Caution: Always be careful when you flash files. Be sure to understand how to backup and rescue your device in case of flash failure. Since this is a Beta Version, there may bugs and issues which I am not aware of.
ROM:Color OS 12
Android 12 For Oneplus 8
Latest Version:
Color OS 12.C08
https://gauss-componentotacostmanua...22/01/07/6bf5ed54316c4863b4e314020b2e962e.zip
Previous Version:
Color OS 12.C07
https://drive.google.com/file/d/18iVphKzgeIc1mUsEZaGC9tgN_-fKiDKU/view?usp=sharing
Instructions:
You must be running latest version of Oxygen OS 11. Download the attached ColorOS 12 zip file and do local update. Place ColorOS 12 inside internal storage – Go to settings – System update – Tap on Gear icon on the right top corner – Select local update – Select file & wait for Installation to complete and then reboot.
Note: When you have an existing google account logged in before installing update file, Google Play and services will still be available but if you upgrade from a freshly formatted OxygenOS 11 device with no google account, it isn't available anymore.
I have two OnePlus 8's. Tested this method and works both on my global and T-mobile variant.
Also, it is weird when you check the about phone section, our cpu processor now says Snapdragon 855 lol
Root:
- Unlock Bootloader (if not yet unlocked)
- Download and install attached magiskv23.0 apk
- I have provided different Color OS12 root toolkits depending on the Software Version you installed. Download and extract.
- Reboot to bootloader
- Run coloroot.bat
- Done
To downgrade: use MSM download tool and flash your stock firmware / alternatively I flashed an incompatible boot.img via fastboot, ROM will crash and you will boot automatically in bootloader mode. Go to recovery and format data & cache, after a few reboots, system will go back to my previous Oxygen OS 11.0.9.9 build.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This firware is a few months old we're on CBT5 at the moment
FoxyDrew said:
This firware is months old we're on CBT5 already
Click to expand...
Click to collapse
The actual version of this build is C.07 anf I corrected my title already..Is CBT 5 a later build for Coloros12? Could you share it?
This version is one build behind. Latest is C.08.will share it soon
oxygen 11.0.10.10 Does it work on
Also keep in mind that ColorOS by default has about 400 system apps installed. About 100 of those are random Chinese bloatware and spyware apps that can't be disabled without root. They somehow disabled using ADB commands to remove apps (fishy).
Im running c.08 right now fiddling with stuff but wouldn't recommend as a daily driver
Here is the ColorOS12 C.08 for Oneplus 8 Pro...
Google Drive: Sign-in
david1907 said:
oxygen 11.0.10.10 Does it work on
Click to expand...
Click to collapse
yes, I just confirmed it works too. just make sure you are running on latest oxygen 11 version before updating.
FoxyDrew said:
Also keep in mind that ColorOS by default has about 400 system apps installed. About 100 of those are random Chinese bloatware and spyware apps that can't be disabled without root. They somehow disabled using ADB commands to remove apps (fishy).
Im running c.08 right now fiddling with stuff but wouldn't recommend as a daily driver
Click to expand...
Click to collapse
yes still a lot of kinks. for one, I had to turn on and off USB debugging in C.07 just to get adb detected. Just installed C.08 and it feels a little bit smoother compared to c.07.
Tesla+ said:
Here is the ColorOS12 C.08 for Oneplus 8 Pro...
Google Drive: Sign-in
Click to expand...
Click to collapse
thank you! I have updated my post and included this link as latest version.. I also created a 1 click root toolkit for this version too.
drystxx said:
thank you! I have updated my post and included this link as latest version.. I also created a 1 click root toolkit for this version too.
Click to expand...
Click to collapse
He said it's for oneplus 8 pro?
Saw this on a Chinese forum and my op 8 not arrived yet. You guys can try:
Color OS for OP8 C.08
https://gauss-componentotacostmanual-cn.allawnfs.com/remove-d439d03cf495f6f71e7c06924a1e86cb/component-ota/22/01/07/6bf5ed54316c4863b4e314020b2e962e.zip
dlhxr said:
He said it's for oneplus 8 pro?
Saw this on a Chinese forum and my op 8 not arrived yet. You guys can try:
Color OS for OP8 C.08
https://gauss-componentotacostmanual-cn.allawnfs.com/remove-d439d03cf495f6f71e7c06924a1e86cb/component-ota/22/01/07/6bf5ed54316c4863b4e314020b2e962e.zip
Click to expand...
Click to collapse
Yeah I guess that was for oneplus 8 pro. I flashed the link you are using and it's working. Also made root to work.
FoxyDrew said:
Also keep in mind that ColorOS by default has about 400 system apps installed. About 100 of those are random Chinese bloatware and spyware apps that can't be disabled without root. They somehow disabled using ADB commands to remove apps (fishy).
Im running c.08 right now fiddling with stuff but wouldn't recommend as a daily driver
Click to expand...
Click to collapse
what is the better way for stability and clean UI? Color, Oxygen, Custom, or ditch the brand?
Sleeky1532 said:
what is the better way for stability and clean UI? Color, Oxygen, Custom, or ditch the brand?
Click to expand...
Click to collapse
I personally daily drive OxygenOS. It's very stable and I like the look and feel. However AICP ROM, is by far the smoothest and cleanest experience for the Oneplus 8 at the moment. Big ups to that dev (semdoc) he's a genius been using his roms for years.
Does anyone know if it works on a oneplus 8 tmobile IN2017?
I am on global rom 11.0.10.10.IN21AA
FoxyDrew said:
I personally daily drive OxygenOS. It's very stable and I like the look and feel. However AICP ROM, is by far the smoothest and cleanest experience for the Oneplus 8 at the moment. Big ups to that dev (semdoc) he's a genius been using his roms for years.
Click to expand...
Click to collapse
If you know the developer of that ROM, please ask him to remove the built-in su (or whatever magisk detects). There's a possibility I'm thinking of some other ROM, but I think this was the one I saw that in.
Thanks.
OOS is a bit crazy with the aggressive power management. Overall, though, I do like it better than Samsung, heh.
o5cargallo said:
Does anyone know if it works on a oneplus 8 tmobile IN2017?
I am on global rom 11.0.10.10.IN21AA
Click to expand...
Click to collapse
Yes.
Hello! How to change Breeno Voice to Google Assistant on C.08?
Oneplus 8 C.09
https://gauss-compotacostauto-cn.allawnfs.com/remove-9baee43ac5f207cc5aa940376035e0b3/component-ota/22/01/12/9ff42a05621f41eab865968655295bd6.zip
Oneplus 8 Pro C.09
https://gauss-compotacostauto-cn.allawnfs.com/remove-a9a9ae0b94e6680b0cea78811b214cdb/component-ota/22/01/12/db9996cbfadb4ed28c38fc4d825331d2.zip
And Oneplus 8 T C.10
https://gauss-compotacostauto-cn.allawnfs.com/remove-ec353a2632a87a11fc85c36abbed0026/component-ota/22/01/12/e7617bd05a2643c486ee481df80cbe75.zip
Mr. Shtein said:
Может быть, вы знаете, как обновить c.08 до c.09?
Click to expand...
Click to collapse
Via local update
Related
MIUI 10 (beta) for OnePlus 3/3T (Android 8.1)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
MIUI (which stands for Mi User Interface and pronounced "Me You I", a play on the common abbreviation of the words user interface as UI), developed by Xiaomi, is a stock and aftermarket firmware for smartphones and tablet computers based on the Google Android operating system. MIUI includes various features such as theming support
NOTE: This rom is based on latest Miui 10 China beta. Also i'm not the developer of this rom. Sharing the work here in XDA with permissions. Full credits to chinese developer HitoLiu
Disclaimer: This ROM is in beta testing for Android Oreo 8.1, so my not be stable for daily use and there may be some unknown bugs. Me or the developer is not responsible for any damage to your device or your data
Source
Baidu Downloads
Original Thread
Download Links
MIUI 10
GAPPS Install Google Installer v3
Xposed v90 for MIUI 10 Oreo
Download (after flashing, boot takes time, dont panic!)
Root for MIUI 10
Magisk
Installation
Before you flash this ROM, you need to remove any pin/password you have set in your previous ROM, or after booting you will get a black screen with the Chinese text.
1. Boot into TWRP recovery
2. Wipe System, Data, Cache & Dalvik
3. Go to Mount and uncheck System
4. Flash the latest OOS stable modem-firmware zip
5. Flash the MIUI 10 ROM and your desired root package
6. Wipe Cache & Dalvik and reboot
If you want to get rid of the useless chinese apps, just root and freeze the apps using titanium backup (do not delete as it will end in bootloop)
Siddk007 said:
Latest Alpha build of MIUI 9 available for OnePlus 3T based on Android N (credits : HitoLiu)
It is in its early stage of development and can be buggy. Try at your own risk.
MIUI 9 7.8.6 Download : https://drive.google.com/open?id=0B3SolX7qYf0ZWlFrR2R2SjVVcnM
Link to the original thread :
http://www.oneplusbbs.com/forum.php...603313&extra=page= 2&filter=typeid&typeid=123
Click to expand...
Click to collapse
Thank u so much for google drive link
Thank you. Downloading
Thank you. Downloading
Siddk007 said:
Latest Alpha build of MIUI 9 available for OnePlus 3T based on Android N (credits : HitoLiu)
It is in its early stage of development and can be buggy. Try at your own risk.
MIUI 9 7.8.6 Download : https://drive.google.com/open?id=0B3SolX7qYf0ZWlFrR2R2SjVVcnM
Link to the original thread :
http://www.oneplusbbs.com/forum.php...603313&extra=page= 2&filter=typeid&typeid=123
Click to expand...
Click to collapse
what about gapps bro?btw i downloaded,,flashing now
goutham raj said:
what about gapps bro?btw i downloaded,,flashing now
Click to expand...
Click to collapse
install google installer apk
Sent from my OnePlus A3010 using XDA Labs
Ok, so cam and alert slider not working. Also no sound from speaker and earphone.cannot be used as a daily driver. just flash and experience for now. but damn! miui9 is super smooth and fluid. lagfree so far.
screenies:
Sent from my OnePlus A3010 using XDA Labs
Siddk007 said:
Ok, so cam and alert slider not working. Also no sound from speaker and earphone.cannot be used as a daily driver. just flash and experience for now. but damn! miui9 is super smooth and fluid. lagfree so far.
screenies:
Sent from my OnePlus A3010 using XDA Labs
Click to expand...
Click to collapse
damn,,hows the fluency when compared to miui 8?
MIUI 9 is better than MIUI 8. Bugs needs to be foxed
goutham raj said:
damn,,hows the fluency when compared to miui 8?
Click to expand...
Click to collapse
MIUI 9 is better than MIUI 8. Bugs needs to be foxed
Does it boot with f2fs?
ast00 said:
Does it boot with f2fs?
Click to expand...
Click to collapse
Ext4 is preferred and recommended though to avoid soft bricks
Sent from my OnePlus3T using XDA Labs
Does camera app works?
Gauravlonkar said:
Does camera app works?
Click to expand...
Click to collapse
Not working
Can be a daily driver?
Gauravlonkar said:
Can be a daily driver?
Click to expand...
Click to collapse
Absolutely not.
Here is the complete guide and overview
Hi I installed this ROM but stopped on Couldn't verify device
unbas said:
Hi I installed this ROM but stopped on Couldn't verify device
Click to expand...
Click to collapse
http://cloud.tapatalk.com/s/5992af4d097ab/Screenshot_20170815-102219_01.png?
i see can't use camera app with rom, so can i use other camera app on this rom ?
duongthanhvien said:
i see can't use camera app with rom, so can i use other camera app on this rom ?
Click to expand...
Click to collapse
None will work
Sent from my OnePlus3T using XDA Labs
You know when next update?
Android Pie (9), Beta Closed 9.3.11, Rollout Started
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Regards,
camera2api enabled?
K1LLMONGER said:
camera2api enabled?
Click to expand...
Click to collapse
Youtube videos show the answer is no. That's unfortunate. Not sure why Xiaomi insists on keeping it disabled...
How can I install it? my xiaomi is not rooted and it's MIUI Global 10.2 Stable.
image inserted
K1LLMONGER said:
camera2api enabled?
Click to expand...
Click to collapse
Cam2API is not enabled and even manual ADB activation isn't working.
Regards,
https://www.google.com/amp/s/www.xd...ndroid-pie-xiaomi-redmi-note-6-pro-mi-6x/amp/
im trying this new android 9 rom now.And there is no huge differences on this rom.Some problems has gone..Like (whatsapp video recorder low voice quality problem,When i play games,notch not match at the top screen etc etc .)And again.there is no huge differences.Performance still good.Sometimes phone lagging and UI not smooth.I'm not tested battery yet..When i test it,i send the screenshots about SoT.
[email protected] said:
im trying this new android 9 rom now.And there is no huge differences on this rom.Some problems has gone..Like (whatsapp video recorder low voice quality problem,When i play games,notch not match at the top screen etc etc .)And again.there is no huge differences.Performance still good.Sometimes phone lagging and UI not smooth.I'm not tested battery yet..When i test it,i send the screenshots about SoT.
Click to expand...
Click to collapse
Performance on Beta Nightly 9.3.11 Rocks!
fbirraque said:
Cam2API is not enabled and even manual ADB activation isn't working.
Regards,
Click to expand...
Click to collapse
Does that mean that we won't get camera2 api at all?
saedkebbeh said:
Does that mean that we won't get camera2 api at all?
Click to expand...
Click to collapse
It isn't possible to manually activate Cam2API on Redmi Note 6 Pro at this moment with ADB commands.
The issue seems to be broader than just Android Pie (Beta 9.3.11) version as reported in the Xiaomi Global Forum, activation also doesn't work anymore in the latest Android Oreo versions (Stable 10.2.2.0 & Beta 9.3.1)
fbirraque said:
It isn't possible to manually activate Cam2API on Redmi Note 6 Pro at this moment with ADB commands.
The issue seems to be broader than just Android Pie (Beta 9.3.11) version as reported in the Xiaomi Global Forum, activation also doesn't work anymore in the latest Android Oreo versions (Stable 10.2.2.0 & Beta 9.3.1)
Click to expand...
Click to collapse
Will be there a workaround for this?
saedkebbeh said:
Will be there a workaround for this?
Click to expand...
Click to collapse
Flashing this file via TWRP will activate it.
HAMID308 said:
Flashing this file via TWRP will activate it.
Click to expand...
Click to collapse
So the issue is related to ADB?!
saedkebbeh said:
So the issue is related to ADB?!
Click to expand...
Click to collapse
actually you need these in your build.prop
persist.camera.HAL3.enabled=1
persist.vendor.camera.HAL3.enabled=1
persist.camera.eis.enable=1
HAMID308 said:
actually you need these in your build.prop
persist.camera.HAL3.enabled=1
persist.vendor.camera.HAL3.enabled=1
persist.camera.eis.enable=1
Click to expand...
Click to collapse
Understood, what I meant, is that it's not working if we try to do this without root
HAMID308 said:
Flashing this file via TWRP will activate it.
Click to expand...
Click to collapse
Thanks for your input.
Already tested and didn't worked either on Redmi Note 6 Pro (Beta Nightly 9.3.14).
fbirraque said:
Thanks for your input.
Already tested and didn't worked either on Redmi Note 6 Pro (Beta Nightly 9.3.14).
Click to expand...
Click to collapse
With Batik Recovery Hal3 enabled working good with 9.3.14
https://forum.xda-developers.com/redmi-note-6-pro/development/official-batik-recovery-t3905386
DemoonXP said:
With Batik Recovery Hal3 enabled working good with 9.3.14
https://forum.xda-developers.com/redmi-note-6-pro/development/official-batik-recovery-t3905386
Click to expand...
Click to collapse
I'm currently using Official TWRP version.
fbirraque said:
I'm currently using Official TWRP version.
Click to expand...
Click to collapse
use other TWRP versions such as PItchBlack RECOVERY or TWRP 3.2.3-2 by ATG Droid.works like a charm.
fbirraque said:
It isn't possible to manually activate Cam2API on Redmi Note 6 Pro at this moment with ADB commands.
The issue seems to be broader than just Android Pie (Beta 9.3.11) version as reported in the Xiaomi Global Forum, activation also doesn't work anymore in the latest Android Oreo versions (Stable 10.2.2.0 & Beta 9.3.1)
Click to expand...
Click to collapse
u can activate camera2api with twrp recovery but there is a problem.İm testing now android 9.0.everyweek phone updating and bugs fixing.but now i cannot update my phone.otherdays when i install any zip file with twrp recovery,phone deletes recovery.but there is a new system update(weekly) comes to my phone.i cannot install it.Directly going twrp recovery.im install now android 9 test zip again and then gonna try new update.And ofcorse camera2api feature goes off automaticklly.
Edit: OnePlus officially confirmed that there is no new update A11 ColorOS for 8 series. A12 of the 8 series canceled HOS12 and changed to ColorOS 12. and Color OS stable version of the 8 series is directly ColorOS 12 (based on A12). Release time of Color 12 of the 8 series is currently only officially stated in 2022, there is no specific date.
It's ALPHA Build, so it can be buggy !
Requirements
HOS MSM File > Click
ColorOS MSM File > Click
Qualcomm Driver > Click
If you are coming from non chinese variant , first switch to hos then flash color os with msm
STEPS
Disconnect phone from pc and turn of phone.
Open MSM file and choose H2 from Target section (It's important!)
Press Volume up + down then plug the cable
Press start button from msm
Repeat this step for oos to hos switch and hos to coloros switch
Tested on KB2003,KB2000,KB2001
For Debloat without root
Enable USB Debugging ( Settings > About phone > Baseband & Kernel > Tap 10 times on Build number than go to Settings > Additional Settings > Developer Options > USB Debugging
Download latest platform-tools in here
Move "8T-COSdebloater.bat" file to platform tools folder
Connect phone via usb cable and allow usb debugging
Click and run 8T-COSdebloater.bat
Other informations
Bootloader can be unlocked
Widevine Status L1 either bl locked or unlocked
Can be rooted but safetynet fails , fod doesnt work
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
did flash it yet,what security patch does it come with?
rikimtasu said:
did flash it yet,what security patch does it come with?
Click to expand...
Click to collapse
February
Phreaker8 said:
February
Click to expand...
Click to collapse
Thanks.guess i'm sticking which what i have then
No gapps right ?
Akhayev said:
No gapps right ?
Click to expand...
Click to collapse
Probably not, just flash gapps from temp recovery
brashmadcap said:
Probably not, just flash gapps from temp recovery
Click to expand...
Click to collapse
I don't know how and which gapps do I need to use ? Stock mini nano ?
Akhayev said:
No gapps right ?
Click to expand...
Click to collapse
play store , gms can be installed.
Akhayev said:
I don't know how and which gapps do I need to use ? Stock mini nano ?
Click to expand...
Click to collapse
Obviously the bare minimum then install what you need, who knows/cares what they’re branded (pico/nano), use your best judgement on which one is just store+gms
I flashed the rom and installed play store manually then installed google apps
do you happen to know whether the German language works?
Theres no german language
When I want go back from ColorOS, is the same as before first flash hydrogen via MSN after that Oxygen via MSN or can I flash Oxygen directly
GraveDigger176 said:
When I want go back from ColorOS, is the same as before first flash hydrogen via MSN after that Oxygen via MSN or can I flash Oxygen directly
Click to expand...
Click to collapse
GraveDigger176 said:
When I want go back from ColorOS, is the same as before first flash hydrogen via MSN after that Oxygen via MSN or can I flash Oxygen directly
Click to expand...
Click to collapse
GraveDigger176 said:
When I want go back from ColorOS, is the same as before first flash hydrogen via MSN after that Oxygen via MSN or can I flash Oxygen directly
Click to expand...
Click to collapse
This is a totally unnecessary step that OP has mentioned in the first post. You can just use MSM tool to go from Oxygen OS to Colour OS , flashing hydrogen OS first doesn't do anything as Colour OS MSM tool has all the necessary files to flash colour OS
Raza Qadri said:
This is a totally unnecessary step that OP has mentioned in the first post. You can just use MSM tool to go from Oxygen OS to Colour OS , flashing hydrogen OS first doesn't do anything as Colour OS MSM tool has all the necessary files to flash colour OS
Click to expand...
Click to collapse
Agreed. MSM flashes the same things with hydrogen or ColorOS, they're different OS's but anything the hydrogen MSMtool put on there is going to be overwritten. I'm sure you can just skip hydrogen and go straight to ColorOS from OOS.
GraveDigger176 said:
When I want go back from ColorOS, is the same as before first flash hydrogen via MSN after that Oxygen via MSN or can I flash Oxygen directly
Click to expand...
Click to collapse
Don't worry about HOS, just flash OOS MSM tool and you should be good
Yeah thx for the answer I flashed OOS directly without any issues. I go back because my battery was not really good on ColorOS, but that the only point in it. The rest is very smooth and way better as on OOS
please help me i cannot turn back to oxygenos, it stucks at qualcom crashdump.
i just can turn back to hydrogen os . please help me please
GraveDigger176 said:
Yeah thx for the answer I flashed OOS directly without any issues. I go back because my battery was not really good on ColorOS, but that the only point in it. The rest is very smooth and way better as on OOS
Click to expand...
Click to collapse
For me the battery on coloros is better than oxygen , and yeah its much better than oos I've been using it since they released it and didn't have any issues till now
installing color OS with this process can I update via ota ?? or where can I see which version is the latest for our device?
Pretty stable so far, no major bug found. One small caveat is that the device mostly stays in 60Hz, there's a fix to make it run at 120Hz but it doesn't stay for long.
Guide to upgrade at #2.
EDIT: New 120hz fix found, check #8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 1: Use MSM to go to HydrogenOS
Link: Link
Step 2: After going to HydrogenOS, use local upgrade to upgrade to COS 12
Link: Link
If there were a way to get 120hz working stably I'd be flashing it right now lol. It follows OnePlus's stupid design choices in ignoring Material You and the new QS style right?
pro_granade said:
If there were a way to get 120hz working stably I'd be flashing it right now lol. It follows OnePlus's stupid design choices in ignoring Material You and the new QS style right?
Click to expand...
Click to collapse
Actually 120Hz is working somewhat stable now, I'll need some more time to test it thoughly
They ignored the QS, but I can see some MY elements in apps like Chrome and Photos
How is battery stand by in this version? also notification delay?
I heard there high latency on notification on this os
OOS quite bad and high battery usage
taanh1412 said:
Actually 120Hz is working somewhat stable now, I'll need some more time to test it thoughly
They ignored the QS, but I can see some MY elements in apps like Chrome and Photos
Click to expand...
Click to collapse
That's really sad, I'm torn on wanting to try this and just sticking to the AOSP A12 builds I'm already on. I really like the new Android 12 look and I feel like ColorOS 12 ruins it entirely.
What's fix for getting 120hz?
Raza Qadri said:
What's fix for getting 120hz?
Click to expand...
Click to collapse
Open developer setting, turn on USB debugging and "Disable permission monitoring"
Then plug your phone into a computer and execute these command in adb:
Code:
adb shell settings put system min_refresh_rate 120.0
adb shell settings put system peak_refresh_rate 120.0
Battery seems to be pretty good, at least on par with OOS
I don't see any notification latency so far with Gmail and Telegram
Hellskull said:
How is battery stand by in this version? also notification delay?
I heard there high latency on notification on this os
OOS quite bad and high battery usage
Click to expand...
Click to collapse
taanh1412 said:
Step 1: Use MSM to go to HydrogenOS
Link: Link
Step 2: After going to HydrogenOS, use local upgrade to upgrade to COS 12
Link: Link
Click to expand...
Click to collapse
Hey, thanks for this guide.
I'm in the US, so I'm used to OOS, so I just have to ask if Google stuff is included in ColorOS? Or is it in this Coloros12 beta build at least? Just wanted to ask before I try this out, as I like having Google on my phone.
Thanks again. Hope to hear back.
dpryor88 said:
Hey, thanks for this guide.
I'm in the US, so I'm used to OOS, so I just have to ask if Google stuff is included in ColorOS? Or is it in this Coloros12 beta build at least? Just wanted to ask before I try this out, as I like having Google on my phone.
Thanks again. Hope to hear back.
Click to expand...
Click to collapse
Most of the Google service are included, but Play Store is not installed by default. You can just download a Play Store APK from APKMirror/APKPure/... and it will work just fine.
One small problem is in the setting, it shows that the device is not certified, maybe Magisk can fix that.
taanh1412 said:
Most of the Google service are included, but Play Store is not installed by default. You can just download a Play Store APK from APKMirror/APKPure/... and it will work just fine.
One small problem is in the setting, it shows that the device is not certified, maybe Magisk can fix that.
Click to expand...
Click to collapse
Thanks for the reply
And that will do just fine. I don't care about the not certified thing personally.
[ROM][11_C_02][OFFICIAL][BETA]Color OS[Oneplus 8 | 8 PRO | 8T]
As you know, Oneplus is starting beta testing Color OS, which will replace HydrogenOS. Please note, this is the Bata version, and some of the functionality does not work. Frimware + MSM tool: OnePlus 8 PRO...
forum.xda-developers.com
On my phone 8t , i installed color os 11,. I used this guide.
I can to update, on color os 12?
Is this the closed beta builds that dropped?
taanh1412 said:
Step 1: Use MSM to go to HydrogenOS
Link: Link
Step 2: After going to HydrogenOS, use local upgrade to upgrade to COS 12
Link: Link
Click to expand...
Click to collapse
Link to MSM does not work. Is there an alternative download?
Can you go back to Android 11?
cammykool said:
Is this the closed beta builds that dropped?
Click to expand...
Click to collapse
Yes, this is that closed beta build
fenie said:
Link to MSM does not work. Is there an alternative download?
Can you go back to Android 11?
Click to expand...
Click to collapse
I think you can directly upgrade the ColorOS 12 build from Oxygen 11, but you'll need a complete data format for it to work
thanasis12. said:
[ROM][11_C_02][OFFICIAL][BETA]Color OS[Oneplus 8 | 8 PRO | 8T]
As you know, Oneplus is starting beta testing Color OS, which will replace HydrogenOS. Please note, this is the Bata version, and some of the functionality does not work. Frimware + MSM tool: OnePlus 8 PRO...
forum.xda-developers.com
On my phone 8t , i installed color os 11,. I used this guide.
I can to update, on color os 12?
Click to expand...
Click to collapse
I'm not sure, you can try it out and let me know if that works
Do these colorOS builds pass Ssfteynet if Play is installed? And is there any risk on a T-Mobile 8T like there was when you flash 9R firmware
cammykool said:
Do these colorOS builds pass Ssfteynet if Play is installed? And is there any risk on a T-Mobile 8T like there was when you flash 9R firmware
Click to expand...
Click to collapse
It only pass the basic test, failed the cts test
I'm not sure if that can work on T-Mobile, give it a try
taanh1412 said:
It only pass the basic test, failed the cts test
I'm not sure if that can work on T-Mobile, give it a try
Click to expand...
Click to collapse
You can use https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf to change build fingerprint to official 8T release. It will make your CTS pass. I am rooted and have safetynet pass with fod working!
Delet
OxygenOs 12 CBT for kb2001 - working on all variants (you install at your own risk)
File on MEGA
mega.nz
maciek84325 said:
OxygenOs 12 CBT for kb2001 - working on all variants (you install at your own risk)
File on MEGA
mega.nz
Click to expand...
Click to collapse
Just a heads up. This will be removed as it violates the OnePlus tos
ElliSkyline said:
Just a heads up. This will be removed as it violates the OnePlus tos
Click to expand...
Click to collapse
Why? Please contact me directly if you can point this out exactly how.
Timmmmaaahh! said:
Why? Please contact me directly if you can point this out exactly how.
Click to expand...
Click to collapse
according to the moderator here
[CLOSED]OnePlus 8t oxygen os 12 cbt
Download link: I have removed it due to the request of OnePlus staff and I will respect that decision. Incase your still on this I suggest you use msm to revert back to 11 since hard bricks are possible on this build
forum.xda-developers.com
Read the last few post
ElliSkyline said:
according to the moderator here
[CLOSED]OnePlus 8t oxygen os 12 cbt
Download link: I have removed it due to the request of OnePlus staff and I will respect that decision. Incase your still on this I suggest you use msm to revert back to 11 since hard bricks are possible on this build
forum.xda-developers.com
Read the last few post
Click to expand...
Click to collapse
Read them yourself, the esteemed moderator didn't take a stance and locked at OP's request because OP *thinks* he broke tos. I don't see any violation on our side.
Okay cool!
How to install from OOS11? Just local upgrade in oxygen system updater?
And how to persist root? -> OTA Method in Magisk installer?
Thanks for your guidance.
maciek84325 said:
OxygenOs 12 CBT for kb2001 - working on all variants (you install at your own risk)
File on MEGA
mega.nz
Click to expand...
Click to collapse
It isn't working on all variants. On most variants you will be without network connectivity.
i have kb2003. Will I lose my network?
Laapander said:
i have kb2003. Will I lose my network?
Click to expand...
Click to collapse
on kb2003 all working great for some devices. But I don't know why it works on some devices and not on the rest.. You must try to see it will work for your device..
Probably that's the reason:
"It's not cause it was designed for indian models (but it was) some OnePlus 8t have ddr5 ram instead of ddr4 and the ones with ddr5 are the ones who will most likely have network issues."
If you want to back stable rom, use this tool (https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4180837/)
Raza Qadri said:
It isn't working on all variants. On most variants you will be without network connectivity.
Click to expand...
Click to collapse
In fact, sorry for my mistake. Probably the type of RAM is to blame
I have ddr5 variant. So I think I will wait for something more sure.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Laapander said:
I have ddr5 variant. So I think I will wait for something more sure.
Click to expand...
Click to collapse
I also have ddr5 variant. (I check - "adb shell getprop ro.boot.ddr_type" and answer is 1)
If I have time during the weekend, I will backup, downgrade to OOS 11.0.7.10 (because 11.0.12.12 is newer than CBT and updater shows error) and install CBT. Then I will test and write comment if ewerything works
FYI, this OOS 12 payload.bin has both (xbl, xbl_config) and (xbl_lp5, xbl_config_lp5) images so it caters for both ddr4 and ddr5 - just like an OOS 11 payload.bin does.
I installed OOS 12 CBT - WITHOUT doing a factory reset - using the latest TWRP (3.6.0_11-3) and it worked flawlessly.
All my installed apps are present and everything looks fine. There are only two significant issues I have found so far:
1. The fingerprint reader doesn't work (maybe because I didn't do a clean install). Edit: after a reset (which does a "format data") FP works
2. I cannot boot back into TWRP unless I switch slots. But since this thread is not about TWRP, I wont talk about it here any more.
Edit:
3. I've not been able to get adb to work.
I can make phone calls, send SMS, connect to the internet using both WIFI and mobile data. And my phone is a DDR5 device.
But face unlock works brilliantly.
BillGoss said:
I installed OOS 12 CBT - WITHOUT doing a factory reset - using the latest TWRP (3.6.0_11-3) and it worked flawlessly.
All my installed apps are present and everything looks fine. There are only two significant issues I have found so far:
1. The fingerprint reader doesn't work (maybe because I didn't do a clean install).
2. I cannot boot back into TWRP unless I switch slots. But since this thread is not about TWRP, I wont talk about it here any more.
I can make phone calls, send SMS, connect to the internet using both WIFI and mobile data. And my phone is a DDR5 device.
Click to expand...
Click to collapse
Did you installed in top of newest OOS 11?
Laapander said:
Did you installed in top of newest OOS 11?
Click to expand...
Click to collapse
Yup!
I flashed this beta in TWRP and for a brief look and testing I haven't found any bugs ATM
Seems pretty smooth
I'm really stupid..
Why I didn't think to use twrp and them I do not need to delete data and downgrade to older OOS.
I can even backup in twrp and then if I don't like it, restore the backup and the device will be restored to the state before cbt installation..
This is the best option I think. if the system works fine for me then I will do a clean install without twrp