Eonon Android 5.1.1 bluetooth issues & canbus issues - Android Head-Units

hi guys
new to the forum, hopefully someone will be able to help me
my unit has stock MTCC-KLD6-V2.97 Aug 02 2016 with a RK3188 and 1024x600 screen
Firstly the Bluetooth is not working, quite a lot of apps hang at the part where it try's to turn the BT on, especially one app i really need to work.
I honestly don't know what model of BT chip is installed in the head unit, apparently its BT 4.0 as listed on there website
I have been into the factory menu and changed the BT from WQ_BC6 to WQ_BC6B (as suggested somewhere in this forum) but it has made no change and the BT is still hanging at powering on.
Eonon have told me that the Bluetooth only work with devices that don't require a pin and the radar detector device i need to connect does not require a pin but still it does not work.
Not quite sure if eonon has set the setting wrong and i need to change it or i need to goto a custom rom or I need to pull the unit apart to find out.
Found someone else having trouble getting there ALPconnect app to work aswell on these units, in know ALPconnect wont work on older unit like the 4.4.4 as they only had BT 2.0 and the ALP BT only supports 4.0, but this android unit has 4.0 so it should not be a problem but it is.
sterod said:
The app I use, ALPConnect, does the exact same thing. Fortunately, the hardware on mine includes a hardwired speaker and GPS setup that work standalone. The benefit of the app was to get a nice big visual notification of a trap, as it would come into focus, duck the audio and play an alarm. It would also report the frequency of the radar and the type of laser hitting me. While I can get by without all that, I can't have the music blaring like I usually do, as the little speaker is only so loud and the Joying head unit doesn't have Mute Input wire to duck the audio.
While this is going slightly off topic, you may want to look into the AL Priority, it can interface with your V1 too and you will also gain laser protection. This thing has saved my a** countless times and paid for itself already many times over.
Click to expand...
Click to collapse
Secondly the control menu in the android head unit for accessing the cars buttons via cambus does not work, all steering wheels button seem to communicate back and work, but i cannot set my clock on my mazda 3.
Also have noticed that the radio wont mute when notification occur or when using other apps like google maps, no way to set the different volumes in this stock rom. Have played around with the factory menu volumes but it makes no diffidence.
Is it viable and worth changing to a different ROM, like Malaysk? or should i message eonon?
any help would be much appreciated
thanks
shane

I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr

zandrm said:
I'm having exactly the same issue with a Pumpkin MTCC-KLD6-V2.91. (RK3188/1024x600)
The device I want to pair with appears in Bluetooth settings (with a phone icon?) but connecting to it does nothing. It's just a Bluetooth SPP device, like so many other devices.
Malaysk's ROM (from 7/25) doesn't change anything here.
Any suggestions would be most welcome.
-Zandr
Click to expand...
Click to collapse
Waiting on a reply from Eonon, but initial news is not good.
Some serious BT issues in this model the MTCC
Anyone know if any Malaysk's Rom's avalable for the MTCC-KLD6-V2.91 that have no BT issues

I'm having the same issue, though my unit (MTCC KLD6) does not show any devices at all to pair with, and the car unit does not appear on my phone.
I'm wondering - if I take a usb BT dongle and attach it to the usb cable, would that work?

I think it might be another issue with your BT, it should connect to your phone at very least.
Have you had a look in your factory menu to see if the MCU has the Bluetooth option set?
Password for me was 126
Unfortunately the unit does not support external USB Bluetooth and probably never will, unless the manufacturer MTC/Klyde adds the required drivers to the unit or a Awesome developer by some stroke of luck here adds it to the unit. I doubt to see the feature in this unit
Sent from my iPhone using Tapatalk

Thanks for the reply. Yes, i checked to make sure Bluetooth was enabled in the system settings. I've tried a few of them (change setting, reboot, attempt pairing), i guess the next step is to try them all one by one to rule that out. I've sent an email to the seller to see if they have any ideas.

The vendor told me to connect the Key-1 & Key-2 wires from the canbus to the car, not sure why they'd think that would solve BT issues?

Did this fix the issue? I'm unable to see any Bluetooth devices and other Bluetooth devices don't see it.

Sorry to dig up an old thread
I have the Eonon GA2180a (android 10) - and having similar issues to here
I want to pair a bluetooth remote (read, steering wheel controls) to the head unit, but the bluetooth search just shows blank! I can connect to it using my phone but it appears some things are hidden to connect to with these android units? Looks like the bluetooth 'app' is the only way to connect too, theres nothing in the android settings to access a bluetooth menu or anything.
Did anyone get anywhere with this ?
cheers

Related

Eonon GA6150 BlueTooth question

Hello xda people!
I recently purchased an eonon head unit for my E46 316i from ebay. Specifically a GA6150 (rk3188), which was sold together with a reverse camera.
I am really happy with my order, and pleased with the HU's performance. I managed to connect succesfully my OBD adapter, my bluetooth phone and my wifi hotspot and all is working great.!
Although, I found out something which bothers me. I have purchased a Bluetooth RGB LED controller from ebay, in order to DIY install some LEDs in the interior of the car, and I wanted to control them from my eonon android HU. I can control them through my S7 Edge Android phone via the app called Happy Lighting. I have found out that the manufacturer of these controllers is called Triones. So my problem is, that when I open the app, it asks me to turn on the bluetooth, and allows me to press one of two buttons, allow and deny. If I press allow, a message will appear saying: "Turning on Bluetooth" or something like that, with a spinning wheel, indefinately. It will not stop and it will stay like this all the time, making the app useless, making me press home button to exit. All this happens, even though I know that bluetooth is actually on (I havent yet found an on/off switch for Bluetooth, so I suppose it is always on). If I press deny, then I can enter the app, but I am not able to see any of the bluetooth controllers, is there any way, to make the app think that the bluetooth is on? Or actually turn it off or anything? Would you please help me figure out what should I do? And one last question, is how can I change my screen orientation from landscape to portrait?
I will attach a photo of the details for the version of my Head Unit.
This is the link of the HU I purchased from ebay: http://r.ebay.com/aegMSa
And this is the link to the controller: http://r.ebay.com/aDfflI
While this is the app: https://play.google.com/store/apps/details?id=com.qh.Happylightgoogle&hl=en
Thank you very mych for your time!
Yep had 3 Paypal disputes with Eonon about that issue a year ago on a MTCB unit, I would imagine it would be the same with the MTCD
I think they route all Bluetooth information through the MCU and use non standard configuration of their Bluetooth drivers. So applications that ask to turn the BT on cannot as it is not configured that way.
This is something they were not willing to fix or were unable to.
Sent from my iPhone using Tapatalk
First of all thank you for your reply, i really appreciate it.!
Second, damn it. Damn them! That is really frustrating, i've managed to find a bit more info digging around here and in russian forums. It's sad that i cannot use anything else via bluetooth other than a few OBD adapters and my phone..
I will shortly contact Eonon for my MCU update file and see if anything can be done there. Otherwise, i will see if anything can be fixed via a custom rom and xposed stuff.
P.S.: If there was any other android HU that could support full BT, i would gladly return my Eonon and buy that instead..
DeejayTelis said:
First of all thank you for your reply, i really appreciate it.!
Second, damn it. Damn them! That is really frustrating, i've managed to find a bit more info digging around here and in russian forums. It's sad that i cannot use anything else via bluetooth other than a few OBD adapters and my phone..
I will shortly contact Eonon for my MCU update file and see if anything can be done there. Otherwise, i will see if anything can be fixed via a custom rom and xposed stuff.
P.S.: If there was any other android HU that could support full BT, i would gladly return my Eonon and buy that instead..
Click to expand...
Click to collapse
Joying intel Sofia units is a bit better with the BT, but do some research first.
Good luck with Eonon
From memory it to do with kernel drivers and BT stack and they would not fix
Also be careful with Eonon and returns, additionally PayPal protection does not cover car audio products.
Sent from my iPhone using Tapatalk
shanetrainST said:
Joying intel Sofia units is a bit better with the BT, but do some research first.
Good luck with Eonon
From memory it to do with kernel drivers and BT stack and they would not fix
Also be careful with Eonon and returns, additionally PayPal protection does not cover car audio products.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Digging up an old thread
I would like to connect bluetooth accessories to my eonon new android 10 head unit (2020) - the above looks familiar as i cannot seem to 'find' the devices when searched for using the strange bluetooth 'app'.
Is there anything that can be done? I'd like to add a bluetooth remote (alternatiev to steering wheel controls) - but its not detected by the HU

SWM8802 Bluetooth settings missing

Hi,
I've just purchased one of these head units for my car. I can connect my phone to it via Bluetooth just fine for calls and music, but I want to connect the head unit to my ODB2 bluetooth dongle so that I can create a Torque dashboard for it.
However, when I go to the general settings, Wifi is listed but Bluetooth is not. I've searched and searched but there is no way for me to connect the head unit to a Bluetooth device. I've tried various third party apps that claim they are able to enable Bluetooth and connect to devices, but they all just seem to hang when I try to enable Bluetooth. Tried a system reset too, but that Bluetooth option is still missing from the settings menu.
Please can anyone help?
G
I'm also interested in knowing this. Torque doesn't seem to detect my bluetooth ELM327 at all. I also attempted to connect a USB-based ELM327 module, and Torque seems to detect it, but it doesn't work beyond that, and the headunit gives me a low-power warning light.
Hi did you get anywhere with this I have the same problem can't get Bluetooth options to show
I have exactly the same problem. I'm running a PX5 unit from Witson. Custom built for a Koleos. MCU is not a standard MTC device. I have no bluetooth option available in the settings and the stock bluetooth app does not display any search option whatsoever. It seems that it broadcasts itself for other devices to detect it but you can't search for devices. Seems like they may be handling the bluetooth via the MCU directly and not via android which is strange because they openly claimed that this device was compatible with the OBD II dongle that I purchased. They even shipped it in the same package. Will keep looking and post if I find anything.
I had the same problem with a different Chinese head unit. Solved by buying a WiFi ELM327 dongle which connected fine with the head unit's built-in WiFi.
Update to my earlier post...I managed to get mine working over BT with the WITSON unit. In the end I had to disconnect my phone completely and reboot the unit. Then I found a search option on the dialer page. Searching found the OBD II module and I was able to pair with it. After I was paired with it I was able to add my phone again and both can run in parallel. I have not been able to test much but it seems like this continues to work until the unit goes into a deep sleep and shows the startup logo again. If that happens then I need to go through the learning process again. Meh...
Hi friend, just a question, in the dialer where did you find the search option I cant find it in my android radio??
If you have the swm 8802 you cannot connect to obd2 this requires bluetooth 4 and the 8802only support bluetooth 2
Always Connect ODB First
The ODB readers are a tad picky but they connect using the same menus as any other BT hardware (headset, speaker, etc). First, turn on the car ignition, do not start.
2. Make sure no other BT equipment is connected to the head unit or even on & near by.
Next, place the head unit in searching/Discovery mode and then & only then plug the ELM BT Module into the car ODB II Port. Most cars must be 96 & newer. 95 GM with for the plug but won't work. They're usually ODB 1.5, don't ask, your screwed.
Finally wait for the module to pop up and ask for the code, it's 1234 not 0000.
After your paired, THEN open Torque and let it connect. Don't start the vehicle till the car icon stops flashing.
You should be good to go from then on. If you ever have problems after that. Make sure the app is totally closed, force stop and then follow this procedure again.
---------- Post added at 07:55 AM ---------- Previous post was at 07:30 AM ----------
vincentstans said:
If you have the swm 8802 you cannot connect to obd2 this requires bluetooth 4 and the 8802only support bluetooth 2
Click to expand...
Click to collapse
Mine connected no problem. Did it just like I do on my phone. I just got mine too though. Could be an update maybe
the original question wasn't answered and I have that problem too. I don't have a Bluetooth discovery/search option anywhere. the small bluetooth-like icon on the main panel just changes the color of the leds.
so can't connect new phone. although Bluetooth seems to be working, since an older phone, already paired, is still working.
Following this as my head unit is same. Theres no blietooth menu/option but it connects to a phone.
Ive tried a third party bluetooth manager but all that says is bluetooth disabled by admin??
A fix
That happened to me trying to add and ODB2 bt dongle. I had to use the app for bluetooth linking provided by the head unit. When I purchased the unit, I changed the bluetooth discovery and pairing code to 0000. Well, changing it to 1234 allowed me to add the ODB dongle.
I saw it on a YouTube video, and well, it worked for me. (And no, no native bluetooth option, came disabled for my unit as you said)
Hope it works for you too.
same problem with me
Hi sir did you found solution for this problem. I also have this problem with my native bluetooth. when i turn open system setting bluetooth missing. i try to open using shotcut and found shotcut to turn on bluetooth but when i turn on. it do nothing.
I can play music, make call using bluetooth app provide from head unit. Problem is i cant use it with OBD2 . same with your statement this bluetooth only stream signal to other. this Head unit cannot find other bluetooth.
Kindly please assist me. did this head unit still have hope to turn on native bluetooth or not. I still search many post regarding this issue. But issue bluetooth like this not many discussion.
Hello there,
My problem is some how different. My hu use the bluethoot to find the obd2 adapter but there is no dedicated pair button. I can pair my phone for calls and music but connecting from phone to hu.
My unit is a 8227l from seicane.
Has anyone any solution? Thank you!
blongro said:
Hello there,
My problem is some how different. My hu use the bluethoot to find the obd2 adapter but there is no dedicated pair button. I can pair my phone for calls and music but connecting from phone to hu.
My unit is a 8227l from seicane.
Has anyone any solution? Thank you!
Click to expand...
Click to collapse
Change the pair code in the bluetooth custom app provided, to 1234 and try again.
I had this happen and I think I figured it out.... in factory settings there's an option to choose bluetooth connect automatically or with pin. I checked with pin and was able to pair. I think the options are reversed in the settings
I have the same problem i can't connect to the android 7.1 car head unit any more , the bluetooth setting is missing , the wifi settings appear but bluetooth doesn't appear any more
Anyone can help me to fix this issue please ?
Karemz said:
I have the same problem i can't connect to the android 7.1 car head unit any more , the bluetooth setting is missing , the wifi settings appear but bluetooth doesn't appear any more
Anyone can help me to fix this issue please ?
Click to expand...
Click to collapse
I bought a bluetooth usb adapter and I can't select it on the system. I think this would be the way out, but we need to replace the driver inside android. Does anyone have any ideas?
venomrocha said:
I bought a bluetooth usb adapter and I can't select it on the system. I think this would be the way out, but we need to replace the driver inside android. Does anyone have any ideas?
Click to expand...
Click to collapse
I have a Teyes Spro with the same Bluetooth issues as most on this post describe. Did you find an answer to your usb adaptor to solve the Bluetooth problem? I was told to add a line to the config.txt file but cannot locate where to access that to add it.
Bought a Teyes Spro headunit and I have a problem with Bluetooth discovery on my obd II and tpms modules. Does anyone know what is in the "Developer" tab? It is password protected not accessible. The 168 factory access code does not work for it. Anyone know the password?

Looking for infos on Joying Head Unit for my crazy project :)

Hi All,
I'm about to attempt to upgrade my Harley RoadGlide's radio.
REEAALLLY like the fact that it will be a all-in-one solution (GPS/Radio etc)
Here is the plan:
Joying 8.8" 4gb /32gb Android 8 unit
Adaptor for 1 DIN radio ( Harley factory is a off the wall size more like a 1-1/2 DIN )
Module to retain handlebar controls (Works like a steering one)
Marine amp (with the remote power on a manual switch so I can shut the speakers off)
Bluetooth transmitter to send music to headset if needed
Before anybody points out the obvious, yes I know the unit is not marine grade..
This leads me the my first question:
How much heat does the display generate?
I was thinking on taking the bezel off, wrapping the whole back in vinyl up and over the edge of the glass and then putting the bezel back on. This would seal the display part since there is not reset/mic/pwr holes in the glass..
Mating the display with the body will be thru a custom device with seals to prevent water getting in at the connectors.
As for the "main" body it is pretty much protected being in the fairing. I will need a heatsink/fan but I think it will be ok.
Now on the operational question:
Can a bluetooth headset be connected directly to the unit? (For listening to music)
Any tips/advice?
Anybody ever done this?
Thanks !
Ok.. just ordered the 8.8" single din 4gb model.
Was 25% off. Black Friday sale. What can go wrong ??
Good thing about that model is that it is solid glass.. no reset/mic holes.. should make it easier to weatherproof.
The fun will begin when the unit gets here.
Lots of config/testing to do before I shoehorn that puppy in the bike.
I'll post pics if people are interested.
Been testing a couple of GPS apps on my tablet right now ahead of the integration and so far Sygic and Osmand are the best I found. Following a preplanned route is a must( ie to not deviate from the plan) , so if anybody has insight please point me in the right direction ?
Patiently awaiting the arrival of the unit...
The beast is here!!
Just received my unit ?
Got to say it is very well packaged
Will setup and start the testing soon.
Stoked!!!!!
Update/ Questions
Hi All,
Well.. the testing is going well.
So far i am able to get all my music audio to the Bluetooth headset by using a transmitter connected to the RCA output.
I had to use an external USB power for the dongle because the transmitter is "recognized" as a USB keyboard by Joying
I am using the soft button on the unit to turn the amp on/off when I want to use the headset.
I am able to use ZLink as well to connect the phone to the unit.
To have the headset capability for phone, I need to have the headset paired with the headset first.
Then I connect the phone to the unit using ZLink/Android Auto on 1 USB input
I can use the radio's display to control the phone and make calls.
All audio/mic is done by the headset. Yeah!
Only 1 problem.. The Joying keeps on wanting to connect Bluetooth to the phone.. Pops a request every so often..
Any way of turning this off? Only happens when Zlink is active...
If I connect the radio to the phone, it kicks the headset off...
Any way to disable Bluetooth entirely on the unit?
Unit is now rooted and I have installed JET.
Waiting for my handlebar controls converter in order to test "steering" functions.
Cheers!
Junior_1967 said:
Any way to disable Bluetooth entirely on the unit?
Click to expand...
Click to collapse
Can't you do that from the settings? Simply switch off Bluetooth?
Or is that when Joying keeps nagging to switch on Bluetooth? ("wanting to connect" can mean to connect because BT is active, or first wanting to switch it on and then connect)
I tried..
The Zlink app automatically turns bluetooth on I believe.
The bluetooth is off in my Joying settings.
It only happens when the Zlink window is "active"
So when I first connect I press cancel on my phone when the request comes in.
All good until I minimize the windows then re-activate it. Then another request comes in from the Joying unit...
I tried to disable the bluetooth in the app settings and Zlink refuses to open.
There is no "access to bluetooth" in the Zlink app settings..
Really more of an annoyance then anything else as I can just cancel the request...
Would really be nice to have some decent bluetooth settings on the unit to be able to connect any devices or change settings.
Or have some ZLink settings to not start bluetooth on demand since it's already been taken care of by the headset...
Thanks for the suggestion
Cheers,
Problem solved! Android Auto using headset instead of Radio for audio
Hi have solved the problem of Bluetooth wanting to connect all the time.
Solution: First time the popup comes in on the phone when connecting USB to the radio (I used Headunit Reloaded but ZLink should be the same), accept and enter proper password (0000)
Once connected, on the phone Bluetooth settings change Joying Radio to No Phone, No Media.
The next time it will not ask to connect and won't kick out the other Bluetooth (Headset)
Android Auto has to be in developers mode to not care which Bluetooth it is using:
To enable it, open the Android Auto app on your phone and choose About from the left menu. Tap the About Android Auto header text about 10 times and you'll see a prompt to enable developer options. Accept it, then hit the three-dot Menu button and choose Developer settings-> Application mode "Developer"
On to the next challenge!
Cheers!
This sounds interesting. Any pics on the install?
Yes pics please, what are doing are weather proofing the head unit or are you a fair weather rider

BMW E8x E9x CIC PX6 Android 10,25" trouble with bluetooth, idrive, display ect.

Hello guy`s
i have some issues with a 10.25" Android Navigation display i bought.
i also did some chat with the sellers but it seems their english is not very good...
From what i saw the system is the same PX6 System 2GB ram /32GB flash as sold for all other E Series BMW cars, only the additional mount is different.
Unfortunately i can`t attach pictures or extranal links yet, so i`m writing the Android spec here.
MCUVer: 023042bGS-CIC-HW7-190118[B1280_170325]
FrameworkVer: 8.1.0 OPM5.171019.019 eng.zxw.20181228.162012
AndroidVer: 8.1.0
AppVer: 2019030801_1280x480_970
Ram: 2G
1st "issue".
when booting the device it does display the Lockscreen, not directly the BMW GUI, i have to swipe to unlock the screen.
any way to change this to go directly into the GUI?
I haven`t found an option yet.
2nd. issue.
Bluetooth does not work like it`s meant to from an Android Device.
there is only a bluetooth menu at the BMW GUI, where i can search for Bluetooth devices and connect them.
the problem is now, it only does find other mobile phones, it does not find the original CIC, not a BT headset, also not a BT mouse or BT keyboard.
when i go to to normal android settings "connected devices" i don`t have an bluetooth option here.
the BMW configuration has set "WenqiangBC6" BT Module enabled.
I want to use an additional Tsumbay Ai01 controller, but i also can not connect this device.
is it possible to reenable the original Bluetooth option there, i think it only has been disabled ?
3rd issue.
It has been delivered with an additional "pseudo" Idrive controller that is directly connected to the Android screen.
the problem is, that the controller will always only work for about 30-60 seconds, then it will not respond anymore, i have to reconnect the controller to get it work for again 30-60 seconds.
does someone also has this controller and had such trouble , or a fix for this ?
4th "issue".
I`m using google maps as i lost the Igo Software because a "factory reset" has been made.
when doing navigation, half of the screen is consumed by grey (bottom) or green (top) surfaces including the Status bar.
is there any chance to change the visuals of google maps to look like Android Auto or at least to make the bars smaller oder disable automatically disable the status bar ?
i have found no option for this, also not for scaling, probably it`s also disabled ?
5th "issue".
the harness does have alot of "CAN" connectors, "CAN A" "CAN B" "CAN C" "CAN 1" "CAN 2".
there did came no description whith the device, does someone have a description of the harness ?
i already updated the cartype.xml and factory.xml to get ID6 back, but that does not help for the other issues.
i hope someone can help me at least with some of the issues
sincerely Chri
Hello
I was able to "solve" the 3rd issue, when the Android navigation is set between Car and original CIC-HU, the original CIC controller does work fine so the pseudo controller isn`t needed anymore
The only thing is that i found a new issue,
7th issue,
the Aux Autoswitch option does go to the wrong menu point.
so when selecting "Music" it does not switch to AUX.
I made a video to show the Start to unlock issue and the Auto AUX issue, maybe this will help
https ://youtu.be/ETWdRfly6PY
you need to remove the space after https
sincerely Chri
Hey Chris, I'm also Dutch and I'm seeing a lot of the same issues..
Doe you know the factory settings code to get in the factory menu?
Thanks!
Hi to all
I have the same unit i get it from AliExpress navifly
I had the same exact issues like chris i did a factory reset and eventually i lost everything i did something wrong and now i have the unit is infinite loading on android and it’s not turning on. I am wondering if someone can help me with this and by the way the factory reset code is 1314
Has anyone solved the bluetooth problem? I just want to load normal android on it to be honest. Their audio bluetooth and phone stuff is taking control somehow. I don't even care for it.
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
GertrudeHarolds said:
same problem with bootooth here. Not able to connect bluetooth device from other apps (OBD or Flitsmeister)
Click to expand...
Click to collapse
meanwhile it`s a known common thing that Bluetooth is locked on this devices so only smartphones for playing music and do handsfree calling is possible, it is not possible to add other bluetooth devices like OBD dongles, mouse, keyboard ect.
Chri

Custom or modified rom to enable full bluetooth use?

Hey guys so I have an Alfa 159 and bought one of these head units:
Edit i cannot post a link however its the generic A-media Auto alfa 159 head unit which can be found on google
now I was speaking with a friend of mine who explained that the roms are "cut back" and removes some features and full blurtooth control/ support is one of them
I am reasonably ok with computers but never ventrued into any sort of custom android stuff and the extend of my knowledge is " i know you can get custom roms" i hdon't know how to do them or use them etc.
I have some bluetooth modules i can control from my phone in the car (lighting and actuators) but would love to be able to do it from the head unit
Would it be possible to get a custom rom for this head unit and if so any guides at all?
I would like to point i did have a search but honestly i am not totally sure what I am searching for and searching sepcifically for this head unit didnt help.
Thank yoiu very much
It's not so much that the ROM removed bluetooth features as much as it is how the bluetooth module is integrated to the HU. There's 2 system boards that make up the HU. The SoM has the Android system and is basically a tablet motherboard with only a display, audio and USB connection. The MCU provides a USB hub, audio preamp and power amp, connectivity to the car and the bluetooth module. The bluetooth module is treated as a headset controlled through a serial connection with AT commands and this is where the problem lies with using bluetooth with any apps other than the built in ones. It works for ODB dongles so it is possible but if the functionality you're looking for is not already implemented I doubt someone else would be able to add it to the MCU ROM. All I can say is try and see if it works.
Maybe you can try to connect a USB bluetooth dongle the issue here would be Android drivers.
nic2k said:
It's not so much that the ROM removed bluetooth features as much as it is how the bluetooth module is integrated to the HU. There's 2 system boards that make up the HU. The SoM has the Android system and is basically a tablet motherboard with only a display, audio and USB connection. The MCU provides a USB hub, audio preamp and power amp, connectivity to the car and the bluetooth module. The bluetooth module is treated as a headset controlled through a serial connection with AT commands and this is where the problem lies with using bluetooth with any apps other than the built in ones. It works for ODB dongles so it is possible but if the functionality you're looking for is not already implemented I doubt someone else would be able to add it to the MCU ROM. All I can say is try and see if it works.
Maybe you can try to connect a USB bluetooth dongle the issue here would be Android drivers.
Click to expand...
Click to collapse
Thank you, sorry for late reply.
A friend of mine figured out with his that it was "nuked" in the software allegadly. the bluetooth module is a generic module but unfortunatly I am not massivly clued up on reflashing roms or even where to start especially on a head unit which is a shame.
My friend unfortunatly has since moved country so I can no longer ask him to take a look
I don't suppose anyone else might have an idea to this?
this comes up often apparently nobody give f*ckall to address this issue.
^ Thats a real shame
Craigrobbo said:
^ Thats a real shame
Click to expand...
Click to collapse
i know, my radio is great, does everything great. I just want to connect bt to my ham radio and use this as the head unit. and I was thinking about using those bluetooth valve stems so i can see the air pressures in my tires, looks like those wont work either.
ChiefWilNel said:
this comes up often apparently nobody give f*ckall to address this issue.
Click to expand...
Click to collapse
Have you considered that these units work for the intended use and if it doesn't work for some obscure use case the desire to solve a problem for single users is limited. To expect others work on an obscure problem for you seems a bit entitled.
Have you considered taking the lead on this issue.
Bumping to see if ANYONE has came up with a solution, maybe an external dongle?

Categories

Resources