MI TV P1 bootloop - Android TV General

Hello!
I'm having a problem with the MI TV P1 that i just bought recently.
After i turned it on and finished the setup, it went into bootloop as soon as it showed the home menu as in the video.
I tried changing power source and plugs, but to no avail.
Is there any other fix that i can do?
Thank you!

try to press and hold enter & back button while power on

Related

Bricked Nexus 4

Hi guys,
I recently replaced the LCD and digitizer of my Nexus 4. After I booted it up, the new screen worked fine and it booted upto the paranoid android boot animation and was stuck there. I left it unattended for some time and when I came back the screen was black. Now when I connect it to my PC, I don't even here the USB detection sound.
Have I bricked my phone permanently? Or is there any fix to this?
Thanks in advance.
Check if the recovery is working. Make sure N4 is turned off, and then press vol+, vol-, and power button together. If the menu turns on, you can get to recovery and flash new ROM. At least I would try doing that.

Force turn off Lenovo Vibe P1

We all know how to force restart Vibe P1 which is by holding down the power button for 10 seconds..
But say you're in a boot loop or a forced recovery or a diagnostic mode and you want to unbrick the phone using Qfil..
Now you can wait for the phone to completely discharge and it will turn off by itself..
But I found another way by accident..
Steps:
1- hold both power button along with vol down button for 10 seconds to make the phone restart (this works anywhere.. in Android or recovery or bootloop) and don't remove your fingers
2- keep the buttons pressed while the phone is restarting it will boot to the green "Lenovo" logo and after a second it will power off.. you can lift your fingers now
3- now you can hold volume up and connect the phone to PC to flash stock rom with qfil or hold power and volume down to go to qualcomm test mode or hold power and volume up and down to go to recovery..
Please test if it works for you.. I tested it on my P1a42..
In Lenovo P2 it goes a little differently..
1- Do step 1 from above.. keep the buttons held when restarting until you see a black screen saying "AP fastboot flash mode"
2- Press the vol down button once until you see the word "power off" on screen.. press power and the phone will turn off.
3- Proceed to step 3 as above
Tested and working!!
Thanks for this one adhammagdy.:good:
I was stuck in a bootloop and this one helped me turn my phone off and I successfully flashed with qfil to restore my phone.
Just a quick addition for clarity...
After step 4, the phone kept bootlooping even after the volume down and power buttons were kept pressed.
Once we reach this stage, we need to release both the keys simultaneously when the screen goes dark in between. Then the phone will stay turned off and we can proceed as given in step 5.
renjujvcool said:
Thanks for this one adhammagdy.:good:
I was stuck in a bootloop and this one helped me turn my phone off and I successfully flashed with qfil to restore my phone.
Just a quick addition for clarity...
After step 4, the phone kept bootlooping even after the volume down and power buttons were kept pressed.
Once we reach this stage, we need to release both the keys simultaneously when the screen goes dark in between. Then the phone will stay turned off and we can proceed as given in step 5.
Click to expand...
Click to collapse
Thanks, updated OP with an easier method...

I need help on urgent basis

I need help on urgent basis
I'm using Mi A1 rooted with custom kernel, My phone automatically received august update and it's installed automatically then i try to go in download mode to flash my phone with stock rom but i didn't press volume button properly and it's get restart and automatically start installing august update and i by mistake press power button and now my phone is not turning on even not showing any logo and not detecting in pc as well
i tried to hold power button more then 30 second and 1 or 2 minutes but not turning on power
please help me

problem

Hello guys, I have a problem with the Red Magic 5G device. I was in recovery mode and I pressed the bootloader mode and the device turned off and I could not restart it completely and it does not accept working with the power button and volume down, nor through the computer or any other way
Please help me

My redmi TV 86 max - L86R6, cannot go into recovery mode

After installing the launcher, I reset my TV but it restarts again and again. I have tried the OK + back button or home + menu button but cannot boot into recovery mode after plugging in. Here is the video, Does anyone have solution?
anyone?

Categories

Resources