Related
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
kremmit said:
There is a good chance that the phone is already unlocked.
What was the problem with fastboot? Maybe drivers issue?
Have you tried flashing TWRP? If it takes then the phone is unlocked and you can proceed with flashing the xiaomi.eu or globerom.
Click to expand...
Click to collapse
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
kremmit said:
hmm the fastboot method should have worked. Have you tried it on another computer, maybe 32bit windows?
When finished flashing with miflash in fastboot did it say it was ok at the end or did it give you an error? Als tried to reboot a few times after flashing without usb cable in the phone?
Click to expand...
Click to collapse
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
franciscobcl said:
Im losing my mind!
I tried again in my father's desktop wich have a 64bit windows 7 (I havent a 32 bit at home. I will try to get one borrowed)
I tried with the SP Flash Tool following a guide from "xiaomitips" and, in this computer, the program dornt even recognize my phone. I push the Download button but that give me no signal.
Is there any other way to do this? Other ways to put the rom in the phone? (Sorry the noob language)
Click to expand...
Click to collapse
I'm out of ideas at this point.
I had some trouble with fastboot that my phone did restart when in fastboot mode.
Then i had to change the order of plugging in the cable and starting the program but after that all worked.
No idea what next ...
I had this issue with a Redmi 3. I can't remember the exact solution but I believe you have to have the developer ROM installed in order to unlock the bootloader. Maybe if you search for an anterior model such as the Redmi 3 you will find more information on how to load your ROM. I'm sure that it's the same method for most Xiaomi phones. Good luck!
I heard about do a Hard Reset but i dont know how to do that because i cant access to the OS of the xiaomi.
Is there a way to do a hard reset with the xiaomi stucked on Mi logo?
Tks!
Happy 2017 for all!
I tried to put my phone one Recovery Mode but it is blocked. Its like the phone on this video:
https://www.youtube.com/watch?v=tTzdQpex7BQ
How can i unlock this?
I never could get into the xiaomi recovery either but i managed to flash twrp through fastboot though.
franciscobcl said:
Tks 4 the support!
About the Fastboot i putted the phone on fastboot mode and i disabled the Driver Signature Enforcement on Windows. I connected the phone to the computer and started to run the SP Flash Tool. After the process was completed it wont gave me any result because the phone still stucked on Mi logo..
I did'n tried the TWRP because in every tutorial tells me that i need to go to the Developer Mode and activate the USB debugging i can not access to that because the phone don't give me more than the Mi logo.
Click to expand...
Click to collapse
Hi
Does your problem with sp flashtools and flashing the ROM be solved ?
Sent from my Redmi Pro
I had this problem, but I'd installed TWRP already. But you shouldn't need USB Debugging on to flash TWRP. If you manage to flash TWRP, flash a new ROM (I recommend xiaomi.eu (I think they have Portuguese)) and wipe the Dalvik cache, /cache, and /data (you probably won't have to wipe /data/media).
Miui themes
Sorry will start new item
Have you tried a different cable, that is why mine wasn't recognized at first.
I'm having the same problem here. The phone rebooted itself when I changed the locale, and hung at the Mi logo. I already had TWRP flashed. I also took the opportunity to install a new ROM; the Global Dev ROM. It installed with no errors and I wiped the Dalvik, cache, etc. Still hangs at the Mi logo, but this time without the little loading dots at the bottom. Any suggestions?
Update: I can bring it back to the original state with the loading dots and "powered by Android" at the bottom with a backup I took before flashing the new rom, but still no progress.
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Phosphenes said:
I managed to restore my phone using the video:
Flash Xiaomi Redmi Pro Using SP Flash Tool [Locked Bootloader]
I can't post links since I don't have enough posts here yet, but search for it on Youtube.
Update: It seems like the unlocking permissions on my account have been retroactively rejected, I wonder if that has something to do with it. I also can't seem to find the Global ROM for the Redmi Pro anymore, just the China one. Does anyone have a link for the official Global ROM on the Xiaomi site?
Update 2: Suddenly I have unlock permission again, without reapplying, so that's cool. I installed the Eu HMPro ROM, everything's working well so far.
Click to expand...
Click to collapse
What I did bro ?
I still have the same problem?
franciscobcl said:
Hi everyone!
I have bougth a Redmi Pro on Gearbest and it came with Chinese/English Version of MIUI.
After a week of usage, i turned off my xiaomi and when i turned back on, it stucked on a Mi logo. Far as i discovered searching on web, it was a bug that other peopel have reported too.
I took a opportunity of having this bug to fix, to put other rom on the phone. A rom with Portuguese language witch is my mother lang.
I tried to put the new rom via "SP Flash took" with the fastboot mod but without success.
I requested the unlocking on Xiaomi Unlocking site and when they repplyed and i connected the xiaomi to the computer, the program (XiaomiMiFlash) gave me an error message telling ""Couldn´t verify device. Current account is diferent from the account info in the device"
No i can´t do nothing with the phone.
Can you guys have some idea how can i solve this?
Thank you all!
Click to expand...
Click to collapse
You could try dowloading the official rom and then download the CHINESE version of mipc suite then enter fastboot and connect the phone
Normally the chinese mi pcsuite automaticly detects the phone is in fastboot mode, you could use google translate to translate it all just choose redmi pro on model selector (the top selection bar)the text there is untranslateable just choose the one that says pro
And then under it chose the one that translate to chinese
After That there's two tick box under it, choose the ROM you downloaded
After that chose the one that translate to install brush package, if it doesn't work choose the download brush package next to it
Thus method worked for me when my phone bricked hope it helps you
Ok guys here is the step by step even for noobs how to unbrick Xiaomi Mi Max (helium).
If you have access to fastboot jump to step 11
Requirements :
* MiFlash Beta :Download Here
* MiFlash 20151028 : Download Here
* Global Fastboot Rom : Download Here
* Xiaomi Qualcomm Drivers
* Screw and tools.
* Paper clip or cable
* For sure Usb Cable.
Now if you all ready lets continue repair. First of all you need to open back cover.
1) Open Back cover and disconnect fingerprint sensor and battery. Dont connect battery till you finish whole process. (How to disassemble video : https://www.youtube.com/watch?v=YMG04GqVU_0&t=64s)
2) Make a paper clip to setup short circuit in your mainboard. Here are the testpoints. https://s15.postimg.org/s0j0qhq3v/Xiaomi_Max_Test_Points.png
3) Ok here is the hardest and trickiest one. While you are holding paper clip or cable with those testpoint you need to connect phone to pc. My suggestion 1st connect usb cable to phone then make short circuit then connect to pc.
* One more time you need to connect phone to pc while those two testpoints connected to eachother with a paperclip or a cable.
4) Here is the second tricky part. Unzip rom file. Important part is the name of folder. Please try to make it as short as possible.
Ex : C:\mimax\
So after extraction your folder will looks like this : http://oi63.tinypic.com/334rr11.jpg
5) You need to install both MiFlash versions. They are 2 different software so you shouldnt see any errors like "it is already installed".
6) Go To C:\XiaoMi\XiaoMiFlash and run XiaoMiFlash.exe as an administrator. Click browse and choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax)
7) Click "refresh" you will see COM port and click "flash" If you dont see any COM port here first check if you installed drivers correctly. If drivers are installed correct please go back to step 3 and try again.
8) Install will start and continue and %99 possibly it will stop in the middle You will receive Max buffer 256 error. No worries just keep calm and take deep breath. Go to next step
9) Disconnect usb cable from pc and phone. Reconnect battery. Now voila phone will ready to work BUT NOT READY TO WORK FLAWLESS. So now put your phone to fastboot mode. Yes you read correct now your phone will be in fastboot mode even it could be ready to use but just wait for next step.
10) Fastboot mode : Volume Down + Power button you will see fastboot screen and connect to PC.
11) Now close old MiFlash and run the normal one from either desktop or C:\Program Files (x86)\Xiaomi\MiPhone\MiFlash.exe or C:\Program Files\Xiaomi\MiPhone\MiFlash.exe.
12) Choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax).
13) Click "refresh" and this time you have to see device serial number on device tab. Now click flash and let process finish. It takes around 3-5 minute and phone will reboot by itself.
Now re-assemble your phone. DONT FORGET TO CONNECT FINGERPRINT SENSOR. Now you are totally ready.
Tried 5 times with my very own Xiaomi Mi Max 128 GB.
Different reactions
Hi,
My device could still boot on fastboot mode, and flashes successfully through it on MiFlash Beta. However, the device remains stuck on Mi logo. I've already tested flashing on EDL mode apparently successfully, with the same results. I've flashed TWRP, but the device don't enter recovery mode. What can I do? Any suggestion will be welcome.
benzersizadam said:
Many thanks for this thread, I stuck on my mi max with no reaction at anything, I read more than 100 threads, I tried testpoint, DFC (deep flash cable), click inside usb terminal to pc, windows 8, 7 10, 32 bits, 64 bits, programms like qfil (qpst), flasher tools for other phones and nothing, before with other apps at first second gives me error "can not read from port COM...", and now at least advance to 5 seconds with same error, I need to know it is neccesary too disconnect, remove two plastic cables down where places the battery
Click to expand...
Click to collapse
Working also with Hydrogen. Thanks.
@benzersizadam
This is why XDA is a great FORUM! Thank you for writing this thorough solution!
My device is up and running currently with MIUI 8! It went from a dead brick to a productive device again! I was almost giving up hope! You saved the day! It was a lot of work, but it is great seeing the device alive again.
I would just add that taking the cover off doesn't even need a tool like in the original disassembly youtube video: https://www.youtube.com/watch?v=dULcMWCEgEc
Yay!
coffee-turtle said:
@benzersizadam
This is why XDA is a great FORUM! Thank you for writing this thorough solution!
My device is up and running currently with MIUI 8! It went from a dead brick to a productive device again! I was almost giving up hope! You saved the day! It was a lot of work, but it is great seeing the device alive again.
I would just add that taking the cover off doesn't even need a tool like in the original disassembly youtube video: https://www.youtube.com/watch?v=dULcMWCEgEc
Yay!
Click to expand...
Click to collapse
Can you kindly explain some tips or secret to get unbrick cause mine is more than 4 months almost totally dead, just receive charge the battery but any signal of life in display, don´t enter recovery, fastboot, in mode EDL pc identifies like hs-usb qdownload 9008 but in 4 or 5 seconds cut conection with pc. and in my country nobody knows about Xiaomi. thanks in advance
SubwayChamp said:
Can you kindly explain some tips or secret to get unbrick cause mine is more than 4 months almost totally dead, just receive charge the battery but any signal of life in display, don´t enter recovery, fastboot, in mode EDL pc identifies like hs-usb qdownload 9008 but in 4 or 5 seconds cut conection with pc. and in my country nobody knows about Xiaomi. thanks in advance
Click to expand...
Click to collapse
Hi @SubwayChamp Everything I did was in the post and video from above in the first post by benz....
His instructions were perfect along with the youtube video. It's tricky, true, but with patience you can go through the steps and get your device running again. I was so glad that @Qulox gave me this link to this thread.
As you go through the steps, if you get stuck, we can try to give you advice.
This works for Hydrogen as well.
Many thanks
I have two dead mi max. One 128gb helium and one 32gb hydrogen.
128gb helium is completely lifeless. No charging led, no vibrations, no fastboot mode. Though i could bring it up to edl mode showing right qualcomm device in device manager. I tried flashing stock rom as mentioned in this guide which rather went successful without giving any error, even while battery connector was removed.
But mobile is still in same lifeless condition. Other than flashing process going through, it didnt make any difference. Dont know whats wrong. Also i didnt have to use two miflash versions as mentioned in steps as flashing process didnt give any error.
32gb hydrogen, boots up in flashboot mode, shows charging led, mi logo even edl model worked without any issue. It even boots up, but gives error of encryption unsuccessful asking me to reset device. I tried factory reseting it. Tried flashing twrp and wiping, formatting data, changing file system to all formats like fat, f2fs, ext1, ext2, ext3, ext4. Tried flashing crdoid and RR based on orea. Nothing working.
With twrp it keeps bootlooping showing mi logo. And with stock rom, recovery shows up encryption error. Followed procedure mentioned in this guide as well.
Is there anything am i missing or can do? Btw, bootloader is locked for both the devices. I could flash twrp referring another guide which suggested to replace stock recovery in rom files/ folder and flashing it like stock rom through miflash tool.
Battery problems? in the 128 especially?
If "nothing works" through any normal software methods, the ram &/or ROM memory chips might have become semi-defect. They are not eternal . . .
cobben said:
Battery problems? in the 128 especially?
If "nothing works" through any normal software methods, the ram &/or ROM memory chips might have become semi-defect. They are not eternal . . .
Click to expand...
Click to collapse
Tried replacing battery as well. Surprising thing is completely dead 128gb helium does boot up in edl mode with flashing working perfectly file in miflash tool. Dont know how reliable that software is.....
Hello,
trying with both Helium & Hydrogen. Still on error like say these logs.
log#1
Code:
[0,02 COM7]:[COM7]:start flash.
[0,02 COM7]:received hello packet
[0,02 COM7]:can not found programmer file.
log#2
Code:
[0,00 COM7]:[COM7]:start flash.
[2,03 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[4,56 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[7,11 COM7]:try to reset status.
[7,13 COM7]:Switch mode back
[7,13 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[7,14 COM7]:Riferimento a un oggetto non impostato su un'istanza di oggetto.
Hope anyone can help me. What's my wrong following the guide.
Thanks
harpy.eagle said:
Tried replacing battery as well. Surprising thing is completely dead 128gb helium does boot up in edl mode with flashing working perfectly file in miflash tool. Dont know how reliable that software is.....
Click to expand...
Click to collapse
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
rizkhan77 said:
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
Click to expand...
Click to collapse
This is the video of Test Point https://youtu.be/SqcVY8IWkZI
benzersizadam said:
Ok guys here is the step by step even for noobs how to unbrick Xiaomi Mi Max (helium).
If you have access to fastboot jump to step 11
Requirements :
* MiFlash Beta :Download Here
* MiFlash 20151028 : Download Here
* Global Fastboot Rom : Download Here
* Xiaomi Qualcomm Drivers
* Screw and tools.
* Paper clip or cable
* For sure Usb Cable.
Now if you all ready lets continue repair. First of all you need to open back cover.
1) Open Back cover and disconnect fingerprint sensor and battery. Dont connect battery till you finish whole process. (How to disassemble video : https://www.youtube.com/watch?v=YMG04GqVU_0&t=64s)
2) Make a paper clip to setup short circuit in your mainboard. Here are the testpoints. https://s15.postimg.org/s0j0qhq3v/Xiaomi_Max_Test_Points.png
3) Ok here is the hardest and trickiest one. While you are holding paper clip or cable with those testpoint you need to connect phone to pc. My suggestion 1st connect usb cable to phone then make short circuit then connect to pc.
* One more time you need to connect phone to pc while those two testpoints connected to eachother with a paperclip or a cable.
4) Here is the second tricky part. Unzip rom file. Important part is the name of folder. Please try to make it as short as possible.
Ex : C:\mimax\
So after extraction your folder will looks like this : http://oi63.tinypic.com/334rr11.jpg
5) You need to install both MiFlash versions. They are 2 different software so you shouldnt see any errors like "it is already installed".
6) Go To C:\XiaoMi\XiaoMiFlash and run XiaoMiFlash.exe as an administrator. Click browse and choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax)
7) Click "refresh" you will see COM port and click "flash" If you dont see any COM port here first check if you installed drivers correctly. If drivers are installed correct please go back to step 3 and try again.
8) Install will start and continue and %99 possibly it will stop in the middle You will receive Max buffer 256 error. No worries just keep calm and take deep breath. Go to next step
9) Disconnect usb cable from pc and phone. Reconnect battery. Now voila phone will ready to work BUT NOT READY TO WORK FLAWLESS. So now put your phone to fastboot mode. Yes you read correct now your phone will be in fastboot mode even it could be ready to use but just wait for next step.
10) Fastboot mode : Volume Down + Power button you will see fastboot screen and connect to PC.
11) Now close old MiFlash and run the normal one from either desktop or C:\Program Files (x86)\Xiaomi\MiPhone\MiFlash.exe or C:\Program Files\Xiaomi\MiPhone\MiFlash.exe.
12) Choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax).
13) Click "refresh" and this time you have to see device serial number on device tab. Now click flash and let process finish. It takes around 3-5 minute and phone will reboot by itself.
Now re-assemble your phone. DONT FORGET TO CONNECT FINGERPRINT SENSOR. Now you are totally ready.
Tried 5 times with my very own Xiaomi Mi Max 128 GB.
Click to expand...
Click to collapse
hi, could someone share with me the miflash beta? I can download the rest but I cannot download the beta one.
thanks
Wanted to say thank you was able to recover my mi max 64gb unit.
Please could someone guide me on how to flash either a stock rom onto my Mi Note 2?
I have been told by an admin elsewhere on here that it is possible to re-flash the stock rom that is already on a device using fastboot but I do not know how.
I am presuming no PC will be involved as the current system will not boot fully and therefore cannot be used to set USB developer options etc.
Thanks in advance.
A PC is used in this operation. You will need fastboot and adb drivers and mi flash. You can find lots of tutorials about the fastboot flash on google. Even on Mi Note 2's subforum on the miui forum.
alexmanu1 said:
A PC is used in this operation. You will need fastboot and adb drivers and mi flash. You can find lots of tutorials about the fastboot flash on google. Even on Mi Note 2's subforum on the miui forum.
Click to expand...
Click to collapse
Hi @alexmanu1: Oh dear, then I'm still stuck because my phone cannot get through the android setup screens. It has been like this since I did a simple factory reset.
I posted this on the MIUI forum and a moderator told me that I did not need a PC to re-flash the same stock rom already on the phone. His response is here: https://en.miui.com/thread-4960565-1-1.html
The reason I need a non-pc solution is that following a factory reset, I go through the setting of region, wi-fi etc but after I select "set up as new", my phone is stuck on "Checking for updates" (no matter how long I wait or what wifi I am on).
I thought I would try to install a new stock rom to see if that would fix the issue. However, in order to unlock with the Mi bootloader unlock tool, I need to enable some options under developer menu, which is not possible when I cannot get to any menus :crying:. Also, I cannot utilise an SD Card (if that would even help), because the Mi Note 2 does not have an SD Card slot. Furthermore, I cannot write to the phone's storage because the phone defaults to USB charging mode so nothing is visible when connected to a PC with a USB cable.
Any further comments on what the MIUI moderator told me (or any other ideas I could pursue)?
Thanks!
Unfortunately I have flash wrong Img to my Black shark 2 Global (SKW-HO) ,Now device have no screen , hardbracked, PC recognize under Com port as HS_USB Diagnostics 9008 mode, how to get back alive please
I realy want back to life, I have another working phone in hand as will, Need Help to get backup and restore to my bracked device. can some one guid me how to backup EDL mode Flashable Rom,
thanks in advance
I'm sorry mate but unfortunately, there's no official ROM available to flash via EDL mode. Even fastboot ROM is not available. Even their Chinese forum is useless. Their dev team is trash.
batuken said:
I'm sorry mate but unfortunately, there's no official ROM available to flash via EDL mode. Even fastboot ROM is not available. Even their Chinese forum is useless. Their dev team is trash.
Click to expand...
Click to collapse
opps,
So can we make our own flashable rom from backup. i have twrp backup all partitions, I dont know how to Make loader file , if u can i have working phone in hand,
I can do Jtag opration too , but there is no pinout also , must need to open Emmc and then get isp pinout itself, it's long process and hard to disassemble device is will. :|
If you have Pro Tools,like miracle, umt , ufi you take a full firmware backup of the other Black Shark 2 and flash it in your Black Shark 2, your problem will be fixed.
Hi,
I'm not sure I'm posting in the right section but, I had a really bad experience upgrading to android 10. Really sluggish and slow... so I tried to downgrade to android 9 by using Lenovo's Rescue and Smart Assistant.
What I did, is to find the stock ROM for my model, and replace the files downloaded by the Rescue Assistant (which downloaded the latest firmware). The process went through, but now the device wont power on.
When I plug in the USB, windows makes a sound, the charging light comes on, but The rescue Assistant nor SP flash tool is able to flash the latest firmware.
Is it bricked for good?
Model : TB-XF606F
Hardware number : 60
Maybe your computer doesn't recognize your tablet. Did you ever try using sp flash tool with your tablet before? You can try reinstall or install a driver for your table if you haven't done it yet.
Well the tablet is recognized as the "mtk vcom..." in device manager. I guess it is the driver that the lenovo rescue app installed.
I have never used sp flash tool with my tablet, just the lenovo rescue.
I tried on 2 different pc and it is the same thing. I think the problem is that I can't turn off the tablet properly, even though, all I can see is a black screen.
I will try to drain the battery by keeping the power button pressed with some scotch tape. I don't know what I can do else.
Edit: I tried a few other times with flash tool using different setting for the connection (with battery and full speed) and nothnig happened. But now windows says it does not recognize my tablet.
did the same thing exactly. . bricked lenovo m10 fhd plus x600v after i flashed a downgrade version. dont try to downgrade this thing. i had already flashed it with 3 or 4 versions the same way , but when i chose to flash the oldest version available with the model , this tab got completly unresponsive , no feedback when try to boot into recovery, fastboot, or system . neither does it gets recognised in windows or anything - device manager dowsnt recognise this usb device ( in device manager properties comments it reads- USB\DEVICE_DESCRIPTOR_FAILURE). if you find a way to reflash the device please let us know. good luck .
Bricked mine after being completely running smoothly on Lineage, then was messing around trying to get gapps installed and jacked up the partitions. TWRP said no OS. Kept messing around and mistakenly locked the bootloader again with apparently an unverified boot partition. . I couldn't get SP Flash tool to work ever either. Pretty sure it's a door stop now.