inside android. Does anyone have any ideas?
venomrocha said:
I bought a bluetooth usb adapter and I can't select it on the system. I think this would be the way out, but we need to replace the driver inside android. Does anyone have any ideas?
Click to expand...
Click to collapse
I have a Teyes Spro with the same Bluetooth issues as most on this post describe. Did you find an answer to your usb adaptor to solve the Bluetooth problem? I was told to add a line to the config.txt file but cannot locate where to access that to add it.
Bought a Teyes Spro headunit and I have a problem with Bluetooth discovery on my obd II and tpms modules. Does anyone know what is in the "Developer" tab? It is password protected not accessible. The 168 factory access code does not work for it. Anyone know the password?
Related
hi guys
new to the forum, hopefully someone will be able to help me
my unit has stock MTCC-KLD6-V2.97 Aug 02 2016 with a RK3188 and 1024x600 screen
Firstly the Bluetooth is not working, quite a lot of apps hang at the part where it try's to turn the BT on, especially one app i really need to work.
I honestly don't know what model of BT chip is installed in the head unit, apparently its BT 4.0 as listed on there website
I have been into the factory menu and changed the BT from WQ_BC6 to WQ_BC6B (as suggested somewhere in this forum) but it has made no change and the BT is still hanging at powering on.
Eonon have told me that the Bluetooth only work with devices that don't require a pin and the radar detector device i need to connect does not require a pin but still it does not work.
Not quite sure if eonon has set the setting wrong and i need to change it or i need to goto a custom rom or I need to pull the unit apart to find out.
Found someone else having trouble getting there ALPconnect app to work aswell on these units, in know ALPconnect wont work on older unit like the 4.4.4 as they only had BT 2.0 and the ALP BT only supports 4.0, but this android unit has 4.0 so it should not be a problem but it is.
sterod said:
The app I use, ALPConnect, does the exact same thing. Fortunately, the hardware on mine includes a hardwired speaker and GPS setup that work standalone. The benefit of the app was to get a nice big visual notification of a trap, as it would come into focus, duck the audio and play an alarm. It would also report the frequency of the radar and the type of laser hitting me. While I can get by without all that, I can't have the music blaring like I usually do, as the little speaker is only so loud and the Joying head unit doesn't have Mute Input wire to duck the audio.
While this is going slightly off topic, you may want to look into the AL Priority, it can interface with your V1 too and you will also gain laser protection. This thing has saved my a** countless times and paid for itself already many times over.
Click to expand...
Click to collapse
Secondly the control menu in the android head unit for accessing the cars buttons via cambus does not work, all steering wheels button seem to communicate back and work, but i cannot set my clock on my mazda 3.
Also have noticed that the radio wont mute when notification occur or when using other apps like google maps, no way to set the different volumes in this stock rom. Have played around with the factory menu volumes but it makes no diffidence.
Is it viable and worth changing to a different ROM, like Malaysk? or should i message eonon?
any help would be much appreciated
thanks
shane
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
zandrm said:
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
Click to expand...
Click to collapse
Waiting on a reply from Eonon, but initial news is not good.
Some serious BT issues in this model the MTCC
Anyone know if any Malaysk's Rom's avalable for the MTCC-KLD6-V2.91 that have no BT issues
I'm having the same issue, though my unit (MTCC KLD6) does not show any devices at all to pair with, and the car unit does not appear on my phone.
I'm wondering - if I take a usb BT dongle and attach it to the usb cable, would that work?
I think it might be another issue with your BT, it should connect to your phone at very least.
Have you had a look in your factory menu to see if the MCU has the Bluetooth option set?
Password for me was 126
Unfortunately the unit does not support external USB Bluetooth and probably never will, unless the manufacturer MTC/Klyde adds the required drivers to the unit or a Awesome developer by some stroke of luck here adds it to the unit. I doubt to see the feature in this unit
Sent from my iPhone using Tapatalk
Thanks for the reply. Yes, i checked to make sure Bluetooth was enabled in the system settings. I've tried a few of them (change setting, reboot, attempt pairing), i guess the next step is to try them all one by one to rule that out. I've sent an email to the seller to see if they have any ideas.
The vendor told me to connect the Key-1 & Key-2 wires from the canbus to the car, not sure why they'd think that would solve BT issues?
Did this fix the issue? I'm unable to see any Bluetooth devices and other Bluetooth devices don't see it.
Sorry to dig up an old thread
I have the Eonon GA2180a (android 10) - and having similar issues to here
I want to pair a bluetooth remote (read, steering wheel controls) to the head unit, but the bluetooth search just shows blank! I can connect to it using my phone but it appears some things are hidden to connect to with these android units? Looks like the bluetooth 'app' is the only way to connect too, theres nothing in the android settings to access a bluetooth menu or anything.
Did anyone get anywhere with this ?
cheers
Hi All,
Recently purchased and installed a Joying head unit (4GB, PX5 Octa Core) (link to product)
As this head unit runs android I am trying to tether the mobile data on my android mobile over to the head unit via the bluetooth tethering function. Problem is I dont think its working. Does anyone have any experience with this or know how to get it working?
Steps:
On the mobile, make sure its connected to mobile data
On mobile, turn on bluetooth tethering
Pair mobile and head unit via bluetooth
Still no internet access
Can you access data via hot spot? Make you mobile device a wifi hotspot and connect the headunit to your hotspot.
Sent from my ONEPLUS A5010 using Tapatalk
chper said:
Can you access data via hot spot? Make you mobile device a wifi hotspot and connect the headunit to your hotspot.
Click to expand...
Click to collapse
Yeah I tried this and it works fine. I just though it be better to use bluetooth tethering seeing as the phone is already hooked up to the head unit via bluetooth. Using the WiFi hot spot option just adds another process to the mix.
Because Joying remove a lot of the standard android setting I was thinking there might be a way to access the default android settings again to be able to play around with bluetooth properly. While writing this thread up however I did email Joying about the ability to bluetooth tether and their response was:
"Our head unit can not support Bluetooth tethering"
Hi, I am trying to achieve the same solution however I do not think it's possible. My understanding is that the bluetooth connectivity allowed by the hardware in the head units doesn't cater for the 'full stack' of bluetooth functions, so we're stuck with telephony and audio only with no data transfer.
I would *really* love to be corrected though! It would be great if it could be solved by software alone.
Failing that, could a bluetooth USB dongle work to provide full BT support?
proto__ said:
Hi, I am trying to achieve the same solution however I do not think it's possible. My understanding is that the bluetooth connectivity allowed by the hardware in the head units doesn't cater for the 'full stack' of bluetooth functions, so we're stuck with telephony and audio only with no data transfer.
I would *really* love to be corrected though! It would be great if it could be solved by software alone.
Failing that, could a bluetooth USB dongle work to provide full BT support?
Click to expand...
Click to collapse
I consider this a bug. It did work on the Sofia 3GR units on Android 6.0.1.
It (currently) does not work on the Android 8 PX5 FYT units (like the OP has as well). Can't say anything about the QD units.
Well that gives me some hope at least.
I did note at least 3 'Bluetooth' apps running on my device (that I've been playing with since my previous post).
Perhaps a custom mod may be the answer...
Sorry proto, I've had about five units and all the same. You're right and it sucks. I don't think it's a big as I've come across it many times and only in a few eBay postings did the seller actually specify it has a general bluetooth connection. Otherwise toy even have to buy their obd to get that to work
Sent from my SM-G950U using Tapatalk
Ok thanks for the replies. Hopefully it will be fixed with a firmware update in the future or something.
Is there are any news about this Bluetooth tethering?
I am really interested because my WiFi is really really slow...
I saw that some Bluetooth function are missing, like the possibility to remove paired device or select Bluetooth tethering.
It’s highly unlikely Joying will fix the Bluetooth, they would need to produce a seperate rom with normal BT configured and u would not have access to the Joying BT app.
Currently Joying route all Bluetooth communication via a service called btlink, from there it goes to the joying bluetooth app.
Joying have fundamentally changed the way the Bluetooth is configured so it functions with only their software.
All these headunit manufactures do this to the BT so it functions with their software and they never offer a fix
shanetrainST said:
It’s highly unlikely Joying will fix the Bluetooth, they would need to produce a seperate rom with normal BT configured and u would not have access to the Joying BT app.
Currently Joying route all Bluetooth communication via a service called btlink, from there it goes to the joying bluetooth app.
Joying have fundamentally changed the way the Bluetooth is configured so it functions with only their software.
All these headunit manufactures do this to the BT so it functions with their software and they never offer a fix
Click to expand...
Click to collapse
From which library/framework/binary/whatever is this btlink service started/called?
surfer63 said:
I consider this a bug. It did work on the Sofia 3GR units on Android 6.0.1.
It (currently) does not work on the Android 8 PX5 FYT units (like the OP has as well). Can't say anything about the QD units.
Click to expand...
Click to collapse
Remember that it only worked with a HACK. Joying intentionally disables this functionality.
Bluetooth information
Init.sy.rc
Service blink /vendor/bin/blink
Init.connectivity.rc
Chmod 0666 /dev/tty (This should be tty00)
Now I have modified mine but I think the system/vendor/ect/Bluetooth/bt_vendor.conf is set to
- UartPort = /dev/tty00
Blink is interacting with /dev/tty
Android system is interacting with /dev/tty00 ?
Hopefully all the information is correct as I have modified my unit lots to try give back the Bluetooth to the system and I didn’t keep many notes.
But in short the the system is trying to access the Bluetooth on the wrong Uart port, where as the blink is attaching to the tty device, allowing the joying software to work.
This prevent the android system & apps interacting with the Bluetooth.
Also this is the test app I have been using to try to get it to allow permissions to turn BT on, but it get denied every time
Bluetooth Discovery : Bluetooth LE Scanner
https://play.google.com/store/apps/details?id=com.manjul.bluetoothsdp
i have the 10.1 american version.
if i remember correctly, bluetooth has an issue when your using it as a "media" access point
i think the bluetooth is set for A2DP... probably physically somehow.
shanetrainST said:
Init.sy.rc
Service blink /vendor/bin/blink
Blink is interacting with /dev/tty
Android system is interacting with /dev/tty00 ?
Also this is the test app I have been using to try to get it to allow permissions to turn BT on, but it get denied every time
Bluetooth Discovery : Bluetooth LE Scanner
https://play.google.com/store/apps/details?id=com.manjul.bluetoothsdp
Click to expand...
Click to collapse
Did you try to create a symlink like
Code:
ln -s /dev/tty /dev/tty00
And is it indeed tty00 or tty0?
Did you give the scanner root access?
Bumping this for a slightly odder issue. I'm trying to connect my Joying stereo to a Hondata KPro ECU, it sees the ECU but refuses to link to it in settings, rendering apps like Hondata or RealDash useless, so in turn I'm using a crappy $20 tablet until someone can show how to fix this BT issue.
Joying was no help other than to tell me to buy their OBDII adapter, which I did, but LONG story this is a 2008 Honda engine in a 91 MR2 that has no OBDII port. I've bought an OBDII port off eBay and tried using pinouts from the ECU to hack together an OBDII port but no luck.
Having it via Bluetooth would be easier, it sees the KPro, so there must be a way.
same problem
dont buy this joying head unit
its rabish
a. I am a normal user, mainly need to use Bluetooth for phone calls, GPS maps and spotify. I realized that the caller apps does not allow me to put short cuts (quick dials) to my favorite numbers. Is there any way I can do it?
b. It is rather useless to have a headunit if there is no internet connection. I have my HP for WiFi tethering, and also a WiFi dongle. Both doesn't work well because the head-unit can only detect WiFi upon restarting the system. I am not sure why, If I were to shut off my engine, start it up again. The system will not be able to detect WiFi.
c. My head-unit comes with Zlink (apple car-play). Okay, this is funny. I connected my iPhone to the head-unit, but upon connecting to zlink, the Bluetooth connection is cut.
d. I intend to get the ELM327 so that I can see those cool gauges. But can the head unit support both ELM 327 and my iPhone Bluetooth simultaneously.
e. Lastly, do I really need to root it to get it perform? I am not good in all these.
For advice pls.
MCU: 2019-01-23
Can someone give me some advise pls
Hi Tweakmax,
i have the same version as you have. i bought mine from Isudar and is currently installed in my skoda.
A)I'm also not verry happy with the dialer app. First of all, the app is called bluetooth and has a bluetooth icon while it is a dialer. The contacts showed up after 2 hours!! The default launcher does not support custom widget elements such as a shortcut to person. I suggest installing an other launcher.
b) I'm not expierencing this problem.
C) My usb ports don't work. How did you manage to install car play? I have android Auto. By the way. Why do you want to use car play if you have an android head unit?
D) I can confirm that the ELM327 is working. Make sure to unpair the OBD2 dongle from your phone. Then unplug/plug the obd2 adapter.
E) root is not required. You can install other launchers and install APK's.
Hi All,
I'm about to attempt to upgrade my Harley RoadGlide's radio.
REEAALLLY like the fact that it will be a all-in-one solution (GPS/Radio etc)
Here is the plan:
Joying 8.8" 4gb /32gb Android 8 unit
Adaptor for 1 DIN radio ( Harley factory is a off the wall size more like a 1-1/2 DIN )
Module to retain handlebar controls (Works like a steering one)
Marine amp (with the remote power on a manual switch so I can shut the speakers off)
Bluetooth transmitter to send music to headset if needed
Before anybody points out the obvious, yes I know the unit is not marine grade..
This leads me the my first question:
How much heat does the display generate?
I was thinking on taking the bezel off, wrapping the whole back in vinyl up and over the edge of the glass and then putting the bezel back on. This would seal the display part since there is not reset/mic/pwr holes in the glass..
Mating the display with the body will be thru a custom device with seals to prevent water getting in at the connectors.
As for the "main" body it is pretty much protected being in the fairing. I will need a heatsink/fan but I think it will be ok.
Now on the operational question:
Can a bluetooth headset be connected directly to the unit? (For listening to music)
Any tips/advice?
Anybody ever done this?
Thanks !
Ok.. just ordered the 8.8" single din 4gb model.
Was 25% off. Black Friday sale. What can go wrong ??
Good thing about that model is that it is solid glass.. no reset/mic holes.. should make it easier to weatherproof.
The fun will begin when the unit gets here.
Lots of config/testing to do before I shoehorn that puppy in the bike.
I'll post pics if people are interested.
Been testing a couple of GPS apps on my tablet right now ahead of the integration and so far Sygic and Osmand are the best I found. Following a preplanned route is a must( ie to not deviate from the plan) , so if anybody has insight please point me in the right direction ?
Patiently awaiting the arrival of the unit...
The beast is here!!
Just received my unit ?
Got to say it is very well packaged
Will setup and start the testing soon.
Stoked!!!!!
Update/ Questions
Hi All,
Well.. the testing is going well.
So far i am able to get all my music audio to the Bluetooth headset by using a transmitter connected to the RCA output.
I had to use an external USB power for the dongle because the transmitter is "recognized" as a USB keyboard by Joying
I am using the soft button on the unit to turn the amp on/off when I want to use the headset.
I am able to use ZLink as well to connect the phone to the unit.
To have the headset capability for phone, I need to have the headset paired with the headset first.
Then I connect the phone to the unit using ZLink/Android Auto on 1 USB input
I can use the radio's display to control the phone and make calls.
All audio/mic is done by the headset. Yeah!
Only 1 problem.. The Joying keeps on wanting to connect Bluetooth to the phone.. Pops a request every so often..
Any way of turning this off? Only happens when Zlink is active...
If I connect the radio to the phone, it kicks the headset off...
Any way to disable Bluetooth entirely on the unit?
Unit is now rooted and I have installed JET.
Waiting for my handlebar controls converter in order to test "steering" functions.
Cheers!
Junior_1967 said:
Any way to disable Bluetooth entirely on the unit?
Click to expand...
Click to collapse
Can't you do that from the settings? Simply switch off Bluetooth?
Or is that when Joying keeps nagging to switch on Bluetooth? ("wanting to connect" can mean to connect because BT is active, or first wanting to switch it on and then connect)
I tried..
The Zlink app automatically turns bluetooth on I believe.
The bluetooth is off in my Joying settings.
It only happens when the Zlink window is "active"
So when I first connect I press cancel on my phone when the request comes in.
All good until I minimize the windows then re-activate it. Then another request comes in from the Joying unit...
I tried to disable the bluetooth in the app settings and Zlink refuses to open.
There is no "access to bluetooth" in the Zlink app settings..
Really more of an annoyance then anything else as I can just cancel the request...
Would really be nice to have some decent bluetooth settings on the unit to be able to connect any devices or change settings.
Or have some ZLink settings to not start bluetooth on demand since it's already been taken care of by the headset...
Thanks for the suggestion
Cheers,
Problem solved! Android Auto using headset instead of Radio for audio
Hi have solved the problem of Bluetooth wanting to connect all the time.
Solution: First time the popup comes in on the phone when connecting USB to the radio (I used Headunit Reloaded but ZLink should be the same), accept and enter proper password (0000)
Once connected, on the phone Bluetooth settings change Joying Radio to No Phone, No Media.
The next time it will not ask to connect and won't kick out the other Bluetooth (Headset)
Android Auto has to be in developers mode to not care which Bluetooth it is using:
To enable it, open the Android Auto app on your phone and choose About from the left menu. Tap the About Android Auto header text about 10 times and you'll see a prompt to enable developer options. Accept it, then hit the three-dot Menu button and choose Developer settings-> Application mode "Developer"
On to the next challenge!
Cheers!
This sounds interesting. Any pics on the install?
Yes pics please, what are doing are weather proofing the head unit or are you a fair weather rider
Hello guy`s
i have some issues with a 10.25" Android Navigation display i bought.
i also did some chat with the sellers but it seems their english is not very good...
From what i saw the system is the same PX6 System 2GB ram /32GB flash as sold for all other E Series BMW cars, only the additional mount is different.
Unfortunately i can`t attach pictures or extranal links yet, so i`m writing the Android spec here.
MCUVer: 023042bGS-CIC-HW7-190118[B1280_170325]
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20181228.162012
AndroidVer: 8.1.0
AppVer: 2019030801_1280x480_970
Ram: 2G
1st "issue".
when booting the device it does display the Lockscreen, not directly the BMW GUI, i have to swipe to unlock the screen.
any way to change this to go directly into the GUI?
I haven`t found an option yet.
2nd. issue.
Bluetooth does not work like it`s meant to from an Android Device.
there is only a bluetooth menu at the BMW GUI, where i can search for Bluetooth devices and connect them.
the problem is now, it only does find other mobile phones, it does not find the original CIC, not a BT headset, also not a BT mouse or BT keyboard.
when i go to to normal android settings "connected devices" i don`t have an bluetooth option here.
the BMW configuration has set "WenqiangBC6" BT Module enabled.
I want to use an additional Tsumbay Ai01 controller, but i also can not connect this device.
is it possible to reenable the original Bluetooth option there, i think it only has been disabled ?
3rd issue.
It has been delivered with an additional "pseudo" Idrive controller that is directly connected to the Android screen.
the problem is, that the controller will always only work for about 30-60 seconds, then it will not respond anymore, i have to reconnect the controller to get it work for again 30-60 seconds.
does someone also has this controller and had such trouble , or a fix for this ?
4th "issue".
I`m using google maps as i lost the Igo Software because a "factory reset" has been made.
when doing navigation, half of the screen is consumed by grey (bottom) or green (top) surfaces including the Status bar.
is there any chance to change the visuals of google maps to look like Android Auto or at least to make the bars smaller oder disable automatically disable the status bar ?
i have found no option for this, also not for scaling, probably it`s also disabled ?
5th "issue".
the harness does have alot of "CAN" connectors, "CAN A" "CAN B" "CAN C" "CAN 1" "CAN 2".
there did came no description whith the device, does someone have a description of the harness ?
i already updated the cartype.xml and factory.xml to get ID6 back, but that does not help for the other issues.
i hope someone can help me at least with some of the issues
sincerely Chri
Hello
I was able to "solve" the 3rd issue, when the Android navigation is set between Car and original CIC-HU, the original CIC controller does work fine so the pseudo controller isn`t needed anymore
The only thing is that i found a new issue,
7th issue,
the Aux Autoswitch option does go to the wrong menu point.
so when selecting "Music" it does not switch to AUX.
I made a video to show the Start to unlock issue and the Auto AUX issue, maybe this will help
https ://youtu.be/ETWdRfly6PY
you need to remove the space after https
sincerely Chri
Hey Chris, I'm also Dutch and I'm seeing a lot of the same issues..
Doe you know the factory settings code to get in the factory menu?
Thanks!
Hi to all
I have the same unit i get it from AliExpress navifly
I had the same exact issues like chris i did a factory reset and eventually i lost everything i did something wrong and now i have the unit is infinite loading on android and it’s not turning on. I am wondering if someone can help me with this and by the way the factory reset code is 1314
Has anyone solved the bluetooth problem? I just want to load normal android on it to be honest. Their audio bluetooth and phone stuff is taking control somehow. I don't even care for it.
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
GertrudeHarolds said:
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
Click to expand...
Click to collapse
meanwhile it`s a known common thing that Bluetooth is locked on this devices so only smartphones for playing music and do handsfree calling is possible, it is not possible to add other bluetooth devices like OBD dongles, mouse, keyboard ect.
Chri