Question Flip to Glyph - LED behavior - Nothing Phone 1

Hi there,
is it possible to change the LED behavior for the "Flip to Glyph" mode?
I really want to see the LED lights flashing like on my "normal ringtone" when in Flip to Glyph mode, but only one LED flashes.
And it would really nice to have a option at the indicator/status menu to change it to on or off.
Thanks in advance,
konqi

It is possible but not recommended if you're not skilled enough.

konquistidator said:
Hi there,
is it possible to change the LED behavior for the "Flip to Glyph" mode?
I really want to see the LED lights flashing like on my "normal ringtone" when in Flip to Glyph mode, but only one LED flashes.
And it would really nice to have a option at the indicator/status menu to change it to on or off.
Thanks in advance,
konqi
Click to expand...
Click to collapse
You're talking about changing the light behavior but sometimes for me when I flip the phone the lights are not blinking!

Pheggas said:
It is possible but not recommended if you're not skilled enough.
Click to expand...
Click to collapse
How to do that?

It has been mentioned. It is not recommended, nor using it.

Pheggas said:
It has been mentioned. It is not recommended, nor using it.
Click to expand...
Click to collapse
I didnt find any threads about it. Can you link it please?

Related

Nexus 4 led not working

Hello
I have been experiencing problems with my phone wherein the led notification is not working. I use an app called lightflow to customize the colors for each notification. However, one day it just stopped working. I tried restarting the device and reinstallin the app to no avail. Please help i dont know what to do. Also i use 4.3 and is rooted
Go to SETTINGS >> DISPLAY and check if you have the Pulse Notification Light set to OFF.
quendil said:
Go to SETTINGS >> DISPLAY and check if you have the Pulse Notification Light set to OFF.
Click to expand...
Click to collapse
Thanks. I feel so dumb to have overlooked that one.
Thabks again
mike_aldwin said:
Thanks. I feel so dumb to have overlooked that one.
Thabks again
Click to expand...
Click to collapse
Hehe no worries.
I had the same problemand after a few hours of troubleshooting i did a hard reset... THEN i remembered that setting!!!

[Tutorial] How to enable the green LED light on a rooted Moto X on boot, in Tasker

Sweet, and now I can make the flashlight work too!
ForSquirel said:
Sweet, and now I can make the flashlight work too!
Click to expand...
Click to collapse
Like using the flash as a flashlight? Gravity box can do this, adds a tile to the quick settings screen in the notification shade.
This app works for flashing the flash led https://play.google.com/store/apps/details?id=com.manzy.flashnotification
Sent from my xt1060vzwDE
fury683 said:
Like using the flash as a flashlight? Gravity box can do this, adds a tile to the quick settings screen in the notification shade.
Click to expand...
Click to collapse
With gravity box you can also enable to torch from long press on lock ring or even from the volume down button, super convenient!
vikramkhalsa said:
With gravity box you can also enable to torch from long press on lock ring or even from the volume down button, super convenient!
Click to expand...
Click to collapse
Where is the setting for volume down torch? I saw the one for lock ring, but I use PIN and it doesn't work for active display lock ring.
fury683 said:
Where is the setting for volume down torch? I saw the one for lock ring, but I use PIN and it doesn't work for active display lock ring.
Click to expand...
Click to collapse
its under hardware key actions.
vikramkhalsa said:
its under hardware key actions.
Click to expand...
Click to collapse
Thanks dude, I was looking at the volume part before, but the "other" part.
It only seems to work from the actual lock screen though. I use PIN and it locks after 15 minutes. If the screen is just off, pressing the VOL down key doesn't do anything. If I turn the screen off and show the lock screen, it works.
I've found even if you slide the ring over to the unlock position and hold it down long enough, it still turns on the torch. Kinda inconvenient in my mind but hey, it's just a side effect of an awesome feature in the first place!
Is there a way to make Tasker have the LED blink? Like blink for charging, and solid for charged?
ragnarokx said:
Is there a way to make Tasker have the LED blink? Like blink for charging, and solid for charged?
Click to expand...
Click to collapse
Nope.
ragnarokx said:
Is there a way to make Tasker have the LED blink? Like blink for charging, and solid for charged?
Click to expand...
Click to collapse
There was an app someone made for that some time ago. It's under the themes and apps section.
Sent from my XT1058 using XDA Free mobile app

Capacitive buttons light

How to turn them off. im on the 4.4.4 Note 4 Port rom. Albe95.
Tried apps but still they light up for some reason and some other methods on xda but they all failed. i hate the lights at the night because they are very bright and i want them to be turned off. great if you help me how to do it
*bump* come on !!!
xDroidZz said:
*bump* come on !!!
Click to expand...
Click to collapse
You could try a different rom. Or you can try an app like this: https://play.google.com/store/apps/details?id=com.haxor&hl=en
It's also a nice way to get your screen even darker.
The only draw back is the status bar notification.
GDReaper said:
You could try a different rom. Or you can try an app like this: https://play.google.com/store/apps/details?id=com.haxor&hl=en
It's also a nice way to get your screen even darker.
The only draw back is the status bar notification.
Click to expand...
Click to collapse
problem solved by turning on power saver mode anyway. but thanks for trying to help me
option B
You can download a hidden menu app from the play store. Then go into the application "engineer mode". There you will find a button to turn the lights for the buttons on & off.
Here are some screenshots of the menu.

Alert slider mapping

I'm currently thinking of a remapping app (remapping as in changing a physical button's output) , but I do not own a oneplus two. Can somebody tell me what the alert slider's keycodes are?
If any of you is willing to help but do not know how to find such info, I attached an apk (that I built from an open source code) to this post. Please install and open the app then change the alert slider state, screenshot the output then send them to me. Also, please state what ROM version you are running.
When the app is finally released to an xda thread, I'll list all the testers there of course.
P.S: The Alert Slider is that new hardware slider that changes sound profiles, in case you didn't already know
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Swatto86 said:
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Click to expand...
Click to collapse
Swapping the "none" profile and "all" profile was exactly what I was thinking.
Can you please tell me what the output of the other states of the slider was?
EDIT:What you actually sent me was the mapping of the back button
is it possible to map it so loud, vibrate and silent
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
That is what I am trying to achieve. If you own a One Plus Two, please download and install the apk and send me the screenshots after you toggle each alert slider state
The app does not do anything when toggling alert slider unfortunately.
Swatto86 said:
The app does not do anything when toggling alert slider unfortunately.
Click to expand...
Click to collapse
Wow, that is a very unexpected result ._. I'll have to look into the source code then.
Thanks a lot everyone
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
morback said:
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Click to expand...
Click to collapse
yakuzlin said:
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Click to expand...
Click to collapse
Kito92 said:
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
Click to expand...
Click to collapse
I thought about having multiple layout options : battery modes;CPU governors; rotation change etc..
However I still haven't found the alert slider mapping file :/ This is becoming quite frustrating
Will have my OPT soon and will do anything I can to help out with this. Think the All/Priority/None options are not useful at all.
its taking a lot of time ...attached img is for priority ..ie key in d middle..
RulerAk said:
its taking a lot of time ...attached img is for priority ..ie key in d middle..
Click to expand...
Click to collapse
Wow, thanks! How about the two other states? none and all ?
For all its f8(not 100% sure) .... It's takin a looot of time n not recording for d other one..... May b cause m not rooted yet
Sent from my ONE A2003 using XDA Free mobile app
I really hope this works. Good luck on this
The one plus two slider doesnt work with keycode's
toonvanstrijp said:
The one plus two slider doesnt work with keycode's
Click to expand...
Click to collapse
Would you happen to know how it behaves?
thetechnologician said:
Would you happen to know how it behaves?
Click to expand...
Click to collapse
Any updates on this ? Very interested
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
I made an app for it. Try play.google.com/store/apps/details?id=com.nqk.vibratemode (sorry, I need to post 10 posts in order to embed the link
You just need to follow the instruction and enjoy the vibration.

Secret notification LED?

Hello there, there are 2 dots on the right of the camera arent those led for notification?? Is that turned off or is that something else? And is there a way to get use for??
No secret LED notification
2gg1 said:
Hello there, there are 2 dots on the right of the camera arent those led for notification?? Is that turned off or is that something else? And is there a way to get use for??
Click to expand...
Click to collapse
Hi there!
No unfortunately this phone doesn't have any secret LED notification light(s), the two dots are for some of the phone's sensors. Nothing more nothing less. I don't believe Samsung would hide something like that from us. Thank you for asking!
AdarshB said:
Hi there!
No unfortunately this phone doesn't have any secret LED notification light(s), the two dots are for some of the phone's sensors. Nothing more nothing less. I don't believe Samsung would hide something like that from us. Thank you for asking!
Click to expand...
Click to collapse
Thank you
AdarshB said:
Hi there!
No unfortunately this phone doesn't have any secret LED notification light(s), the two dots are for some of the phone's sensors. Nothing more nothing less. I don't believe Samsung would hide something like that from us. Thank you for asking!
Click to expand...
Click to collapse
OW also now i know why my phone turn off while calling! Thats because the sensors.
2gg1 said:
OW also now i know why my phone turn off while calling! Thats because the sensors.
Click to expand...
Click to collapse
Yes, that is true!

Categories

Resources