Q&A for [GUIDE][ROOT][RECOVERY][4.4.2] Lenovo A3500-H
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
leripe said:
Try toggling the signature verification off in cwm.
Click to expand...
Click to collapse
Please how can i do this step ???? because i have the same problem
10137
same problem here any solution ?
step 6
Installing recovery :
At step 6 .. When I plug my device .. It do nothing ( only battery charging )
BTW / I have lenovo a3500-hv 4.4.2
So .. Can anyone tell me what's wrong ?..
Thank you ~
rooting issue
the flast tool is struck in the following screen for more than 10 minutes
how to unbrick lenovo a3500 hv
I bought Lenovo a3500 HV a couple of months ago and received 4.4.2 update and updated it but i got a problem rooting on it,so I decided to downgrade it to androoid 4.2.2 using ROM (Inclusive with CWM Recovery and Patched boot.img) at (http://forum.xda-developers.com/android/general/lenovo-a3500hv-root-cwm-flashtool-t2899844) using SP Flash tool v5.1352.01,now my device can not power on and not even show battery on screen when the charger inserted on it, Can you please help me how to unbrick my device. Thank you in advance.
Is there a variant for the A8-50 / A5500-H as I'm thinking of buying one for my Mum but only if it can be rooted?
hello,
i'm trying to root my a3500-fl and i'm stuck at loading the zip in cwm. the problem is, that CWM "can't mount /sdcard/", when clicking on "choose zip from sdcard".
can anyone help??
regards,
adam
me again.... a new "feature" appeared: after rebooting the tab i tried to start CWM again and suddenly the stock-recovery started....
flashed CWM again.
- first boot -> cwm
- second boot -> stock-recovery
why??
Works on lenovo A3500 (A7-50 A3500)
Hello,
I post because I 've tried your process on my new tablet A7-50 (android 4.4.2 kitkat) and it worked fine, thanks you very much to Koli96 but the letter indicated on my tablet, it's not H or HV but L.
If someone else has the same it's cool for them, the process "http://forum.xda-developers.com/android/development/guide-lenovo-a3500-h-t2879208/page2".
Hi !
I did that too for my A3500_FL and it works fine.
However there is a OTA upgrade and the CWM fails to execute it.
What to do, need i to restore Stock recovera (If YES, how to do it ?).
Greetings,
Ender
yes
Hello there for anyone with the lenovo a3500-f this method does work I have successfully installed the cwm and rooted the tablet
need help
can you help me how to root lenovo a3500 - hv? can you attach the software that i need.. please? thanks a lot!
Lenovo A3500-h
Same problem:
At step 6 .. When I plug my device .. It do nothing
error installing super su
I followed the guide step by step it when I try to install super su in download mode it says: installation aborted.
rooting Lenovo A3500H failure
Hi folks,
I followed the procedure but when clicking download in the Smart Phone Flash Tool it goes to "search" and never starts transferring. I have selected Recovery (recovery.img) as required, nothing else.
The tool was started as Administrator on my Windows 8.1 PC.
But i mention one thing: When pressing download a Warning pops up like:
"Not ALL Images are correctly loaded, which may cause boot up issue!
Do you still want to go on downloading anyway?"
As said above, when clicking YES it goes into "search" and nothing happens anymore.
Stop works fine, it does not hang up or such.
The Tablet is recognized on the PC as 3500-H and i can view the data.
I have Android 4.4.2 on the brand new Tablet. Nothing done to it so far.
Who has an idea what goes wrong??
TIA and have a good week.
Hartmut
I just bought an A7-50 A3500-F. Has anybody here been able to upgrade that specific model to Android KitKat 4.4? (I know it works for the A3500-H and A3500-HV, but am wondering about the A3500-F model.)
a3500-fl
Hello i've got a a3500-fl and my tab seem bricked (always black screen) but detected by PC when USB plugged.
i try tu install CWM of this post, but with flashtool nothing appens when i plug the tab...
I've downloaded also the firmware from russian forum...
can someone help me to recover my a3500-FL ?
thanks a lot
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Dear Experts, Please help!
android_sriniram said:
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Click to expand...
Click to collapse
There may be two things which may be done
1. Since you've done factory reset The first boot may take some time so wait for 20min and make sure it's working
2. If it's not working yet . Then the recovery file you've have flashed is wrong or you've flashed in the wrong partition . There is also chance that you've interupted the process.
These flashing tools are somewhat complicated I've faced many problems because if any settings weren't set correctly then it would mess all your mobile and also the version you use is very important..
So, contact the developers who are working for the specified mobile for more help. Because they would have over come these issues .
Suggestion:- Never Experiment the odin on your mobile without knowing the every detail before
I am an Yu Yureka user starting March, 2015. I have waited 2 years to get the Marshmallow update through OTG before getting root. But this new update is full of glitches such as
1. When my phone is switched off and charging no percentage of charge completion is shown.
2. When pictures taken in HDR mode, camera screen turns green and stay like that until the phone is restarted. Also the picture quality degraded.
3. This new update takes away the advanced reboot option which was under the Developer Options( in Lollipop), so there is no way to go into recovery mode without connecting phone to pc through usb.
Now coming to the main part,
4. There is nothing that can root my phone. Starting from phone applications to pc applications nothing can root it.:crying:
5. So I tried the cmd Process by using command window through PC by unlocking my Bootloader first, after that I installed TWRP.
6. When the above processes were successful, I transferred the Supersu Zip file in the internal and external of my phone and then executed them from TWRP. Surprisingly it was also successful.:good:
7. Now when I turned my phone on and checked with 2 different root checker apps, my phone was still not rooted.:crying:
8. Then I probably tried the Supersu installation more than 10 times, factory reset it more than I can even remember but still nothing.
9. My phone developed a new problem that is it randomly reboots itself.:crying:
If anyone knows any solution to the above problems, specially on how to successfully root my Yu Yureka, plz help me. I lost all my hope and confidence.
Thank You for taking your time and reading this.
I don't know if u have done stuffs properly....so here's the thing...IF U R RUNNING LOLLIPOP OR ABOVE!!!!!! then------------
1. Download latest TWRP from the official site and flash it
2. Flash any latest nougat based roms like ---- lineage os, official RR, aosp extended etc. (there r so much astonishingly beautiful roms and i can't name all of them....please don't mind devs )
X. Flash GApps if you want to from here : opengapps.org (arm64,7.1.x,pico variant)
3. Very imp. for you !!!!!!Flash magisk (latest v13.3) from here : (tiny.cc/latestmagisk) and flash it
P.S. Lineage might not support magisk so you have flash there supersu addon which can be found on their official website (in device tree on the left side search for "extras" on the very last option)
Hit Thanks Button if I helped you
yureka plus not getting detected in pc
hey i too have the same problem but one more is that i cannot connect it to pc its just charge my phone unable to connect it and if i connect it in switched off position it just act as is its charging for a second and stop yu boots abd again it charge and yu boots
Need some input to downgraded from marshmallow to official lollipop for YU Yureka...
I am facing the some issues like automatic restart for yu yureka due tounstable Marshmallow update. Can you please share the steps to downgraded to official update like lollipop.
Hi everyone, I'm Emanuel, I'm 27 and I like to install custom roms since I had my first android 2.3! now I have a problem with my Samsung Galaxy J5 (2015) which has a Samsung rom with Android 8.0 it seems to me installed by me long ago, until a week ago it worked, now I tried to go to recovery mode but the phone went into FRP protection and no longer comes out, I can go to download mode, but with the USB cable in the PC it does not recognize the device, I tried to solve this problem but I can't, I uninstalled the drivers from the PC, I reinstalled it, I did everything but does not connect to the PC, and does not even enter recovery mode
guys i have a little problem with my samsung s10 +..
i wanted my smartphone unroot and flashed the original firmware with odin, initially the android 10 version,
unfortunately after the flash the display came after the start "erase" and android always shows a black screen afterwards....
Had tried it with the android 11 version but unfortunately the same result....
I get into the download mode and recovery mode but android just doesn't start in the operating system and I wonder why.
does any of you have a solution for it?
mhhh nobody?
Do you have the same problem as I described here
Samsung S10 + bootloop ERASE FAIL: READ ONLY
Samsung S10 + SM-F975F/DS IMEI stating Taiwan (Update: Very contradicting information if the phone is Snapdragon OR Exynos) if it even matters to solve the issue I dont know Owner of the above since 2019 without issues; USB debugging mode...
forum.xda-developers.com
So far I had no luck finding someone
still no one here to find the solution