Hi guys, i've bought note 20 ultra recently, i have to flash stock rom to my note fan edition phone but there is a problem.
I've tried several versions of odin in order to flash but no luck.
I had floydq v6.0 before, now phone doesnt even booting it says only "official released binaries are allowed"
Here is my steps:
- I downloaded binaries for N935F from sammobile,
- Tried to flash but no luck it stucks at SetupConnection or NAND Write Start or Set Partition part
- Then i came across with a thread that says i have to enable OEM Unlock but the thing is i couldnt see that switch in my developer settings page, i tried several things
- Now i am trying oem-unlock with fastboot but the thing is fastboot does not recognize my phone, but before the brick adb could see my phone idk what am i doing wrong
- I think i successfully installed the right drivers such as (Google Driver, Samsung OEM driver)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help me about that problem?
Using odin v3.13.1 solved my problem.
Related
Hi people.
I from Chile and sorry if I have bad english.
I bought an LG G2 D805
The problem is that the device came wrong flashed.
They wanted to put Lollipop and caused a brick.
When you turn on the device immediately get the recovery TWRP with the following
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I connect the device to the computer in recovery mode I can not use the MTP for the same reason as shown in the image.
In the recovery, selecting the install mode, appears in storage: internal storage (0)
I can enter the download mode (bootloader) so even I have hopes of saving the device.
I used various tutorials to fix the device and none has worked.
I used the method with LG Launcher .. and nothing
with flashtool, various methods (kdz and TOT) ... and nothing
I used ubuntu but recognizes it as computed Lg G802 and that caught my attention.
I think I can not fix the device while the recovery not moutn the data.
never before he had had problems following their tutorials but I have not found a solution for this problem and I need your help.
THANKS IN ADVANCE
I was trying to root and mod my spare Galaxy S8 and during the process the battery died... now it is stuck on the boot screen. When it turns on it opens to the custom Samsung boot screen and does not change or boot any further. When I reboot it with the button combination it boots into upload mode. From there I must reboot again. I can still get into download mode and into android recovery mode, but have been unsuccessful at and attempts of flashing with Odin, ADB, or from the SD card. I am completely confused. Any advice will help and be greatly appreciated!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use modded Odin with the latest firmware which is QL1.
Stop trying to root
I having a similar problem, just that it DID finished updating. Now it's stuck at boot screen even after updating it to the last version available (AQL1). I don't know what else to do....
well I gave up and finally went to Best Buy and spoke with a samsung employee.
I was able to get my phone back in 100% working order! He just used his special scan tool and flashed it the very first time. For FREE!!!!!
I need help with a galaxy S7 Edge that is stuck on boot screen.
I am trying to bypass the FRP lock on this phone using the guide by techeligible3322 (link here).
I had software build G935TUVS4QC1 running on this phone, which didn't support the bluetooth headset method. So , I ended up flashing Combination ROM on it. Here is the rundown of what has happened so far.
1. Tried to flash Combination file G935AUCU2APG2 with Odin 3.12 which got stuck. Had to close odin after waiting for hours. Phone was stuck in download mode.
2. Dowloaded Odin 3.13 and flashed combination Rom G935TAUCU4AQB1. Flash succeeded. But phone stuck on boot screen.
3. Flashed G935TAUCU4APL2 combination rom with Odin 3.13. Success. But still stuck on boot screen.
Download screen shows the following info.
Can anyone tell me what I am doing wrong here?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After a few failed attempts and some net digging, i decided to downgrade my firmware to an early android 9 that i grabbed from samlabs.
i figured from this "workaround" that i can finally get magisk working with my device
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but due to my limited knowledge, i don't exactly know what he mean't here, like... how do i flash something with a odin tarball???
and how do i even extract the files mentioned?
can anyone lay it to me straight?
Github Thread
PS: my bootloader is already unlocked, i tried the simple method that makes sense to me and just flashed a patched AP of the aforementioned Firmware but unfortunately hit
the usual dead end (Secure check fail, recovery.img).
Note that the bootloader with Android 10 and later on the Samsung Galaxy Tab A 8.0 (2019) [SM-T290] is suffering from this same issue.
Click to expand...
Click to collapse
It is about a different device, but may work.
Just replace the aboot.mbn.lz2 and vaultkeeper.mbn.lz2 in a tarball (.tar file) with aboot.mbn.lz2 and vaultkeeper.mbn.lz2 from last Android 9 tarball (.tar file)
I don't remember which one contains these files, so find one with them
Hi guys, my English is bad at first so I'm sorry.
I'm telling the whole story from beginning to end. I have an old Samsung Grand Neo device. I was going to reset this device in recovery mode, but there was a red cross under the Android sign in recovery mode. So I rebooted the device from the power button without looking for the solution. Then, while the device was restarting, the Samsung Grand Neo text came up and when the Samsung screen was coming up, it threw itself back to the Samsung Grand Neo screen and the device did not turn on again. Then I tried to install different software from Odin 4 times, but I could not get any results. (I installed a single file, I also installed the 4-file one, but it didn't work.) Just while doing a detailed research, it said to make the Re-Partition option ticked in Odin's settings. What does this Re-Partition do? I would be very grateful if anyone who has come across this problem or has knowledge of it can help. (The device remains as in the following photo, it is a visual representation.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}