Related
hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!
try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.
if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
Install a ROM with marshmellow firmware please don't post in this thread of j5 forum
hi, already posted by mistake at firmware section admins can delete that please...
having TOTALLY erased my SM-J500F/DS with TWRP I cannot put back anything...
ANY help on stock recovery, custom rom or anything would be greatly appreciated... I tried already one custom rom but I am not sure... just install the zip file? This procedure doesn't boot, restarts gets the logo and after this the screed gets yellowish like damaged!!!... again I have TWRP access thankfully...
please any help?
gsp1 said:
hi, already posted by mistake at firmware section admins can delete that please...
having TOTALLY erased my SM-J500F/DS with TWRP I cannot put back anything...
ANY help on stock recovery, custom rom or anything would be greatly appreciated... I tried already one custom rom but I am not sure... just install the zip file? This procedure doesn't boot, restarts gets the logo and after this the screed gets yellowish like damaged!!!... again I have TWRP access thankfully...
please any help?
Click to expand...
Click to collapse
You must go to section Samsung j5 2015 you will find all you need, since restoring to stock, rooting, installing the correct TWRP for your device....and more.
You NEED to READ because too much information for one post, but this is the correct place for you.
Pay attention the correct files TWRP for 601 because there are TWRP for lollipop devices, and when choosing ROMs you MUST downgrade your firmware to Lollipop, that's the reason for artifacts and greenish screen because of incompatibility of TWRP and there are ROMs that you can install with twrp601, others need booltloader and twrp lollipop. Hope you are nota blind anymore
Taivotat2 said:
You must go to section Samsung j5 2015 you will find all you need, since restoring to stock, rooting, installing the correct TWRP for your device....and more.
You NEED to READ because too much information for one post, but this is the correct place for you.
Click to expand...
Click to collapse
Many thanks! I will do it!
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
I had the same problem when flashing Lineage 14.1 on my phone (J500M), screen fadding with a green-yellowish color and no boot. That happened because I was trying to flash the custon Rom with the wrong base. I was using 6.0 before flashing and Lineage requires you start from 5.1.
All I need to do was search for my device on sammobile.com , get the right stock firmware and use Odin to flash the rom on my device. From there I was able to flash TWRP again and install Lineage correctly.
gsp1 said:
Hi to all,
had root this device on 6.0.1 with TWRP. Now I needed a full reset due to a Bluetooth problem to check if its root/software related. BUT on my mistake I erased EVERYTHING through TWRP (Dalvik/ART Cahe,System,Data,Internal Storage,Cache, Micro SD, Android Secure, USB-OTG)
Tried to install custom rom Aospextended but I don't know the how to and I am lost in forums.. the phone doesn't boot... after zip file installation the screen fades to somewhat yellowish like LCD problem... I can still access TWRP..
p.s. I am an iPhone guy and just tried to fix this for my son... hope for your understanding for probably asking something very common..!
ANY HELP WOULD BE greatly appreciated even to get back to stock rom
Many thanks in advance!
Click to expand...
Click to collapse
You have two solutions, you can restore your phone STOCK ROM with Samsung Smart Switch or downgrade to Lollypop firmware and install any custom rom trough TWRP.
Restore to STOCK:
Use Samsung Smart Switch, see howto here
Downgrade to Lollipop:
Install only Bootloader/Modem [6.0.1/5.1.1]BOOTLOADER AND MODEM FOR J500xx [Downgrade more easy] (Collection)
Downgrade to Lollypop (full ROM) (Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Also take a look at [GALAXY J5] Basic informations | Guides | Tips and Tricks | ROMS & KERNELS
DDkin said:
I had the same problem when flashing Lineage 14.1 on my phone (J500M), screen fadding with a green-yellowish color and no boot. That happened because I was trying to flash the custon Rom with the wrong base. I was using 6.0 before flashing and Lineage requires you start from 5.1.
All I need to do was search for my device on sammobile.com , get the right stock firmware and use Odin to flash the rom on my device. From there I was able to flash TWRP again and install Lineage correctly.
Click to expand...
Click to collapse
American_Jesus said:
You have two solutions, you can restore your phone STOCK ROM with Samsung Smart Switch or downgrade to Lollypop firmware and install any custom rom trough TWRP.
Restore to STOCK:
Use Samsung Smart Switch, see howto here
Downgrade to Lollipop:
Install only Bootloader/Modem [6.0.1/5.1.1]BOOTLOADER AND MODEM FOR J500xx [Downgrade more easy] (Collection)
Downgrade to Lollypop (full ROM) (Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Also take a look at [GALAXY J5] Basic informations | Guides | Tips and Tricks | ROMS & KERNELS
Click to expand...
Click to collapse
MANY THANKS to both of you guys!
Bro just install the official rom ,u can download it from the official site and flash with odin ..
I was about to give up and go back to stock but lo and behold I got ahold of a link to a really nice GSI for our Honor 7x devices, and any other device with the Hi6250 chipset. It has worked flawlessly on my BND-L24 and doesn't give me weird uncertified device and internal storage errors like the treble GSI found in the treble ROM forums.
Download link (2nd time just in case) - https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-dotos-8-1-huawei-hi6250-t3793970
Open GApps (I use Pico) - https://opengapps.org
Treble GSIs (Why not) - https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Latest Magisk (Beta for fixed bugs and whatnot) - https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Installation instructions -
crayonicle said:
I assume you have this TWRP installed, if not, install it: TWRP
Alright, let's install.
1. Boot into TWRP
2. Go to wipe - advanced wipe
3. Wipe all but SD card
3. Then go back to wipe.
4. There is an option next to advanced wipe, forgot what it was. (I think it was "Format Data")
5. Tap that option and type "yes"
6. Reboot back into TWRP
7. Flash the ROM and flash Open GApps right after flashing the ROM (I used Pico Open GApps)
8. Do a factory reset, wipe Cache, Dalvik / ART cache, and Data in advanced wipe just to be sure.
9. Reboot
Click to expand...
Click to collapse
EDIT: I'm no longer on this ROM so if there are bugs and you want me to reproduce them, I can not help you. Sorry, I need a more stable ROM for our Honor 7x's than this one. Thanks for understanding.
It's not the best idea to wipe with TWRP. It's better to do it with stock recovery or manually with fastboot.
Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!
flashing this i hope the battery sot is good
Thanks for pointing this Rom out crayonicle, just flashed it and it's freaking great!!
jmoss1972 said:
Thanks for pointing this Rom out crayonicle, just flashed it and it's freaking great!!
Click to expand...
Click to collapse
Well until i flashed magisk and now all i get after flashing the rom is stock recovery
imHadees said:
It's not the best idea to wipe with TWRP. It's better to do it with stock recovery or manually with fastboot.
Click to expand...
Click to collapse
Yeah, you're right, I could end up messing up partitions and whatnot...
But I'm known for being careless ¯\_(ツ)_/¯
DaRkLinK_35 said:
Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!
Click to expand...
Click to collapse
Yes, this ROM will run on your device!
Well, I didn't make this ROM at all, I'm just here to share it...
I already showed you the steps, read the original post!
You must be on EMUI 8 or you will brick your device!
jmoss1972 said:
Well until i flashed magisk and now all i get after flashing the rom is stock recovery
Click to expand...
Click to collapse
Did you flash the latest Magisk Beta?
Usually that is the one that works, or you can find a treble-compatible version of Magisk to flash.
crayonicle said:
Did you flash the latest Magisk Beta?
Usually that is the one that works, or you can find a treble-compatible version of Magisk to flash.
Click to expand...
Click to collapse
Yes I flashed the 16.4, not sure what happened. I can get into twrp, tried wiping and flashing the DotOs image again but all it does is boot into Huawei recovery. When I get home I will try downloading the stock firmware from the MT website and if I can get it to boot up Ill try flashing DotOs again.
jmoss1972 said:
Yes I flashed the 16.4, not sure what happened. I can get into twrp, tried wiping and flashing the DotOs image again but all it does is boot into Huawei recovery. When I get home I will try downloading the stock firmware from the MT website and if I can get it to boot up Ill try flashing DotOs again.
Click to expand...
Click to collapse
Hmmmm... I flashed Magisk fine here...
Hope you get it working again :good:
crayonicle said:
Hmmmm... I flashed Magisk fine here...
Hope you get it working again :good:
Click to expand...
Click to collapse
How's it compared to lineage 15.1? How's battery life? Post few screenshots and check whether substratum works or not? TIA
Tried flashing gapps linked and get an error about gapps isnt compatible. Tried flashing 8.0, 8.1 and 7.1.2 gapps and none work.
Hell yeah got the phone operational again, time to get back to flashing.
Username.php said:
How's it compared to lineage 15.1? How's battery life? Post few screenshots and check whether substratum works or not? TIA
Click to expand...
Click to collapse
More features than Lineage and the SOT seems to be higher
Substratum only works with Magisk or other root installed
Screenshots: Google Drive link
tlxxxsracer said:
Tried flashing gapps linked and get an error about gapps isnt compatible. Tried flashing 8.0, 8.1 and 7.1.2 gapps and none work.
Click to expand...
Click to collapse
Most likely there is something wrong with what you're using to flash the GApps, like the SD card, USB OTG, etc. Try switching it out.
But before doing all that, first flash the ROM, and then reboot again into TWRP and try flashing it if that makes a difference. Make sure you're flashing the ROM like the original post says.
crayonicle said:
Most likely there is something wrong with what you're using to flash the GApps, like the SD card, USB OTG, etc. Try switching it out.
But before doing all that, first flash the ROM, and then reboot again into TWRP and try flashing it if that makes a difference. Make sure you're flashing the ROM like the original post says.
Click to expand...
Click to collapse
Trust me, I am. ROM boots up fine though.
crayonicle said:
Hmmmm... I flashed Magisk fine here...
Hope you get it working again :good:
Click to expand...
Click to collapse
It was there all along, I'm a moron. It was in the settings menu.
crayonicle said:
I was about to give up and go back to stock but lo and behold I got ahold of a link to a really nice GSI for our Honor 7x devices, and any other device with the Hi6250 chipset. It has worked flawlessly on my BND-L24 and doesn't bootloop like the treble GSI found in the treble ROM forums.
Download link (2nd time just in case) - https://forum.xda-developers.com/p8lite/p8-lite-2017-development/rom-dotos-8-1-huawei-hi6250-t3793970
Open GApps (I use Pico) - https://opengapps.org
Treble GSIs (Why not) - https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Latest Magisk (Beta for fixed bugs and whatnot) - https://forum.xda-developers.com/apps/magisk/beta-magisk-v13-0-0980cb6-t3618589
Installation instructions -
Click to expand...
Click to collapse
That's great! Definitely giving this one a try
I recommend it, working great for me as well.
Is it just me or does the inbuilt UI tweaker not work? I can change the accents but not the settings and quicksettings background
Hello dear users and highly appreciated developers!
I reckon I am not the only one who is stuck on stock Pie and would really like to switch to a custom ROM but either don't know how, or aren't sure about it because of all the threads with bricked phones and all that stuff.
If there is anybody who has a complete tutorial/way of doing it - switching from stock Android Pie - January Security Update to any custom ROM, without bricking the phone, losing IMEI, signal etc. would be so kind to share it with us? Step by step would be convenient because there are people who aren't experienced at all with flashing and stuff like that. Especially in these "circumstances".
Very much thanks in advance, any help is much appreciated!
sainth4tred said:
Hello dear users and highly appreciated developers!
I reckon I am not the only one who is stuck on stock Pie and would really like to switch to a custom ROM but either don't know how, or aren't sure about it because of all the threads with bricked phones and all that stuff.
If there is anybody who has a complete tutorial/way of doing it - switching from stock Android Pie - January Security Update to any custom ROM, without bricking the phone, losing IMEI, signal etc. would be so kind to share it with us? Step by step would be convenient because there are people who aren't experienced at all with flashing and stuff like that. Especially in these "circumstances".
Very much thanks in advance, any help is much appreciated!
Click to expand...
Click to collapse
Hotboot latest official twrp using fastboot command "fastboot boot name of twrp.img
Take a backup of efs partition
Wipe system,data and factory reset
Flash the rom of ur Choice
Flash twrp installer by cosmicdan
Reboot>recovery
Flash gapps+magisk
Reboot to system
Thats what i did
And you didn't get any "Your system has been destroyed" messages after hotbooting TWRP or stuff like that?
hot booting twrp is fine, just dont flash it. it mess up everything on pie.
make a efs backup on twrp fist then make a copy of it on your computer.
hot booting to twrp may take up to 30 seconds, dont panic.
@apexashwin
Hey, can you please link me that "twrp installer by cosmicdan"?
Also, if I flash Pixel Experience do I have to still do the steps which'd come after flashing the ROM? (installing cosmicdan's stuff, gapps, etc.)
sainth4tred said:
@apexashwin
Hey, can you please link me that "twrp installer by cosmicdan"?
Also, if I flash Pixel Experience do I have to still do the steps which'd come after flashing the ROM? (installing cosmicdan's stuff, gapps, etc.)
Click to expand...
Click to collapse
It's easy to find. Just find it in the rom/kernel/recovery section.
And as they stated in PE OP, it included gapps so you don't have to flash gapps.
I did in fact do what you said and I managed to flash Pixel Experience without any trouble! Thank you very much
Utimate Q Rom
lots of under the hood tweaks great battery based off stock very debloated same as A20 A30 A40 and A50 now Ultimate Q for A10
Rom Download https://www.androidfilehost.com/?fid=4349826312261802134
Ultimate Q download https://www.androidfilehost.com/?fid=4349826312261811703 this is latest
Telegram https://t.me/ultimate_Pie2
Stock kernel from firmeare
Hi, how to setup or install ultimate Q rom in A10 device.
Thank you...
Shomu11 said:
Hi, how to setup or install ultimate Q rom in A10 device.
Thank you...
Click to expand...
Click to collapse
Come to telegram can help better from there
we load gapps yes or not ?
findukv22 said:
we load gapps yes or not ?
Click to expand...
Click to collapse
No
Does it have any bug, is it necesary to have Stock Q installed before Flashing this one?
How Long does the Rom take to boot up on the first boot?
Hi when does the rom boot into the OOBE setup
Betrayal92 said:
Does it have any bug, is it necesary to have Stock Q installed before Flashing this one?
Click to expand...
Click to collapse
I would yes
EdwardTCM said:
Hi when does the rom boot into the OOBE setup
Click to expand...
Click to collapse
Come to telegram link is in post 1 can help better from there
Can you ppst the full instructions on how to install this please
I've successfully installed this on a Samsung Galaxy A10 model SM-A105F. Here's the simple explanation how I did it:
1. Used Freija to download stock firmware in case of brickada or loopery.
2. Unlocked bootloader.
3. Used Odin to flash the file vbmeta_disabled.tar to USERDATA to prevent Android Verified boot.
4. Installed custom recovery TWRP 3.4.
5. Wiped System, Data, Cache, Dalvik.
6. Installed Ultimate Q zip through recovery.
7. Installed Magisk Manager 20.4 zip through recovery.
8. Installed Samsung multidisabler through recovery.
9. Factory Reset wipe through recovery.
10. Reboot & enjoy.
Each of these steps are explained in detail elsewhere in guides, and if this is your first time it may seem complicated but this is more or less how it's done.
Thank for the rom..master, its great rom.
Some day, i want stock rom back but i dont have'nt keep it. And now i find in this thread..good job master
Hello, I am having some trouble finding the "allow usb debugging from this computer" pop-up. Could anyone please help me with it, i think the problem was related to the rom. Any help would be appreciated. Thanks.