Related
Hey guys,
finally i bricked my phone...
After a failed flash to TWRP recovery and a failed unbrick with fastboot, the phone won't start. Blackscreen. Only in device manager it show's "Qualcomm HS-USB QDLoader 9008". Is there any chance to unbrick or should i get a new mainboard?
PS: Sorry for my bad english, im from Germany
Thank you in advance
JaDa
@JaDaKiZz welcome to the party - read this http://www.reddit.com/r/lgg2/comments/2p5xei/the_lg_g2_is_unbrickable_a_story_of_death_and/ and let me know if you need any help. The MOST IMPORTANT thing you need to do is figure out the right KDZ for your phone.
Use http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxxxxxxxxxxxxxx
replace xxxxxxxxxxxxxxx with your IMEI
Hey sandys,
the BoardDiag start but abort the test.
Linux don't show my G2 in devices. What can I do?
JaDa
Same thing happened to my phone. Thats what it shows in windows and isnt picked up by ubuntu. When I tried to use the lg tool to recovery it fails and says phone isnt in dload mode trying flash programmer. Dont have the money currently for @tungkick and dont see any other way.
Yesterday when I updating my Asus zenfone max Z010D my phone hard brick. Nothing show, not indicating led, not charging, not going to bootloader.not going to recovery. The main thing is that I download ota updates zip from Asus website and flash from stock recovery. When I connect zenfone max to PC, in device manager show qualcomm hs-usb qdloader 9008 driver. And when I google, then I known that I need service ROM which can flashed through Qfil tool.
So, can you give me service ROM so that I fixed this problem.
Please not this is not battery problem. Its os problem. Sorry for my bad English and thanks.
sorry
im not an expert but im using zenphone max sd615 model so i just try to install custom rom on my device i just switch off my device through twrp and its turn off for ever not turning on not charging no led indicates nothing
Christy2375 said:
im not an expert but im using zenphone max sd615 model so i just try to install custom rom on my device i just switch off my device through twrp and its turn off for ever not turning on not charging no led indicates nothing
Click to expand...
Click to collapse
That is the offline charging bug caused by the hardware's reverse charging feature. No solution to date so be careful to not let the battery go below 20% without charging.
Reboot into Fastboot / CSC mode ( vol up + power) and plug the charger. Let it charge for 10-15 mins then reboot.
sir please help me i have already a reverse charging popup problem i try to change the os to solve the bug please any other option
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
MJMarra34 said:
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
Click to expand...
Click to collapse
Where do you get the right files? Could you post them?
Hi guys, I'm in really trouble.
I've got an Asus z010d and I think is hardbricked.
Screen is totally black, no vibrations, no recovery mode, nothing.
The only thing that I've done is to see it via QFIL like the image attached.
I've read some guides around the internet, for restore the device via QFIL with a stock rom, but I not able to get a single rom that has rawprogram0.xml and patch0.xml files that the program need...
I state that I am not a big expert.
Iif anyone knows how to help me, I can also pay him for the right assistance.
Thanks in advance.
So, I side loaded build no. 13.8.26.76 to my phone, not knowing that it was meant only for the snapdragon 410 counterpart (mine is 615 one). It installed successfully until I rebooted and phone stayed dead. I think I hard bricked it
No logo, no charging, can't enter recovery or fastboot. No nothing... Connected device to PC, and windows doesn't recognize it.
Please help me....
sree27 said:
So, I side loaded build no. 13.8.26.76 to my phone, not knowing that it was meant only for the snapdragon 410 counterpart (mine is 615 one). It installed successfully until I rebooted and phone stayed dead. I think I hard bricked it
No logo, no charging, can't enter recovery or fastboot. No nothing... Connected device to PC, and windows doesn't recognize it.
Please help me....
Click to expand...
Click to collapse
Can you go to recovery mode ?? If yes please flash your device compatibility custom rom like RR rom ..if u cant go to even recovery mode..
RIP asus zenfone max Just Change your Motherboard of your phone
Thanks
Its dead u can recover i also had same issue ...mine works now ....email me [email protected]
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
MJMarra34 said:
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
Click to expand...
Click to collapse
Check my post for detailed instructions. And yes, I did face that issue and fixed it by reinserting the battery. It's a bit risky, but worth a try. Try watching some YouTube teardown videos
sree27 said:
Check my post for detailed instructions. And yes, I did face that issue and fixed it by reinserting the battery. It's a bit risky, but worth a try. Try watching some YouTube teardown videos
Click to expand...
Click to collapse
Oh Great! do you have a link of your instructions man? thank you! so I really have to dissassemble the phone?
MJMarra34 said:
Oh Great! do you have a link of your instructions man? thank you! so I really have to dissassemble the phone?
Click to expand...
Click to collapse
It's on my profile. I haven't mentioned the disassembly part since it was not required in general cases. Check my profile for the detailed instructions
Hey Man. I'm currently working on my phone. I already tried removing the battery but I'm still getting the error:
Download Fail: Switch to EDL Fail.
hopes are going narrow. Now I don't know what to do.
MJMarra34 said:
Hey Man. I'm currently working on my phone. I already tried removing the battery but I'm still getting the error:
Download Fail: Switch to EDL Fail.
hopes are going narrow. Now I don't know what to do.
Click to expand...
Click to collapse
Are you on fastboot mode? What is on your display?
Im still at the part with the QFIL. Im retrying it right now bruh.. hmmm
MJMarra34 said:
Im still at the part with the QFIL. Im retrying it right now bruh.. hmmm
Click to expand...
Click to collapse
If you're having trouble with QFIL, best thing to do is uninstall Qualcomm drivers, reboot, reinstall, try again. Repeat until you can flash without problem.
I had to uninstall many times. Don't lose hope. It takes a lot of effort
hey Sree. I noticed that it is being detected as Qualcomm HS-USB diagnostics 9006. So what I did is I forced driver to install Qualcomm HS-USB QDLoader 9008. I'm now having a Sahara error. I'll try reinstalling drivers but I have a quastion. Does QFIL version matter ?
MJMarra34 said:
hey Sree. I noticed that it is being detected as Qualcomm HS-USB diagnostics 9006. So what I did is I forced driver to install Qualcomm HS-USB QDLoader 9008. I'm now having a Sahara error. I'll try reinstalling drivers but I have a quastion. Does QFIL version matter ?
Click to expand...
Click to collapse
I don't know. I used the latest one. Try the version linked in my original post. Also, of you're getting sahara fail, it's ok. You're on right track. Uninstall driver, reboot and reinstall. It'll take hell a lot of tries, but will work eventually
zenfone max not working.no boot loader(no csc mode),no recovery mode,no logo&display
my asus zenfone max is not switching on after installing one fake stockrom with sp flash tool.now its showing no display,no bootloader,no csc mode,no recovery mode,no logo nd nothing,even not showing as it is charging.
only showing in qualcomm snapdragon tool .as 9008
my mobile processor is qualcomm snapdragon 415......2gb ram nd 16gbrom version.
please help me with qualcomm fllashing files and process guide.
even in service centers they are not responding properly
GOPI9866 said:
my asus zenfone max is not switching on after installing one fake stockrom with sp flash tool.now its showing no display,no bootloader,no csc mode,no recovery mode,no logo nd nothing,even not showing as it is charging.
only showing in qualcomm snapdragon tool .as 9008
my mobile processor is qualcomm snapdragon 415......2gb ram nd 16gbrom version.
please help me with qualcomm fllashing files and process guide.
even in service centers they are not responding properly
Click to expand...
Click to collapse
When u connect to pc , does it show as "HS-USB QDLoader 9008" check ports in device manager.
yeah its showing dear
jide1 said:
When u connect to pc , does it show as "HS-USB QDLoader 9008" check ports in device manager.
Click to expand...
Click to collapse
yes its showing dear
GOPI9866 said:
yes its showing dear
Click to expand...
Click to collapse
Send me a private message on the forum.
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
i attempted to root my zte maven 3 with zpst for at&t and when the device went to restart the screen stayed black and no matter what key combinations i try i cannot get the screen to turn on. The only thing the phone does is connect to the pc and makes that connection noise. it connects as Qualcomm HS-USB QDLoader 9008. does anyone have any advice or suggestions that might help
Did you make any partition backups in QFIL by any chance? If not, I have no idea how one would go about fixing it. What's your bootloader version? I can try to give you my partition backups and you can try flashing it and seeing if it'll boot.
Tbh I should write my own rooting guide, because the existing methods are, quite frankly, ****ty and dangerous. To anyone reading this, please open QFIL and make a backup of all of your device partitions before messing with anything; this is basically creating a bit-for-bit backup of the storage itself, such as the persist partition, userdata, system, etc. I had to buy a for-parts Maven 3 from eBay because I bricked my Maven 3 using the same guide...
And don't use ZPST from now on. You don't need it. Everything can literally be flashed as a partition in QFIL easily. This is how I safely flashed a Magisk boot image (partition) and half-working TWRP recovery partition.
maxwelldad90 said:
i attempted to root my zte maven 3 with zpst for at&t and when the device went to restart the screen stayed black and no matter what key combinations i try i cannot get the screen to turn on. The only thing the phone does is connect to the pc and makes that connection noise. it connects as Qualcomm HS-USB QDLoader 9008. does anyone have any advice or suggestions that might help
Click to expand...
Click to collapse
Your device is in EDL mode. It's the only mode that connects as Qualcomm HS-USB QDLoader 9008, and EDL mode doesn't display anything on your device screen. Just take the battery out for a second and you should be able to boot normally.
I'm going to post a new thread in this forum as soon as I send this, where I'll run down the steps I took to achieve root on my Maven 3 just this morning. I've powered off and booted up about 5 times since rooting and it's still rooted.
I have edl mode no boot no screen no lights, what do do next. I tried removing battery no luck
xecutionkrk said:
I have edl mode no boot no screen no lights, what do do next. I tried removing battery no luck
Click to expand...
Click to collapse
I am unsure of what you can do because iirc i faced the same issue. I have full partition dumps for my current maven 3, some of which (except for example persist) I can send and you can try flashing it using QFIL since your device sounds like it's in EDL mode