Related
【STOCK】i896 Rogers Warranty ROMS (10/30/11)【ODIN3】【ODIN 1CLICK】
NEW!!! Odin One-Click Packages, MADE BY ME! Added below!
The NON one-click packages are the result of the hard work of user nzahorchak (spank his Thank-you button)
Click to expand...
Click to collapse
These are tried tested and true. and with odin 1.5 or newer very stable to flash. ei odin doesnt hang.
Click to expand...
Click to collapse
This Post contains the files for 2.1- i896UXJI2 AND 2.2 - i896UXJL1 AND 2.3.3 - i896UXKH2 version of this fixed stock ROM.
SGH -i896 wiki - VERY USEFUL INFO if you haven't seen already.
ALL original "stock" flashes for rogers are missing:
dbdata.rls - if you used pit, you screwed yourself.
i896 -boot-screen replacement. - if you flashed ATT stock, you got stuck with "world phone" boot-screen.
we have a COMPLETE Odin flash-able 2.1, 2.2 and 2.3.3 Rogers stock ROMS that will:
have NO dbdata / mounting error on reboot when using pit/re-partition in Odin
REMOVES ATT boot logo !!!!! yeah the first one! AND NOT WITH THE RENAME PICTURE TRICK
FULLY WARRANTY PASSABLE (root locked, but will not undo SIM lock but you will have backup files for that.)
1 minor issue - some users claimed to not have APN settings after flashing. Apn settings let you connect to the internet and send MMS messages on your phone. if you need them.... APN Settings HERE
the 2.1 is named Toronto because that's where nzahorchak is from, and not to cause confusion because the zip file is 145mb and had the same original name and size of THE STOCK ROM that screwed so many of us! all the files in the .tar are different.
Click to expand...
Click to collapse
========================================
INSTRUCTIONS - for those who might need them.
Download and install " APN Backup and Restore " from market and backup APN settings.
Unzip files to one location
Boot phone into download mode. (Powered OFF, hold VOL UP & DN, plug in USB)
Open Odin3 1.xx flashing utility (NOT ODIN3 ONE CLICK RESTORE TO STOCK)
Use the ROM.tar file from the stock ROM .zip in PDA box of ODIN
**Use the 512 .pit file that came with odin3 and check re-partition and check auto-reboot. PIT FILE IS A MUST IF YOU HAVE FLASHED ANY CM7 ROM!!!!! If NOT , pit should NOT be needed.
Click start.
Download " APN Backup and Restore " and Restore APN settings.
or... APN Settings HERE
3 NOTES !!
IF the phone gets stuck at the Rogers boot logo and does not fully boot, re-boot into stock recovery, select "erase user data" + "erase cache data", re-boot. BE PATIENT before you assume this has happened to you!!15 minutes at least. First kernel or ROM boot ALWAYS takes a while! I personally have never had to do this!
Some people claim you must plug in the USB after starting Odin, i had no issues both ways. If the box turns YELLOW, and your files are selected, you are good to go. USB Cable must be plugged into Computer though (yes i was asked)
I generally flash with my sim and SD card removed, it is not necessary but the SD card did cause me to hang in one situation before, so i just always remove it to be safe.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
here are the 2.1 - i896UXJI2 STOCK ROM links...
http://dl.dropbox.com/u/19201431/Files/I896UXJI2 TORONTO.zip
OR
http://dl.dropbox.com/u/20958367/I896UXJI2 TORONTO.zip
OR
http://www.megaupload.com/?d=DUY2P7JI
OR
http://www.megaupload.com/?d=84SKQV0F
here are the 2.2 - i896UXJL1 STOCK ROM links...
http://forum.xda-developers.com/showthread.php?t=1007276
pit file is included in Odin packages attached below
Any of the odin3s below will work. 1.81 and up now has bootloader option though we dont use that option yet, but it is more stable. Newer is Better!
2.3.3 STOCK! from rogers no changes. DO NOT USE .PIT FILE WITH THIS STOCK! if you need to repartition use 2.2 with pit file then upgrade to 2.3.3 with NO PIT FILE!!!
ALSO, IT CONTAINS BOOTLOADERS!! necessary to upgrade to gingerbread!
this is THE FILE keis used.
The rom below will NOT fix an ATT bootscreen issue, rogers did not change their params.lfs partition so it is not in the rogers keis update. To FIX ATT Bootscreen flash THIS FILE in odin PDA box before or after 2.3.3 stock.
LINK UPDATED .MD5 checksum PASS
http://hotfile.com/dl/130585492/8ca639c/SGH-I896_RWC_I896UXKH2.rar.html
PASSWORD: sampro.pl
ODIN ONE CLICKS NOW AVAILABLE!!!
Click to expand...
Click to collapse
NOTE: These packages do not set pit file, or re-partition (same thing), as setting pit was casuing LOTS of failed flashes, and if it fails as it sets pit, you loose the download picture, and it APPEARS bricked but odin will still see the phone (and turn yellow) if you put it in download mode, even with a blank phone screen.
Instructions:
#1 preform factory reset! MUST DO! - if you are unable to do this FIRST, do it immediately after flashing! you will get bootloops without wiping data!
-boot into recovery and select factory reset or clear user data
-or select factory reset from within android operating system settings
#2 Run ODIN one click (version of choice) - odin must be opened before plugging in phone
#3 Boot into download Mode
- with phone OFF, hold both volume buttons, plug USB into phone from pc
#4 Click START
#5 Wait! it should take about 5 minutes, then it will reboot itself!
If the process hangs, and IT DOES (usually at the start) close odin, take battery out of phone, put back in and restart odin, reboot phone into dl mode, try again. HOPE TO GOD it doesnt hang on boot.bin or sbl.bin on the one package containing Bootloaders. Bootloaders are required to upgrade a phone to gingerbread, but they work with older versions and there is no way to tell, so there is no reason to downgrade ever, and it is unnecessary to ever flash them again, maybe until ICS (lol)
with the old packages some users claimed to not have APN settings after flashing. Apn settings let you connect to the internet and send MMS messages on your phone. if you need them....
APN Settings HERE
Click to expand...
Click to collapse
Odin3 One-Click ROGERS packages!
2.1 update 1 Eclair
http://www.mediafire.com/?b8bq0i6lwdr3dzw
http://db.tt/ts8r8Opt
2.2 Froyo
http://www.mediafire.com/?pl2arpndghuashe
http://db.tt/9fEaDDH2
2.3.3 Gingerbread WITH bootloaders
http://www.mediafire.com/?5rcofbzusoor6mv
http://db.tt/mXSwWwUk
2.3.3 Gingerbread NO Bootloaders
http://www.mediafire.com/?a2czpn1xcxtq189
http://db.tt/r9dMJ3Br
The 2.1 and 2.2 updates dont set your APN settings, set manually with these settings:
APN Settings HERE
Click to expand...
Click to collapse
Click to expand...
Click to collapse
You sir, are the man. I will try this asap. I really hope it works. For some reason that AT&T logo makes me feel cheap and dirty .
Thank you for your hard work Nzahorchak.
EDIT: I've never got into dropbox... do I have to do it from my phone via the dropbox app? If so can we have a hosted link?
Oh... It's probably not up yet... I forgot to synch my XDA time I think... says 2:30am... It's 5:30pm where I am... the link is probably not up yet.
great job , any ways you can put this in a cwm zip while your at it ?
j/k or am I ?
You are surrounded by cheap att users. I am one of them minus the cheap
backdownup said:
You sir, are the man. I will try this asap. I really hope it works. For some reason that AT&T logo makes me feel cheap and dirty .
Thank you for your hard work Nzahorchak.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using XDA App
adamholden85 said:
You are surrounded by cheap att users. I am one of them minus the cheap
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I didn't say AT&T users were cheap. I said the logo made ME feel that way as a canadian.
/calm down
I JUST USED IT. BEFORE POSTING! IT WORKS! full NO ATT ROGERS STOCK.
doing TiBu restore now on my phoenix 4.5 with darfire blue!
backdownup said:
EDIT: I've never got into dropbox... do I have to do it from my phone via the dropbox app? If so can we have a hosted link?
Oh... It's probably not up yet... I forgot to synch my XDA time I think... says 2:30am... It's 5:30pm where I am... the link is probably not up yet.
Click to expand...
Click to collapse
just click the link now, it may have not been done uploading.
you dont need to "get into" dropbox. just click the link and it should download!
DAGr8 said:
great job , any ways you can put this in a cwm zip while your at it ?
j/k or am I ?
Click to expand...
Click to collapse
i wouldnt know how to do that, and make sure EVERYTHING turns out right. well... not today at least.
but someone else might be able to before i would learn how.
IMPORTANT PARTS TO THIS ODIN WORKING ARE: dbdata.rfs and param.lfs, maybe more...
backdownup said:
You sir, are the man. I will try this asap. I really hope it works. For some reason that AT&T logo makes me feel cheap and dirty .
Thank you for your hard work Nzahorchak.
Click to expand...
Click to collapse
You're welcome. That's exactly why I put the hours in to create this... well, that and warranty purposes, lol. I guess I should have shared this sooner. I'm no developer and somewhat new to Android, so it took some time.
nzahorchak said:
you're welcome. That's exactly why i put the hours in to create this... Well, that and warranty purposes, lol. I guess i should have shared this sooner. I'm no developer and somewhat new to android, so it took some time.
Click to expand...
Click to collapse
spank his button!!!!
nzahorchak said:
You're welcome. That's exactly why I put the hours in to create this... well, that and warranty purposes, lol. I guess I should have shared this sooner. I'm no developer and somewhat new to Android, so it took some time.
Click to expand...
Click to collapse
Glad you are on here. Thank you for addressing an otherwise overlooked problem that really bothered a lot of Canadian captivate users. I've done many google/xda searches for removal tools but they all seemed super sketchy.
Your time and hard work is appreciated, I'm sure not only by me, but by every canadian captivate user that's had to flash back to "stock".
Trusselo said:
spank his button!!!!
Click to expand...
Click to collapse
Just don't spank it too hard, we wouldn't want the site to crash.
nzahorchak said:
Just don't spank it too hard, we wouldn't want the site to crash.
Click to expand...
Click to collapse
nobody ever suspects the canadian takedown!
or the spanish inquisition....
oops did i bump that?
DAGr8 said:
great job , any ways you can put this in a cwm zip while your at it ?
j/k or am I ?
Click to expand...
Click to collapse
I'd love to, but seeing as I just started reading up on how the update-script works this evening, maybe we can find someone willing to throw one together for us.
just added megaupload link
and did a pretty good update to the i896 XDA wiki
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SGH-I896
Hey! Thanks for posting this! I've been trying to figure it out for the longest time and just gave up.
I was wondering if the APN settings can be manually inputted after flashing back to stock without using APN Backup and Restore? Or are there issues/crashes when attempting to input with APN B&R?
Thanks again!
TheShamsMan said:
Hey! Thanks for posting this! I've been trying to figure it out for the longest time and just gave up.
I was wondering if the APN settings can be manually inputted after flashing back to stock without using APN Backup and Restore? Or are there issues/crashes when attempting to input with APN B&R?
Thanks again!
Click to expand...
Click to collapse
You can input the APN settings manually without any issues. I haven't tried APN B&R. These are the ones I use (for Rogers) and I've included Fido's for Fido users' convenience.
Rogers Access Point Settings
APN: rogers-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 720 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>
Fido Access Point Settings
APN: fido-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.11.13
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 370 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>
I used APN backup and restore. and had no issues, and i see no reason why manually entering would cause issue either. Titanium Backup can also backup and restore your APN settings.
FULLY WARRANTY PASSABLE (root locked, but will not undo SIM lock but you will have backup files for that.)
Click to expand...
Click to collapse
I have a I896 now on FF 2.4 used a ODIN that gave me the AT&T boot screen etc. I am unlocked rooted etc can you elaborate on your point above in the quote? I have used tibu on every back up the apps only. So if I use this ODIN will I loose my sim unlock? Not totally sure what you mean. Or where and what files to make sure it stays unlocked?
Thanks and great work, we do need this for the "just in case"!
read the quote again.... "but will NOT undo sim unlock" most unlock methods (for canadian captivates) swap out a file and back up your original if you want to Lock it again. I used "Galaxy S unlock" from the market. root method.
**Canadian captivates dont have the unlock code stored in them, thats why root is required for us so it can do the file swap method. By law in Canada your carrier must give you the unlock code if you request it but they can charge you, this is to prevent them from FORCING you to pay roaming charges when travelling abroad.
so, it stays unlocked for the sim but root gets locked again.
Okay I think I understand. I paid and got a sim unlock code, so I think I will be okay. I will check when I get home with my American sim card since I have rooted and romed since the unlock.
hello i was wondering if there is a way to unlock the sim on the xt907 after the kitkat update? i used the exploit to sim unlock this phone before so it could be used on straight talk. my brother updated it to kitkat and now the sim is locked again. is there anyway to redo the process or downgrade back down to jellybean so i can use the exploit again? any help would be awesome.
The procedure is the same you used before. It worked for me.
my copy of cdma workshop 2.7 locks up when i enter the spn and click send? does the phone have to be in regular boot, ap fastboot? cause i dont remember and the video dont say
georgia411 said:
my copy of cdma workshop 2.7 locks up when i enter the spn and click send? does the phone have to be in regular boot, ap fastboot? cause i dont remember and the video dont say
Click to expand...
Click to collapse
Should be in BP Tools Mode.
Video: https://www.youtube.com/watch?v=b7-Kbm1_enM
Guide: http://forum.xda-developers.com/showthread.php?t=2487863
carb0nrain said:
Should be in BP Tools Mode.
Video: https://www.youtube.com/watch?v=b7-Kbm1_enM
Guide: http://forum.xda-developers.com/showthread.php?t=2487863
Click to expand...
Click to collapse
i got it in bp mode and when i enter the spc it freezes up but i can connect the phone via port fine just when i send the code i locks up
georgia411 said:
i got it in bp mode and when i enter the spc it freezes up but i can connect the phone via port fine just when i send the code i locks up
Click to expand...
Click to collapse
Are you sending the code "000000" (6 zeros)? I actually just unlocked mine successfully. I didn't use any of the downloads that he gave. I used the demo of CDMA Workshop (currently v3.9.0) and the drivers package from motorola's website. Try using those. It appeared to work for me.
carb0nrain said:
Are you sending the code "000000" (6 zeros)? I actually just unlocked mine successfully. I didn't use any of the downloads that he gave. I used the demo of CDMA Workshop (currently v3.9.0) and the drivers package from motorola's website. Try using those. It appeared to work for me.
Click to expand...
Click to collapse
yes just tried with 3.9.0 and say device does not answer
georgia411 said:
yes just tried with 3.9.0 and say device does not answer
Click to expand...
Click to collapse
Is usb debugging enabled? Also list all the steps used to replicate the problem.
240
carb0nrain said:
Is usb debugging enabled? Also list all the steps used to replicate the problem.
Click to expand...
Click to collapse
i had tried another tutorial on downgrading that involved flashing the boot.img so i downloaded the kitkat files from moto and got that all fixed.
ive got the phone in bptools
i start workshop 3.9.0
it connects to the com port
i click secuirty and enter six 0's and it says device fails to answer
georgia411 said:
i had tried another tutorial on downgrading that involved flashing the boot.img so i downloaded the kitkat files from moto and got that all fixed.
ive got the phone in bptools
i start workshop 3.9.0
it connects to the com port
i click secuirty and enter six 0's and it says device fails to answer
Click to expand...
Click to collapse
Hmmm. That is interesting. The only thing that i can think of is your QC diagnostic driver may be corrupted somehow? Did you follow the video tutorial (https://www.youtube.com/watch?v=mm2NKdXdHnc) to install it? Also can you post a screenshot with your device manager open while your phone is connected in bp tools mode. In you device manager expand the "Other Devices" tab.
carb0nrain said:
Hmmm. That is interesting. The only thing that i can think of is your QC diagnostic driver may be corrupted somehow? Did you follow the video tutorial (https://www.youtube.com/watch?v=mm2NKdXdHnc) to install it? Also can you post a screenshot with your device manager open while your phone is connected in bp tools mode. In you device manager expand the "Other Devices" tab.
Click to expand...
Click to collapse
im gonna try reinstalling the drivers, i forgot how to delete them though do you know the location cause they arent under installed programs
georgia411 said:
im gonna try reinstalling the drivers, i forgot how to delete them though do you know the location cause they arent under installed programs
Click to expand...
Click to collapse
Under installed programs, look for a name that begins with Motorola. Good Luck. If it isn't under installed programs, then I don't think they are installed. If so, go grab the official drivers from here: http://www.mymotocast.com/download/MDM?platform=windows
carb0nrain said:
Under installed programs, look for a name that begins with Motorola. Good Luck. If it isn't under installed programs, then I don't think they are installed. If so, go grab the official drivers from here: http://www.mymotocast.com/download/MDM?platform=windows
Click to expand...
Click to collapse
ok thanks for all the help, i think ive made progress. i switched the cable i was using with my brothers razr m with my blu studio 5.3s cable and loaded up cdma workshop 2.7 and i was able to do all the steps. another issue i found is the other cable wasnt letting me install the qc interface. so now i gotta wait for him to come over and put in his straight talk sim and hopefully we are back in business with it . ill let you know how it goes when hes able to come over
thanks again
georgia411 said:
ok thanks for all the help, i think ive made progress. i switched the cable i was using with my brothers razr m with my blu studio 5.3s cable and loaded up cdma workshop 2.7 and i was able to do all the steps. another issue i found is the other cable wasnt letting me install the qc interface. so now i gotta wait for him to come over and put in his straight talk sim and hopefully we are back in business with it . ill let you know how it goes when hes able to come over
thanks again
Click to expand...
Click to collapse
No problem, glad I was able to help. Have a good rest of your day. Hopefully everything works out.
thanks, much and you have a good one as well.
just to recap for anyone else having this issue here goes what was wrong.
the issue: droid razr m xt907 on straight talk updated to 4.4 and service was lost
first thing make sure all your drivers are installed. in you have the phone plugged in and you dont see QC Interface then uninstall all and reference the links listed above in the other replies (or i may have them listed if i edit)
now make sure your usb cable is working, the one for this phone would not work properly for this so the blu studio 5.3s cable worked great. make sure you have cdma workshop and the spn code is "000000" aka six zeros.
follow all the steps in the tutorial and you should be up and running. this phone does work on straight talk if you follow the tutorial.
carb0nrain said:
No problem, glad I was able to help. Have a good rest of your day. Hopefully everything works out.
Click to expand...
Click to collapse
hey buddy i put the sim card in today and it wont work i done everything by the tutorial and it writes the file. when the phone restarts if i do a network search it shows ATT but it will not connect. any ideas?
georgia411 said:
hey buddy i put the sim card in today and it wont work i done everything by the tutorial and it writes the file. when the phone restarts if i do a network search it shows ATT but it will not connect. any ideas?
Click to expand...
Click to collapse
Yeah, I think the problem is that it knows that its ATT but it doesn't know what to do with the connection. You probably have to set a manual APN setting. Go to Settings-->Wireless&Networks-->More-->Mobile Networks-->Access Point Names-->Add Button(Upper Right Corner)
Use the following values:
NAME: (type anything you like, this doesn't matter. Use "AT&T Phone" or "My Phone", something like that. Just remember that every access point you create should have a different name.)
APN: wap.cingular
Proxy: (not set)
Port: (not set)
Username: [email protected]
Password: CINGULAR1
Server: (not set)
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication Type: (not set)
APN type: (not set)
APN protocol: IPv4
APN: enabled (may need to check this, not sure about your model)
Bearer: unspecified
*DOUBLE CHECK SPELLING*
These values may not work. They were just the first ones i saw. If they don't work, then i will look for a new set of values.
If they dont work, also try the same settings with the username and password blank
When its added make sure you click on it in the access point names list.
Also go back from the access names list and make sure your "Prefferred Network Type" is set to Global.
Hopefully this works for you.
Does GSM mode with APN settings still work in 4.4.2
I have a Verizon RAZR M running on stock 4.1.2 + root + Xposed. I am using a GSM sim on my phone and I'm getting HSPA+ data (so I guess my phone is "unlocked" as I can use another carrier).
My question is does the 4.4.2 ROM support GSM mode and can we add/edit apn in the 4.4.2 rom?
You can edit/add APNs on 4.4.2 and I'm pretty sure you can use GSM on a 4.4.2 ROM.
Sent from my DROID RAZR M using XDA Free mobile app
Razr M Kitkat Straight Talk AT&T sims
I updated to KitKat 4.4.2. and my service stopped. I used Radiocomm to set the NV to 00. I failed at least three times. You have to enable developer options, usb debugging and boot up in Factory mode. Follow the instruction that have been poster on this form = http://forum.xda-developers.com/showthread.php?t=2166542 After I changed the NV I always pressed the restart button. After the phone has rebooted, unplug it and turn it off. Close Radiocomm and open Radiocomm up again. Boot phone back up in Factory mode and connect back usb to Radiocomm. Read the NV again. If it still 00, it has worked. Radiocomm, like people have said, will not see your phone unless usb debugging and Factory mode have not been set. My only complaint is that JB worked prefect and KK has the "Modem Fast Dormancy Monitor Service" screw up. Me and my wifes phone both are effected by this. Our JB battery life was real good. Now we both have reboots 2 or 3 times a day. My battery was dead one morning. I have found no help for this. Good luck with your phone. My Straight Talk AT&T service is really good. Fast Dormancy errors will make me buy some another phone unless Motorola issues a fix. I'm not going to hold my breathe!
Hello There!!
I was trying to get back to stock rom
And Always Getting this no space error 5069 While Flashing
After searching i found that format will fix this and i can flash like a charm
But after formatting my Device Is dead
no boot, no charging, no recovery
I'm Trying TO whole flash but I'm there is no option for that only Getting without bootloader one
Then i've checked it memory in memory test option now i'm getting
Nand Flash Not Detected
Plz!!! tell me what i can do to take my phone back to life
The Phone is out of warrenty
Same thing happend with me.
Use format+download all in SPFlashTool (with the same stock ROM), then do a firmware upgrade in SPFT with the same ROM.
Shahbaz23 said:
Use format+download all in SPFlashTool (with the same stock ROM), then do a firmware upgrade in SPFT with the same ROM.
Click to expand...
Click to collapse
Thanks for replying, i almost lost my hope of fixing this problem
Now after trying it says:
1) after format+download it says no space error
2)then i tried firmware upgrade i'm getting " Failed to get PMT info " and "Invalid partition table" error in spft v3.xx
I've found many users are facing this problem, if it will fix here it will be great help for them
Just tell me what to do next
lexileone said:
Thanks for replying, i almost lost my hope of fixing this problem
Now after trying it says:
1) after format+download it says no space error
2)then i tried firmware upgrade i'm getting " Failed to get PMT info " and "Invalid partition table" error in spft v3.xx
I've found many users are facing this problem, if it will fix here it will be great help for them
Just tell me what to do next
Click to expand...
Click to collapse
K, Try this for a change...
Assuming u already have all the required drivers installed (get it via google search, if not), use the latest sp flash tool (it does matter), browse your scatter file (i recommend u use the Stock JB/KK/LP) and goto the format tab (next to the download tab) and do an auto format. Now goto the download tab and do a format all+download and finally firmware upgrade (all this without the battery)... Now start your phone. This works fine for me when my phone get soft-bricked. However u must remember that formatting all may have risk of your NVRAM getting formatted and so loss of IMEI, but you can always have it fixed via AT command.
Shahbaz23 said:
K, Try this for a change...
Assuming u already have all the required drivers installed (get it via google search, if not), use the latest sp flash tool (it does matter), browse your scatter file (i recommend u use the Stock JB/KK/LP) and goto the format tab (next to the download tab) and do an auto format. Now goto the download tab and do a format all+download and finally firmware upgrade (all this without the battery)... Now start your phone. This works fine for me when my phone get soft-bricked. However u must remember that formatting all may have risk of your NVRAM getting formatted and so loss of IMEI, but you can always have it fixed via AT command.
Click to expand...
Click to collapse
Thanks for replying :cyclops:
I was using spft ver 5.1516.00
while auto format i was getting errors, in v5 it says BROM ERROR: S_DL_READ_PT_FAILE(5073), only v3.1328 can format it successfully while others v3 are getting invalid range error[I think this place will give some clue of what's happening]
ok then in format+download section( using spft V5)
format 100%
boot loader 100%
just after few seconds again no space error
Now in firm-upgrade section
again error failed to get pmt info
thanks for trying mate
now I have some hope for this device to be fixed
i'm not worrying about imei
anybody there plz bring my phone back to life
Help Guys I'm waiting for Ur Replies
PLzz!!
lexileone said:
Help Guys I'm waiting for Ur Replies
PLzz!!
Click to expand...
Click to collapse
Given your desperate condition, go with this:
Re-install the drivers and spftool from here: http://d-h.st/7CL
Use a different USB wire (maybe your I/O port of USB wire is damaged, happened with me once).
Then retry the method listed above of formatting, downloading and upgrading.
Hope this helps.
P.S.: I am not an expert so I couldn't understand the errors, but looks like these are common errors so you should get your phone back alive. :good:
Shahbaz23 said:
Given your desperate condition, go with this:
Re-install the drivers and spftool from here: http://d-h.st/7CL
Use a different USB wire (maybe your I/O port of USB wire is damaged, happened with me once).
Then retry the method listed above of formatting, downloading and upgrading.
Hope this helps.
P.S.: I am not an expert so I couldn't understand the errors, but looks like these are common errors so you should get your phone back alive. :good:
Click to expand...
Click to collapse
still getting invalid Pmt error on firm upgrade
and no space in download
plz help
Facing the exact same problem with my phone too.. Someone please help.
Is there any senior members who can help us?
Make full format (including calibration data & boot loader) then flash with jellybean
Auto format not make full format some data is not earse . make full format then flash with jellybeam stock rom
(Use latest sp flashtool
Without battery
Check Usb pin & cable are rightly connected )
Chinmayhegde said:
Auto format not make full format some data is not earse . make full format then flash with jellybeam stock rom
(Use latest sp flashtool
Without battery
Check Usb pin & cable are rightly connected )
Click to expand...
Click to collapse
But how
i can't see format with bootloader option in format tab
Is there Any other way to do this(may be manual format will work, but dont Know How to do)
This problem needs to be solved
Well thanks for trying
I hope we will get rid of this problem soon
lexileone said:
But how
i can't see format with bootloader option in format tab
Is there Any other way to do this(may be manual format will work, but dont Know How to do)
This problem needs to be solved
Well thanks for trying
I hope we will get rid of this problem soon
Click to expand...
Click to collapse
are you triad manual format including calibration data?
Chinmayhegde said:
are you triad manual format including calibration data?
Click to expand...
Click to collapse
Yes, the format was successful but still get same errors while downloading
PLz guyz Help !!!
lexileone said:
Yes, the format was successful but still get same errors while downloading
PLz guyz Help !!!
Click to expand...
Click to collapse
Change your stock rom for flashing kitkat or jellybean / wiko_rainbowlollipop official stock rom
use older spflash tool
then also u get same error service center is a batter option
Chinmayhegde said:
Change your stock rom for flashing kitkat or jellybean / wiko_rainbowlollipop official stock rom
use older spflash tool
then also u get same error service center is a batter option
Click to expand...
Click to collapse
In service center people are saying its board fault and it have to be replaced (pricing 3K)
But i'm sure the board is working
its any other problem
Have u tried both versions of sptools .format and download should work.try a different cable.if nothings working try adb from pc
micromax a120 1931 said:
Have u tried both versions of sptools .format and download should work.try a different cable.if nothings working try adb from pc
Click to expand...
Click to collapse
Thankz tell me more about adb from pc
lexileone said:
Thankz tell me more about adb from pc
Click to expand...
Click to collapse
1. Download SP flash tool (I think you already have) and Smartphone multiport download tool = http://www.mediafire.com/?1ycvu9ywv7vjnhv.
2. Open and run as admin - SPMultiPortFlashDownloadProject.
3. Click file, open download agent name' and add 'MTK_AllInOne_DA.bin'.
4. Open factory database and select the .mdb file.
5. Click scatter file - and select the .txt scatter file.
6. Then the 'top three boxes (LCD and camera driver) . You click last - ???????? button and unlock it for changing driver parameters.
7. Remember the 1st box for back camera, 2nd box for front camera, 3rd box for display driver.
8. My recommended :
under sensor 1 selectv5647_raw
under sensor 2 select:hi704_yuv
under sensor 3 select:T050UWV014NS or if it doesnt work LM050AMYBO1E
(if doesnt work change again and again)
9. Select high speed and no battery (I think no need to do).
10. Simply close the Tool. then open, SP flash tool
11. Select scatter loading, and load the same 'scatter file' , which you previously opened in the 'multiport download tool'
12. SELECT 'UBOOT' ONLY AND NOT SELECT OTHER ALL PARAMETERS. THEN CLICK DOWNOAD.
Then reboot your phone and check... display is ok ?
If not ok, Then again open smartphone multiport download tool and change the display driver and do the same all things previously.
You have to do repeatly, until, you are getting display normal.
The same thing for camera's working also. Do this ..I doubt adb will work just temme if it fixes it...
Greetings, the story that follows is embarrasing for me since i ****ed it up 2 times already.
I accidentally deleted my /system/fonts folder and now it won't boot up anymore, then I tried to get into my recovery mode (3e) and i tried to "update from sdcard" and restore a stock ROM, the manager sees the update.zip file but once i try to install it, it gives me this output:
Code:
-- Install /sdcard ..
Installation aborted(APPLY_EXT).
. It gives me that for any ROM, either cusom or stock.
Not sure what is causing, am I using a wrong sdcard format (FAT32)?
Also, this is the first time when I change my ROM, or better said in this case unbrick it, I'm not even sure if changing the ROM restores the fonts folder, but I think worths a try?
Moreover USB debugging is off and I can't use ADB.
Thank you for reading my post and sorry for my awful grammar.
That is how I fixed my bricked HTC DESIRE 310
You need those files
This version of Sp_flashtools http://mediafire.com/file/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar (on others you will have DA_DOWNLOAD_FAIL)
This firmware Working FLAWLESS on my single SIM DESIRE 310
https://yadi.sk/d/2S6hrwSDcbM3t
iNSTRUCTIONS:
Turn off Phone
Click DOWNLOAD
Connect your Phone into your computer
And wait
After few minutes you`ll have completely fresh firmware
link not working
blscorpionbg said:
That is how I fixed my bricked HTC DESIRE 310
You need those files
This version of Sp_flashtools http://mediafire.com/file/eaar07r2nm1v7t6/SP_Flash_Tool_v5.1348.01_SEC.rar (on others you will have DA_DOWNLOAD_FAIL)
This firmware Working FLAWLESS on my single SIM DESIRE 310
https://yadi.sk/d/2S6hrwSDcbM3t
iNSTRUCTIONS:
Turn off Phone
Click DOWNLOAD
Connect your Phone into your computer
And wait
After few minutes you`ll have completely fresh firmware
Click to expand...
Click to collapse
Hi! I got bricked desire 310 too xD
but the link you gave isn't working. Can you send me this firmware please!
Well, I f*cked up.
Fastboot works, I can flash stock rom via Xiaomi Flash. Flashing completes without any problems. A notification about encypting phone shows up, at 3% it jumps to 100% and resumes boot. Now after each boot, phone freezes at "input your sim pin" and reboots. Over and over again. What can I try, please help :
edited
twister26 said:
There is an reward for whoever helps me solve this issue
Click to expand...
Click to collapse
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
dfranco51207 said:
u try put your sim on other phone and remove the pin from them , maybe the boot skip that part and dont get freeze
Click to expand...
Click to collapse
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
twister26 said:
no luck, removed sim and now it reboots as soon as android one text is displayed
I've also tried wiping cache in default recovery, no luck
Click to expand...
Click to collapse
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Let me guess. From Pie to Oreo or Nougat?
Mercoory said:
Let me guess. From Pie to Oreo or Nougat?
Click to expand...
Click to collapse
yes, exactly is there a thread already open somewhere here and i missed? last time TWRP was working, I even got a message "your system has been destroyed" or something like that.
sipollo said:
Try to format data in twrp or stock recovery.
If it does not work flash an android 8.0 or Nougat ROM. Do not lock the bootloader.
Click to expand...
Click to collapse
will try!
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
ccalixtro said:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Click to expand...
Click to collapse
will give it a read, it it works, I'll PM you and you'll give me your paypal address. Fair is fair.
can't unlock OEM, because I can't boot up to developer tools. great, just great. will try to fix that first.
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
fdc77 said:
if you can boot to fastboot try to flash stock pie 10.0.4.0 with miflash, after that your device should be able to boot, than unlock OEM and bootloader and downgrade to what version you want
Click to expand...
Click to collapse
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
twister26 said:
I can get to fastboot yeah, but MiFlash tool says that remote oem unlock is not allowed. So I'll probably have to open it up for EDL. Reboot to edl isn't working. Thanks for the advice tho.
Click to expand...
Click to collapse
i had a problem like yours, but i have flashed stock rom in non EDL mode and everything had start to work apart LTE band missing that i restored with qualcomm's tools
which stock rom have you try to flash? are you downgrading from oreo? bootloop on android one logo after downgrading is a common issue due to ARB (anti rollback protection)
twister26 said:
Whoever saves my precious Mi A1 gets 10$ on his paypal.
Click to expand...
Click to collapse
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
tropbel said:
This is ****
This is not XDA spirit
You can get help without to pay
Please cancel the reward, do it. For all the people on this community.
Click to expand...
Click to collapse
reward is cancelled from this point on i will reward the one who helped me so far tho. still working on solving the problem so winner has not been decided yet.
you don't understand.
There are no winners and no loosers.
You are free to donate to anyone you want, but your post boost and encourages a bad attitude.
If people start to solve only paid problems, the spirit of the community will be destroyed.
The problem is with the Pie specific partition table
I write the whole guide from memory, so it can differ a bit.... I skipped some steps ( erasing, reboot, fastboot mode, TWRP loading via fastboot, OEM unlock )
From previous writings I think you can know the skipped steps.
Keep in mind: It is dangerous, you can loose your IMEI ( it will only work again with Pie - or there are some writings at forum how can you manually change it. ).
Steps:
1 - Backup with TWRP (fastboot) efs,persist,modem & make copy to your computer and or to your cloud provider.
2 - Create a new folder in Internal Storage -> TWRP -> BACKUP -> With a new date directory ( the backup already made one, make a new folder, with different date )
3 - Download someone's older TWRP backup from xda (I cheated, I copied the following links ) :
(I'm still a new user, so can't directly write url's )
Mediafire : https COLON SLASH SLASH bit.ly SLASH 2QU5NtC
Mirror: Google Drive : https COLON SLASH SLASH bit.ly SLASH 2UN1DTo
4 - Unpack, and copy EFS to the folder created 2 point
5 - Fastboot TWRP -> Restore EFS
6 - Flash the Official latest firmware from en.miui.com ( If you want to make sure go with EDL mode )
7 - Now, the IMEI & Mac addresses are missing. Don't panic! Download update with System Updates.
8 - When you are on Pie again, restore your first TWRP (fastboot) persist partition
9 - One more System restore
At this time, you will have IMEI & Mac addressees, and hopefully a working phone.
Hope this helps. The same thing happened with me 2 weeks ago. This is how I solves it.
Thank you, I solved it yesterday. Hopefully this post will come in handy for other people!