Related
Hello i should have read the forum before apllying the root process but i pick in one site and only find the forum when the problems began.
I use the Touchnooter2-1-31 thanks for doing it but i use my 32G card so after 30 min no restart i took the sd out and try to power off and the screen became freeze in the same point even after pressing the N button and power 30 seg. power off then on without the card.
By the way i don't have a backup of my default only take out the content of SD card and nook, site not tell me to do it so no return to factory default.
Then i use other card 8G, N2T recovery 0.2 and gain control of NST again and apply with this card the Touchnooter2-1-31 again, since not all programs were in and i could install it .
After 12h i have Gmail and opera mobile but i can't use android market or access to stores of app so i am putting some apps that i can install by email or with .apk
And i copy again the content of .docThumbs and Digital Editions on Nook and on SD and also use the ADE to put the books again in to read but no chance on reeding thems with old BARNES & NOBLE menu
Now for read i have the ezPDF reader.but i don't like it.Aldiko give me error not even install so
I would like to now if i can use the old BARNES & NOBLE menu since i hit N key and home flicks the old BARNES & NOBLE menu and dissapear library put my sreen flashing with the image frozen and his negative image and only with power and N key 30seg i can turn it again but in this process the screen freeze on shop don't open and in nook settings- Social i can change notting flicks but nothing happens?
Is possible to get BARNES & NOBLE menu working again?
Thanks
My question on reading your post is - which version of the NST OS are you starting from?
Something is unhappy, but hard to say what. I would probably reset to stock again, take note of which Nook OS version you are running, and see if one of the other manual nooters works with it.
You make a disk much like the touchnoter disk, but instead of the process running completely automatically, you boot into clockwork recovery mode and choose which zip files to flash.
I threw one together called Tinynoot that gives you root + amazon but no google apps.
There looks like a better implementation called NookManager. Like mine tinynoot it is intended to support a wide range of devices, but it also doesn't install the Google market.
Google apps is a moving target, so you have to be sure the version of the rooting tool you use works with the specific OS installed on your Nook. In order to make Google apps work, core files called framework files are patched. Touchnooter, salsichanooter and I'm blanking on Eded's tool's name are all targeted to getting google stuff working, as well as the basics of getting you root access.
I am guessing that the problem you describe relates to a mismatch between the framework in the touchnooter and the rest of your OS.
Hello my NTS software version was 1.2.* i don't remember this last number but i try when i buy it 2 days ago to install from BN and nothing happens so was in last version, now nook OS how can i see it? Now the software version is undentified by the way yesterday i follow this movie but in the begining the page don't tell me Rooted forever tell me the instructions instead in both times, only in second attempt i get the screen like in movie at min 1:45 Nook Touch Rooting Tutorial - Super Easy Method user TheeBookReader on youtube i can add links
Google play today is working yesterday i install a cracked version but when i pick the apps tell me that the installation will be transfered sooner to my equipment but they don't happear
android market no search so i add searchmarket
When you tell me to reset to stock again is using N2T?
Thanks
Edited to add: i finally do a factory reset and now updating to latest version i will kept my nook as is since here we don't have so many hotspots free to surf on internet, thanks for all the help and info that i receive in this forum
As the title says I have an xperia play but the wifi isnt working. Ive done a factory reset, used pc companion to reinstall the software and even installed a custom kernel and rom but it wont even turn on the wifi thus I cant search for a router.
Is there a way I can at least download the apps i want such as
fpse
screen filter
various games
themes
ect
even with the broken wifi on my phone.
Ive had a search online and Im either wording my search wrong or its not possible to do what I want.
Also any advice a possible fix for the wifi would be great but Im assuming that its the hardware thats broke.
With usb cable, you may download app and install with adb or any pc companion software
You don't have warranty anymore?
Well, you can download the apk of the app and then copy it to your phone. Then just install it, shouldn't be too difficult.
Only problem could be, if you don't have any file explorer on your phone
Google the app you want , download it in your desktop and transfer to your phone. Install it via file manager
Sideloading, How I do it.
I haven't seen anyone mention this yet.
You need to first go into your phone settings and enable Unknown Sources found in the Security tab. Unknown sources will enable you to install apps without the Play Store.
Then connect your phone to your PC with your USB cable and select either Storage Mode or USB Mount, depending on your phone it will be labeled differently.
Your phone's folders will appear on your computer, simply drag the .apk file into your phone to transfer. Once the transfer is complete, remove the USB cable or unmount the phone.
Finally, use any file browser on your phone to find the .apk you transferred and click it. Your launcher should automatically ask you if you want to install the .apk
Note: App files are taged as .apk so any app you download should be something like Facebook.apk. I personally just do a general search for whatever I want and then include "apk" in the search field. You will find 100+ websites where you can download various apps, but the trick is, you usually have to do your research on the Play Store first to find out what the latest version number of the app is because there are mostly outdated versions floating around the internet.
I guess the best part about side loading is that the Google Play Store can't filter what you install. So apps that were previously not compatible could possibly run on your device no problem. Like Netflix used to be incompatible officially with my phone but I sideloaded it and it worked fine. Netflix finally released official support but the fact is I got it before everyone else.
as they said, you should have a pc and it have the apk file to download it to phone
There are bits and pieces of this all over XDA (and the web) so I thought I'd just put it here to make it easier.
I purchased a Chinese Huawei Media Pad M3 8' WiFi tablet in March 2018 with the following details.
Model: CPN-W09
Build: CPN-W09C233B066 , CPN-W09C233B067 (updated 8 Apr 2017 with no negative effects)
EMUI 5.1
Android 7.0
Kernel: 3.18.31-gee0501b
I wanted to get google services on this device. This is what finally worked for me.
Startup the tablet. Select USA English, skip Huawei registration and Wifi. Skip cloud services, enable pin, enable fingerprint ID. Get to home screen.
Connect to computer, enable file transfer and drop GSM the gsminstaller apk into your download folder. Install the gsminstaller and after the installer is installed, open it and press the 'one touch installation button'. After that, I installed Google Play service 12.5.20 and Google Play store 9.3.14 both of which I downloaded from apkmirror.com.
I was able to log into my google account and everything seems to be working fine. I even reset the tablet to factory specs to make sure I had the right steps and it looks like the GSM core stayed installed.
Note I got the link to the gsmcore (gsminstaller.apk) from this thread. so thanks.
Also, as I researched this, I stumbled across a couple of other tidbits that I thought I'd put here.
There are some hidden menus you can reach by putting the calculator in landscape mode (so you can see the '(' ')' characters.) and keying in the following combinations.
To get the Product ID enter: ()()1357946()()=
To get the Project Manager (install firmware from SD card, reset etc) aka Manufacture Mode enter: ()()2846579()() =
Hope this helps someone else.
Hey i just got a Huawei M5 mediapad. When i send the apk to my tablet there is no install button for it. Please help me. I got it from China and i dont have play stores or anything.
BlaZez390 said:
Hey i just got a Huawei M5 mediapad. When i send the apk to my tablet there is no install button for it. Please help me. I got it from China and i dont have play stores or anything.
Click to expand...
Click to collapse
Use the Files app to find the APK where you put it on the tablet, double click it and install the APK (app). After it is installed , you'll see the icon in your apps. Click that and then you will see the one-touch install button.
Report back here if it works so other people can find the info for your tablet.
rsoandrew said:
Use the Files app to find the APK where you put it on the tablet, double click it and install the APK (app). After it is installed , you'll see the icon in your apps. Click that and then you will see the one-touch install button.
Report back here if it works so other people can find the info for your tablet.
Click to expand...
Click to collapse
I have the same problem, it just doesn't allow you to install the APK (App may damage your device, Installation forbidden.) and there is no option to turn off checking apks
00stargazer said:
I have the same problem, it just doesn't allow you to install the APK (App may damage your device, Installation forbidden.) and there is no option to turn off checking apks
Click to expand...
Click to collapse
To skip the Hicare check, you just need to disconnect from the internet before you double click on the APK. Then you should be able to install the GSMinstaller.
00stargazer said:
I have the same problem, it just doesn't allow you to install the APK (App may damage your device, Installation forbidden.) and there is no option to turn off checking apks
Click to expand...
Click to collapse
When I switched off and on the external sources/third party app radio buttons, there was an option to "Enable external sources app to scan..." that was enabled by default. I disabled that tick box and it never checked any APK's again.
Hope this works for you.
I follow the steps, and got the play store installed,but when I went to install a few games, it said it couldn't install them. It also said the google play services wouldn't work unless it was updated, but when I went to update it, it didn't say there was an update. A few things installed,like Nova launcher. The games I tried to install, I was able to install them last time without a problem (don't remember what I did then to get Google play to work). Today I unlocked the bootloader and rooted it,and it obviously erased everything. Any ideas would be greatly appreciated. I have the WiFi only model.
It worked for my MEDIAPAD M3, I had to factory reset it, and skip all the set up options. do not add any password or wifi to it. just skip it all, then run the GMS installer., and also install the google play store , framework and play services.
then, you can add your wifi password.
I've been searching for a couple of hours and there's no guides or even clarification about what is possible with regards to running non-tv apps on the shield / android TV.
I really need to install a custom internet browser, VoIP apps, syncthing, firewall, maybe libre office who knows etc.
So:
- How do you install Full Google PlayStore?
- Do you need to root? (guide 1)(guide 2)
- I heard you can alternatively sideload apps via ADB. So I guess you need TWRP, and root? And where do you get the apks from?
In general, are there any non-UX limitations of android TV that would cause apps to not run? Or does it have the same capabilities as plugging in a mouse & kb into my phone's OTG port and then casting its screen to a TV?
Well here's a few thoughts without going into too much detail as I'm at work:
Full google play will need a custom rom I believe and you'll need to give up the android tv version of play and leanback functionality (I think)
There may be another method (still losing androidtv but probably needing root)
You can sideload via ADB or via a sideloading app. Or using network shares, USB storage, USB transfer etc.
In the past I've used Titanium Backup (rooted naturally) installed a load of games to my phone then moved the backups to an SD/USB to restore on the SHIELD.
There are also dubious website and alternative stores you can install or visit on the SHIELD. Not a fan of those tbh.
You can get APK downloader addons for web browsers that allow you to download directly from Play Store website. Chrome android doesn't support these I am lead to believe... but installing Yandex broweser and installing the chrome addon to that apparently might work. So then load Play Store in Yandex browser and you can get your apps direct from google... just sadly not the paid ones.
I've been meaning to get on this again myself. I'm really quite pissed that most of my paid Rockstar android games won't install from AndroidTV Play store. These games run fine on SHIELD but are flagged as unsupported. Thus forcing you to download them from dubious sources to get running due to the DRM. The TV store is very disapointing, the layout is bad, there's no reviews and developers just don't seem interested in keeping their apps accessible on the platform when they otherwise should be. The Rockstar games in particular run fantastic on the SHIELD and if I were Google or Nvidia I'd actively be trying to encourage Rockstar to promote these games as SHIELD compatible or enhanced!
I don't know about any technical disadvantages to the platform that hold things back but I'm sure many people here will be far more knowledgable. I just assume an app has to be fully functional with just the remote or joypad to be ATV compliant. I'm not entirely sure on this last question but I will say this, every app I've sideloaded has worked as long as it doesn't require touch control in games. I use a 5way hub so I've always got mouse/keyboard and additional storage options etc. If it can be controlled with one finger you can use a mouse to facilitate that.
thanks for the input. Yeah it sucks for paid apps and games. First I'll see if I can get by with just root and these methods, because I couldn't find any good custom roms for the shield. There is one on another forum but I couldn't get it installed (got stuck at nvidia logo after a successful install)..
I'm a noob to android TV, what's "leanback functionality"?
Twodordan said:
thanks for the input. Yeah it sucks for paid apps and games. First I'll see if I can get by with just root and these methods, because I couldn't find any good custom roms for the shield. There is one on another forum but I couldn't get it installed (got stuck at nvidia logo after a successful install)..
I'm a noob to android TV, what's "leanback functionality"?
Click to expand...
Click to collapse
You can sideload any apk to the shield if rooted but there are apk's made for android tv and just mobile apk's with mobile apl's you lose some functionality of android tv however a keyboard mouse combo or even nvidia shield tv app will help you navigate through those apk's that are not made for android tv
As far as I know, sideloading apps means finding an apk, placing it on the device, and then running it (and allowing installation from unknown sources).
So at what point in this process do I require root? Do I need the root if it's an apk not made for Android TV? What is that process exactly?
Twodordan said:
As far as I know, sideloading apps means finding an apk, placing it on the device, and then running it (and allowing installation from unknown sources).
So at what point in this process do I require root? Do I need the root if it's an apk not made for Android TV? What is that process exactly?
Click to expand...
Click to collapse
I side load stuff to my non rooted shield all the time its true not all apps will work but a majority of them will for some apps that have only a vertical view you can use apps like set orientation to have it in landscape mode just allow install of unknown apps for the file browser you use on the shield.
https://apkpure.com/set-orientation/com.googlecode.eyesfree.setorientation
You can simply place the apk into your downloads folder or wherever you like on the shield tv then install it from there using a file browser I personally use FX file explorer on shield but any should work. You can also use a file browser to add your cloud like google drive or one drive or whatever and install directly from there or browse to a shared folder on pc and install it that way too whatever is easier for you.
Apps that require root to run will not of course work properly on a non rooted device, however there are plenty of apps that do not require root that install and run just fine.
Yeah I always keep my SHIELD rooted for this reason. I don't know what the situation is with TWRP recovery at the moment but I know it stopped working in one of the recent updates. By being rooted you can use Flashfire app to flash zips to the SHIELD if you need to flash let's say GLTools or something like that. I mainly use that to force antialiasing for certain games. One thing you will want is either Sideload Launcher (on Play Store) or TV App Repo. Sideload launcher just loads a launcher that includes your non TV apps (They don't all work with the leanback launcher) or you can use TV App Repo to make shortcuts to them on the leanback launcher. TV App Repo will also need root to work, so yeah that's a great reason to have root when sideloading.
I could adb install the sideload launcher apk (got it from apkpure) to my 16gb shield tv 2017, via a usb-to-usb cable, and it works just fine without root.
Installing root is such a goddamn nightmare. You have to flash a full developer stock image for which you have to sign up to get from nvidia, then install magisk etc, and the killer is you gotta do this manual developer whole-image flashing nonsense every time there's an update from nvidia. Seriously why the hell can't we android users just get a proper version of the full opensource debloated OS that updates itself like a sane person? X_X
[Edit] Installed TV Launcher instead of sideload launcher. It can replace the default launcher and it is also so much nicer: https://apkpure.com/tvlauncher/com.awe.dev.pro.tv
[Edit] So a custom launcher like TV Launcher will insert itself as a suggestion whenever you press the home screen, and you can set it to Always use this launcher, however in many situations, like restarting your shield, it will default back to the stock launcher. You can read this but it's still fine to always have a prompt whenever you press home: https://www.reddit.com/r/ShieldAndr...hange_default_launcher_on_shield_2017_nougat/
I use Yalp store and set it up as different device (in my case Samsung Galaxy Tab S3). Works really fine for 95% of the time.
Question Please?
Can you please say which shield TV you have? I am thinking of buying one but am put off by the lack of full play store. Being able to install any apk from a USB stick may sway me (but still not sure). What I plan to do is install any apps I want on my phone, use an apk extractor to get the apk, put it on USB then use CX file explorer to click and install. Does that sound all possible on non-rooted latest full Shield?
Cheers.
Eric.
"You can simply place the apk into your downloads folder or wherever you like on the shield tv then install it from there using a file browser I personally use FX file explorer on shield but any should work. You can also use a file browser to add your cloud like google drive or one drive or whatever and install directly from there or browse to a shared folder on pc and install it that way too whatever is easier for you.
Apps that require root to run will not of course work properly on a non rooted device, however there are plenty of apps that do not require root that install and run just fine."
---------- Post added at 02:52 AM ---------- Previous post was at 02:44 AM ----------
PS Since you can install apk's easily did you ever try to sideload the Google play store apk (along with Google Play Services apk to see if they will install?
That would be interesting.
Gaps download for HUAWEI Chinese phones would be easy to obtain.
DBCAB said:
I side load stuff to my non rooted shield all the time its true not all apps will work but a majority of them will for some apps that have only a vertical view you can use apps like set orientation to have it in landscape mode just allow install of unknown apps for the file browser you use on the shield.
https://apkpure.com/set-orientation/com.googlecode.eyesfree.setorientation
You can simply place the apk into your downloads folder or wherever you like on the shield tv then install it from there using a file browser I personally use FX file explorer on shield but any should work. You can also use a file browser to add your cloud like google drive or one drive or whatever and install directly from there or browse to a shared folder on pc and install it that way too whatever is easier for you.
Apps that require root to run will not of course work properly on a non rooted device, however there are plenty of apps that do not require root that install and run just fine.
Click to expand...
Click to collapse
Twodordan said:
Installing root is such a goddamn nightmare. You have to flash a full developer stock image for which you have to sign up to get from nvidia, then install magisk etc, and the killer is you gotta do this manual developer whole-image flashing nonsense every time there's an update from nvidia. Seriously why the hell can't we android users just get a proper version of the full opensource debloated OS that updates itself like a sane person? X_X
Click to expand...
Click to collapse
You don't need the developer image to get root.
https://forum.xda-developers.com/shield-tv/development/kernel-overclock-kernel-2-22-ghz-t3943079
And if you don't flash twrp, getting updates will work fine, you will just have to root again.
Twodordan said:
I could adb install the sideload launcher apk (got it from apkpure) to my 16gb shield tv 2017, via a usb-to-usb cable, and it works just fine without root.
Installing root is such a goddamn nightmare. You have to flash a full developer stock image for which you have to sign up to get from nvidia, then install magisk etc, and the killer is you gotta do this manual developer whole-image flashing nonsense every time there's an update from nvidia. Seriously why the hell can't we android users just get a proper version of the full opensource debloated OS that updates itself like a sane person? X_X
[Edit] Installed TV Launcher instead of sideload launcher. It can replace the default launcher and it is also so much nicer: https://apkpure.com/tvlauncher/com.awe.dev.pro.tv
[Edit] So a custom launcher like TV Launcher will insert itself as a suggestion whenever you press the home screen, and you can set it to Always use this launcher, however in many situations, like restarting your shield, it will default back to the stock launcher. You can read this but it's still fine to always have a prompt whenever you press home: https://www.reddit.com/r/ShieldAndr...hange_default_launcher_on_shield_2017_nougat/
Click to expand...
Click to collapse
How is rooting a nightmare ? Once your bootloader is unlocked it literally takes 5 minutes to root..
Unlock bootloader
adb reboot bootloader
fastboot boot twrp.img
install magisk zip
Reboot , you're rooted..
I don't understand why people suggest any other file explorer besides "x-plore". By far the best file explorer out there, 100% crap free. You can install any APK from any location using x-plore.. Most of the time I leave the APK on my network , that network drive is mapped in the shield settings, I simply browse to it with x-plore , and install any APK. If it doesn't make a shortcut in the android tv menu , then simply use "sideload launcher" by chainfire to launch whichever app doesn'T show up on the main menu.
ericritou said:
Can you please say which shield TV you have? I am thinking of buying one but am put off by the lack of full play store. Being able to install any apk from a USB stick may sway me (but still not sure). What I plan to do is install any apps I want on my phone, use an apk extractor to get the apk, put it on USB then use CX file explorer to click and install. Does that sound all possible on non-rooted latest full Shield?
Cheers.
Eric.
"You can simply place the apk into your downloads folder or wherever you like on the shield tv then install it from there using a file browser I personally use FX file explorer on shield but any should work. You can also use a file browser to add your cloud like google drive or one drive or whatever and install directly from there or browse to a shared folder on pc and install it that way too whatever is easier for you.
Apps that require root to run will not of course work properly on a non rooted device, however there are plenty of apps that do not require root that install and run just fine."
---------- Post added at 02:52 AM ---------- Previous post was at 02:44 AM ----------
PS Since you can install apk's easily did you ever try to sideload the Google play store apk (along with Google Play Services apk to see if they will install?
That would be interesting.
Gaps download for HUAWEI Chinese phones would be easy to obtain.
Click to expand...
Click to collapse
I have the 2015 pro model NVIDIA shield, but do have access to a 2017 model at my brother in laws, anyway extracting apks or getting them from places like apk mirror then using a usb to install will work you can even install them over your network from your pc or laptop using a file explorer program that supports it. I have never tried installing the full play store on my shield as it comes with one, however I have tried to install things using a pc browser and the google play site to the shield and had some luck installing a few apps that are not available on the shields version of play store. So basically doesn't matter where u get the apk you can usually install it to the shield some apps wont display properly which is why I suggested an orientation type program to correctly display and use also be aware some apps might need a mouse or keyboard to function properly when you do this depending on what you install.
Roamin64 said:
How is rooting a nightmare ? Once your bootloader is unlocked it literally takes 5 minutes to root..
Unlock bootloader
adb reboot bootloader
fastboot boot twrp.img
install magisk zip
Reboot , you're rooted..
I don't understand why people suggest any other file explorer besides "x-plore". By far the best file explorer out there, 100% crap free. You can install any APK from any location using x-plore.. Most of the time I leave the APK on my network , that network drive is mapped in the shield settings, I simply browse to it with x-plore , and install any APK. If it doesn't make a shortcut in the android tv menu , then simply use "sideload launcher" by chainfire to launch whichever app doesn'T show up on the main menu.
Click to expand...
Click to collapse
i dont understand y ppl think their preferred app is the same or should be everyones preference.. never really used xplore so cant comment on it but this is bcuz i use fx file explorer.. it has been good to me for years and still counting.. you can access network and more if u get an fx license which is cheap.. u can set up windows, ftp, ssh, webdav over network... set up cloud storage... bluetooth... web access.... fx connect and other means using it.. root installer.. text editor... binary viewer... deals with archives... themes... multiple root settings and other settings... diagnostic tools... has builtin busybox or u can use any other busybox you have installed and more
agreed though, roots easy if you dont have troubles.. not sure what ur runnin but nstv pro 2019 unless its been updated since i last checked cannot simply install magisk.. u need modified magisk.zip which is an older version then need to do some trickery in twrp to get it to flash right then still might need some trickery to get it to boot.. i have to use adb root to change bootstate to orange before itll load and if u dont got adb authorized yet then i use twrp to set a script tochange bootstate on boot.. tyen if u still have problems might need towipe and/or mess with vbmetaand/or dtb partitions.. and im an experienced person when it comes to root, exploits, twrp utilization and fastboot (not claiming to b pro or anything crazy, just know how to use them fairly well and general idea of how things work) so i can imagine some ppl that maybe arent as experienced or new to this particular device would have a difficult time indeed.
DBCAB said:
I have the 2015 pro model NVIDIA shield, but do have access to a 2017 model at my brother in laws, anyway extracting apks or getting them from places like apk mirror then using a usb to install will work you can even install them over your network from your pc or laptop using a file explorer program that supports it. I have never tried installing the full play store on my shield as it comes with one, however I have tried to install things using a pc browser and the google play site to the shield and had some luck installing a few apps that are not available on the shields version of play store. So basically doesn't matter where u get the apk you can usually install it to the shield some apps wont display properly which is why I suggested an orientation type program to correctly display and use also be aware some apps might need a mouse or keyboard to function properly when you do this depending on what you install.
Click to expand...
Click to collapse
Many thanks.
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
DBCAB said:
I have the 2015 pro model NVIDIA shield, but do have access to a 2017 model at my brother in laws, anyway extracting apks or getting them from places like apk mirror then using a usb to install will work you can even install them over your network from your pc or laptop using a file explorer program that supports it. I have never tried installing the full play store on my shield as it comes with one, however I have tried to install things using a pc browser and the google play site to the shield and had some luck installing a few apps that are not available on the shields version of play store. So basically doesn't matter where u get the apk you can usually install it to the shield some apps wont display properly which is why I suggested an orientation type program to correctly display and use also be aware some apps might need a mouse or keyboard to function properly when you do this depending on what you install.
Click to expand...
Click to collapse
Thank you!
have you tried the Aurora store? i find stuff there ibcant find in tv play store
elliwigy said:
have you tried the Aurora store? i find stuff there ibcant find in tv play store
Click to expand...
Click to collapse
elliwigy suggested the best way to have full playstore, Aurora is a frontend for the real playstore, you are not downloading from an unknown source and also allow to install and validate the apps that you have purchased, also it's possible to spoof your shield as other devices making possible to install apps that in other ways aren't available for your device
Hi
it is a long time ago.
Lastweek I got the fireTV update on the Amazon echo show 15. Without this change/update no chance for me to sideload apks. Funny is before the update the firmware is V7.5.5.5 and after firetv installation it is V7.5.0.1. Don't ask me why. Maybe they drunk to much.
But it took me 20 min to find a workaround to sidekoade apks.
@Amazon_Devs: Stop reading here. DO NOT BLOCK this workaround, make the launcher selectable again and bring the same Dev functions like on fireTV! THANK YOU!
I am not responsible for any damage or warranty loss
So end of the political messages.
For the first apk i would install Firefox apk(with it you can download more apps more comfortable)
1. Open FireTV Icon
2. Open appstore
3. Get Downloader, Totalus (launcher) and Total comander from Amazon fireTV appstore
(All the Apps do not work with touch.)
4. Open App Downloader
5. Select with onscreenremote "Browser"
6. Look for a page where you can get Firefox apk. I used uptodown
7. Download the apk (i recomend Firefox)
9. Go to total comander
10.Move with total comander the downloaded file from path Downloader to Downloads
11. Open totalus launcher
12. Open the blue folder (system file explorer)
13.Klick on Downloads
14. There should be your downloaded apk.
15. Install it
Ok done
When you install Firefox nextime you will have a browser which support touch functionality and when you download the next APK it will be directly stored in the Folder Downloads
Then just repeat the last steps 11-15.
Limitations:
Getting permissions is like Russian roulette storage is no problem. Special rights or higher permission can't confirmed in the system settings.
Dev options are available but it is the same **** as before.
Ok so now to the use cases:
I use this (now) awsome 15.6 zoll screen in my citchen to controll everything via homeassistant.
If you a owner of a Fritzbox Cable you can install Fritz TV apk direktly from AVM and you get a nice TV.
Homeassistant (you can enable in the app settings stay activ)
Spotify
Firefox
Total comander as an apk (not the Amazon appstore version. Remove it and install total comamder apk and you can controll it with the touchscreen)
I tired Nova launcher and Microsoft launcher
F DROID Can't install apks
Playstore (I think they have put playstore on a apk blacklist)
Uptodown can't install apks
There is some days ago another manual the suggested using Makrodroid for automations. May Tasker as well.
Also a APK which creates a storage via wifi. So with it you can transfere files from a PC to the echo show and the other way round.
Open Points:
I installed Wolf Launcher aka launcher Manager for FireTV. This launcher request the standard app for Settings.
When someone here is able to create a app which request the standard settings app and will open a selectable app like a launcher or whatever. The settings button can converted to a custom shortcut.
A custom linageOS ROM would be nice but I think
the kernel source for CPU AZ2 (some informations about processor) is not released and there is no way right now to install twrp. Correct me if I am wrong.
Some more blabla:
Echo Show 15 opened: teardown echo show 15
Her is written the hardware price is 309 Dollar. I bought it during blackweek for 199 and if you have a old echo you can make a trade in and you can get 25% discount on top.
Sideloaded apks listed in firetv as grey/black fields so you don't know which app is the correct one.
This could a workaround: Workaround icons
I also bought the usb network adapter to connect the device by LAN and I am thinking about a POE powersupply it.
There are two more guides out there:
Guide 1
Guide 2
Appdownloader became unavailable yesterday morning - if you try to install it the icon doesnt say GET - it just says unavailable. Any other workarounds for adb?
Hi
May the wifi ftp app could work or the other Downloader App but both are not for free or do it like in Guide2
I used the WiFi Transfer app in the store - then you can use the built in File Manager thats on the Show to install the APK's - Since they removed Downloader, this way is the second way to do it - and a little tougher to disable without a firmware update, assuming they remove the built in File Manager to install apps.
Robotica72 said:
I used the WiFi Transfer app in the store - then you can use the built in File Manager thats on the Show to install the APK's - Since they removed Downloader, this way is the second way to do it - and a little tougher to disable without a firmware update, assuming they remove the built in File Manager to install apps.
Click to expand...
Click to collapse
So, I am really new at this for the Show 15, but I am learning.
The wifi transfer app worked to get my apk on the show 15 and I used Total Commander to move it to the Downloads folder.
When I install it though it doesn't show up, as if it didn't install.
I don't remember what other app I used to try to install it, but at some point I got a message saying that I didn't have permission to install apps from unknown sources.
What am I doing wrong?
You need to use an app that is a trusted installer - the original method worked since Downloader has this, but all the other file managers do not. So, using Total Commander and go to system apps (scroll down a bit on the left side) - Open system apps and then on the right hand side, scroll down to File Manager (it may just say file). Then Click the virtual remote enter button and hold it for a bit, after about 2 seconds the upper right hand corner will show a new icon, it will be the first icon in the 4 icons in the upper right. Using the remote clik the new click and it will open up the File Manager - Install from there
Robotica72 said:
You need to use an app that is a trusted installer - the original method worked since Downloader has this, but all the other file managers do not. So, using Total Commander and go to system apps (scroll down a bit on the left side) - Open system apps and then on the right hand side, scroll down to File Manager (it may just say file). Then Click the virtual remote enter button and hold it for a bit, after about 2 seconds the upper right hand corner will show a new icon, it will be the first icon in the 4 icons in the upper right. Using the remote clik the new click and it will open up the File Manager - Install from there
Click to expand...
Click to collapse
Thanks so much for working with me on this.
When I open Total Commander there is a list on the left.
The last one is - Installed apps
In that folder there is a File Explorer 1.681A and one that I think I downloaded - File Explorer for Fire Tablets & TV (File Manager App) 1.0
Using my Fire TV remote and holding down the ENTER button a menu pops up:
Launch app(main function)
Copy via bluetooth
Delete
Properties
Copy to clipboard
Sent to
Open with...
What am I doping wrong?
No Problem - this is the part you need - Use TV File Manager - That has the systems app option, its the in the play store...
It will have the system files on the left
Robotica72 said:
No Problem - this is the part you need - Use TV File Manager - That has the systems app option, its the in the play store...
It will have the system files on the left
Click to expand...
Click to collapse
With TV File manager I get "For your security your tablet is not allowed to install unknown apps from this source". There is a "settings" that shows up with the message, but when I click that it just goes back to the TV File Manager screen. Ugh
Any other suggestions?
HypnoticGuy said:
With TV File manager I get "For your security your tablet is not allowed to install unknown apps from this source". There is a "settings" that shows up with the message, but when I click that it just goes back to the TV File Manager screen. Ugh
Any other suggestions?
Click to expand...
Click to collapse
Oh wait. Still trying something.
HypnoticGuy said:
Oh wait. Still trying something.
Click to expand...
Click to collapse
So, when I go to "System Apps" in TV File manager, then "Files" it
HypnoticGuy said:
Oh wait. Still trying something.
Click to expand...
Click to collapse
I got it!! Thank you soooo much!
You're my hero! This is great!
Excellent - Glad you got it working... I ordered another one since this works, hoping it gets here quickly before Amazon figures this one out and disables it in some update. I think it would require an entire system update to disable since its a system app.
Hi,
I've try to install something since Downloader is KO but.... how what dit you (@HypnoticGuy ) do to install it ?
tried installing the same way but there is a new message "unable to install apps from unknown source".
Is there any way around this? seems like Amazon blocked it all.
need to know before sending it back as it is useless for me if I cannot side load anything on this...
When do you get the error that you cant install apps from an unknown source? I can still sideload apps using the built in, system file manager, but I havent updated since it worked (assuming Amazon did updates)
Amazon updated and removed the built in file manager so you can no longer install APKs by opening them with it. I’m not sure what to do now and may just return mine until this gets sorted out. Wish I could downgrade the OS, but it seems unlikely
adb sideloading may be one idea, but enabling developer options does not show adb debugging menu anymore.
Hello everyone,
I got an Echo Show 15 as a gift for Christmas and then brought it to the software version at the time. So Firetv was on it but I didn't do anything else and since I still haven't tackled the wall mounting with cabling, it hasn't been switched on since then.
My question would be: Is there a way to block it so that I can install the kiosk browser or will it still force the update on me?
I have Pi Hole but have no idea what to set there!
Of course, I don't dare to put the device into operation now either
does anyone know?