Database Users

bricked!!!! Qualcomm HS-USB QDLoader 9008

hi
Sorry for my English
I wanted to root my phone but made ​​a mistake somewhere.
now the phone is always off. when connected to the computer, program RSD see him as QHSUSB_DLOAD; computer see him as Qualcomm HS-USB QDLoader 9008
RSD don`t flasing(The phone failed to switch to fastboot mode)(FAIL) flasing cabl dont helped.
How reestablished bootloader

nobody knows how to help me?

It appears that you have a corrupt boot loader and unfortunately we do not have any of the files available to us that would be needed to fix your phone.
They would be the proprietary binaries and low level boot images from Qualcomm for flashing to a new board at the factory.
We have such repair kits for some earlier OMAP based devices but I have not heard of or seen any such files for the Qualcomm S4 devices, sorry.

If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.

kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
how?

same problem
i have the same problem and the same brick. Can anyone help us?:crying:

+ to brick reason
Ral126 said:
i have the same problem and the same brick. Can anyone help us?:crying:
Click to expand...
Click to collapse
You forget, thats you also try to flash MIUI!

St.Noigel said:
You forget, thats you also try to flash MIUI!
Click to expand...
Click to collapse
Yes) I tried))) But for the beginning i need to reestablished bootloader.

ASUS PadFone 2 QHSUSB_DLOAD error
I've an ASUS Padfone 2 with the same error. Looks like it's kind of easy to get these Qualcomm devices into this f*cking issue
My case is detailed here: http://forum.xda-developers.com/showthread.php?t=2220775

kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
Good evening,
I bricked the Innos D9 because I installed 2 new roms .........
I first stalled the DNS and it was a very nice rom but I was not 100% happy ...........than I installed the Cloudfone rom and this was very bad..........than I wanted to go back to the DNS rom and I got the same problem as yours.
I searched for a solution and I found a video on YouTube ..." Restore Acronis Backup on CloudFone Thrill 430X (Innos D9) " and after this experiment my Innos D9 is totally dead.....it isn't recognized by the computer ....not even by clicking or holding any button ..........when I connect the USB to my laptop I can only hear the sound that something has been connected to the laptop ........but nothing is visible.
any help to unbrick my phone?

One thing you could try is sending a message over to Josh at mobiletechvideos.com and see if he can help. It looks like they offer JTAG repairs for hard bricks(link).
Note: I don't work for mobiletechvideos or anything. I just had my Samsung Focus power button repaired by them a couple weeks ago and they did a pretty nice job.

I've got same problem with Asus Padfone A66.
I installed the qualcomm drivers, and QPST program is see my phone, but i have no idea howto use this program, or howto convert image files to (proper) .hex format, or howto build needed files. My cpu is MSM8260 and QPST see my phone as Q/QCP-XX (Download). And maybe I need for a proper MPRG8260.hex and aml, mbm files for flashing. so QPST sjust throwing error, ahnd happen nothing.

http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3

Hello everyone, I'm having the same problem .
Someone found a solution to this problem?
I have a RAZR HD .
Thank's

Heavy Hard Brick Zuk Z1 international Version

HI everybody, I have a very big problem with my zuk. Trying to solve a problem about network, I thought to come back to stock via fastboot. But given that I was tired doing so many tries, I wrongly flash a zip file via fastboot instead of use adb, so the phone didn't turn on anymore. I must say first of all that it isn't my first phone, so I'm not a newbie. The real problem is: When I plug Zuk into my Pc( Windows 10) it isn't recognized as qhsusb_bulk ( It could be easy to solve the problem) but as "unknown usb device (Device Descriptor Request Failed)". I try to plug the phone pressing every button like Vol+ and power, Vol- and power but nothing to do. I' m already in Test Mode on Windows 10 and I deleted every Zuk or Qualcomm Drivers. Anyone can help me?
Thank you
Ps: Even If the screen is always off, Is there a way to boot into fastboot mode with hardware keys?

Xluk3 said:
HI everybody, I have a very big problem with my zuk. Trying to solve a problem about network, I thought to come back to stock via fastboot. But given that I was tired doing so many tries, I wrongly flash a zip file via fastboot instead of use adb, so the phone didn't turn on anymore. I must say first of all that it isn't my first phone, so I'm not a newbie. The real problem is: When I plug Zuk into my Pc( Windows 10) it isn't recognized as qhsusb_bulk ( It could be easy to solve the problem) but as "unknown usb device (Device Descriptor Request Failed)". I try to plug the phone pressing every button like Vol+ and power, Vol- and power but nothing to do. I' m already in Test Mode on Windows 10 and I deleted every Zuk or Qualcomm Drivers. Anyone can help me?
Thank you
Ps: Even If the screen is always off, Is there a way to boot into fastboot mode with hardware keys?
Click to expand...
Click to collapse
Not that I know,do you have the stock recovery or twrp?

I have the exact problem with my new zuk z1. Any idea is appreciated. The nice phone seems lost now.

Seems like you'll have to restore your zuk to the zui version again. Do you have qrst and zui version downloaded??

The service port never pops up
I do have the qpst and the zui rom. The main obstacle is that qualcomm service port never pop up.

Setup.zuk said:
I do have the qpst and the zui rom. The main obstacle is that qualcomm service port never pop up.
Click to expand...
Click to collapse
try this:
start QFIL from the QPST folder
Click browse on the programmer path row and select prog_emmc_firehose_8974.mbn from the directory where you unzipped the QPST ZUI ROM
and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone,
you may need to select port in the QFIL program and be quick with it, took me a few tries before I got it right so just take out the cable
and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal.
If everything went well then you should have ZUI loaded onto your phone and you are met with Chinese language as default.
On the first screen you are met with, just press the button in the bottom (on screen), then press cogwheel (which is the settings),
scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option
to change language to english incase you cant make out the chinese and you should be good to go

Nikosstamatiou said:
try this:
start QFIL from the QPST folder
Click browse on the programmer path row and select prog_emmc_firehose_8974.mbn from the directory where you unzipped the QPST ZUI ROM
and then click browse on the search path row and select the xml file + the other patch file which comes after it.
When thats done, make sure phone is off and then hold vol+ while you are inserting usb cable into phone and QFIL should then detect phone,
you may need to select port in the QFIL program and be quick with it, took me a few tries before I got it right so just take out the cable
and turn off and try again if you fail to make them connect.
Not only you need to select comport, you also need to press the download button aswell as soon as possible or else phone will continue booting as normal.
If everything went well then you should have ZUI loaded onto your phone and you are met with Chinese language as default.
On the first screen you are met with, just press the button in the bottom (on screen), then press cogwheel (which is the settings),
scroll down to yet another cogwheel in here which should be below a lock icon, then press second option in here and then the top option
to change language to english incase you cant make out the chinese and you should be good to go
Click to expand...
Click to collapse
So i am having the same problem. The phone is not being recognized by the software. That is the whole problem. Any ideas?

Tarsa said:
So i am having the same problem. The phone is not being recognized by the software. That is the whole problem. Any ideas?
Click to expand...
Click to collapse
Actually, I think the problem is, that it will not reach the fastboot mode, due to the non-stop process of system-updating and boot-loop. I can observe for a very short time the message 'systemupdate will be installed' and then the screen becomes black again. This procedure is repeating every time. I will wait till the battery is empty and see, whether the boot with Volume-+--USB-cable will work.

mikarbach said:
Actually, I think the problem is, that it will not reach the fastboot mode, due to the non-stop process of system-updating and boot-loop. I can observe for a very short time the message 'systemupdate will be installed' and then the screen becomes black again. This procedure is repeating every time. I will wait till the battery is empty and see, whether the boot with Volume-+--USB-cable will work.
Click to expand...
Click to collapse
PLease do update me if you manage to fix it. This is getting very frustrating

I have the same problem, caused after a cyanogenmod update... Did someone fix this??

Another hard bricked Z1 here.
QFIL recognizes the phone (as Qualcomm 9008 etc.). So I am able to click Download, but after a few seconds, it fails with these errors:
Code:
[...]
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
in QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
in QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
I've tried many many times, and many different things. Still no luck .
I'd appreciate if anyone could input some new ideas of other stuff to try. Thanks

CarlosAir said:
Another hard bricked Z1 here.
QFIL recognizes the phone (as Qualcomm 9008 etc.). So I am able to click Download, but after a few seconds, it fails with these errors:
Code:
[...]
Sending NOP
NOP: Fail Code: 9
Unable to send FireHose NOP, Device is not in Firehose mode !
Download Fail:System.Exception: Failed to send Firehose NOP to the phone.
in QC.QMSLPhone.Phone.QPHONEMS_FireHoseNOP()
in QC.SwDownloadDLL.SwDownload.FireHoseDownloadImage(Boolean bResetPhone, List`1 rawprogramFilesList, List`1 patchFilesList, Single& fImageSizeInMB, Single& fThroughput)
Download Fail:FireHose Fail FireHose Fail
Finish Download
If tried many many times, and many different things. Still no luck .
I'd appreciate if anyone could input some new ideas of other stuff to try. Thanks
Click to expand...
Click to collapse
No idea, my device is actually dead.

mikarbach said:
No idea, my device is actually dead.
Click to expand...
Click to collapse
Aw .
I don't want to lose hope, but everything I've tried so far has failed. :| , and I don't know what else to try.

CarlosAir said:
Aw .
I don't want to lose hope, but everything I've tried so far has failed. :| , and I don't know what else to try.
Click to expand...
Click to collapse
Try another cable, another USB slot, another pc/laptop

mikarbach said:
No idea, my device is actually dead.
Click to expand...
Click to collapse
try to flash cos 12.1 with qfil.
its there somwhere on 4pda forum(search there).
Sent from my Z1 using XDA-Developers mobile app

So guys if I try to flash unofficial CM 13 do I risk bricking the device for good???

t.h.i said:
try to flash cos 12.1 with qfil.
its there somwhere on 4pda forum(search there).
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Of course I have tried this, with two different computers and two different USB cable, both actually working on my N5X. But the point is, that I do not reach the point, that qfil recognizes the phone. Also not with the trick of starting with power-button/USB-cable. It constantly tries to reboot and with adb I get a message 'not authorized' .
---------- Post added at 11:17 AM ---------- Previous post was at 11:05 AM ----------
carlese said:
So guys if I try to flash unofficial CM 13 do I risk bricking the device for good???
Click to expand...
Click to collapse
I think in my case the after the first successful CM13-snapshot-installation was two fold:
1. I have not enabled USB-debugging and do not have had connected it to my computer after the first CM13-installation.
2. Due to some unknown reason the automatically update via CM itself has boot looped.
The second point is not a real problem, I think. I have had a bootloop many times before with other phones, as well as with the Zuk, but I was always able to resolve the problem with adb. I think the first point was the problem, so adb wasn't possible, due to authorization problems. The reason why qfil does not work, I really do not know exactly, but qfil in fact was not able to recognize the phone.

I have the same problem. Totally bricked.
No charge, no PC recognise, nothing.
I tried with QFIL but the PC does not recognise the port.
I don't know what else I can do. Any ideas?
Thanks!

alexisdance said:
I have the same problem. Totally bricked.
No charge, no PC recognise, nothing.
I tried with QFIL but the PC does not recognise the port.
I don't know what else I can do. Any ideas?
Thanks!
Click to expand...
Click to collapse
Sry, no I do not have

Hello!
I have dealt with this sort of problem before and have successfully un-bricked my friend's device. I will be posting a guide to solve this problem soon.
Hang-on!

LeEco Le 1 Pro (x800) Hard Brick Fix

So...you wanted to push the limit of your Le 1 Pro (x800) phone and install a newer ROM, but surprise...you bricked your phone?! Welcome to the solution...
Requirements:
-Hard-bricked Le 1 Pro, aka x800 (HARD BRICKED = Nothing comes up, no Penguin [fastboot], no Recovery)
-Windows Computer (I used Windows 7 32-bit, but Win8/10 32/64-bit should also work fine.)
-USB Type-C Data/Charge cable
-Qualcomm QPST 2.7 Build 429 (older versions such as 422 or 427 DO NOT WORK, I've tried.)
-Qualcomm Drivers
Review this link: http://www.droidsavvy.com/unbrick-qualcomm-mobiles/ (It talks about putting the computer in test mode and removing all existing drivers...either of which may or may not be required. If you run into trouble, try some of the things from this link!!)
Steps:
1) Download this zip file (contains everything you need): https://mega.nz/#!KthDlSxD!deEIr2y0PAPcPC4CHUSP2zInbBJ5VgBJpWa1B0PYhv0 (1.33GB File Size)
2) Unzip it.
3) Install "QPST.2.7.429.msi".
4) Plug-in phone and install applicable drivers from "Qualcomm_Drivers" folder (x86 = 32-bit, x64 = 64-bit).
5) From your computers applications folder, run "QFIL".
6) At the top, it should say something like "Qualcomm HS-USB QDLoader 9008 (COM3)". (If not try holding the phone's power button for maybe 5-20 seconds. If that doesn't work, see the above link about running your computer in test mode, uninstalling existing drivers, etc.)
6) Choose "Flat Build".
7) Click "Browse..." and choose prog_emmc_firehose_8994_lite.mbn from the "x1_na_dvt1_fastboot" folder.
8) Click "Load XML..." and choose rawprogram_unsparse.xml and when prompted, patch0.xml from the "x1_na_dvt1_fastboot" folder.
9) Click "Download" and let the fun begin.
FYI: Please DO NOT use the rom as-is. This is an early Chinese prototype rom, not a daily driver. Seek help/links from other users to install a different ROM. Perhaps in the future I'll have something better for you.
Disclaimer:
Apologies ahead of time if I don't have time to help you all troubleshoot. This is a complex process and although I've tried to make it easier, there will probably be some speed-bumps...like everything in life. Like you, this has already sucked up a lot of time and energy. I truly hope that those who are successful can help others! Best of luck to you!

So this is for the 64 GB US-Version?
Anyone tried it yet?

t0wlie said:
So this is for the 64 GB US-Version?
Anyone tried it yet?
Click to expand...
Click to collapse
Yes, 64GB NA version. Unknown if it works for other iterations.

Can you please upload the zip file on a most reliable site? I think is the fourth time I try to dowload it and everytime connection broke. Thank you!

Thanks a lot
Thanks a lot. I finally unbricked my phone.
However, the storage became 8gb, blue notification light is constantly on, etc.
Any suggestions how to fix them?
Installed cuoco92 rom but no success on the abovementioned problems.
Wanted to wipe internal storage when installing rom but usb otg shows 0 mb in twrp. Cannot flash zip from usb.

Sucess!!!! I debricked it! Thak you viperdream26. The phone now boots directly to recovery. Which recovery/rom did you flash? I dont want to mess this up again...

Guys please upload the zip on another site. I cannot download it using the link provided by viperdream. Thank you!

yadi.sk/d/KtcTvu6jsHA4g

Thank you!

Well, i did brick my x800 too, but i manage to instal the trwp, its working, i didnt flash any rom, but, i got it bugged instaling twrp...
Now im on recovery loop, how can i get out of this recovery and boot ?

First of all big thanks to viperdream26 !
Same here as Makvelli - 10:44.
Phone only boots in Chinese recovery and then nothing else, can't do anything in this recovery. Does anyone know how to proceed ?
I was to quick with my response ! Phone boots ok, bootanimation is absent (only LETV with underneath two Chinese lines) and the rom is multi-langual.
Rom : Build-number 0.3-20150630-20-test-keys.
Well, now phone reboots every 5 minutes !
I suppose this rom isn't the US version ?

Operation went fine and I got a successful message. Now I have the chinese LeTv recovery!

Bossie12 said:
First of all big thanks to viperdream26 !
Same here as Makvelli - 10:44.
Phone only boots in Chinese recovery and then nothing else, can't do anything in this recovery. Does anyone know how to proceed ?
I was to quick with my response ! Phone boots ok, bootanimation is absent (only LETV with underneath two Chinese lines) and the rom is multi-langual.
Rom : Build-number 0.3-20150630-20-test-keys.
Well, now phone reboots every 5 minutes !
I suppose this rom isn't the US version ?
Click to expand...
Click to collapse
I had the same problem. I put the phone in download mode (volume down and power button till I saw that peungine again). Kinda missed him since my phone was in coma for a week . Then i flashed the twrp 3.0.2 again and now I'm going to wait for maybe cuoco92 to help us with some ideas what to do next? Did anybody tried to flash his custom rom for us x800 13s?

after the restoration of this method it is necessary to update the firmware via fastboot! Firmware is here to see prices yadi.sk/d/lIMbN-bbsHRbT

oleg.cheletemov said:
after the restoration of this method it is necessary to update the firmware via fastboot! Firmware is here to see prices yadi.sk/d/lIMbN-bbsHRbT
Click to expand...
Click to collapse
Please could you explain to update with this firmware through fastboot. Thank you.

there is a video www.dropbox.com/sh/00hsiy8w99zivwm/AACh_5T7u4r08N_Guj7-rGu4a?dl=0

To get your international ROM, partition layout and everything back , just do this:
teorouge said:
Download https://www.dropbox.com/s/109hyb9w7cqnxl3/160519-x1_na_fastboot_Lang_EKL.rar?dl=0 unzip, go fastboot (power+vol up) and run the batch file x1_na_fastboot.bat. I did solve guys, good as new! Thanks @viperdream26 !
Click to expand...
Click to collapse
Cheers!

oleg.cheletemov said:
there is a video www.dropbox.com/sh/00hsiy8w99zivwm/AACh_5T7u4r08N_Guj7-rGu4a?dl=0
Click to expand...
Click to collapse
Yes !!! This is what i was searching for ! Thank you so much. My phone is alive again.

hi guys i really need your help.
i bricked my x800 yesterday and i am trying to get it back alive.
i used qfil with the given files at the right place and hit download..
qfil says com port number 5
switch to edl
download fail switch to EDL fail failed to switch to emergency download mode
finish download
please help, it is way beyond my knowledge
: i managed to get qualcomm hs-usb qdloader 9008 in qfil and i am stucked ..
download fail sahara fail sahara fail

Do we have any custom rom and TWRP for Us version? Thanks for bringing my phone back to life!

Zenfone max (Z010D).Flashed wrong rom. Device bricked. Not even starting

So, I side loaded build no. 13.8.26.76 to my phone, not knowing that it was meant only for the snapdragon 410 counterpart (mine is 615 one). It installed successfully until I rebooted and phone stayed dead. I think I hard bricked it
No logo, no charging, can't enter recovery or fastboot. No nothing... Connected device to PC, and windows doesn't recognize it.
Please help me....

sree27 said:
So, I side loaded build no. 13.8.26.76 to my phone, not knowing that it was meant only for the snapdragon 410 counterpart (mine is 615 one). It installed successfully until I rebooted and phone stayed dead. I think I hard bricked it
No logo, no charging, can't enter recovery or fastboot. No nothing... Connected device to PC, and windows doesn't recognize it.
Please help me....
Click to expand...
Click to collapse
Can you go to recovery mode ?? If yes please flash your device compatibility custom rom like RR rom ..if u cant go to even recovery mode..
RIP asus zenfone max Just Change your Motherboard of your phone
Thanks

Its dead u can recover i also had same issue ...mine works now ....email me [email protected]

Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?

MJMarra34 said:
Hello, I had a very little progress. I gave up about my asus zenfone max a year ago but glad that now looks like there's a hope in reviving my phone. I was able to download the right files to flash with QFIL. Most people here say that their PC detected QUALCOMM HS-USB QDLOADER 9008 but mine detect it as QUALCOMM HS-USB DIAGNOSTICS 9006. Due to excitement, I flashed it anyway and it created some memory partition on my hard drive whenever I plug the phone but QFIL gave me an error of :
** Download Fail: Switch To EDL Fail Failed to switch to Emergency Download Mode
I tried to google this error, some encountered it and was able to get a resolution by just removing the battery before plugging it in but our zenfone is with non removable battery. I have no luck yet. Anyone got suggestions ?
Click to expand...
Click to collapse
Check my post for detailed instructions. And yes, I did face that issue and fixed it by reinserting the battery. It's a bit risky, but worth a try. Try watching some YouTube teardown videos

sree27 said:
Check my post for detailed instructions. And yes, I did face that issue and fixed it by reinserting the battery. It's a bit risky, but worth a try. Try watching some YouTube teardown videos
Click to expand...
Click to collapse
Oh Great! do you have a link of your instructions man? thank you! so I really have to dissassemble the phone?

MJMarra34 said:
Oh Great! do you have a link of your instructions man? thank you! so I really have to dissassemble the phone?
Click to expand...
Click to collapse
It's on my profile. I haven't mentioned the disassembly part since it was not required in general cases. Check my profile for the detailed instructions

Hey Man. I'm currently working on my phone. I already tried removing the battery but I'm still getting the error:
Download Fail: Switch to EDL Fail.
hopes are going narrow. Now I don't know what to do.

MJMarra34 said:
Hey Man. I'm currently working on my phone. I already tried removing the battery but I'm still getting the error:
Download Fail: Switch to EDL Fail.
hopes are going narrow. Now I don't know what to do.
Click to expand...
Click to collapse
Are you on fastboot mode? What is on your display?

Im still at the part with the QFIL. Im retrying it right now bruh.. hmmm

MJMarra34 said:
Im still at the part with the QFIL. Im retrying it right now bruh.. hmmm
Click to expand...
Click to collapse
If you're having trouble with QFIL, best thing to do is uninstall Qualcomm drivers, reboot, reinstall, try again. Repeat until you can flash without problem.
I had to uninstall many times. Don't lose hope. It takes a lot of effort

hey Sree. I noticed that it is being detected as Qualcomm HS-USB diagnostics 9006. So what I did is I forced driver to install Qualcomm HS-USB QDLoader 9008. I'm now having a Sahara error. I'll try reinstalling drivers but I have a quastion. Does QFIL version matter ?

MJMarra34 said:
hey Sree. I noticed that it is being detected as Qualcomm HS-USB diagnostics 9006. So what I did is I forced driver to install Qualcomm HS-USB QDLoader 9008. I'm now having a Sahara error. I'll try reinstalling drivers but I have a quastion. Does QFIL version matter ?
Click to expand...
Click to collapse
I don't know. I used the latest one. Try the version linked in my original post. Also, of you're getting sahara fail, it's ok. You're on right track. Uninstall driver, reboot and reinstall. It'll take hell a lot of tries, but will work eventually

My Phone Wont Turn On

Hi guys anyone can help me? My phone wont turn on after I Accidentally Installed a Custom Rom that doesnt support my phone. What should I do? Need help.

itsme.Ronjie said:
Hi guys anyone can help me? My phone wont turn on after I Accidentally Installed a Custom Rom that doesnt support my phone. What should I do? Need help.
Click to expand...
Click to collapse
Ok, in detail please tell me the steps you've taken and which custom rom specifically.

+)KEV1N(+ said:
Ok, in detail please tell me the steps you've taken and which custom rom specifically.
Click to expand...
Click to collapse
sir Kevin. I accidentally installed wrong ROM which is for Zen3 552kl on my Ze553kl. And now my phone wont boot. What should I do? Tried some QFIL and I get some errors "Sahara Failed"

itsme.Ronjie said:
sir Kevin. I accidentally installed wrong ROM which is for Zen3 552kl on my Ze553kl. And now my phone wont boot. What should I do? Tried some QFIL and I get some errors "Sahara Failed"
Click to expand...
Click to collapse
Are you able to boot into your bootloader?
(Hold power button + volume down while booting)

+)KEV1N(+ said:
Are you able to boot into your bootloader?
(Hold power button + volume down while booting)
Click to expand...
Click to collapse
I cant. Just black screen. No vibrations when holding the power button. But when i connect it to pc it shows QUALCOMM HS-USB 9008 QDLOADER 9008. Tried some QFIL but I getting some errors with Sahara Fail.

itsme.Ronjie said:
I cant. Just black screen. No vibrations when holding the power button. But when i connect it to pc it shows QUALCOMM HS-USB 9008 QDLOADER 9008. Tried some QFIL but I getting some errors with Sahara Fail.
Click to expand...
Click to collapse
Firstly, if I may ask, which ROM are you using?
Secondly, I believe the ROM provided in the following thread may be of help:
https://forum.xda-developers.com/zenfone-3-zoom/how-to/transfer-cn-rom-to-ww-rom-ze553kl-t3612990
You should be able to find the required files in that ROM.
If the program asks you for 3 files It should be in the following order:
Programmer file: prog_emmc_firehose_8953_ddr.mbn
Raw file: rawprogram0.xml
Patch file: patch0.xml
I won't be able to reply as much during weekdays, so if you need any consultancy, you can read from this thread:
https://forum.xda-developers.com/zenfone-2-laser/general/unbrick-guide-z00l-ze550kl-t3600527
I wish you best of luck with the unbricking process and I'll look forward to the results.

+)KEV1N(+ said:
Firstly, if I may ask, which ROM are you using?
Secondly, I believe the ROM provided in the following thread may be of help:
https://forum.xda-developers.com/zenfone-3-zoom/how-to/transfer-cn-rom-to-ww-rom-ze553kl-t3612990
You should be able to find the required files in that ROM.
If the program asks you for 3 files It should be in the following order:
Programmer file: prog_emmc_firehose_8953_ddr.mbn
Raw file: rawprogram0.xml
Patch file: patch0.xml
I won't be able to reply as much during weekdays, so if you need any consultancy, you can read from this thread:
https://forum.xda-developers.com/zenfone-2-laser/general/unbrick-guide-z00l-ze550kl-t3600527
I wish you best of luck with the unbricking process and I'll look forward to the results.
Click to expand...
Click to collapse
im using the WW ZE553KL Rom. I do have that 3 files but im getting an error in QFIL.

+)KEV1N(+ said:
Firstly, if I may ask, which ROM are you using?
Secondly, I believe the ROM provided in the following thread may be of help:
https://forum.xda-developers.com/zenfone-3-zoom/how-to/transfer-cn-rom-to-ww-rom-ze553kl-t3612990
You should be able to find the required files in that ROM.
If the program asks you for 3 files It should be in the following order:
Programmer file: prog_emmc_firehose_8953_ddr.mbn
Raw file: rawprogram0.xml
Patch file: patch0.xml
I won't be able to reply as much during weekdays, so if you need any consultancy, you can read from this thread:
https://forum.xda-developers.com/zenfone-2-laser/general/unbrick-guide-z00l-ze550kl-t3600527
I wish you best of luck with the unbricking process and I'll look forward to the results.
Click to expand...
Click to collapse
Still not fix ?

+)KEV1N(+ said:
Firstly, if I may ask, which ROM are you using?
Secondly, I believe the ROM provided in the following thread may be of help:
https://forum.xda-developers.com/zenfone-3-zoom/how-to/transfer-cn-rom-to-ww-rom-ze553kl-t3612990
You should be able to find the required files in that ROM.
If the program asks you for 3 files It should be in the following order:
Programmer file: prog_emmc_firehose_8953_ddr.mbn
Raw file: rawprogram0.xml
Patch file: patch0.xml
I won't be able to reply as much during weekdays, so if you need any consultancy, you can read from this thread:
https://forum.xda-developers.com/zenfone-2-laser/general/unbrick-guide-z00l-ze550kl-t3600527
I wish you best of luck with the unbricking process and I'll look forward to the results.
Click to expand...
Click to collapse
Still not fix :crying: