Anybody knows how to use the AUX port to play music through the head unit?
Hi, I have the same doubt here. I bought a pure Android unit (still trying to find out which make and model is, as it's unbranded, with RK3188A chip, but not matching any MCU listed on the HuiFei wiki page), and I see that I can only use the dual zone for DVD while navigating (IGO) on the head unit. I mean, I have no PIP functionality (not a big issue), but the dual is not working as expected. I can only send video to rear monitors if it's played from the DVD. No USB, SD, BT, etc music or video files seem to be allowed to be sent through the AUX out port. And I'm only allowed to use navigation app while DVD is played on rear monitors... No radio, no USB, SD, etc video or audio files.
My previous unit is a WinCE supporting really well all this functions, but unfortunately due to a battery power loss, it only starts in recovery mode (expecting to load some firmware from SD card), and I cannot find any FW valid for it. And this pure Android is unable to do it, so I'm investigating to come up with a solution (it's the main reason I bought the pure Android unit).
Anyone knows any option? I think this could be done via software, but maybe I'm wrong.
Thanks in advance, it's really appreciated.
joyduck said:
Anybody knows how to use the AUX port to play music through the head unit?
Click to expand...
Click to collapse
you'll need a 3.5mm/2.5mm male to 2 RCA cable,connect this cable to your MP3 or someting and the AUX IN L and AUX IN R cables ,open the AV IN app on the head unit,then you can listen to the music through your head unit
cherry714401 said:
you'll need a 3.5mm/2.5mm male to 2 RCA cable,connect this cable to your MP3 or someting and the AUX IN L and AUX IN R cables ,open the AV IN app on the head unit,then you can listen to the music through your head unit
Click to expand...
Click to collapse
So, you cannot play music from a friend's phone and use tomtom (or any app) in the meantime?
There is any possibility to have AUX-IN audio and any navigation app in the meantime?
Thank you,
gabycm said:
Hi, I have the same doubt here. I bought a pure Android unit (still trying to find out which make and model is, as it's unbranded, with RK3188A chip, but not matching any MCU listed on the HuiFei wiki page), and I see that I can only use the dual zone for DVD while navigating (IGO) on the head unit. I mean, I have no PIP functionality (not a big issue), but the dual is not working as expected. I can only send video to rear monitors if it's played from the DVD. No USB, SD, BT, etc music or video files seem to be allowed to be sent through the AUX out port. And I'm only allowed to use navigation app while DVD is played on rear monitors... No radio, no USB, SD, etc video or audio files.
My previous unit is a WinCE supporting really well all this functions, but unfortunately due to a battery power loss, it only starts in recovery mode (expecting to load some firmware from SD card), and I cannot find any FW valid for it. And this pure Android is unable to do it, so I'm investigating to come up with a solution (it's the main reason I bought the pure Android unit).
Anyone knows any option? I think this could be done via software, but maybe I'm wrong.
Thanks in advance, it's really appreciated.
Click to expand...
Click to collapse
You just bought the wrong device.
Nearly all units with DVD support only video/audio from this drive, nothing else.
All units without integrated DVD can play anything from anywhere, even from any USB-DVD.
From my understanding this cannot be changed...
May be possible by deactivating the DVD by pulling out the connection to the main board.... I don´t know, needs to be tested.
---------- Post added at 07:09 PM ---------- Previous post was at 07:05 PM ----------
mesgas said:
So, you cannot play music from a friend's phone and use tomtom (or any app) in the meantime?
There is any possibility to have AUX-IN audio and any navigation app in the meantime?
Thank you,
Click to expand...
Click to collapse
Where do you read that out of his posting? You always can send the AUX player to the background and can use navigation.
By the way... for what reason did you activate the donate button? Did you create any helpful software to ask for donation?
MY unit has AUX in but no AUX in app. Does anyone have the APK or one they recommend? MCTB running android 10.
How do I delete this I accidentally posted in wrong thread.
CaliBurr said:
MY unit has AUX in but no AUX in app. Does anyone have the APK or one they recommend? MCTB running android 10.
Click to expand...
Click to collapse
Not an MTCx device...
marchnz said:
Not an MTCx device...
Click to expand...
Click to collapse
Ah, someone said it was. What is it?
I don't know if this applies to all firmware, but on some firmware, you either see the AUX or the Front Camera app icon. In the settings, when the front camera is activated, the AUX program icon changes to a front camera. If you deactivate the front camera then the AUX icon appears and I believe the sound source input is also made active in addition to the camera. On mine, the option is under Factory Settings and is named "Front View" on can be toggled on or off.
I have a TEyes SPro 4/64 which is an s9853i FYT unit. You should check the connection diagram for your head unit to see which pins/connectors are for AUX video and audio.
mastrv said:
I don't know if this applies to all firmware, but on some firmware, you either see the AUX or the Front Camera app icon. In the settings, when the front camera is activated, the AUX program icon changes to a front camera. If you deactivate the front camera then the AUX icon appears and I believe the sound source input is also made active in addition to the camera. On mine, the option is under Factory Settings and is named "Front View" on can be toggled on or off.
I have a TEyes SPro 4/64 which is an s9853i FYT unit. You should check the connection diagram for your head unit to see which pins/connectors are for AUX video and audio.
Click to expand...
Click to collapse
Interesting so I can't use my dash cam and AUX?
Not sure. Try it and see what happens. Maybe your unit is different.
If both your dash cam and AUX use the same inputs, then I would guess that it's not possible.
Best to try and maybe follow-up with your vendor/seller/manufacturer.
I have a similar problem. I m trying to install an reverse camera. I have connected the orange "reversing" wire but when I am in reverse I get a "no signal error". What's the difference between video in and cam in connectors. Do you know what the pin out of this connector is because the rca female cables are not installed and I m trying all possible combinations in order to connect the video in and grnd cables from the male rca. Thanks
Related
Hi just received an "EONON" android head unit that I bought on ebay.
It is the KLD RK3188 Android 4.4.4 version with no DVD player.
The unit is great, except for one major issue. The microphone is useless, both the internal and external mic produce very loud continuous buzzing both in phone calls and in Android apps.
I saw some others had some issues similar to this on other units, but I have not seen anyone mention this on this specific one.
Does anyone know of a fix for this?
I have tried a usb mic, but I can't get the device to use it as default.
Any advice would be appreciated!!
Its not an Eonon, they are just re-sellers, its a Klyde unit, they are all the same basic unit apart from screen size and front design and whether they are dual or quad core, read the main HuiFei thread, specifically the first page for a solution to the problem (You DONT want to use a USB mic as it probably contains a sound card so ALL Android sound will be diverted to it).
Solved
typos1 said:
Its not an Eonon, they are just re-sellers, its a Klyde unit, they are all the same basic unit apart from screen size and front design and whether they are dual or quad core, read the main HuiFei thread, specifically the first page for a solution to the problem (You DONT want to use a USB mic as it probably contains a sound card so ALL Android sound will be diverted to it).
Click to expand...
Click to collapse
Thanks for the tip.
I actually was able to fix it by following that solution. I removed capacitor C32 and connected an external mic directly to the bluetooth module.
Phone calls are great now, Android is still using the internal mic with the crappy audio, but it seems like it would be difficult to fix and it works at least well enough for some basic voice commands which is all I need.
Hi
Burnaby BC, is your unit KLD ?
if so can you explain what you did ?
I understand that you have to remove capacitor C32 but what I don't understand is how did you do the second part(connect external mic directly to the BT module.)
thanks
rooot_999 said:
Hi
Burnaby BC, is your unit KLD ?
if so can you explain what you did ?
I understand that you have to remove capacitor C32 but what I don't understand is how did you do the second part(connect external mic directly to the BT module.)
thanks
Click to expand...
Click to collapse
Yes my unit is a Klyde (KLD) unit.
Look at C32, it should be next to the bluetooth module (unfortunately I don't have a picture).
Follow the trace that connects C32 to the input on the bluetooth module.
Once you remove C32, connect the microphone positive lead (+) to that input.
Then connect the microphone ground/negative (-) lead to ground or a case screw.
This will fix the bluetooth phone call audio.
smcw said:
Yes my unit is a Klyde (KLD) unit.
Look at C32, it should be next to the bluetooth module (unfortunately I don't have a picture).
Follow the trace that connects C32 to the input on the bluetooth module.
Once you remove C32, connect the microphone positive lead (+) to that input.
Then connect the microphone ground/negative (-) lead to ground or a case screw.
This will fix the bluetooth phone call audio.
Click to expand...
Click to collapse
thanks a lot man
Any help please!!!
I recently installed eonon headunit. I was able to mirror my s7 edge onto the head unit. I updated my s7 to android 7 and now i cant mirror the two unit anymore.
I can use bluetooth to stream audio on phone to headunit
I have installed a chinese Pumpkin Android head unit in my Toyota Previa van and after adding an external 3G router and connecting it via an ethernet adapter and an car roof antenna I am now extremely pleased. I get close to perfect streaming video on the road!
I would love to supplement the small Pumpkin display with a roof mounted flip down monitor so the back passengers can watch youtube on a decent size screen. There are many of those on the market, so that should be easy.
However, it turns out that the video output connector of the Pumpkin head unit is only connected to signal of the DVD player! And I stubbornly refuse to go back to juggling with silver disks.
I assume these Android head units coming from China are all very similar. Has anyone ever tried isolating the signal of the head unit's LCD screen and connecting it to an external monitor? If so, please let me know so I can install a monitor that just mirrors the head unit's display.
Regards,
Tinkerspy
I would also love to do this. My factory system output to the headrest screens for back passengers. Since I installed the Android head unit, everything works fine but only outputs to the rear screens if a DVD is inserted - I would love to just be able to duplicate whatever is on the screen so I can play YouTube, Netflix etc. on the rear screens.
Fuze2009 said:
I would also love to do this. My factory system output to the headrest screens for back passengers. Since I installed the Android head unit, everything works fine but only outputs to the rear screens if a DVD is inserted - I would love to just be able to duplicate whatever is on the screen so I can play YouTube, Netflix etc. on the rear screens.
Click to expand...
Click to collapse
Hi, Did you solve the problem?
thanks
I just haven't had time to look at it - been too busy. However, I didn't mention above that my yellow video RCA cables on the back of the unit were mis-labeled and my backup camera ended-up working with a different plug - so I will hopefully get some time to try out what the other RCA video plugs actually do next week when I free up a bit.
Any news about it?
Fuze2009 said:
I just haven't had time to look at it - been too busy. However, I didn't mention above that my yellow video RCA cables on the back of the unit were mis-labeled and my backup camera ended-up working with a different plug - so I will hopefully get some time to try out what the other RCA video plugs actually do next week when I free up a bit.
Click to expand...
Click to collapse
I'd be really interested to hear if it was possible to output video from a source other than DVD to external monitors [emoji106]
Sent from my HTC One M9 using Tapatalk
I've found that some of these Android head-units output ALL video to external monitors and some only output DVD and/or Aux-In to external monitors.
For example, I purchased two GM-specific units - an Eonon GA9180A (MTCE-WWW) and a Hizpo (MTCE-XRC). The Eonon sends ALL video to the video-out jacks (OS launcher, DVD, navi, all apps, etc), but the Hizpo only sends DVD and Aux-in to the video-out jacks.
I know this doesn't help you since you already have the unit (unless you can still exchange/return it), but it may help others that are still in the "research" phase...
dragging this up again..
Does anyone know/think it's possible to pipe video to external monitors from sources other than DVD on these units???
Cheers
up
black&white video out from android HU Help!
Hello, I'm interested in buying an android hu 7" inch. I want to be able to output from the board video and audio with an RCA cable (yellow video, red/white audio) to an external display. I want to output video and audio on an mmi2g audi display...
forum.xda-developers.com
Hi guys..
Well first of all how I wish I'd checked these forums first before buying as I wouldn't have, second I wish I'd at least bought from the UK as I'd get some support. But hey ho I didn't and I'm stuck with it as returning to china seems to risky after the message suggested returning at a value of $70 so they don't get taxed and also making sure its sent by EMs so it doesn't get lost in transit like many units do at customs!!
So I bought what seemed to be an all singing all dancing unit from seicane store on ali express, for my seat ibiza mk5. According to the system info via root check app it's a px3, 7.1.2 android, rock chip, rk30sdk.
Amongst many other problems my main one is the Bluetooth audio quality over A2DP is horrendous, and it's not an amp problem as over aux or USB it's perfect. I've been looking at airplay using air bubble app and personal hotspot but it's too long to load and unstable I only drive 15 min to work so just want fast music to my ears! I've considered getting a Bluetooth transmitter and sticking it in the aux input but not ideal.
Anyone got suggestions as to what the issue may be and if it can be resolved?
Thanks in advance hope I can get this stable one day!
mine is also horrendous, and I also have a very short drive. Connecting a hotspot and launching app and getting a song, takes just too long for me. I'm basically already at my destination by the time I get it up. My workaround was to do what you said, and get a bluetooth transmitter and sticking to the aux, because aux sounds fine, but just bluetooth over a2dp sounds so bad, and has this distorted high end sound. This solution worked for me for awhile, but the only downside is you don't get song information on the head unit to display, which is a tad annoying for me.
I've contacted my radios reseller, and they're just ridiculously helpless, all they do is keep sending me a "software" update to fix it, but it does nothing. I've been searching for over a year for a solution, but have found nothing to fix it, other than what I just said. Problem was still there even when I used custom roms. SO I don't really think its a software issue, maybe some kind of hardware I can replace or modify, but I just really have no clue.
davidgotmilk said:
mine is also horrendous, and I also have a very short drive. Connecting a hotspot and launching app and getting a song, takes just too long for me. I'm basically already at my destination by the time I get it up. My workaround was to do what you said, and get a bluetooth transmitter and sticking to the aux, because aux sounds fine, but just bluetooth over a2dp sounds so bad, and has this distorted high end sound. This solution worked for me for awhile, but the only downside is you don't get song information on the head unit to display, which is a tad annoying for me.
I've contacted my radios reseller, and they're just ridiculously helpless, all they do is keep sending me a "software" update to fix it, but it does nothing. I've been searching for over a year for a solution, but have found nothing to fix it, other than what I just said. Problem was still there even when I used custom roms. SO I don't really think its a software issue, maybe some kind of hardware I can replace or modify, but I just really have no clue.
Click to expand...
Click to collapse
Yeh I've ruled out airplay as an option,
you've got me interested though as you're in a similar boat as me so hopefully can help, do you have the exact same unit for an ibiza or?
And yes thats exactly whats annoying me not getting track info, may as well just use the original head unit if i get a bluetooth transmitter!! which transmitter did you get? i've got a really cheap basic one years old and its got a high pitched whining noise in between song skips so its there just muffled out by songs playing, I'm wondering if thats probably just a cheap receiver I've got..
I'll try get somewhere with the hardware see about a new bluetooth module but no idea on the interface would be total guess work and risky at that, not even sure how to safely root this one.
Other issues i'm having which may be common and you may know? I got a dash cam which cam with a yellow RCA, an Acc+ wire, a ground wire and a 12V wire.. i don't understand why its got an Acc+ and a 12V, i thought similar things both transmit power just one off the ignition being on only? theres no 12v out wire on the head unit except 'cam pow' which I've tried to no avail. I plan on recording direct to the SD card on the camera.
Subwoofer out, does this work on our units? i bought it because i plan adding a 4 channel amp for F/R speaks and a sub amp for a single sub.. but does the rca not work / no amplifier control over it?!
Cheers hope to get somewhere with this as i feel a bit down that its not all singing all dancing like i expected lol.
i have a Seicane with Android 6.0 already, which I dont really have any problems with, but it is not PX3
however, I do have a Seicane with Android 7.1 on the way that does have a PX3. I'll report back when i get it to see if I have any issues
CadillacMike said:
i have a Seicane with Android 6.0 already, which I dont really have any problems with, but it is not PX3
however, I do have a Seicane with Android 7.1 on the way that does have a PX3. I'll report back when i get it to see if I have any issues
Click to expand...
Click to collapse
your bluetooth quality is as good as aux? i wonder if its a software bug..
joshh1512 said:
your bluetooth quality is as good as aux? i wonder if its a software bug..
Click to expand...
Click to collapse
Well the 6.0 version is totally different hardware
it is a known issue that no one seems to have a fix for. Im having this same issues with my PX5 Dasaita unit and had this issue on a previous Xtrons unit aswell. I believe it is a problem with the bluetooth drives not supporting the higher bitpools of recent bluetooth updates hence the bad quality. Ive even tried installing a USB bluetooth dongle but could not get the unit to recognize it.
roly01 said:
it is a known issue that no one seems to have a fix for. Im having this same issues with my PX5 Dasaita unit and had this issue on a previous Xtrons unit aswell. I believe it is a problem with the bluetooth drives not supporting the higher bitpools of recent bluetooth updates hence the bad quality. Ive even tried installing a USB bluetooth dongle but could not get the unit to recognize it.
Click to expand...
Click to collapse
Well I also have a Dasaita PX5 and I definitely didn't have a problem on that one. I would listen to Bluetooth audio on it pretty regularly.
Quick from Hot Audio did email me and ask about it, saying they had heard complaints, and sent me a new harness, but I haven't needed it
CadillacMike said:
Well I also have a Dasaita PX5 and I definitely didn't have a problem on that one. I would listen to Bluetooth audio on it pretty regularly.
Quick from Hot Audio did email me and ask about it, saying they had heard complaints, and sent me a new harness, but I haven't needed it
Click to expand...
Click to collapse
What email did you contact for hot audio? I have reported the issue but they have made no mentions of a different harness. Thanks
roly01 said:
What email did you contact for hot audio? I have reported the issue but they have made no mentions of a different harness. Thanks
Click to expand...
Click to collapse
Just the default contact
[email protected]
Well i've gone an ordered a car play dongle, so hopefully that will be a solution for good radio and a more functional nav at the same time.
Any tips for the dash cam guys? i ordered the 3 cable power one rather than a usb to keep the slots free.. not sure where i should hook them up to. (12V yellow, Acc+ red, black Grnd), i've only got an acc+ on the back of the harness and ground i made an earth wire to the car. Left the 12v off and it doesn't turn on. but my unit doesn't have a 12v, only acc+ or cam pow.
Got a pic or link to the camera you got?
So i have this camera..
https://www.aliexpress.com/item/140...32812106756.html?spm=a2g0s.9042311.0.0.MXwOS4
and this unit..
https://www.aliexpress.com/item/Aft...32827061575.html?spm=a2g0s.9042311.0.0.MXwOS4
The seller said to connect acc+ to acc+ on the unit, 12v to the cars 12v and grnd to the cars ground. I made an earth for the ground just to a screw towards the rear inside of the dash, but not sure where i'll safely take 12v from? especially with the car having a can bus if i splice any wires that may cause an error? Surely these units put out a 12v signal somewhere?
heres the wiring diagrams... https://ae01.alicdn.com/kf/HTB1z7DmnMn.PuJjSZFk763_lpXaZ.png
Also another Q regarding using an external amplifier for speakers and a sub.. is there an issue with the actual volume sent to the amps and can this be resolved? depending what input i give the head unit the volume differs, aux a lot quieter than usb stick or bluetooth.. but even both of them at volume 30 neither are really very loud where you here the speakers distorting, with a standard radio or branded head unit towards top end the speakers would distort so i can set a 'safe' max limit, my concern is the android head unit will limit the amp? and i've seen no info on rooting these units for viper4audio if that would help.
Thanks
Edit: how would i check if the 'cam-pow' wire is putting out 12v with a multimeter? just hold one probe to the wire and touch a ground point with the other?
BT & USB Support on PX5
Guys,
Sorry to tell you, the ROMS are very stripped down and as a result, the only support will be for the listing of BT modules that are on the main board and only for the ones list in the setup. You will not be able to add an external usb BT module to the head unit, it will not reconize them, and therefor will not work. Same with other USB devices. All support has been stripped out of the firmware. Some of these company's are getting slick enough to modify the firmware even more to only support devices that they sell, locking you into buying there junk. Good Luck! I had a BT problem with a Seicane Head Unit, and tried every possible, BT usb module only to find out what they do. Anyone want to purchase BT usb modules cheap!!!!!!
Seicane PX5:
CPU: 8 core 64-bit CPU Coretex-A53 @ 1.5G
Memory: 3891
Kernel Version: 4.4.93+ [email protected] #263 Wed May 9 09:36:56 CST 2018
Build Number: px5-userdebug 8.0.0 OPR5.170623.007 end.hct.20180515.095719 test-keys
MCU Version: MTCE_KLD_V2.80_1 Mar 1 2018 16:54:22
Model: px5(800x480)
Android version: 8.0.0
Android security patch level: October 5, 2017
Hello,
So I got this head unit - ZOYOSKII Android 9.0 10.4 inch IPS vertical
https://a.aliexpress.com/3Lp78iBm
ANY chance installing custom rom on it?
Also, if anyone knows about buying or fixing the can box I’ll be glad to receive some help..
If connected, steering wheel buttons work unnatural like if you press + button once it goes up full volume same goes for -
No one?
sport93 said:
No one?
Click to expand...
Click to collapse
Currently there is no custom rom for the Airmonts for any reseller.
Sorry, airmonts?
My problem is that on android 8 when driving, YouTube OE similar apps doesn't allow video only when on Parking or not moving, any help with that?
sport93 said:
Sorry, airmonts?
My problem is that on android 8 when driving, YouTube OE similar apps doesn't allow video only when on Parking or not moving, any help with that?
Click to expand...
Click to collapse
Yes, it is an Airmont. It contains the Intel 9853i chip, which has the code name "Airmont".
No, no help. Never (!) drive with video on. First of all it is not allowed (in the countries I know) and you bring yourself, and more importantly, others in life danger.
So do not expect any support about that.
surfer63 said:
Currently there is no custom rom for the Airmonts for any reseller.
Click to expand...
Click to collapse
surfer63 said:
Yes, it is an Airmont. It contains the Intel 9853i chip, which has the code name "Airmont".
No, no help. Never (!) drive with video on. First of all it is not allowed (in the countries I know) and you bring yourself, and more importantly, others in life danger.
So do not expect any support about that.
Click to expand...
Click to collapse
Absolutely right about the safety, I am not stupid to use that while driving..duh.....
I need it for streaming my front camera! I just gave YouTube as an example!
Thanx for lecture tho......
sport93 said:
Absolutely right about the safety, I am not stupid to use that while driving..duh.....
I need it for streaming my front camera! I just gave YouTube as an example!
Click to expand...
Click to collapse
What do you mean with "streaming my front camera". Do you have a wifi dashcam that you want to connect to your head unit via the hot-spot on your phone (shared with camera and head unit) or via the hot-spot on your unit (shared with the camera)?
Or is your dashcam connected via USB and an app on your unit, in which case your app is your only access: nothing can be done than what your app contains as functionality.
Or do you simply mean by connecting your dashcam via USB using it as mass-storage device? In which case it is not streaming but accessing the video file with some media player.
surfer63 said:
What do you mean with "streaming my front camera". Do you have a wifi dashcam that you want to connect to your head unit via the hot-spot on your phone (shared with camera and head unit) or via the hot-spot on your unit (shared with the camera)?
Or is your dashcam connected via USB and an app on your unit, in which case your app is your only access: nothing can be done than what your app contains as functionality.
Or do you simply mean by connecting your dashcam via USB using it as mass-storage device? In which case it is not streaming but accessing the video file with some media player.
Click to expand...
Click to collapse
Ok, so I have 70mai from xiaomi dash cam, it has an app that let's you see what it records and download the videos that already stored inside the cams memory.
Because of the issue with videos while driving I can't use the app...
hello everyone ! i am writing here hoping to find some help. recently i bought an Android Head Unit with 8227L, 2gb of ram and 16 storage. The "issue" is that there is an equalizer option in car settings in the "Sound Settings" menu but it is used only when listening to music by bluetooth, usb storage or on youtube. When trying to use spotify or youtube music, the sound is flat, it lacks bass. It's like it's ignoring the eq. I tried different versions of spotify in hope that it will have a built in eq. I looked in android setting in audio at audio enhancements but nothing is there. I will attach some pictures of the unit with different information that might be useful. Thank you in advance !
altaier91 said:
hello everyone ! i am writing here hoping to find some help. recently i bought an Android Head Unit with 8227L, 2gb of ram and 16 storage. The "issue" is that there is an equalizer option in car settings in the "Sound Settings" menu but it is used only when listening to music by bluetooth, usb storage or on youtube. When trying to use spotify or youtube music, the sound is flat, it lacks bass. It's like it's ignoring the eq. I tried different versions of spotify in hope that it will have a built in eq. I looked in android setting in audio at audio enhancements but nothing is there. I will attach some pictures of the unit with different information that might be useful. Thank you in advance !
Click to expand...
Click to collapse
Sorry to hear about your issues. Luckily, there is a solution and not just to this problem. Check out this guide:
[GUIDE] YT9216BJ !SUPERMOD! - ROOT, Viper4Android, TWRP, Custom UI, brick recovery and more
It does not look like the original rom. It says "OS: ANDROID 10.1" and build number is simply "ANDROID_TRUNK-p0" which I have never heard of.
iceblue1980 said:
Sorry to hear about your issues. Luckily, there is a solution and not just to this problem. Check out this guide:
[GUIDE] YT9216BJ !SUPERMOD! - ROOT, Viper4Android, TWRP, Custom UI, brick recovery and more
Click to expand...
Click to collapse
was reading this post a little... not quite sure how to make a backup... i saw some videos where someone opened the head unit and soldered some wires on some testpoints for the usb connection. do i need to do that also ?
Bob_Sanders said:
It does not look like the original rom. It says "OS: ANDROID 10.1" and build number is simply "ANDROID_TRUNK-p0" which I have never heard of.
Click to expand...
Click to collapse
yeah... best part is i was trying to read the android version using aida installed on the head unit and the app simply crashes.
altaier91 said:
was reading this post a little... not quite sure how to make a backup... i saw some videos where someone opened the head unit and soldered some wires on some testpoints for the usb connection. do i need to do that also ?
Click to expand...
Click to collapse
There are step-by-step instructions included into the guide. With links.
iceblue1980 said:
There are step-by-step instructions included into the guide. With links.
Click to expand...
Click to collapse
there is only a video that shows how to create the backup but it is for phone, nothing mentioned on how to connect the head unit to the pc, and not reffering to power. do i need to use the test points from brick recovery guide in order to create the backup ?
Edit: i saw something about connecting the usb to the 4 pin port, but do i need to use some sort of male to male usb cable ?
Second Edit: my head unit has physical buttons, i saw that the guide is mostly for units without physicial button. Is it safe ?
altaier91 said:
there is only a video that shows how to create the backup but it is for phone, nothing mentioned on how to connect the head unit to the pc, and not reffering to power. do i need to use the test points from brick recovery guide in order to create the backup ?
Edit: i saw something about connecting the usb to the 4 pin port, but do i need to use some sort of male to male usb cable ?
Second Edit: my head unit has physical buttons, i saw that the guide is mostly for units without physicial button. Is it safe ?
Click to expand...
Click to collapse
If you have physical buttons on your unit (like Volume Control) then it's best to use this guide instead, as you currently have Android 8 API 27 installed, judging by your Kernel version.
The procedure of backing up a Mediatek phone and backing up your head unit is exactly the same. You do not need to use Test Point method if your unit is working.
All you need to do is to follow the guide in the link I gave you, step by step and you will be able to perform a full backup.
Hi. I have got the same. No Equalizer for Radio. There is Equalizer for mp3 player ( App is called Music ), but not for FM radio app.
In Music app, I can change tones like bass and treble, but not balance or fader. I can change balance only on Car settings, but there is no option to change fader ( front and rear speakers ).
Is there any way we can add even simple Equalizer to FM radio App? Or is there another FM radio app with built-in Equalizer?
My radio is Hizpo from Hizpo Europe Store, 2GB RAM, 16GB ROM, 8227L CPU, Android 11 ( may be fake ).
I am trying to ask Hizpo Europe Store about this, but for now I am getting default answers.
vwrafi said:
Hi. I have got the same. No Equalizer for Radio. There is Equalizer for mp3 player ( App is called Music ), but not for FM radio app.
In Music app, I can change tones like bass and treble, but not balance or fader. I can change balance only on Car settings, but there is no option to change fader ( front and rear speakers ).
Is there any way we can add even simple Equalizer to FM radio App? Or is there another FM radio app with built-in Equalizer?
My radio is Hizpo from Hizpo Europe Store, 2GB RAM, 16GB ROM, 8227L CPU, Android 11 ( may be fake ).
I am trying to ask Hizpo Europe Store about this, but for now I am getting default answers.
Click to expand...
Click to collapse
Hizpo is known for very bad quality units, intentionally scaling down the hardware to be able to sell the head unit cheaper.
If you are within warranty, return the product.
The reason for your issues is on the hardware side. You have no audio microchip on the motherboard.