Database Users

Rooting Galaxy Tab A T590 help?

Well, I started following this guide https://forum.xda-developers.com/galaxy-tab-a/how-to/root-samsung-galaxy-tab-10-5-2018-root-t3887848, and I got as far as patching the boot.img with Magisk. But in the Magisk setting, there is no option to save the boot img as tar so when I try to load it into Odin it won't detect the file.
I'm really after rooting my device and would appreciate any help that would bring that

The last version of Magisk manager (7.1.2) lets you patch the entire AP section of the original ROM. The section is in .tar format so you shouldn't have problems.

Supercoach1970 said:
The last version of Magisk manager (7.1.2) lets you patch the entire AP section of the original ROM. The section is in .tar format so you shouldn't have problems.
Click to expand...
Click to collapse
So the AP file that's about 3gb that I downloaded to extract the boot.img do I just use Odin to patch the whole thing or do I do it via magisk manager? Sorry last thing I rooted was my galaxy s6 and it was much different.

Apexpredator12 said:
So the AP file that's about 3gb that I downloaded to extract the boot.img do I just use Odin to patch the whole thing or do I do it via magisk manager? Sorry last thing I rooted was my galaxy s6 and it was much different.
Click to expand...
Click to collapse
Yes, S6 was quite different. Now, once you've extracted AP from your downloaded ROM (it MUST be the exactly ROM, with same name of the one you have on your device!!), copy it on your device and from Magisk manager PATCH it. Done this, with Odin you can flash again the AP section. And, of course, pay attention on flashing operation: it's always dangerous! (I'm not responsible for problems you can have flashing the device.)

Supercoach1970 said:
Yes, S6 was quite different. Now, once you've extracted AP from your downloaded ROM (it MUST be the exactly ROM, with same name of the one you have on your device!!), copy it on your device and from Magisk manager PATCH it. Done this, with Odin you can flash again the AP section. And, of course, pay attention on flashing operation: it's always dangerous! (I'm not responsible for problems you can have flashing the device.)
Click to expand...
Click to collapse
Ok thank you

Supercoach1970 said:
Yes, S6 was quite different. Now, once you've extracted AP from your downloaded ROM (it MUST be the exactly ROM, with same name of the one you have on your device!!), copy it on your device and from Magisk manager PATCH it. Done this, with Odin you can flash again the AP section. And, of course, pay attention on flashing operation: it's always dangerous! (I'm not responsible for problems you can have flashing the device.)
Click to expand...
Click to collapse
But if I do brick it or get suck in a boot loop during the process, how would I restore the original firmware?

Apexpredator12 said:
But if I do brick it or get suck in a boot loop during the process, how would I restore the original firmware?
Click to expand...
Click to collapse
Exactly! That's the problem: pay attention!! Don't do dangerous operations! There's a good guide somewhere in this forum about installing Magisk.

I finally did it today. I rooted my T590
https://forum.xda-developers.com/galaxy-tab-a/help/root-t590xxu2ark2-magisk-gta2xlwifixx-t3937275

TWRP, Rooting and Custom Rom HELP SM-T510 Tablet Tab A 10.1

Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)

You don’t unzip the .tar files. Keep them as is.

secretwolf98 said:
You don’t unzip the .tar files. Keep them as is.
Click to expand...
Click to collapse
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5

My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.

fountainb234 said:
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5
Click to expand...
Click to collapse
Just rename the file cutting off the .md5.

is it possible to downgrade from sk5 to sk1? you cannot upgrade to a later version, and I know downgrading can have reverse effects on the tablet. I have same tablet I would like to know. if I flash sk1 is there a way to fix it if it bricks?
Magendanz said:
My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.
Click to expand...
Click to collapse

fountainb234 said:
Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)
Click to expand...
Click to collapse
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!

framC0 said:
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.

lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?

framC0 said:
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?
Click to expand...
Click to collapse
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.

lewmur said:
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.
Click to expand...
Click to collapse
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
EDIT: i dont have OEM unlock option in DEV but its unlocked, i checked when in downloaded mode it says "lock device and..." so its unlocked.

framC0 said:
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
Click to expand...
Click to collapse
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.

lewmur said:
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.
Click to expand...
Click to collapse
YES!!!!!! YOU ARE THE BEST!!!! Done! It booted directly to TWRP!!! THANK YOU!!!! So now will flash Magisk with twrp right? Alawys rooted my devices but this 510 wow...never saw a thing like this
Edit: The fight continues - So i did wipe and format data in TWRP and reboot system and im IN. Installed Magisk 23.0.apk and noticed that im still with "RAMDISK: no"... Searching how to do next to root! Im very near of the goal!!!! Finally! Big thanks to lewmur!

lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file.
Click to expand...
Click to collapse
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
EDIT: Since an older version dont know witch, Magisk Manager and Magisk are joined in apk so i just flashed Magisk 23.0.apk in TWRP...rooted!!! DONE!!!! FINALLY

framC0 said:
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
Click to expand...
Click to collapse
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.

lewmur said:
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.
Click to expand...
Click to collapse
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!

framC0 said:
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!
Click to expand...
Click to collapse
USB cables are notorious for being flaky. Sometimes it helps to just turn the cable over and plug it back in. I always keep several on hand so that if I have connection problems I can try another cable.

Did anybody unlock the bootloader and root the unit?

As topic asked.
It looks like OEM unlock (in developers settings) is hidden on US phone models
The last Samsung I made root was S5e and I am wondering is S6L possible

sadly no
Nope, Samsung hasn't even released the stock firmware yet so any development is currently halted

Can the user unlock the bootloader then?

Haven't tried it, but it should be possible

I don't know about unlocking the bootloader. This page (updated in Apr 2020) showed a way https://www.getdroidtips.com/root-samsung-galaxy-tab-s6-lite/ to root it. I haven't tried it yet. If anybody tries, please leave some comments.
Edit: how to unlock the bootloader https://gearallnews.com/how-to-unlock-bootloader-of-samsung-galaxy-tab-s6-lite-guide-2020-2/

I managed to unlock the bootloader with the tutorial on http://androidbiits.com/root-samsung-galaxy-tab-s6-lite-sm-p610-sm-p610x-easily/, but rooting with the Magisk file failed.
I think i will try it later.
The bootlader is now unlocked, so it gives me a warning on the screen every time i boot the tablet.
I have the P610 version, only WiFi, no LTE

I tried it for the second time and now succeeded.
Installed Titanium Backup and removed some useless system apps.

Iceman66 said:
I tried it for the second time and now succeeded.
Installed Titanium Backup and removed some useless system apps.
Click to expand...
Click to collapse
Has Samsung released the firmware tho? I wanted to root but scared if the process failed I cant flash the old ROM

StuKaGel said:
Has Samsung released the firmware tho? I wanted to root but scared if the process failed I cant flash the old ROM
Click to expand...
Click to collapse
You can find it here: https://samfrew.com/model/SM-P610/ I found the link in the turorial.
Be aware that this is for P610 (only Wifi), but you can find the firmware for the other versions off the S6 Lite as well on this website.

Iceman66 said:
I tried it for the second time and now succeeded.
Installed Titanium Backup and removed some useless system apps.
Click to expand...
Click to collapse
Hi, thank you very much for reporting it. Do you know if Netflix still works after the unlocking and rooting?

dxxvi said:
Hi, thank you very much for reporting it. Do you know if Netflix still works after the unlocking and rooting?
Click to expand...
Click to collapse
Yes, Netflix works after installing Magisk module liboemcrypto disabler :good:

Iceman66 said:
dxxvi said:
Hi, thank you very much for reporting it. Do you know if Netflix still works after the unlocking and rooting?
Click to expand...
Click to collapse
Netflix works after installing Magisk module liboemcrypto disabler :good:
Click to expand...
Click to collapse
I just read about that module. I post the info here for lazy people like me "Please note that a consequence of using this module is that Widevine DRM will fall back to using L3 instead of L1. This means that Netflix will play all content in SD quality, regardless of your subscription type"
https://forum.xda-developers.com/apps/magisk/magisk-liboemcrypto-disabler-drm-t3794393

dxxvi said:
I just read about that module. I post the info here for lazy people like me "Please note that a consequence of using this module is that Widevine DRM will fall back to using L3 instead of L1. This means that Netflix will play all content in SD quality, regardless of your subscription type"
https://forum.xda-developers.com/apps/magisk/magisk-liboemcrypto-disabler-drm-t3794393
Click to expand...
Click to collapse
The strange thing is, that after removing the module and rebooting tablet, Netflix is still working

Iceman66 said:
I managed to unlock the bootloader with the tutorial on http://androidbiits.com/root-samsung-galaxy-tab-s6-lite-sm-p610-sm-p610x-easily/, but rooting with the Magisk file failed.
I think i will try it later.
The bootlader is now unlocked, so it gives me a warning on the screen every time i boot the tablet.
I have the P610 version, only WiFi, no LTE
Click to expand...
Click to collapse
I tried using this guide and am getting a vbmeta signature failure upon flashing with odin. Did you run into any issues like that when you got your device rooted? I'm also using the P610

Same here. Not a noob despite being long time lurker and not posting. I have been rooting devices forever but this one is escaping me.
Using the guide and getting a vbmeta signature failure as well. I tries 3 various firmware versions to Magisk patch the required 4 files, but get the same error every time.
So close yet so far...
Thanks
Eric

Iceman66 said:
The strange thing is, that after removing the module and rebooting tablet, Netflix is still working
Click to expand...
Click to collapse
Yes, it does work but won't go above SD.
I bought the S6 Lite as a replacement for a Tab Pro 10.1 (SM-T520) which was running LOS 14.1. Netflix was working, but looked like crap. Downloading prior to watching improves the quality a bit, but you could see it is SD instead of HD.
I have rooted every Android devices I have had, but this time I do not want to lose the Widevine L1 certification. The SM-T520, which was in 2014 Samsung's high end tablet (>$600), only had one update from 4.4.2 to 4.4.4....rooting was the only way to move up. I hope Samsung will support this device a little better.

b0bness said:
I tried using this guide and am getting a vbmeta signature failure upon flashing with odin. Did you run into any issues like that when you got your device rooted? I'm also using the P610
Click to expand...
Click to collapse
Here is what ik did:
Starting from the step when the firmware is downloaded
Unpack the firmware with Winrar
Select the boot.img l4 file and use 7-Zip to transform it to boot.img
Transfer the boot.img file to tablet and patch the file with Magisk manager
Transfer the patched-boot.img to computer
Rename the file to boot.img
Put tablet in Bootloader-mode
Flash the boot.img with Odin 3.14
The first Block in Odin will turn green if flashing is succesfull
Now start up the tablet
In my case, a got a message that the software is damaged, i choose the option to restore to factor settings
After a few minutes the tablet booted and i installed Root-checker, rooting was succesfull

Iceman66 said:
Here is what ik did:
Starting from the step when the firmware is downloaded
Unpack the firmware with Winrar
Select the boot.img l4 file and use 7-Zip to transform it to boot.img
Transfer the boot.img file to tablet and patch the file with Magisk manager
Transfer the patched-boot.img to computer
Rename the file to boot.img
Put tablet in Bootloader-mode
Flash the boot.img with Odin 3.14
The first Block in Odin will turn green if flashing is succesfull
Now start up the tablet
In my case, a got a message that the software is damaged, i choose the option to restore to factor settings
After a few minutes the tablet booted and i installed Root-checker, rooting was succesfull
Click to expand...
Click to collapse
Thanks for the steps, got it working! To add a note for those reading the above comment. After renaming the file to boot.img, use 7z and 'add to archive' the boot.img to make it a boot.tar for Odin to be able to flash it.
Another thing that might help folks: The boot.img.l4z wasn't working with 7z to decompress the l4z. I installed l4z and moved the boot.img.l4z into the folder with l4z.exe. Then I ran the command 'l4z boot.img.l4z boot.img' in the folder where l4z.exe was located to get the boot.img.

Сan some one to upload a ready-made installation ROM file for direct flashing into Odin please? Cause I can not understand how to transfer and patch all this different parts together. I don't understand which files I need to marry each other
Please help to root with MAgisk tab6 lite (wifi only SM-P610).

Iceman66 said:
Here is what ik did:
Starting from the step when the firmware is downloaded
Unpack the firmware with Winrar
Select the boot.img l4 file and use 7-Zip to transform it to boot.img
Transfer the boot.img file to tablet and patch the file with Magisk manager
Transfer the patched-boot.img to computer
Rename the file to boot.img
Put tablet in Bootloader-mode
Flash the boot.img with Odin 3.14
The first Block in Odin will turn green if flashing is succesfull
Now start up the tablet
In my case, a got a message that the software is damaged, i choose the option to restore to factor settings
After a few minutes the tablet booted and i installed Root-checker, rooting was succesfull
Click to expand...
Click to collapse
[i followed your steps but now i get the [BLOCKED BY OEM LOCK] when using odin to flash boot.
i unlocked bootloader in developer settings. no idea what step i missed.
am using Firmware U1ATF2

[ROOT][TB-X505X] Rooting Lenovo Tab M10 TB-X505X

This guide is now obsolete. Please check my new guide. It has a custom recovery for this device as well as a rooting guide. Refer to this guide only for installing adb and unlocking bootloader.
This rooting guide is for the Lenovo Tab M10 X505X only.
I plan to work on a custom recovery for this tab as well and probably a custom rom in the future.
So please consider donating so that I can keep up the work.
Donations
Google Pay
This will work only on the version "TB-X505X_S001037_200718_ROW". Check it in the Settings > System > About Tablet > Build Number. If it is the newer "X505X_S001038_200819_ROW", do a factory reset and make sure it is the "TB-X505X_S001037_200718_ROW" before proceeding.
Once a custom recovery is made, OTA updates can be applied without losing root. So do not update the tablet until a custom recovery is developed for the device. I plan to develop a custom recovery for it as soon as possible, so please support me.
Anything that goes wrong in this tutorial is not my responsibilty. Proceed at your own risk.
Downloads
patched_boot.img
Step 1. ADB and Fastboot Installation [If adb and fastboot are already installed, skip to Step 2]1. Download the platform tools for your OS from this link.
2. Extract the zip file and place the contents in a folder "platform-tools".
3. To confirm if adb is working, open a command prompt "platform-tools" and run the following command.
Code:
adb version
If it returns the adb version, its done.
Step 2. Unlocking BootloaderWe have to unlock the bootloader inorder to root the device.
Warning: Unlocking bootloader wipes data on the device. It is recommended to backup your data. Proceed at your own risk.
1. Now in the tab, goto Settings > System > About Tablet. Multiple tap the "Build Number" till the developer options are enabled.
2. Goto the developer options and turn on the "OEM unlocking".​3. Power off the device.
4. Turn it on by holding Power Button + Volume Down. Once the screen turns on. leave the power button but continue holding the Volume Down button until the fastboot mode is shown.
5. Now open a command prompt in "platform-tools" and now run the following command:
Code:
fastboot oem unlock-go
Your Bootloader is now succesfully unlocked.​Step 3. RootingNow to root the tab, download the "patched_boot.img" from the top of this post. Copy the file to the "platform-tools" folder.
Make sure the tab is still in the fastboot mode. Otherwise go back into the fastboot mode as instructed before.
Now run the following command:
Code:
fastboot flash boot patched_boot.img
Congratulations, you have rooted your tab.:highfive:
To complete the process, run the following command.
Code:
fastboot reboot
Once the tab turns on, goto this link and download the latest version of Magisk apk and install it. It is required to control the root privileges for other apps.​That's all. You now have a rooted tab.:victory:
If this helped you, hit the thanks button.
And keep tuned for new stuff that are to come for this device.

Thanks for this thread for the TB-X505X.
Shamil Niyas said:
I plan to work on a custom recovery for this tab as well...
I plan to develop a custom recovery for it as soon as possible...
Click to expand...
Click to collapse
Have a look at this post for a TWRP that works with the TB-X505F. It might work for the TB-X505X, provided the X505X uses the SDA429 soc. That version of TWRP is unofficial and does not decrypt the data partition.
If the X505F version of TWRP works for you, then you won't need to patch the boot image - you can just install the Magisk update.zip in TWRP. This saves you from having to release a new patched boot image every time there's an OTA.
Shamil Niyas said:
Once a custom recovery is made, OTA updates can be applied without losing root.
Click to expand...
Click to collapse
With the TB-X505F/L, TB-X605F/L and TB-X705F/L we've found that you need to uninstall Magisk to apply OTAs. This is because Lenovo's OTA updater scripts verify you have unmodified boot, system, vendor and firmware partitions. So make sure you backup these partitions as stock.

Yahoo Mike said:
Thanks for this thread for the TB-X505X.
Have a look at this post for a TWRP that works with the TB-X505F. It might work for the TB-X505X, provided the X505X uses the SDA429 soc. That version of TWRP is unofficial and does not decrypt the data partition.
If the X505F version of TWRP works for you, then you won't need to patch the boot image - you can just install the Magisk update.zip in TWRP. This saves you from having to release a new patched boot image every time there's an OTA.
With the TB-X505F/L, TB-X605F/L and TB-X705F/L we've found that you need to uninstall Magisk to apply OTAs. This is because Lenovo's OTA updater scripts verify you have unmodified boot, system, vendor and firmware partitions. So make sure you backup these partitions as stock.
Click to expand...
Click to collapse
I gave a look at the TWRP image. Unfortunately, X505X does not boot into the recovery image. It would have been great if it worked. I guess it is because of the different processor, as you mentioned.
It is the same for X505X as well. OTA cannot be applied without uninstalling Magisk. So I guess OTAs are a no-go until a custom recovery is developed. The latest update is also just a boot image patch. So there is no way to use magisk on that.
Thanks for the advice.

But i updated to android 10 S001122_200915
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.

Excuse me if this was asked before. Is there a rooting method for TB-X505F? It's the model that is sold in Europe. I'm thinking of buying this.

ShAd0W_z0nE said:
Excuse me if this was asked before. Is there a rooting method for TB-X505F? It's the model that is sold in Europe. I'm thinking of buying this.
Click to expand...
Click to collapse
This post has instructions for the X505F, under "How do I root my device?".

cYBER~VeTeRaN said:
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.
Click to expand...
Click to collapse
I'm currently working on the twrp for this device. Once it is finished it should be able to root without downgrading.

cYBER~VeTeRaN said:
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.
Click to expand...
Click to collapse
Hello cYBER-VeTeRaN,
I have compiled a TWRP for X505X. You can find it here. Install the magisk zip from TWRP and you should be able to root your tablet regardless of the verison.:victory:
Hit the thanks button.

Shamil Niyas said:
Hello cYBER-VeTeRaN,
I have compiled a TWRP for X505X. You can find it here. Install the magisk zip from TWRP and you should be able to root your tablet regardless of the verison.:victory:
Hit the thanks button.
Click to expand...
Click to collapse
Thanks sir. Great job and I'm also from kerala, nice to meet you

Good afternoon.
I have this version ( Build number TB-X505F_S001142_210804 ROW ) of Android on my Lenovo TB X505F.
Can you tell me if this method works with this version of Android?

jsvenancio said:
Good afternoon.
I have this version ( Build number TB-X505F_S001142_210804 ROW ) of Android on my Lenovo TB X505F.
Can you tell me if this method works with this version of Android?
Click to expand...
Click to collapse
[RECOVERY][TB-X505F][UNOFFICIAL] TWRP 3.6.x for Lenovo Tab M10 HD
This version of TWRP works on the Lenovo TB-X505F (wifi). For the TB-X505X, see this thread. For the TB-X605F/L, see this thread. For the TB-X606F/L, see this thread. The X606F/L is the second gen M10 and it uses a Mediatek SOC. #include...
forum.xda-developers.com
Twrp for x505f

Umm where it says to download my os there is no link provided. Same goes for fastbook it takes me tomyour old guide and then there is no link where a person would think they would find it. Am I stupid and missing something or all the links broke/missing ?
I'd prefer to be stupid.... Just saying..

tombaldwin6 said:
Umm where it says to download my os there is no link provided. Same goes for fastbook it takes me tomyour old guide and then there is no link where a person would think they would find it. Am I stupid and missing something or all the links broke/missing ?
I'd prefer to be stupid.... Just saying..
Click to expand...
Click to collapse
Check his new guide, just flash twrp and flash magisk from there

Guys, I am stuck in a Bootloop after i tried that with the patched boot img. Can someone help?

Tamiiiiiii812 said:
Guys, I am stuck in a Bootloop after i tried that with the patched boot img. Can someone help?
Click to expand...
Click to collapse
Download rom, extract boot.img from it and flash it. Makw sure you download the right version.
You can find the rom here:- https://mirrors.lolinet.com/firmware/lenovo/Tab_M10_HD/TB-X505X/

cYBER~VeTeRaN said:
Download rom, extract boot.img from it and flash it. Makw sure you download the right version.
You can find the rom here:- https://mirrors.lolinet.com/firmware/lenovo/Tab_M10_HD/TB-X505X/
Click to expand...
Click to collapse
OMG IT WORKED. Thank you.

Thanks bro. I found what I needed..

Shamil Niyas said:
1. Download the platform tools for your OS from this link.
Click to expand...
Click to collapse
yeah, where is the link?

Booe said:
yeah, where is the link?
Click to expand...
Click to collapse
Just search for platform tools and download it.

Guys, i tried the above mentioned method but my device is showing (can,t load android system. your data my be corrupt. if you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device) after performing a factory data reset the device reboots and the welcome menu shows up after 15-30 seconds the device automatically shut down and again shows the same message (can,t load android system. your data my be corrupt. if you continue to get this message, you may need to perform a factory data reset and erase all user data stored onnn this device). this goes again and again......

Magisk 23 to 24 ruined

Hi!
I had Magisk v23 working fine with Magisk hide but then I upgraded to v24. Magisk app successfully installed and shows Magisk not present. And when I try to DirectInstall Magisk, I get verification failed error. Attached both screenshots.
Now, I have installed and confirm TWRP is working but do not know how to make Magisk working again and it seems it gonna be a wipe. Any help appreciated.

[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
Step by step: Magisk 24.1 is new and as you have seen completely different.
Installation instructions: https://topjohnwu.github.io/Magisk/install.html

Issue is that on my other phone, Sony Xperia XZ Premium G8142, the same in-app upgrade weas successful with out any issues. I lost Magisk Hide but an extension recovered that function. But it all went haywire on this S8

xabu said:
[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
Step by step: Magisk 24.1 is new and as you have seen completely different.
Installation instructions: https://topjohnwu.github.io/Magisk/install.html
Click to expand...
Click to collapse
This guide expects me to know what ROM I have. Thing is, I do not know what my device really is. It's running a ROM that I do not recognize (My post: https://forum.xda-developers.com/t/...l-and-odin-cannot-flash.4372669/post-86069051). I do not have the sources for it so I cannot acquire the required two files. Ramdisk is Yes as per my screenshot but I cannot follow the rest of the guide without the files.

try this
Check hardware and software info Galaxy:
*#12580*369#
Android 9 shows almost certainly a stockrom Pie .

xabu said:
try this
Check hardware and software info Galaxy:
*#12580*369#
Android 9 shows almost certainly a stockrom Pie .
Click to expand...
Click to collapse
I can't seem to get that code run when I dial it. Also, calling doesn't do anything.

Your phone needs twrp and a new good custom ROM ...
HELP! S8 got bricked, can't access recovery mode and OEM is locked
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo . I've tried steps like flashing stock rom, odin...
forum.xda-developers.com
Here are certainly members of the forum with lots of expertise!

Doomer D. Great said:
I can't seem to get that code run when I dial it. Also, calling doesn't do anything.
Click to expand...
Click to collapse
Maybe only European ?

xabu said:
Your phone needs twrp and a new good custom ROM ...
HELP! S8 got bricked, can't access recovery mode and OEM is locked
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo . I've tried steps like flashing stock rom, odin...
forum.xda-developers.com
Here are certainly members of the forum with lots of expertise!
Click to expand...
Click to collapse
I just TWRP it. It went smoothly. I love a new ROM but need to know what device is it.
Download mode say it is SM-G950N
Android say it is SM-950FD
Both SIM slots have the same IMEI number. This part is beyond my understanding.
I have Odin and know the basics. Just need to find a ROM I can go for: What official I should flash first and what custom. Any recommendation?

As soon as you make a TWRP total backup, you can see your boot.img and move a copy to your internal sd-card. There it can be picked up by Magisk and patched....Magisk will put it in your download folder on the internal sd-card ...
for the best Rom ask members with your S8 phone. I'am on the S7 Edge.

xabu said:
Maybe only European ?
Click to expand...
Click to collapse
Doomer D. Great said:
I can't seem to get that code run when I dial it. Also, calling doesn't do anything.
Click to expand...
Click to collapse
Just found out:The "famous" secret codes only work on stock based ROMs ¯\_( ͡❛ ͜ʖ ͡❛)_/¯

xabu said:
As soon as you make a TWRP total backup, you can see your boot.img and move a copy to your internal sd-card. There it can be picked up by Magisk and patched....Magisk will put it in your download folder on the internal sd-card ...
for the best Rom ask members with your S8 phone. I'am on the S7 Edge.
Click to expand...
Click to collapse
I have been trying to make the total backup but I do not see any boot.img:
And I do not see the file in the Device/TWRP/Backups:
Again, I must be missing something obvious. And as per the Magisk guide, I need the boot.img

magisk 24 is ****, it's bricking MediaTek powered Samsung phones

Boot.img from TWRP backup
In clockworkmod kernel and recovery are backed up as IMGs. But in TWRP it is boot.emmc.win Anybody know how to convert jt to boot.img? Help will be really appereciated. Sent from my HTC One X using xda app-developers app
forum.xda-developers.com
I must tell you that my custom rom for the s7 gives me the boot.img as the first file as soon as i open the zip.
the boot.img can also be reached by downloading the right stock rom for your phone. In that case it is the best practice to patch the whole
AP file by using Magisk.