How do I rollback to RealmeUI 1.0?
Found out the answer myself in https://c.realme.com/in/post-details/1393411074392449024
FAQ:
Click to expand...
Click to collapse
Q1 - Why haven’t I received the Stable release?
A - Once again, this is a phased roll out and will be available to all the users very soon. Kindly be patient and wait for the update on your device.
And for the beta user(Early Access/ Open beta) you will directly receive the Stable Release for the first time.
Q3 - Why my device can not access the data file in File manager after update to latest realme UI 2.0 version?
To protect user data security and privacy,Android 11 does not allow apps to access each other's file directories，that’s why the access [Android/data] is now restricted on Android 11（realme UI 2.0）, not even the built-in realme file manager can access it.
Q3 - How to roll back to Android 10 ?
A - Note:
1.Your personal data will be erased when you roll back.Please back up your data before your operation.
2.You can’t be back to the Early Access version once you roll back.
3.You need manual update the latest realme UI 1.0 version if you lost some pre-install app
Step 1: Download the roll back package in your phone and remember the location.
(The package will update in time in this thread,please keep an eye on it)
Link: realme 7i roll back_O
https://download.c.realme.com/flash/Rollbackpack/realme_7i/RMX2103PU_11_OTA_0430_all_W1nRl1NF0XCR.ozip
Step 2: Enter recovery mode to roll back:
Turn off your phone-->Long press the volume down and power buttons at the same time enter recovery mode-->Choose the language -->Install from storage--> Input your screen locked password-->Find & tap the rollback package to go back to the previous version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Related
[Read before proceeding]
This root method will only work on MetroPCS version of the LG Leon! Do test other devices at your own risk[not held liable]
Requirements:
Android Version: 5.1.1 *not so sure for eairler versions of Lollipop*
Software Version: MS34510f and Under
Enough space for app extraction [About 50MB]
Like always, before modifying the system MAKE A BACKUP!
I WILL NOT BE HELD RESPONSIBLE IF ANYTHING GOES WRONG WITH YOUR DEVICE! PROCEED WITH CAUTION!
Hello guys,
By far, for me this is one of the most simplest ways of rooting this phone. Lets get started
BTW All Downloads Below
1. Download KingRoot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Extract ZIP package with app desired or use a desktop, then place files onto phone
3. install the APK, and ignore any warning pop-ups
4.Open the app upon completion of app
5. You will be presented with the main screen saying no root avaliable, CLICK ON TRY TO ROOT
6. App will now start executing root
*May be slow so give it time
*Make sure to allow blocked apps if presented with a pop-up
7.If all went well you will be presented with a ROOT SUCCESSFUL screen OR phone will restart and you will have root
***At this point DO NOT request or run any apps that require root until the device is restarted.
8. Enjoy Root!
-If root is not accessible upon restarting, go into KingUser Su and click on REPAIR ROOT
-I do not know how to replace KingUser with SuperSU Sorry!
Goodluck!
Proof:
KingRoot APK: https://drive.google.com/file/d/0B9y1pDvJBE4nVk4wYlhCNjc4UkE/view?usp=sharing
KDZ Firmware MS34510f(METROPCS ONLY) : https://drive.google.com/file/d/0B9y1pDvJBE4nTEFFLXFraDgxOTg/view?usp=sharing
Firmware can be used for recovery purposes, a backup, and here for convinience!
I am not responsible for anything that may happen to your phone as a result of installing custom roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
Click to expand...
Click to collapse
Description:
This ROM is based on 32Bit stock rom.
ROM is based on Smartisian OS 2.6.2 , It 's an Experience Edition
Fix audio camrea sensor compass and so on.
LTE/3G/GMS call data_network and communication module works well.
WIFI BT works.
SuperSU root.
Readjust the Launcher Resolution.
Add Easytouch .
Language:English Support.
Very Very Important:
After power on the devices , plz launch EasyTouch app.
Then, open Settings --- Advenced Settings --- Auxillary Functions --- EasyTouch --- On .
SmartisanOS Official Introduction ( Recommend ):
http://www.smartisan.com/jianguo/#/os
Known Issues:
No critical bugs.
BUG report & about me：
Facebook
Twitter
Google+
Downloads(all version):
[SmartisanOS] released on KingFlasher !!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Install Method:
Recommend to use King Flasher: http://tfile.kingflasher.com/soft/kingflasher_setup.exe
1. Connect your phone to computer with USB cable and open USB debbuging.
How to open USB debbuging: Settings > About device > Tap “BUILD MUNBER” 7 times > Back to Settings > Developer options > Select “USB Debbuging”.
2. Please open King Flasher and choose a ROM you like, then click “Flash”.
3. Wait for downloading ROM.
4. After the download finished, King Flasher will flash your phone automaticlly. It will take about 5-10 minutes to finish.
5. Your phone will reboot to the new system when it finish.
link?
can you provide me the link?
Enabling OTG in Honor 5C - Elaborated version of http://forum.xda-developers.com/honor-5c/development/activation-support-otg-applications-t3471686 by @DRUGER
Files Credits: @BadWolfYe
NOTE:
-> Rooting may void your phone warranty, and you won’t claim it back.
-> Follow the steps correctly otherwise you may brick your device. We are not responsible for any damage of your phone.
-> Ensure that your phone has at least 50-60% charged to prevent the accidental shutdown in-between the process.
_______________________________________________
REQUIREMENTS(MUST)
1. Should have a custom recovery installed.
2. Should be rooted and SuperSu installed.
[Files needed to install custom recovery and flash Supersu in one package here: http://bit.ly/RootH5C ]
----------------------------------------------------------------------------
PROCEDURE
1. Boot in to recovery and Choose Install and flash the file below through twrp:
http://bit.ly/OtgActivatorH5c
2. After installation Clear "dalvic cache" and reboot the system.
3. The reboot takes time(5-10minutes),so donot interfere the boot.
4. After bootup,install the apk below:
http://bit.ly/OtgConnectH5C
and Grant SuperSu access that gets prompted.
5. Now connect any pendrive via otg cable and Click "Connect OTG" button in the app.
6. To Disconnect Click "Disconnect OTG" button.
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit to Aravind M Nair from Honor India
Original Post from Honor India - https://club.hihonor.com/in/honor5c.269/how-to-enable-otg-support-in-honor-5c-neml22.12713
Having conceived you duplicate already created subject???
http://forum.xda-developers.com/honor-5c/development/activation-support-otg-applications-t3471686
DRUGER said:
Having conceived you duplicate already created subject???
http://forum.xda-developers.com/honor-5c/development/activation-support-otg-applications-t3471686
Click to expand...
Click to collapse
Oops. Sorry. I was checking at the guides section, there were no such posts. That's why posted it from Honor India FB page.
DRUGER said:
Having conceived you duplicate already created subject???
http://forum.xda-developers.com/honor-5c/development/activation-support-otg-applications-t3471686
Click to expand...
Click to collapse
Added your post as reference. I didn't find this before posting it. That's why.
OMG. Found the same thing here - http://forum.xda-developers.com/honor-5c/development/guide-enable-otg-support-honor-5c-t3518852
vsriram92 said:
OMG. Found the same thing here - http://forum.xda-developers.com/honor-5c/development/guide-enable-otg-support-honor-5c-t3518852
Click to expand...
Click to collapse
And thats mine...
Hello....can u help me
Hello guys.
What is the status about the root / bootloader unlock for Axon 7 running nougat?
these are the specs of my phone right now, and to be honest, after many years of being an iPhone owner I feel kinda lost regarding the root techniques.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WizeMan said:
Hello guys.
What is the status about the root / bootloader unlock for Axon 7 running nougat?
these are the specs of my phone right now, and to be honest, after many years of being an iPhone owner I feel kinda lost regarding the root techniques.
Click to expand...
Click to collapse
NP just read Controllerboy's guide if you have an A2017G.
But before that, be warned about 2 things:
Your data will be wiped after you unlock the bootloader, and if you unlock it you'll probably be wiping and trying ZIPs every once in a while, so get used to backing up stuff and using Google for contacts etc.
That guide was for Marshmallow I think. You can download version B10 or B11 from ZTE's website, then unpack it until you get an update.zip (it should come as a zip with a bunch of numbers, and inside it there's a zip matrioska'd inside). Put it on the root of your internal storage (root means outside of any folder) and go to Settings the Updates. It should find the zip and install it. After that go to Developer options (to enable it go to About phone and tap Build number a buncha times, then it should appear above About phone) and enable Enable OEM Unlock. Now you have Marshmallow and can use the guide.
Another way is doing all the procedure up there but using axon7toolkit instead of that guide. Never used it for this procedure but it should work just fine and do the same. You can get more experience from using the guide though, and that experience may come in handy if you ever tinker too much
Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me
any help?
Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse
Can I switch to a different luacher or operating system?