Ok here is super easy and classic method for flashing/booting TWRP.
I use TWRP for trying root and Gapps install. (Currently no success)
DO A BACKUP BEFORE DOING ANYTHING !
MAKE A BACKUP !!
BACKUP VIA TWRP !
Dont forget to backup !
How to flash - boot ;
WHILE THERE IS NO STOCK FLASH FILE FOR NUBIA I HIGLY SUGGEST TO USE BOOT OPTION INSTEAD OF FLASH OPTION !!!
Download the "sw1003.img" file below.
Connect ZTE Nubia Watch to your PC
Run following commands below
adb reboot bootloader
fastboot oem nubia_unlock NUBIA_SW1003
fastboot boot sw1003.img
Click to expand...
Click to collapse
Hi, I confirmed this procedure is working, see photo attached.
I did also backup in TWRP, it was success but i cannot find it in my storage. Can you please advise where can i find the backup? Also, can you please advise what application I can install in my watch. Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Follow up: I can see that the storage have been filled but I cannot find the TWRP backup.
I did enable the show hidden files but still it's not showing any folder.
any luck on this? i Managed to run twrp, all functions work in twrp, i even sideload supersu AND what got me excited, on the stock recovery screen, it shows device root: 1 however i am unable to access the supersu app once booted or install playstore / twrp app
Can Nubia Watch install an .apk app?How to do ?Thanks.
still waiting for someone to try.
Thanks for TWRP and Calendar launch er(Slim launcher) for nubia alpha watch thread.I can install apk by using TWRP Template zip file and launch by Calendar launcher.
chutsanova said:
Thanks for TWRP and Calendar launch er(Slim launcher) for nubia alpha watch thread.I can install apk by using TWRP Template zip file and launch by Calendar launcher.
Click to expand...
Click to collapse
Hello, can you please explain how you did it, can you make tutorial? appreciate it.
CaLix25 said:
Hello, can you please explain how you did it, can you make tutorial? appreciate it.
Click to expand...
Click to collapse
+1 here
CaLix25 said:
Hi, I confirmed this procedure is working, see photo attached.
I did also backup in TWRP, it was success but i cannot find it in my storage. Can you please advise where can i find the backup? Also, can you please advise what application I can install in my watch. Thanks.
View attachment 5384905View attachment 5384907
Click to expand...
Click to collapse
Bro, tutorial pls
The apps install, but don't work. In ADB mode I send them in Zip format that can be installed on the clock, then I install them in TWRP. I will continue to test what applications can work.
Kiwat said:
The apps install, but don't work. In ADB mode I send them in Zip format that can be installed on the clock, then I install them in TWRP. I will continue to test what applications can work.
Click to expand...
Click to collapse
Bro, at list write a procedure of what you did, you are near. I hope someone can help us here because this Nubia wear is no longer updating its app in playstore. Appreciate your effort.
CaLix25 said:
Bro, at list write a procedure of what you did, you are near. I hope someone can help us here because this Nubia wear is no longer updating its app in playstore. Appreciate your effort.
Click to expand...
Click to collapse
Tomorrow I upload the steps to follow, I have not continued trying with other applications. Applications must be installed using TWRP in Zip format. The Zip can be created or I can also upload the file and it would only be to put the APK you want to install inside the Zip.
Kiwat said:
Tomorrow I upload the steps to follow, I have not continued trying with other applications. Applications must be installed using TWRP in Zip format. The Zip can be created or I can also upload the file and it would only be to put the APK you want to install inside the Zip.
Click to expand...
Click to collapse
Thank you bro., appreciate it. It would be easy to everyone also if you will mention the below:
1. The procedure you did
2. The app you installed
Again, thank you.
I made a full backup. maybe someone can do something with this.
Hello sir can help me after i restore image error i booster now error i can't connect to pc
Who can help me drive watch ?
TounSovanreach said:
Who can help me drive watch ?
Click to expand...
Click to collapse
Same issue herw
Nubia watch not detected in windows PC and no adb. Any tutorial much appreciated?
Related
Root FJ10 Without Custom Kernel
As we all know FJ10 has been released and is floating around the internet, and iv'e decided to share the way i rooted the leak (International SGS II) using stock samsung recovery
Credits
Chainfire CWM-Supersu
Sextape Leakrwilco12 Continue to hosting leak
What you need
PC/MAC/Linux
ADB
USB Cable
Phone
CWM-SuperSU-v0.97.zip
There is two ways to flash the root package in custom recovery (sorry i keep forgetting the other way)
Thank You Sh4Dy for reminding me
Flash Trough Update
1) Download CWM-SuperSU-v0.97.zip
2) Rename CWM-SuperSU-v0.97.zip > update.zip
3) flash as an update
Instructions
1) Enter Recovery mode by holding power+volume up.
2) Connect USB Cable to the phone and PC
3) Choose Install Update with adb
now
4) Now in your terminal/CMD write adb sideload CWM-SuperSU-v0.97.zip
5) Look at the screen and you will see the update package being installed
Congratulations you got now a rooted FJ10 leak without flashing a custom kernel
Proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks, but I get stuck at 3.
I go to search -> cmd and then I type adb sideload CWM-SuperSU-v0.97.zip in it. I think this is wrong but I never worked with ADB.
how it works now? i don't get it also
dajumper said:
how it works now? i don't get it also
Click to expand...
Click to collapse
Works fine here
You need to install adb then cd to the adb directory, then type the command.
Why is it even in dev section?
Spyr0s said:
Works fine here
You need to install adb then cd to the adb directory, then type the command.
Click to expand...
Click to collapse
Will try that tomorrow!
Verstuurd van mijn GT-I9100 met Tapatalk
dajumper said:
how it works now? i don't get it also
Click to expand...
Click to collapse
Make sure you have adb installed on your pc
after that begin with step 1
Doesn't work at 4th step for me, I check devices in adb devices and it shows my device but some large-ass thing comes n it doesn't install the SuperSU zip for some reason
Same thing here
wrong thread. plz delete
ssilviu said:
Same thing here
Click to expand...
Click to collapse
did you also use the supersu provided in op?
Sh4Dy said:
Doesn't work at 4th step for me, I check devices in adb devices and it shows my device but some large-ass thing comes n it doesn't install the SuperSU zip for some reason
Click to expand...
Click to collapse
did you use: http://download.chainfire.eu/267/SuperSU/CWM-SuperSU-v0.97.zip
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
Edit: Yes mate, I used that file only, you copied it from Sprint S2's JB thread? Coz I can see the screenshot is of Oct 11 firmware.
Sh4Dy said:
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
Edit: Yes mate, I used that file only, you copied it from Sprint S2's JB thread? Coz I can see the screenshot is of Oct 11 firmware.
Click to expand...
Click to collapse
yes i did, as i know this will work with it too
Buy mobile odin, flash the rom, then you will get root. Quite simple.
I love new rom.
But it wipe all my data system apps...
bogdan1980 said:
Buy mobile odin, flash the rom, then you will get root. Quite simple.
I love new rom.
But it wipe all my data system apps...
Click to expand...
Click to collapse
that isn't mobile odin problem, its wiped automatically
Yeh man, it should work with this too, but idk, flashing zip did the job for me. Try it yourself
Sh4Dy said:
Hey guys, Just apply the .zip from external card via recovery, the .zip in OP, worked for me
.
Click to expand...
Click to collapse
failed to mount sdcard
Sh4Dy said:
Yeh man, it should work with this too, but idk, flashing zip did the job for me. Try it yourself
Click to expand...
Click to collapse
i added your instructions to OP and added you as credit for reminding me :highfive:
ssilviu said:
failed to mount sdcard
Click to expand...
Click to collapse
This is why adb sideload is powerful (as on sprint we were never able to access sdcard)
If you want, I can give proof, I'm currently restoring apps from Ti Backup Pro
CENTER]Head to the Main thread for full feature list
http://forum.xda-developers.com/showthread.php?t=2201860[/CENTER]
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something.
I have tested maximum stuff and it works fine
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
InstructionFlash the recovery via sp flash tool(RECOMMENDED)
Can use Mobile uncle tools from PlayStore also.
DownloadCustom Kernel Thread : http://forum.xda-developers.com/android/general/kernel-xpro-custom-kernel-micromax-a120-t2977089
Credits
@Phil3759 Main developer Source
@yuweng For his tutorials
@mr-illusionist For testing
Is this a KITKAT recovery?
Yes jellybean as well as KitKat
Hi.
Thank you for this good recovery! I'm using it from this rom: http://forum.xda-developers.com/android/general/rom-wiko-kitkat-rom-mmxa120-clones-t2981756
But, I have found two bugs:
1) USB don't work at all. It's possible to fix it? I like to have ADB access in the recovery.
2) The option for "Re-root System (superSU)" don't work. I executed it multiple times, boot to Android, download SuperSU, but then the program says "no su binary available". You know why this function don't work?
Regards!
manos78 said:
Hi.
Thank you for this good recovery! I'm using it from this rom: http://forum.xda-developers.com/android/general/rom-wiko-kitkat-rom-mmxa120-clones-t2981756
But, I have found two bugs:
1) USB don't work at all. It's possible to fix it? I like to have ADB access in the recovery.
2) The option for "Re-root System (superSU)" don't work. I executed it multiple times, boot to Android, download SuperSU, but then the program says "no su binary available". You know why this function don't work?
Regards!
Click to expand...
Click to collapse
SuperSu will not work as i have removed su binary to reduce size of the recovery. And about adb access I dont have device so didnt try will confirm with someone
Siddhesh.K15 said:
SuperSu will not work as i have removed su binary to reduce size of the recovery. And about adb access I dont have device so didnt try will confirm with someone
Click to expand...
Click to collapse
Ok,
So please, can you publish two different versions? One with su binary and one without. Then the user can select if it's partition maps has sufficient space.
Related to USB port. How I can access to shell with this recovery? From the mobile, from USB, from wifi, or whatever... ?
manos78 said:
Ok,
So please, can you publish two different versions? One with su binary and one without. Then the user can select if it's partition maps has sufficient space.
Related to USB port. How I can access to shell with this recovery? From the mobile, from USB, from wifi, or whatever... ?
Click to expand...
Click to collapse
I would have never removed su if the recovery partions is of size more than 6 mb but unfortunately it is of 6mb only and su binaries in recovery are old u can SuperSU zip and get root access LINK
If you are using kk rom then i will advice u to use Superuser instead of supersu. because supersu fails to elivate some permissions in mtk kk roms.
And for access try usb otg
Siddhesh.K15 said:
I would have never removed su if the recovery partions is of size more than 6 mb but unfortunately it is of 6mb only and su binaries in recovery are old u can SuperSU zip and get root access LINK
If you are using kk rom then i will advice u to use Superuser instead of supersu. because supersu fails to elivate some permissions in mtk kk roms.
And for access try usb otg
Click to expand...
Click to collapse
Ok,
Related to SuperSU, I recommend to remove the option in the recovery or put a mode when the su binary is loaded from the SD card, like the load of the Aroma FileManager.
In reference to USB, don't work at all! If I try in the Philz to enable "usb otg" it don't work. What I can do?
Thank you!
Hi,
Because no posts about fixing the USB problem. Plase, can the author publish the source code of this port?
Thank you!
I'm a newbie in flashing roms, it will be very helpful some one to do a full tutorial of most of the ways for flashing rom for example =>flashing a custom rom, upgrading, downgrading , recovery, going from KK to lolipop, for people like me it will be extremely useful and to have full forum we needed more treads , this will be great start!
Download the desired rom.
Download the latest flash tool: I can not post links yet
Run the file of Flash_tool.exe in the tool folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.Run Flash Tool，click Scatter –loading to choose the file of Scatter in the rom，and then click D or double click the file
2.Click “Download Only”，to choose“Firmware-upgrade”
To check DA DL
Click options-----download----Check DA DL All with checksum
Click download
Then turn off the phone and connect to the computer, then it will download to the phone
Bangsat86 said:
Download the desired rom.
Download the latest flash tool: I can not post links yet
Run the file of Flash_tool.exe in the tool folder
1.Run Flash Tool，click Scatter –loading to choose the file of Scatter in the rom，and then click D or double click the file
2.Click “Download Only”，to choose“Firmware-upgrade”
To check DA DL
Click options-----download----Check DA DL All with checksum
Click download
Then turn off the phone and connect to the computer, then it will download to the phone
Click to expand...
Click to collapse
Most of the roms for jiayu s3 can be found here... http://www.needrom.com/category/jiayu/s3-jiayu/ Thanks for helping!
Sp-Flash tools=> https://yadi.sk/d/3niZ3G1Ye9QR9
Thanks for the info above, is there a tool or set of instructions that can be followed on a mac?
Don't know man sry..!
Sent from my JY-S3 using XDA Free mobile app
scatter.txt
Bangsat86 said:
Download the desired rom.
Download the latest flash tool: I can not post links yet
Run the file of Flash_tool.exe in the tool folder
1.Run Flash Tool，click Scatter –loading to choose the file of Scatter in the rom，and then click D or double click the file
2.Click “Download Only”，to choose“Firmware-upgrade”
To check DA DL
Click options-----download----Check DA DL All with checksum
Click download
Then turn off the phone and connect to the computer, then it will download to the phone
Click to expand...
Click to collapse
Hello,
when i click on "scatter loading" i don't get a file with scatter.txt.
Can you help me out please?
Thanks,
Alex
Problem with program
iOceanAlex said:
Hello,
when i click on "scatter loading" i don't get a file with scatter.txt.
Can you help me out please?
Thanks,
Alex
Click to expand...
Click to collapse
When flashing my smartphone I get an error (S_DA_EMMC_FLASH_NOT_FOUND)
Can I copy the scatter.txt from RC5 to whichever ROM i want as long as it is for the same phone? Basically I have the RC5 but I experienced that the battery is horrible so I wanted to try a different newer OS. Somehow there is an error installing via TWRP the other roms I have in zip but flashtool works fine. These files do not have a scatter-file though.
Thank`s for the instructions
I will thank for the instruction, because I breaked my phone while trying to flash madOS 8.1.0 (update from april). Before my Jiayu S3 basic (16 GB, 2 GB) worked fine with madOS 8.1 from 2017-12-30. I surely made a big mistake, therefore the phone was dead - no reaction any more.
I found this solution to flash back the stock rom 5.1.1 with twrp. Phone is alive and works.
I think, I have done a big mistake, because all trials to flash madOS 8.1 from april ended with boot into TWRP. I tried flashing to madOS for a long time, isn`t possible any more. Maybe also my old phone has a failure.
Therefore I have to thank for Your excellent work. Thanks.
Hi!
I'm trying to flash my S3Adv. (3GB RAM, Kitkat, TWRP 2.8.4.0) with madOS_8.1.0_s3_h560_20180422.zip, but, the "Zip signature verification failed". Before, the MD5 sum is checked and matches. I also checked the file with "zip -T" on my Linux machine and it reports "OK". When the "Zip file signature verification" is turned off, TWRP reports "error executing updater binary in zip ..." What's going wrong? Anybody here who can help?
Thanks in advance
Frank
Nearby: I wiped system, dalvik, cache and data.
Solution:
- Install Flash Tool
- Flash Android 5.1.1 (RC5_S3_16GB.zip)
- Start 5.1.1 to do a basic configuration
- Boot into TWRP recovery which was included in RC5
- Install twrp_20180417.img
- Boot into TWRP recovery
- Install madOS_8.1.0_s3_h560_20180422.zip
(a full wipe is, may be, necessary, but, I don't know, when the full wipe should be done within my procedure - I did it earlier)
Welcome to fRomFuture
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Base B179
Busybox
prerootet with Magisk
Viper4Android
light debloadet
VoLTE (if you provider support it)
More clone apps
3D Panorama Camera
Install when you coming from Stock encrypted:
Backup your Data
Unlock bootloader
install TWRP (Download)
Backup Stock with TWRP (System,Cust,Version,Product,Vendor, OEM Info)
Wipe System,Cust,Version,Product,Vendor in TWRP
Format Data Partition (type YES)
Copy Rom and Data Files to your Phone
install Rom
L29C432 can reboot now
install Data Files L09C432
Reboot and have fun
Install when you coming from Custom Rom decrypted:
Backup Data with TWRP
Wipe System,Cust,Version,Product,Vendor in TWRP
install Rom
L29C432 can reboot now
install Data Files L09C432 (B164 is fine)
Reboot and have fun
Its only tested with VTR-L29C432xx so if you want this Rom please rebrand to L29C432!
Klick here to rebrand
DOWNLOAD B179 - Magisk
Spoiler
DOWNLOAD B164 SuperSu
DOWNLOAD B164 Magisk
Datafiles B164
Datafiles L09 B164
Some user lost all data from internal storage while they update magisk!
Take care and make a backup before you update magisk.
Androidfilehost dont have a P10 Folder yet. So its ok downloading this file
A very big thanks to @funiewski for a lot of testing :good:
Credits to:
tecalote
tkkg1984
chainfire
guitardedhero
Disclaimer: I will not take any responsibility for anything wrong happen to your device. Do it at your own risk.
only for dual sim version?
Yes. Maybe later a L09 Version.
Are there any solution for us to solve these probelms ?
@Blackball - is SuperSu you use in this rom modified in any way?
What problems? @Jamsserty
@funiewski
Yes it's modified
Blackball said:
What problems? @Jamsserty
@funiewski
Yes it's modified
Click to expand...
Click to collapse
During testing when I flashed back to stock b164 I used unmodified Ssu beta 3 for rooting, there is one user in Ssu beta thread who has problems with latest beta on his p10. What kind of modification if I may ask?
A friend of mine made the modifications. (@tecolate) take a look here:
https://forum.xda-developers.com/showthread.php?t=3612258
Blackball said:
A friend of mine made the modifications. (@tecolate) take a look here:
https://forum.xda-developers.com/showthread.php?t=3612258
Click to expand...
Click to collapse
huawei should have a cross development forum thread like sony devices, it would be easier to find relevant information, I have to flash back to stock and root with beta 3, I don't remember any problems on my side, he has problems with security(pin code, fingerprint).
Hi There.
Succesfully installed. I have issues with the Gallery.. If I open it it says insufficient storage space....
Also MiXplorer shows what looks like encrypted folders in the Internal Storage section???
Any help would be appreciated.
Did you format your data partition before you flashed this?
Pretty nice
So it seems that installing and flashing Huawei devices is quite the hassle.
Issues I currently experience on this ROM:
Cannot open Gplay not opening.
Plugging in usb cable into windows or linux doesn't get recognised.
I will update with more details later today
update:
reformatted /data /system and reinstalled, no more issues!
Rom works fine, as fine as could be expected of a rooted stock rom.
Here is a script for L09 User.
Just install Rom and Data Files from start post and then this zip file.
Its untested because my tester have only L29 devices. But it should work.
https://www.androidfilehost.com/?fid=889764386195923928
Hello
How i can activate voLTE?
Added Magisk Version.
Have fun.
A very big thanks to @funiewski for a lot of testing
Have installed and all is working great. There's only 1 issue that I'm facing. The first time I change my wallpaper on the homescreen, there are many lines that will appear on the wallpaper. Anyone facing this? The lockscreen and app drawer area is fine. Anyone can advice? I would prefer my home screen wallpaper to be clean.
Blackball said:
Did you format your data partition before you flashed this?
Click to expand...
Click to collapse
Yeah that was it... Figured it out myself... Realised I missed something somewhere.
So far the Rom is running great!
When I open Magisk Manager and try to install Magisk, I get an error that the zip file could not be extracted.
Any ideas?
Check the MagiskManager Folder. Is there the zip?
Blackball said:
Check the MagiskManager Folder. Is there the zip?
Click to expand...
Click to collapse
Yes it's there.
Can extract it as well with Mixplorer.
Should I flash the zip via TWRP?
hi there hope you are fine. i made a twrp and shrp for m10.
this recovery is TESTED only on SAMSUNG M10 SM-M105G and SM-M105F other variants i dunno
thanks to Astrako for his device tree i use it like a reference. and also there is no kernel for M10 then i forced to make a custom kernel for m10
- not works:
+flashlight on shrp and pbrp
+mtp (computer can recognise the device) on shrp / for pbrp there is mtp module
+encryption it only works on custom roms and patched fstab
you tell me
device tree:
https://github.com/AndVer2/android_recovery_samsung_m10lte
shrp:
https://github.com/youssefnone/Action-Recovery-Builder/releases/download/3025330685/shrp.zip
twrp:
https://github.com/youssefnone/Action-Recovery-Builder/releases/download/3041150120/twrp.zip
Pbrp:
https://github.com/youssefnone/Action-Recovery-Builder/releases/download/3060031216/recovery.zip
ofrp: check on this group
Samsung M10
You can view and join @Yusupovqu right away.
t.me
search for ofox_without_clib.zip
(issue/it works) you tell me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i try, then MTP not work in TWRP
can't mount data and internal storage
Kakang_Ragil said:
i try, then MTP not work in TWRP
can't mount data and internal storage
Click to expand...
Click to collapse
look try second link
Kakang_Ragil said:
i try, then MTP not work in TWRP
can't mount data and internal storage
Click to expand...
Click to collapse
can you pm on telegram: @youssefnone
youssef_none said:
look try second link
Click to expand...
Click to collapse
success
hey guys i neee someone to test the recovery again because by mistake i delete kernel source then i need the .config if you have this twrp boot to recovery use file manager browse to /proc and search for config.gz copy the file on internal storage then send the file in tg: @youssefnone
why i need this file? just to report the kernel becausecthe old one (for lineage-17.1 is broking and cause bootloop)
should this work on M105F?
fahimscirex said:
should this work on M105F?
Click to expand...
Click to collapse
fahimscirex said:
should this work on M105F?
Click to expand...
Click to collapse
im not sure 100% but if have Android 10 9 yes 8.1 sorry i dont know you can try and tell me
Wanted to let you know that TWRP works on M105F/DS. MTP and ADB doesn't work though.
and here is the config.gz file, don't know if it will help you or not.
fahimscirex said:
Wanted to let you know that TWRP works on M105F/DS. MTP and ADB doesn't work though.
and here is the config.gz file, don't know if it will help you or not.
Click to expand...
Click to collapse
thank you for mtp and adb if you become my tester i can work on that thank you for testing
youssef_none said:
thank you for mtp and adb if you become my tester i can work on that thank you for testing
Click to expand...
Click to collapse
sure, i can do that.
btw tried to install PBRP and SHRP, but fails to install it, not in correct format.
fahimscirex said:
sure, i can do that.
btw tried to install PBRP and SHRP, but fails to install it, not in correct format.
Click to expand...
Click to collapse
for shrp you should extract recovery.zip first then flash the first zip with high size because there is 2 zip (1-shrp and addons / 2- addons only without shrp)
pbrp the method in the thread
send your telegram i will respond soon
Github not accessible