Hi to everyone.i have a problem with my reverse camera,i bought a f9212 unit and a have a two different types of camera,i try to connect a both of them but i don't have a picture only the lines when i put it in reverse gear.does anyone have a same problem with that unit and if someone have a solution for problem or maybe sugestion how to solve it,just to now i wired everything by instructions.if someone can help me please i also can put a pictures of connection between unit and camera,or can someone tell me which type of camera have to put.thanks
Is unit FYT type, post Android system information including MCU version.
What does seller suggest when contacted for support? Installer?
Also, From a forum search and reading, what have you found and tried?
Mileboy said:
Hi to everyone.i have a problem with my reverse camera,i bought a f9212 unit and a have a two different types of camera,i try to connect a both of them but i don't have a picture only the lines when i put it in reverse gear.does anyone have a same problem with that unit and if someone have a solution for problem or maybe sugestion how to solve it,just to now i wired everything by instructions.if someone can help me please i also can put a pictures of connection between unit and camera,or can someone tell me which type of camera have to put.thanks
Click to expand...
Click to collapse
Did you use wire splice fittings....if so probably the culprit....best to manually expose the wires and solder them.....i initially used the wire splices that squeeze together.....after having the same result as you i re-examined the splicers and sure enough they weren't making a connection (didn't break through the wire insulation fully)
louforgiveno said:
Did you use wire splice fittings....if so probably the culprit....best to manually expose the wires and solder them.....i initially used the wire splices that squeeze together.....after having the same result as you i re-examined the splicers and sure enough they weren't making a connection (didn't break through the wire insulation fully)
Click to expand...
Click to collapse
i didn't use a wire splice but i can post a pictures or video just see how it looks
marchnz said:
Is unit FYT type, post Android system information including MCU version.
What does seller suggest when contacted for support? Installer?
Also, From a forum search and reading, what have you found and tried?
Click to expand...
Click to collapse
i will post a pictures or videos to see how i did it but i'm sure i did it right
marchnz said:
Is unit FYT type, post Android system information including MCU version.
What does seller suggest when contacted for support? Installer?
Also, From a forum search and reading, what have you found and tried?
Click to expand...
Click to collapse
Mileboy said:
i will post a pictures or videos to see how i did it but i'm sure i did it right
Click to expand...
Click to collapse
That is not what he asked. It helps if you answer questions instead of saying that you did it right. Simply ignoring questions will not help you in getting answers.
Anyway, your unit is not a FYT unit. You are in the wrong sub-forum. I will ask if the moderators can move your thread to the right forum.
about my unit i'm not sure is it a FYT,and i will post a information about mcu version.and about my search i didn't find anything what can help me,i tried but i did'n find anything useful
Related
To start off, this is not a question about the OS or if it will fit. I'm looking that the supposed Android 8.0 PX5 Universal radio.
My question is this, because I cannot find an answer looking at the pictures of it.
In regards to the Aux input and the USB input, where are they located? I couldn't see them on the front or rear (granted the harnesses on the back of the unit may contain the inputs).
Thanks
mrmidnight said:
To start off, this is not a question about the OS or if it will fit. I'm looking that the supposed Android 8.0 PX5 Universal radio.
My question is this, because I cannot find an answer looking at the pictures of it.
In regards to the Aux input and the USB input, where are they located? I couldn't see them on the front or rear (granted the harnesses on the back of the unit may contain the inputs).
Thanks
Click to expand...
Click to collapse
They are located on the rear and connect via the harnesses that come in the box
atlpimpneega said:
They are located on the rear and connect via the harnesses that come in the box
Click to expand...
Click to collapse
Sweet, thanks. This was make or break for me lol
For those of us shopping/passing through... What model number please?
Do pretty much all Joying Sofia/PX5/Airmont type systems use the same cable type for the 1024x600 screens? Additionally, are the CANBUS cables connecting into the mainboards the same?
I ask because the only option for my vehicle was a Sofia non+Joying unit and it's just too slow/hot. If the cables are interchangeable and used across most of these units then I'd just swap in a universal Airmont system behind my units screen. There was/is no other available option for my vehicle besides the Sofia, leading me towards this possibility.
adamlee06 said:
Do pretty much all Joying Sofia/PX5/Airmont type systems use the same cable type for the 1024x600 screens? Additionally, are the CANBUS cables connecting into the mainboards the same?
I ask because the only option for my vehicle was a Sofia non+Joying unit and it's just too slow/hot. If the cables are interchangeable and used across most of these units then I'd just swap in a universal Airmont system behind my units screen. There was/is no other available option for my vehicle besides the Sofia, leading me towards this possibility.
Click to expand...
Click to collapse
You should ask Joying themselves. They are the big experts on this.
However, some time ago there was a thread about this ("broken" cable that is) and someone mentioned they use standard IDE-cables and these cables are therefore interchangeable. The person who asked the question tried with an old IDE cable and it worked.
But again: ask Joying.
surfer63 said:
You should ask Joying themselves. They are the big experts on this.
However, some time ago there was a thread about this ("broken" cable that is) and someone mentioned they use standard IDE-cables and these cables are therefore interchangeable. The person who asked the question tried with an old IDE cable and it worked.
But again: ask Joying.
Click to expand...
Click to collapse
Thanks for the insight about the old thread. I'll ask Joying, but I'm almost positive they'll be of no help as my unit isn't a Joying, it's just another vendor using a Sofia 6021. I hope I'm able to find something out. I'll keep searching and try to find photos somewhere of a disassembled px5 or airmont system and see if I can the cables from the screen and canbus seem the same.
adamlee06 said:
Thanks for the insight about the old thread. I'll ask Joying, but I'm almost positive they'll be of no help as my unit isn't a Joying, it's just another vendor using a Sofia 6021. I hope I'm able to find something out. I'll keep searching and try to find photos somewhere of a disassembled px5 or airmont system and see if I can the cables from the screen and canbus seem the same.
Click to expand...
Click to collapse
I searched a bit further and someone else mentioned it is not an IDE-cable.
All cables Joying uses are interchangeable. I guess that if your unit is lso a FYT unit, it also uses the same motherboard aand therefore also uses the same cable.
Like this one. (And from the looks of it it really seems like an IDE cable to me)
But maybe your connection is different.
Hi Everyone,
So I need some guidance or ideas, I must find a solution to improve my actual MIC for my car.
Today I have a simple mic connected to my phone, but the sound is awful.
I Have this unit in my car ( Suzuki SX4 ):
https://www.aliexpress.com/item/32911968314.html?spm=a2g0o.order_list.0.0.4d661802UpSIO6
unfortunately, this unit doesn't have an AUX port,
so I'm trying to combine something to the back ( see picture attached),
I don't know if I connect something to port 1 or 2 it will work.
So anyone who has the same problem or have some ideas
I will really appreciate it.
Thank you all
Is it an FYT based unit. You're going to need to do some work..
Also, clarify question, whatis it
That's not an FYT, it's an Allwinner T3_P3. It doesn't look like it supports an external MIC, so soldering is probably required to tap into the internal mic contact points if that's even possible.
j-5 said:
That's not an FYT, it's an Allwinner T3_P3. It doesn't look like it supports an external MIC, so soldering is probably required to tap into the internal mic contact points if that's even possible.
Click to expand...
Click to collapse
That's what I thought.
I will keep searching for other alternatives
Thanks!
Hi there. I searched (at least I tried for several hours without luck) this forum and the internet in general.
I have bought a ES8113M from Erisin (https://erisin.de/products/-655) with Android 10 preinstalled and a RN-SS-01 canbus decoder. The issue is that the steering wheel controller is not working. Does anyone have managed to connect the canbus of their Megane to the Android head unit?
Please tell me if you need more info. I am happy for every litte hint on PIN Layouts, factory setting, firmware upgrades or anything else.
Thanks in advance
What did seller suggest when contacted for support?
Is this an FYT based unit?
Thanks @marchnz for your quick reply and thereby help .
Support is poor. I asked two times over two different channels but did not get any answer yet.
Sorry to ask, I am new to Android head units. What do you mean FYT unit? Do you mean the MicroControlerUnit (MCU)-type? Then it's a S32F0 or LEIMA?
It says S32F0_LEIMA-W 20201020-17:05 HD1_7708_D_FF_C8
Oh I see you may ask because I posted to FYT Android head units. If this was wrong sorry and maybe a moderator will provide help and move to the appropriate sub forum (thanks).
@Badger50 thanks for moving this thread to the right forum. I hope someone still reads older (like in days ;-) threads and is able to help and or ask questions for me to better understand and hopefully solve my issue....
neobond said:
@Badger50 thanks for moving this thread to the right forum. I hope someone still reads older (like in days ;-) threads and is able to help and or ask questions for me to better understand and hopefully solve my issue....
Click to expand...
Click to collapse
Is there a possibility to connect the shown connector directly to the radio?
Did you get the right cable tree from the seller? Normally the CAN adapter is connected in between the car-cable tree and the radio.
Is this the right CAN adapter for this radio, provided by the radio seller?
Thank you @rigattoni for your reply. And yes, the Canbus-Decoder ist connected to the Megane on the one side (for power and canbus signal) and the radio (see pinout picture from erisin). I would confirm this as you say it's "normally". I think and hope I have the right harness. At least the QR code says for MEGANE 2 and the website / the seller state it is especially designed and adapted for the Megane 2 (https://erisin.de/products/erisin-e...wifi-4g-dvd-obd-canbus-swc-für-renault-megane).
I did some more digging and analising today. Here are the colors of the ISO-Adapter with the according functions as far as I could find out on the internet (First screenshot). I also compared the cables from the harness and the radio to the canbus adapter (second screenshot). And finally I checked the connections to the radio and the link from there to the canbus adapter again (third screenshot).
It would be nice if someone could confirm some functions and if especially the canbus connections from the harness are the same with your knowledge (at best from another Renault Megane CC2 driver ).
Also I am curious if someone can shre more intel on the canbus cables of a Megane convertible 2.
What if the wiring is fine. I measured 5V between RN-SS-01 PIN3 / PIN4 and GND. To me that makes sense for a canbus information channel... Lots of messages on high...
Can someone provide the correct parameters for the Android head unit? I did a factory reset, an android reset and a SD0 card wipe. Unfortunately the car settings and factory settings remain as I did set them during testing.
For the canbus type (in the factory settings) I think it was 0x00 OFF when I first installed it. I cannot select it from the "select your model" screen (see above, RN-SS-01 missing). But I can set it to 0x85 RENAULT MEGANE SP...
Any intel on what canbus type should work? And how can I test it? In the car settings there is a menu entry steering wheel settings... I did reset it during testing and now even if I press a button on the steering wheel control, nothing happens. I would assume it should pop up a message on which button recognized and ask for what to map it to...
Sorry I am a bloody n00b here....
Sorry for starting this thread, but I would like to finish it with an easy statement: My car hasn't CANBUS (because manufactured >>before 2005<<). So I needed to go with an analogue adapter.
After a very friendly and productive phone call with a German vendor I bought this one here:
https://www.niq.de/lenkradfernbedie...---Scenic---Trafic-Bj--Ab-2000-fuer-auna.html.
From there on very easy to install. Connect the ISO cables from the car to the ISO adapter from NIQ and the departing cables to the ISO connector from the ERISIN head unit. Additionally and to get the steering wheel control working I had to connect SWC1, SWC2 and GND from the NIQ-adapter to the head unit.
Thanks for everyone reading and helping. CASE_SOLVED
Hello, I ordered multimedia for megane 2 ( https://www.aliexpress.com/item/100...020888279!sea!BG!0&curPageLogUid=eazK1RuTtlpe) but the can-bus decoder doesn't work, I ordered another one from another dealer but the coupler is smaller, is it possible to connect the wires to the new one. The new one is labeled "Megane 2" and I got it with cables but they don't fit...
I have an android into my car.
I want to install magisk into the car
Is there any method how to flash the car unit via USB DISK ?
I DIDNT FOUNDED ANY SOLUTION
Youre unlikely to receive any replies with an generic question.
Your first contact for support is the seller of your head unit.
No one here has a crystal ball to know what your hesd unit is and what you have tried to fox the problem.
Take some time to read forums and ask formed questions.
marchnz said:
Youre unlikely to receive any replies with an generic question.
Your first contact for support is the seller of your head unit.
No one here has a crystal ball to know what your hesd unit is and what you have tried to fox the problem.
Take some time to read forums and ask formed questions.
Click to expand...
Click to collapse
Yes sir.
But here they sell only head units and they dont know anything about them.
Just selling them to clients.
I want to root them to bypass some problems like apps, and netflix etc...