Hi i purchased this unit https://www.aliexpress.com/item/[email protected]!!im
for my 2009 VW Multivan, The unit has the PX5 Software with Android 10 and i can't make it to display car information on the head unit, the steering wheel buttons are working fine also when i turn on the car lights, the unit also light's the buttons, meaning there is a CAN communication but i can't make it read information as doors, voltage, AC, etc.
I tried all the VW profiles at factory settings with no luck. Are there any suggestions of how to solve it?
Thanks
yprat said:
Hi i purchased this unit https://www.aliexpress.com/item/[email protected]!USD!US $512.18!US [email protected]!!im
for my 2009 VW Multivan, The unit has the PX5 Software with Android 10 and i can't make it to display car information on the head unit, the steering wheel buttons are working fine also when i turn on the car lights, the unit also light's the buttons, meaning there is a CAN communication but i can't make it read information as doors, voltage, AC, etc.
I tried all the VW profiles at factory settings with no luck. Are there any suggestions of how to solve it?
Thanks
Click to expand...
Click to collapse
Sorry to say, but who told you that the car functions would work?
If I read the text at Ali, there is no single word written about car functions.
That what they offer is working... your steering wheel... nothing else did they offer...
rigattoni said:
Sorry to say, but who told you that the car functions would work?
If I read the text at Ali, there is no single word written about car functions.
That what they offer is working... your steering wheel... nothing else did they offer...
Click to expand...
Click to collapse
Ok i see, would these functions work with a different canbus decoder?
yprat said:
Ok i see, would these functions work with a different canbus decoder?
Click to expand...
Click to collapse
In most cases the firmware needs to be developed to show the information as an overlay or pop up message.
May be there is someone here who has a VW which shows the information on the screen and you both can compare the content of the firmware and may be you are able to use another firmware from Joying on your unit.
I´m out here, because I don´t have a VW.
By the way...
As this unit is a PX5, you may be wrong in this forum.... May be post a picture of the "About Tablet" where we can see the MCU version of your unit.
rigattoni said:
By the way...
As this unit is a PX5, you may be wrong in this forum.... May be post a picture of the "About Tablet" where we can see the MCU version of your unit.
Click to expand...
Click to collapse
I'll do it later today
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not FYT, requested moderator moves to Android Head-Units forum
@yprat
Well... I think you have one of these units you can´t change a lot.
There are some threads already open in this forum, so try to search for MF1-px5
Nothing I can support with this kind of unit.
Related
I have installed an Andriod 4.2.2 Head unit in my 2013 dodge challenger, this is a unbranded unit,
I have been trying to get my SWC to work.
I can enter a "Factory settings menu" with the Password "126" this allowed me to change logo etc.
there are many options under canbus settings in this menu under "Applications"
Mine is currently set to jeep (union) there are other options ie jeep hiworld , Chrysler and many others.
I have searched for posts that explain these menu,s with no success.
My handbrake canbus radio interface works OK but not the SWC.
can I do any harm trying other settings?
The supplier of the radio just tells me to hook up key1 and key 2 wire and ground, however my radio installer
tells me these are only for resistive touch buttons.
The unit was supplied and installed with a canbus adaptor.
Can anyone help me or point me to a thread that explains this.
Thanks Mike
Its a HuiFei type unit (its not unbranded - there are about 10 brands), read the HuiFei thread.
Most steering controls work by sending a certain voltage down the wire that your head unit interprets. Like 160 mhz is play/pause while 190 mhz is volume up. (those numbers arent accurate, but you should get the jist). This type of controls is a direct analog type and what the chinese units use to intrepret your control data.
Some cars,I'm guessing yours is one of them, use a digital signal that can't be interpreted by the analog wires that come from harness. You'd need an SWC interface as a go between for your car and HU.
KingLo said:
Most steering controls work by sending a certain voltage down the wire that your head unit interprets. Like 160 mhz is play/pause while 190 mhz is volume up. (those numbers arent accurate, but you should get the jist). This type of controls is a direct analog type and what the chinese units use to intrepret your control data.
Some cars,I'm guessing yours is one of them, use a digital signal that can't be interpreted by the analog wires that come from harness. You'd need an SWC interface as a go between for your car and HU.
Click to expand...
Click to collapse
Or a CAN Bus adapter from the manufacturer of his unit. but as I said earlier all the info he needs is in the HuiFei thread . . .
Re Headunit
Thanks guys, so as I interpret this I need a further adaptor additional to the canbus adaptor supplied by the head unit manufacturer.
I would still be interested in finding an explaination of the factory settings menu ,the one you need the password to enter, as I can not find a post on this?
Hi everyone, I need help with my HU. I followed the factory guidance to set up the wiring and installation but my camera lines appears 90 degrees (from the left) instead of the center. I have tried mirroring, no luck. Please see picture. Can someone help me please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello!
I have a very strange problem with my android radio in my 508. When I'm trying to connect it with delivered canbus decoder, it's simply not powering on. I tried various combinations with power supply to the unit but without positive result yet. The only way that turns my radio on is bypassing power supply of canbus box and conecting it directly to power in on the unit. I thought that maybe canbus decoder is defective, so I returned it to supplier and received new one...still no success. I have red many manuals and forums but I cannot find the answer how to power on the unit with canbus decoder. I really need it to be connected because I need steering wheel buttons and readings from car computer (like AC, fuel consumption etc.). I know that to maintain it, power supply must be connected to canbus decoder, which triggers signal to power on the unit. Somehow it just doesn't work. I measured voltage on power harness, there is a good reading. I have also readings on canL and canH line. Everything is good on input side to canbus, on output I have zero...just like canbus is not working.
My radio is 1din android 8 unit equipped with canbus decoder:
decoder: MH (PA-SS-05)20180402
SS-PA0503271018-2
For: Peugeot 2008
P/N 1801300412
Software: PSA V2.27 005BYPS
Unit: MCU version: MTCE_MX2_V2.83_1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please guys help me out because I am fighting with this chinese **** almost 2 weeks now
Hi,
I know it's a long time since your post, but I just installed an Android Head unit in my Peugeot 508 with JBL Sound, and the decoder I received was one for Peugeot 407, maybe that's why it's not working?
Also I cannot see your photos, they are most likely not online anymore.
Android radio
Hi
Did you find a solution for this issue.
Best regards
Eq5545
Hi,
I would like to install an Android head unit to replace the Swing car radio in my Skoda Octavia 2.
I hesitate between 3 models:
-LJHANG PX6 7" 4/32Go is PX6 a good choice compared PX5 ?
-ZNY PX5 8" 4/32Go PX5 but 8" screen
-SilverStrong PX5 8" 4/32Go with DSP , is DSP a good value ?
Thank you for your help.
After some reading online I choosed Eunavi-WG9018S model, you can find it on AliExpress.
I'm using it for almost a month now and it's plug and play with integrated canbus which works very good - a lot of car system information displayed + steering wheel controls and OEM parking sensors.
GPS is very accurate, I left the antenna in the dashboard behind the unit and no problem with the signal.
Audio is OK, I used mostly with Spotify and the sound is OK. Being Android we have a lot of option in matter of players and equilazers.
PS: I own an Passat B7, but both your and mine are VAG cars so the wiring is similar.
Hi,
On sunday i installed on my Octavia 2 an Isudar NA02A53VW0907 (PX5 4/43GB 9'' ) on Aliexpress store (11/11 Sale).
previously i own an Ownice C200, until this summer when the unit stop working, some overheat problem..
Base only on experience of these days, it's miles better than Ownice..
I need to find some calibration for colour, it's washed..
Carlos
aurelv said:
After some reading online I choosed Eunavi-WG9018S model, you can find it on AliExpress.
I'm using it for almost a month now and it's plug and play with integrated canbus which works very good - a lot of car system information displayed + steering wheel controls and OEM parking sensors.
GPS is very accurate, I left the antenna in the dashboard behind the unit and no problem with the signal.
Audio is OK, I used mostly with Spotify and the sound is OK. Being Android we have a lot of option in matter of players and equilazers.
PS: I own an Passat B7, but both your and mine are VAG cars so the wiring is similar.
Click to expand...
Click to collapse
Hello,
I join your thread for my Skoda Yeti 2015.
@ludz179: did you find a head unit?
@aurelv: I'm interested by your Eunavi-WG9018S model. Did you confirm that all is working fine (OEM reverse sensor, steering wheel controls...)?
I have some other questions:
- did you know if FastBoot is supported?
- I don't see if SDcard slot is on front?
- what do you think about the quality of the screen (reflection, brightness ...)?
- how does it fit into the dashboard? Would you have a picture?
- do you face particular problems (bug, overheating, crash, reboot)?
Did you confirm that you have not added anything in the connectivity between the original socket and the one provided with the Eunavi?
I have this socket:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the answers you could give me.
If anyone has a comment, you're welcome!
Thank you all.
Julien
French user
Hello, I bought the product aliexpress. I have andorid 7.1 px3 headunit in my car. When I insert the device from the usb, the memory in it opens and I install the apk. But Tmps on the screen gives the error that could not be connected. when I try the same usb tpms device with the same way to andorid 6.0 headunit It works directly . Do I have a point I missed? Could you help?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have the same problem. My power light on the WiFi receiver flashes
Charmie86 said:
I have the same problem. My power light on the WiFi receiver flashes
Click to expand...
Click to collapse
Did you find any solution?
Hi! I have the same problem with TPMS device USB connectivity with Android multimedia head unit. I tried everything, but so far no result.
Did you find any solution?
Hi! I have exact the same product and i see exact the same pictures, that means I have the same issue on my head unit PX6 with Android 11. I also updated the app to the newer version without any result. Any idea someone?
Hi, I didn't solve the issue. I have tried TPMS on two other car Android multimedia with Android 6 and 7 versions, but without any success.
Do you guys own the TPMS from the head unit seller?
If not there is most probably the issue.
There are wo many aftermarket TPMS... and the head unit supplier just implements their own stuff. Also OEM TPMS are mostly not supported.
TPMS is not from the head unit seller. Supposedly it should work with Android car aftermarket multimedia, but it seems that's not the case.
vlajko45 said:
TPMS is not from the head unit seller. Supposedly it should work with Android car aftermarket multimedia, but it seems that's not the case.
Click to expand...
Click to collapse
Exactly!
If I have a look at the provided pictures... It seems to be clear: The TPMS on the wheels are not connected. They need to get activated wheel by wheel.
So go through the settings of this app and try to get them activated. Ask the reseller how to activate if that is not written anywhere. If this is not possible: Send them back and get your money back.
rigattoni said:
If I have a look at the provided pictures... It seems to be clear: The TPMS on the wheels are not connected. They need to get activated wheel by wheel.
So go through the settings of this app and try to get them activated. Ask the reseller how to activate if that is not written anywhere. If this is not possible: Send them back and get your money back.
Click to expand...
Click to collapse
Sorry, byt this is not correct. I 've tried everything, but the problem is not the avtivation of the sensors. The usb receiver can not be recognized by the HU. The app runs, you can choose the wheel sensor to connect, but nothing happens. The power light on the receiver flashes as before, and nothing more. Thanks anyway!
Hello! I just recently installed this headunit on my bmw, I have browsed this forum for a few hours just trying to figure out more information on it, I have found myself in a never ending loop, The roms, mcu's, etc. I am utterly lost on trying to figure out more. It works great! and I love it so far, I managed to update the MCU Version the other day, not sure if that is able to tell anyone anything either, The one I had installed was: "Ksw-Q-Userdebug_OS_v3.6.5-ota" I at least think that is an MCU version, regardless I had installed it and it worked well, updated ZLINK and also seemed to help the bluetooth a good bit, I'm now able to connect effortlessly, and immediately launches Carplay and its near flawless minus the slight 1-2 Second lag (As expected for bluetooth) I am curious to see what all you guys can talk me through so I can either better understand my headunit or even show me. Id love to learn about a few roms people have been using and what exactly the benefits are to the one I am using, A popular thing brought up is "Rooting" What benefits would rooting my headunit bring? If there is any. And also I am having issues trying to connect bluetooth to my obd reader, I am able to actively pair it (Enter the pincode) and after that, it refuses to connect regardless how many times I press connect, it seems to just not do anything, I am attempting to use it to monitor AFR, Boost, EGT's Oil pressure/Temp, etc through bm3 I had even went and bought a enet to usb adapter and tried plugging it into my headunit obd port but alas, It was not working regardless, It isn't able to read vehicle vin information etc. Absolutely ANY information regarding my system either capabilities, Roms I should try, what exactly an MCU is, etc is appreciated. Below I have attached my Unit link on amazon, aswell as system information. Thank you! Zack
Product Link:
Amazon.com: Koason Android 10.25 inch HD1920 Screen Display Monitor 4G LTE Multimedia Player GPS Navigation for BMW F20/F21/F23/F30/ F31/F32/F33/F34/F36/F80/F82/F83/F84 NBT : Electronics
Amazon.com: Koason Android 10.25 inch HD1920 Screen Display Monitor 4G LTE Multimedia Player GPS Navigation for BMW F20/F21/F23/F30/ F31/F32/F33/F34/F36/F80/F82/F83/F84 NBT : Electronics
www.amazon.com
Car Information:
2015 M235I NBT with Bluetooth Package
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not MTCD, requested moderator move to (Android head-units) forum.
Op try searching forums with MCU suffix and using punctuation, and new lines.
This headunit looks to be an oddball. Good luck.