Related
Hello,
I'm brand new at Linux (actually less than that) but I'm pretty tech savvy, so i figured if i rooted my phone by following instructions it wouldn't be too bad. well trying to make a long story short...
...rooted my phone, it worked, set programs to run from SD, it worked, then about an hour later I opened up lynda file manager and my phone crashed back to the original home ( i use ahome) I tried to go back into ahome but it didnt show up on my phone, as a matter of fact all of my apps where gone that came from the market. I decided to reset my phone figuring it was just a glitch with the file manager, and i found myself stuck at the blinking android of DOOM!!!! I was able to boot into safe mode, alt-w my phone and restart it.
...ok here is my question thru all of that mess, my 8gb SD card now shows that it is only 7gb and nothing about the 900mb that i turned into sk2 it is gone! I used paragon partition 9 to make it and it wont even show up in that. I want to retry to put apps on my SD, but if my card is gonna keep messing up i dont care to have to go thru all of the steps again.
...has this happened to anyone, or do you know anyway to fix(prevent) it from happening again?
thanks,
-tekka
ps please forgive any errors in this post for i am to tired to try and correct them. gnight everyone
tekkaman_01 said:
I'm brand new at Linux (actually less than that) but I'm pretty tech savvy, so i figured if i rooted my phone by following instructions it wouldn't be too bad. well trying to make a long story short...
...rooted my phone, it worked, set programs to run from SD, it worked, then about an hour later I opened up lynda file manager and my phone crashed back to the original home ( i use ahome) I tried to go back into ahome but it didnt show up on my phone, as a matter of fact all of my apps where gone that came from the market. I decided to reset my phone figuring it was just a glitch with the file manager, and i found myself stuck at the blinking android of DOOM!!!! I was able to boot into safe mode, alt-w my phone and restart it.
...ok here is my question thru all of that mess, my 8gb SD card now shows that it is only 7gb and nothing about the 900mb that i turned into sk2 it is gone! I used paragon partition 9 to make it and it wont even show up in that. I want to retry to put apps on my SD, but if my card is gonna keep messing up i dont care to have to go thru all of the steps again.
Click to expand...
Click to collapse
firstly - not even sure what "tech savvy" means
secondly - when you move the apps to SD for the first time they are all still installed but do NOT show in the market .. they are reset as FREE until you install them a second time
thirdly - how are you checking partitions? because after you wiped the phone you have to redo the process to mount the EXT2 to the phone .. otherwise it seems to not exist
fourthly - fear not .. you are not the first to have this dilemma
busybox df -h
I've had to wipe and re wipe so many times now....good thing it's kinda fun I think I have my partition strait now and have verified my system\sd\apps and data folder.
Is there any way to make the phone still boot up at least if it looses that connection?
derekedw said:
I've had to wipe and re wipe so many times now....good thing it's kinda fun I think I have my partition strait now and have verified my system\sd\apps and data folder.
Is there any way to make the phone still boot up at least if it looses that connection?
Click to expand...
Click to collapse
boot into the recovery console .. that's about it
Ok well I removed my sd card from my G1, and when I put it back in it gives me a "Blank SD Card" notification. I tried resetting my G1, and it didnt work. So I mounted it on my laptop and now it says "Drive G is not formatted would you like to format now?." I am really not trying to lose all my data and apps, and I kno my stuff didnt get deleted, how can this b fixed?
One of two ways, in my eyes.
First try looking at paragon, it might be able to find the partitions again and hopefully repair them.
Two try a data recovery program, personally I like GetDataBack but it only works for FAT and NTFS and not EXT2 if your data and apps were on that partition.
Hmm I tried GDB and it took about an hour and what do u kno I need the licensed version to get my files off, and will Paragon work? Cuz I dont wanna waste another hour.
SD Card fix ok
just put the sd card inside the adapter that all sd card brings when you get it.ok
AND than insert it on your labtop and copy all your files to your computer and format your sd card..
jcarloss said:
just put the sd card inside the adapter that all sd card brings when you get it.ok
AND than insert it on your labtop and copy all your files to your computer and format your sd card..
Click to expand...
Click to collapse
As I said in the original post when I mounted it is said it needed to format, but anyway I found a program and got my files off, but I need to recover my ext2 partition which I dont think will happen
http://www.diskinternals.com/Linux-Recovery/
Never tried it but it might be worth a shot.
jashsu said:
http://www.diskinternals.com/Linux-Recovery/
Never tried it but it might be worth a shot.
Click to expand...
Click to collapse
Yea I tried it but I need the paid version to recover
Have you tried inserting the sdcard into a computer running ubuntu? It will probably recognize the ext partition without any trouble.
Will I b able 2 use ubuntu to restore it?
AsaSpades said:
Will I b able 2 use ubuntu to restore it?
Click to expand...
Click to collapse
I dunno, that's why I asked if you had tried it yet or not. You can always burn a Ubuntu livecd and test it without installing anything. As long as the partition table is intact it should be accessible.
jashsu said:
I dunno, that's why I asked if you had tried it yet or not. You can always burn a Ubuntu livecd and test it without installing anything. As long as the partition table is intact it should be accessible.
Click to expand...
Click to collapse
Its gonna b a long ass download, and the table is intact, but I just need to get the files off it, and id rather kno if ubuntu can do [email protected] b4 I download it, I wish I can jus find a free program for ext2 partitions
Blank SD Card
AsaSpades said:
As I said in the original post when I mounted it is said it needed to format, but anyway I found a program and got my files off, but I need to recover my ext2 partition which I dont think will happen
Click to expand...
Click to collapse
I loaded up Cyanogen's latest last week, formatted my 16gb to EXT2 and Fat32... all was working great for a week, then today, my G1 went blank. Upon a restart, the SD card came up with "Blank SD Card." Viewing the card from my card reader... can't read any files... what's the program that you "found?" I'll probably just fight through reformatting and rebuilding all my files... Later I'll perform file backup when I get it right.
this sound like your problem??
Hey asaspades, something like this happened to me a while back and I could read it on my laptop/cardreader and recover my files and reformat. Obv u have tried this. The thing is the same thing has hsappened not 10 min ago lol. When this happened before I was running my g1 as stock but now I have cyanmod (3.6.8.1 I think) amd apps 2 sd on ext2 partition. I am not at a computer atm but will try to recover the same way as before though I won't be able to access the ext2 partition (will try with ubuntu, hav wubi installer on pc). Oh and I rebooted after I realised something was wrong and now have a constant preparing sd card checking for errors notification. This sound kinda similar to your problem at all? I would like to know what is causing this. Maybe I just have a bad/corrupted sdcard lol. Anyway its really pissin me off not knowing
Left 4 a while and it now says damaged sdcard you may need to reformat.
Ok so.. I finally after months flashed my second rom
HAd some trouble, I have to admit..
DC~~
I had trouble and I did some wiping and messing with my SD chip and that was the only way I could functionally get a flash..
I just spent a day and a half setting my phone up to my liking and its become apparent apps2sd isn't working and my SD card only has one 1.5 partition out of 2 gb.
Sorry if there are posts with directions of how to work from this point to keep everything while enabling apps2sd and transfering
I dont know where to start searching.
Thanks guys.
"The noob"
get a app called dconfig, it has an option to move your apps so they're on the card.
other than that im not sure what youre asking.
it might be simpler just to flash your phone, format your card and start from scratch.
Cloned2 said:
Ok so.. I finally after months flashed my second rom
HAd some trouble, I have to admit..
DC~~
I had trouble and I did some wiping and messing with my SD chip and that was the only way I could functionally get a flash..
I just spent a day and a half setting my phone up to my liking and its become apparent apps2sd isn't working and my SD card only has one 1.5 partition out of 2 gb.
Sorry if there are posts with directions of how to work from this point to keep everything while enabling apps2sd and transfering
I dont know where to start searching.
Thanks guys.
"The noob"
Click to expand...
Click to collapse
do some searching on here, goggle & ppcgeeks for how to root, flash a recovery image, partition your sd card and flash a rom. just make sure the guide you are using and the rom you use is for a cdma based hero.
http://forum.ppcgeeks.com/showthread.php?t=90380 heres good guide to get you started.
I'm rooted I might just need to flash the Rom with the SD card.formatted correctly... I'm going to try to re find where the apps are stored and save them... id love to just be able to correct my SD config and set up apps2sd and move em over so I can keep my home screen set up as well as the info supplied in my apps and todo lists..
Thanks for the info ... on the road right now (passenger.seat )
Maybe I'm not a newb, I'm just stupid... I rooted using ubuntu karmic and I had apps2sd working before I moved to damage control
Sent from my HERO200 using Tapatalk
hmm.. Damage control rom comes with Dconfig and it has apps2sd enabled and move apps to sd checked.
Ok heres the thing..
I had a Modaco rom before and with apps2sd enabled and the SD formatted properly.
Plugging my phone into a computer would open up 2 drives... One 1 designated to be 1.5 gb and another .5 gb
How ever now I only see one.. the 1.5 gb
My memory is running low as if everything i've installed is in the phone.
searching through the phone i can't seem to find where these apps are being saved...
Are they on the elusive .5 gb partition I can't seem to see??
i think not... I just rebooted and my available space is 63.74mb
It's all becoming a no brainer that i should reflash the rom with the correct specifications to the SD chip...
But what I want to know, is there a way around this. ( I don't see any options, but I'd love to reformat my SD correctly and get apps2sd working on my own, moving all my apps over there while keeping any stored data intact...) <--- is this possible??
[maybe i should learn how to communicate clearly LOL]
For the moment, Ill back up my SD contents and hunt down how to partition correctly.. then I'll see if I can't find the folders where it is storing downloaded apps... then I'll disable then enable the apps2sd setting in dconfig and download an app... if all goes well i'll start pushing my apps over and do the whol "fix apk uid" in the recovery menu...
Hell maybe ill even decide to get a newer recovery besides 1.2.3 while im at it hahah.. any suggestions would be appreciated
# cd /data/app
# pwd
/system/sd/app
# cd /data/app-private
# pwd
/system/sd/app-private
Click to expand...
Click to collapse
So... Why is my memory so low???
I'm about to take my SD chip out and see if I cannot access the contents of these folders without it in...
MY APPS2SD IS WORKING AND HAS BEEN WORKING
Sorry guys... somethings just up[or rather DOWN] with my memory and my SD card reads differently...
Cloned2 said:
Being a newb SUCKS!
Click to expand...
Click to collapse
There's only one way to stop being a n00b: Learn.
You're doing fine. My suggestion is to not take it all on at once. Focus on one problem, fix it, learn from it and move on to the next one. You'll be a pro in no time.
I would guess that you need to repartition the SD card when moving from one ROM to the next, but I've never really played with apps2sd. See? You know more about it than I do!
download app: quick systems info
to see if your a2sd is working and how much is being used.
use the dconfig to make sure you have dalvik cached moved to sd... reboot the phone.
i am guessing at this....
you say you had a2sd working before with Madaco and could see 2 drives... that sounds wrong to me. if a2sd was working, then you should not see the 2nd drive. you are only able to see the main larger drive and that is it.. the others are used by android and not available to us.
now that you can not see the 2nd drive. sounds like a2sd is working. the app i suggested should confirm for you.
I did get everything working and my memory remains the same when I install applications.... perhaps I could see the second drive because I'm running Linux and/or the way I formatted the sd or the extension...
Sent from my HERO200 using Tapatalk
I think what you are describing is your SD-EXT partition (the a2sd partition you made). If you have a 2GB card and partitioned your card to be .5GB EXT, then it will appear your SD is 1.5GB. You get what I'm saying?
I used to be able to see 2 partitions as well. I think it was only with 1.5 ROMs.
If you want to mount both partitions then all you need to do is reboot into recovery and select the USB mount. Then both partitions will show up.
But you really don't need to mess with that second partition. Go to the market and download Titanium Backup. That will backup all your apps and settings. Restoring is a little annoying to do since you have to click for every app but if you buy the donate version then you don't have to do that.
centran said:
I used to be able to see 2 partitions as well. I think it was only with 1.5 ROMs.
If you want to mount both partitions then all you need to do is reboot into recovery and select the USB mount. Then both partitions will show up.
But you really don't need to mess with that second partition. Go to the market and download Titanium Backup. That will backup all your apps and settings. Restoring is a little annoying to do since you have to click for every app but if you buy the donate version then you don't have to do that.
Click to expand...
Click to collapse
I perfer Backup For Root Users... does the same thing but is free and is one-click one-shot deal.
I not sure if this is the right area, if not, i apologize, feel free to move and/or flame. lol
Anyway, I'm running fr008 liberated froyo and all of a sudden my apps stopped showing up in the app drawer. the ones i had an icon for on the home screen would show up, but be the default little gear icon thing, on click, nothing would happen (market also because that icon and wouldnt work). I tried wiping dalvik cache, cache, and finally ended up just trying to restore nandroid. Wellll.... Now the market is gone totally, but the strange thing, is that the apps show up under settings->applications, but not in the drawer at all.
I searched on this site, but honestly...I'm not even sure what words to use, everytnhing just wasnt relevant to my search. I'll be happy to continue searching (and i'm still browsing through pages), but maybe someone has had this issue and can either help me out, or point me in the right direction. Thanks.
Try a different home app. LauncherPro is the best so far in my opinion.
Well, Ideally I would like to keep sense. that's why i had chosen the rom that i did instead of CM. I just don't understand why they were there working just fine, then all of a sudden they werent. Worse comes to worse I just flash cm7 and start over, i'm just giving it a couple days before i do that.
Astro also didn't show up, and i tried doing the .zip update method through clockwork, but i move the files over, then reset the phone, and they don't show up on the sdcard...So i reboot and check for the gapp.zip on the sdcard, and its no longer there. Wtf is going on?
**edit: for some reason the phone reset and the market showed up again. Obviously my apps are in my market account, but they still show up under settings->application. I still don't know *WHY* this happened, and i dont want to reload everything on it and lose the info i had, especially if its going to be a recurring thing.
Psionfenix said:
Well, Ideally I would like to keep sense. that's why i had chosen the rom that i did instead of CM. I just don't understand why they were there working just fine, then all of a sudden they werent. Worse comes to worse I just flash cm7 and start over, i'm just giving it a couple days before i do that.
Astro also didn't show up, and i tried doing the .zip update method through clockwork, but i move the files over, then reset the phone, and they don't show up on the sdcard...So i reboot and check for the gapp.zip on the sdcard, and its no longer there. Wtf is going on?
**edit: for some reason the phone reset and the market showed up again. Obviously my apps are in my market account, but they still show up under settings->application. I still don't know *WHY* this happened, and i dont want to reload everything on it and lose the info i had, especially if its going to be a recurring thing.
Click to expand...
Click to collapse
This is a total WTF! Since you are running FR008, are you using DT A2Sd to store your apps on the SD card? If not, you may want to look at this thread:
http://forum.xda-developers.com/showthread.php?t=790786
Once you enable A2SD by creating a EXT partition on your SD card, you can use A2SD to check the apps that are installed.
Yeah, my sd card has the ext partition from when i had the stock rom (trying to use dt's a2sd with that, got fed up and flashed fr008, haha).
But I only had a couple apps on the SD card, and strangely enough, those were the only ones showing in my app drawer. (now they aren't...)
But I'll check that link and see whats going on with it, i'm just lost. haha.
Psionfenix said:
Yeah, my sd card has the ext partition from when i had the stock rom (trying to use dt's a2sd with that, got fed up and flashed fr008, haha).
But I only had a couple apps on the SD card, and strangely enough, those were the only ones showing in my app drawer. (now they aren't...)
But I'll check that link and see whats going on with it, i'm just lost. haha.
Click to expand...
Click to collapse
If you had an EXT partition on the SD card when you flashed FR008 (which has DT A2SD built-in) will use it. Sounds like you may want to run the "a2sd check" command in the terminal emulator to see what's going on?
Hmm. I ran a2sd check:
it says "ext partition found, but not mounted, your rom may not be steup to run apps2sd. xxxxx
your partition may be ext4 but rom may not support ext4"
also, my apps are no longer showing up in market...i'm cursed. lol
a little update.
It seems my sd card was screwy. I swapped it for another one temporarily (copy/pasted the contents though, that didnt work, so i formatted it). The phone seems to work fine, but for some reason, my apps still show up in settings > applications. But no where else. I can't use astro to back them up, and I'm not sure what else i can possibly try (aside from wiping everything and installing a new rom, any suggestions on what rom, i'm thinking cm7, but i want sense ui still).
I'm just worried that its something *I* did and i dont want to do it again.
I had a similar issue before...and what I would do is:
1. Factory Wipe, Wipe Caches and Format both system and SDCard with an ext partition
2. Flash the ROM of your choice, then GAPPS
3. Start the process of setting everything up again.
It's the nature of the beast when using DT A2SD...when the card goes, so does everything on it, including your apps. It would be a great idea to back up everything on your phone (nandroid) then copy the nandroid backup (in the Clockworks folder on your SDCard) to a safe place (not on the SDCard) so that when this happens again you have a backup of your phone that doesn't die with the card. Don't worry this doesn't happen often, but a you see, it can happen.
Yeah, i sort of guessed it had to do with the sd card (had a small glitch about 3 days prior to this, with a program that was on the sd card). I just don't know why the apps that werent on the sd card went with the sd card, but showed up in settings -> applications still (though i could do nothing with them, and if i tried to "clear data" on them, it would fail). I flashed CM7 last night and started setting everything up again. I'm going to do the whole nandroid backup, and manual backup where i can pull the apks out of the backup, so i can have a script to reinstall everything quickly when I inevitably change roms again. lol (as you can see, i've been a member for some years now, started back with the titan/ppc6800)
anyway, if you didnt read all that above, i'll summarize:
THANKS.
i had the a similar problem my apps werent showing in my drawer and my widgets on my home screens kept saying problem loading widget so i wiped everything reinstalled my rom switched to adw ex and everything has been fine since
So I installed LineageOS about 4 months ago or so and out of nowhere the phone just turned itself off and wouldn't boot, it goes past the motorola screen into the LineageOS booting screen, and it just keeps loading and loading, I can access TWRP, and I tried installing an older version of LineageOS and wiping the cache and dalvik, that seemed to have worked but the home button wouldn't work and some core system thing kept crashing and warning me on the screen and I decided to reboot, and now I'm stuck at the booting screen loading forever again, basically I'm trying to NOT wipe the phone data UNLESS I'm able to backup my apps with titanium backup or something like that; so since I managed to make it boot once maybe it ain't as bad as I see it, so yeah here hoping to get some options to fix it.
dante0397 said:
So I installed LineageOS about 4 months ago or so and out of nowhere the phone just turned itself off and wouldn't boot, it goes past the motorola screen into the LineageOS booting screen, and it just keeps loading and loading, I can access TWRP, and I tried installing an older version of LineageOS and wiping the cache and dalvik, that seemed to have worked but the home button wouldn't work and some core system thing kept crashing and warning me on the screen and I decided to reboot, and now I'm stuck at the booting screen loading forever again, basically I'm trying to NOT wipe the phone data UNLESS I'm able to backup my apps with titanium backup or something like that; so since I managed to make it boot once maybe it ain't as bad as I see it, so yeah here hoping to get some options to fix it.
Click to expand...
Click to collapse
With titanium backup its possible to restore data from a nandroid backup.
Did you installed exactly the same rom over the actual one again? Did you tried wipe cache and art?
Make a backup of system, data, boot and save it to your computer just in case.
strongst said:
With titanium backup its possible to restore data from a nandroid backup.
Did you installed exactly the same rom over the actual one again? Did you tried wipe cache and art?
Make a backup of system, data, boot and save it to your computer just in case.
Click to expand...
Click to collapse
When the phone got stuck at the loading screen I tried installing an old LineageOS rom, that initiated with the errors I mentioned, and when I did that I wiped the cache and dalvik/art cache as well, and now I've tried deleting them again many times and it doesn't seem to work, and quick question, the nandroid backup is basically doing a backup of what you told me, system, data and boot, right? Would that save all apps and their data, let's say, a progress in a game, or all settings exactly like I left them on an app.
Also I don't know if it's me, but I keep deleting some data from my SD card and it just keeps reappears again, even tho I'm seeing them getting deleted, same with pasting new stuff on my SD card, I'm doing all this thro my PC with ADB, tho pasting and deleting stuff on the internal storage works just fine.
Yes, a nandroid backup from your system/data partition saves all your additional apps with settings.
strongst said:
Yes, a nandroid backup from your system/data partition saves all your additional apps with settings.
Click to expand...
Click to collapse
Yeah it says my SD card is on "Read-only" and can't complete the backup, according to some thread it's a FAT error and I gotta mount the SD card on my PC and fix the error thro windows, but I have no SD card reader, meanwhile I'll wait for other answers until I find an SD card reader.
The issue was most likely caused by updating LineageOS many times over and over again eventually causing a corruption, that and my micro SD dying and just being read only made it worst, so yeah, I'd recommend erasing cache, dalvik and system every few months to update LineageOS, well I wouldn't take this that seriously, since I don't really know that much, but yeah, phone is working just fine now, just installed everything from scratch and google helped me restore my apps.
dante0397 said:
Yeah it says my SD card is on "Read-only" and can't complete the backup, according to some thread it's a FAT error and I gotta mount the SD card on my PC and fix the error thro windows, but I have no SD card reader, meanwhile I'll wait for other answers until I find an SD card reader.
Click to expand...
Click to collapse
The isssue you are talking about(sd read only mode). Im facing this problem and have done each and every method possible to give write access to sd card.
Well i can access the data(like can put anything i want in it) but can't modify it(copy, move, delete and even format). I looked for way arounds and tried my own method(even risked the data on sd) but no good comes out of it.
Im using rr and not lineage so we are on different boats in the same river.
If you get any solution pls inform me ans ill try it.
DgnrtnX said:
The isssue you are talking about(sd read only mode). Im facing this problem and have done each and every method possible to give write access to sd card.
Well i can access the data(like can put anything i want in it) but can't modify it(copy, move, delete and even format). I looked for way arounds and tried my own method(even risked the data on sd) but no good comes out of it.
Im using rr and not lineage so we are on different boats in the same river.
If you get any solution pls inform me ans ill try it.
Click to expand...
Click to collapse
Some sdcards become read only over time, had also 2 of them which had those issues. See reviews on Amazon. It's a known problem of the SD card itself. Try to format your card with pc and check if it's writable again, otherwise it's dead.
strongst said:
Some sdcards become read only over time, had also 2 of them which had those issues. See reviews on Amazon. It's a known problem of the SD card itself. Try to format your card with pc and check if it's writable again, otherwise it's dead.
Click to expand...
Click to collapse
Thanks for the concern and yeah i know that it is a problem with sd cards.
The thing i was saying that i literally tried each and every method formatting from pc to even twrp. I even used cmd for it and as a out come non of them work.
Well sd card is not dead. I can move, copy thing in it the problem comes after that. I cant delete or then move from sd card to other location. Its like read only compact disk(it will clear the idea what im talking about). My sd card is working as a read only cd does.
DgnrtnX said:
Thanks for the concern and yeah i know that it is a problem with sd cards.
The thing i was saying that i literally tried each and every method formatting from pc to even twrp. I even used cmd for it and as a out come non of them work.
Well sd card is not dead. I can move, copy thing in it the problem comes after that. I cant delete or then move from sd card to other location. Its like read only compact disk(it will clear the idea what im talking about). My sd card is working as a read only cd does.
Click to expand...
Click to collapse
That's what I mean: they become read only. Search on Google.
I had the same issue. I tried reinstalling Linage OS, clearing the cache, etc. But what finally resolved it was clearing the data. So the issue was corrupted data that was keeping the device from booting.